/* * File : drv_i2c.c * COPYRIGHT (C) 2006 - 2017, RT-Thread Development Team * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * * Change Logs: * Date Author Notes * 2017-08-08 Yang the first version */ #include #include #include "board.h" #include "fsl_gpio.h" #include "fsl_lpi2c.h" //#define DRV_I2C_DEBUG #ifdef RT_USING_I2C #ifdef RT_USING_I2C_BITOPS #define I2CBUS_NAME "i2c0" struct stm32_i2c_bit_data { struct { GPIO_Type *base; uint32_t pin; } scl, sda; }; static void gpio_udelay(rt_uint32_t us) { volatile rt_int32_t i; for (; us > 0; us--) { i = 1000; while (i--); } } static void gpio_set_input(GPIO_Type* base, uint32_t pin) { if (base->GDIR & (1 << pin)) //output mode { base->GDIR &= ~(1 << pin); gpio_udelay(5); } } static void gpio_set_output(GPIO_Type* base, uint32_t pin) { if (!(base->GDIR & (1 << pin))) //input mode { base->GDIR |= (1 << pin); gpio_udelay(5); } } static void gpio_set_sda(void *data, rt_int32_t state) { struct stm32_i2c_bit_data *bd = data; gpio_set_output(bd->sda.base, bd->sda.pin); GPIO_PinWrite(bd->sda.base, bd->sda.pin, !!state); } static void gpio_set_scl(void *data, rt_int32_t state) { struct stm32_i2c_bit_data *bd = data; gpio_set_output(bd->scl.base, bd->scl.pin); GPIO_PinWrite(bd->scl.base, bd->scl.pin, !!state); } static rt_int32_t gpio_get_sda(void *data) { struct stm32_i2c_bit_data *bd = data; gpio_set_input(bd->sda.base, bd->sda.pin); return GPIO_ReadPinInput(bd->sda.base, bd->sda.pin); } static rt_int32_t gpio_get_scl(void *data) { struct stm32_i2c_bit_data *bd = data; gpio_set_input(bd->scl.base, bd->scl.pin); return GPIO_ReadPinInput(bd->scl.base, bd->scl.pin); } #else /* RT_USING_I2C_BITOPS */ // todo : add hardware i2c #endif /* RT_USING_I2C_BITOPS */ int rt_hw_i2c_init(void) { #ifdef RT_USING_I2C_BITOPS /* register I2C1: SCL/P0_20 SDA/P0_19 */ { static struct rt_i2c_bus_device i2c_device; static const struct stm32_i2c_bit_data _i2c_bdata = { /* SCL */ {GPIO1, 16}, /* SDA */ {GPIO1, 17}, }; static const struct rt_i2c_bit_ops _i2c_bit_ops = { (void*)&_i2c_bdata, gpio_set_sda, gpio_set_scl, gpio_get_sda, gpio_get_scl, gpio_udelay, 50, 1000 }; gpio_pin_config_t pin_config = { kGPIO_DigitalOutput, 0, }; CLOCK_EnableClock(kCLOCK_Iomuxc); IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 1U); IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 0xD8B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Enabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 22K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 1U); IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 0xD8B0u); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Enabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 22K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ /* Enable touch panel controller */ GPIO_PinInit(_i2c_bdata.sda.base, _i2c_bdata.sda.pin, &pin_config); GPIO_PinInit(_i2c_bdata.scl.base, _i2c_bdata.scl.pin, &pin_config); GPIO_PortSet(_i2c_bdata.sda.base, _i2c_bdata.sda.pin); GPIO_PortSet(_i2c_bdata.scl.base, _i2c_bdata.scl.pin); //RT_ASSERT(gpio_get_scl(&_i2c_bdata) != 0); //RT_ASSERT(gpio_get_sda(&_i2c_bdata) != 0); i2c_device.priv = (void *)&_i2c_bit_ops; rt_i2c_bit_add_bus(&i2c_device, I2CBUS_NAME); } /* register I2C */ #else /* RT_USING_I2C_BITOPS */ // Todo : add hardware i2c #endif /* RT_USING_I2C_BITOPS */ return 0; } INIT_DEVICE_EXPORT(rt_hw_i2c_init); #if defined(RT_USING_FINSH) && defined(DRV_I2C_DEBUG) #include static rt_device_t _i2c_find(const char *name) { rt_device_t dev; dev = rt_device_find(name); if (!dev) { rt_kprintf("search device failed: %s\n", name); return RT_NULL; } if (rt_device_open(dev, RT_DEVICE_OFLAG_RDWR) != RT_EOK) { rt_kprintf("open device failed: %s\n", name); return RT_NULL; } rt_kprintf("open i2c bus: %s\n", name); return dev; } static void _search_i2c_device(rt_device_t dev, uint8_t cmd) { int count = 0; struct rt_i2c_msg msgs[2]; uint8_t buf = 0; msgs[0].flags = RT_I2C_WR; msgs[0].buf = &cmd; msgs[0].len = sizeof(cmd); msgs[1].flags = RT_I2C_RD; msgs[1].buf = &buf; msgs[1].len = 1; for (int i = 0; i <= 0x7f; i++) { int len; msgs[0].addr = i; msgs[1].addr = i; len = rt_i2c_transfer((struct rt_i2c_bus_device *)dev, msgs, 2); if (len == 2) { count++; rt_kprintf("add:%02X transfer success, id: %02X\n", i, buf); } } rt_kprintf("i2c device: %d\n", count); } static int i2c_test(const char *name, uint8_t cmd) { rt_device_t dev = _i2c_find(name); if (dev == RT_NULL) { rt_kprintf("search i2c device faild\n"); return -1; } _search_i2c_device(dev, cmd); rt_device_close(dev); return 0; } FINSH_FUNCTION_EXPORT(i2c_test, e.g: i2c_test("i2c0", 0xA3)); #endif #endif /* RT_USING_I2C */