#ifndef __SWM320_PWM_H__
#define	__SWM320_PWM_H__

typedef struct {
	uint8_t  clk_div;		//PWM_CLKDIV_1、PWM_CLKDIV_8
	
	uint8_t  mode;			//PWM_MODE_INDEP、PWM_MODE_COMPL、PWM_MODE_INDEP_CALIGN、PWM_MODE_COMPL_CALIGN
	
	uint16_t cycleA;		//A路周期
	uint16_t hdutyA;		//A路占空比
	uint16_t deadzoneA;		//A路死区时长，取值0--1023
	uint8_t  initLevelA;	//A路初始输出电平，0 低电平    1 高电平
	
	uint16_t cycleB;		//B路周期
	uint16_t hdutyB;		//B路占空比
	uint16_t deadzoneB;		//B路死区时长，取值0--1023
	uint8_t  initLevelB;	//B路初始输出电平，0 低电平    1 高电平
	
	uint8_t  HEndAIEn;		//A路高电平结束中断使能
	uint8_t  NCycleAIEn;	//A路新周期开始中断使能
	uint8_t  HEndBIEn;		//B路高电平结束中断使能
	uint8_t  NCycleBIEn;	//B路新周期开始中断使能
} PWM_InitStructure;

#define PWM_CLKDIV_1	0
#define PWM_CLKDIV_8	1

#define PWM_MODE_INDEP			0		//A路和B路为两路独立输出
#define PWM_MODE_COMPL			1		//A路和B路为一路互补输出
#define PWM_MODE_INDEP_CALIGN	3		//A路和B路为两路独立输出，中心对齐
#define PWM_MODE_COMPL_CALIGN	4		//A路和B路为一路互补输出，中心对齐

#define PWM_CH_A	0
#define PWM_CH_B	1


void PWM_Init(PWM_TypeDef * PWMx, PWM_InitStructure * initStruct);			//PWM初始化
void PWM_Start(PWM_TypeDef * PWMx, uint32_t chA, uint32_t chB);				//启动PWM，开始PWM输出
void PWM_Stop(PWM_TypeDef * PWMx, uint32_t chA, uint32_t chB);				//关闭PWM，停止PWM输出

void PWM_SetCycle(PWM_TypeDef * PWMx, uint32_t chn, uint16_t cycle);		//设置周期
uint16_t PWM_GetCycle(PWM_TypeDef * PWMx, uint32_t chn);	   				//获取周期
void PWM_SetHDuty(PWM_TypeDef * PWMx, uint32_t chn, uint16_t hduty);		//设置高电平时长
uint16_t PWM_GetHDuty(PWM_TypeDef * PWMx, uint32_t chn);					//获取高电平时长
void PWM_SetDeadzone(PWM_TypeDef * PWMx, uint32_t chn, uint8_t deadzone);	//设置死区时长
uint8_t  PWM_GetDeadzone(PWM_TypeDef * PWMx, uint32_t chn);		 			//获取死区时长

void PWM_IntNCycleEn(PWM_TypeDef * PWMx, uint32_t chn);   					//新周期开始中断使能
void PWM_IntNCycleDis(PWM_TypeDef * PWMx, uint32_t chn);  					//新周期开始中断禁能
void PWM_IntNCycleClr(PWM_TypeDef * PWMx, uint32_t chn);  					//新周期开始中断标志清除
uint32_t PWM_IntNCycleStat(PWM_TypeDef * PWMx, uint32_t chn); 				//新周期开始中断是否发生
void PWM_IntHEndEn(PWM_TypeDef * PWMx, uint32_t chn); 						//高电平结束中断使能
void PWM_IntHEndDis(PWM_TypeDef * PWMx, uint32_t chn);						//高电平结束中断禁能
void PWM_IntHEndClr(PWM_TypeDef * PWMx, uint32_t chn);	 					//高电平结束中断标志清除
uint32_t PWM_IntHEndStat(PWM_TypeDef * PWMx, uint32_t chn);					//高电平结束中断是否发生


#endif //__SWM320_PWM_H__