/* * Copyright (c) 2006-2022, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2011-08-09 lgnq first version for LS1B DC * 2015-07-06 chinesebear modified for loongson 1c * 2018-01-06 sundm75 modified for smartloong */ #include #include "display_controller.h" #include "../../libraries/ls1c_pwm.h" #include "../../libraries/ls1c_public.h" #include "../../libraries/ls1c_gpio.h" #include "../../libraries/ls1c_pin.h" #if (defined PKG_USING_GUIENGINE) || (defined RT_USING_RTGUI) struct vga_struct vga_mode[] = { {/*"480x272_60.00"*/ 111000, 480, 482, 523, 525, 272, 274, 284, 286, }, {/*"640x480_70.00"*/ 28560, 640, 664, 728, 816, 480, 481, 484, 500, }, {/*"640x640_60.00"*/ 33100, 640, 672, 736, 832, 640, 641, 644, 663, }, {/*"640x768_60.00"*/ 39690, 640, 672, 736, 832, 768, 769, 772, 795, }, {/*"640x800_60.00"*/ 42130, 640, 680, 744, 848, 800, 801, 804, 828, }, {/*"800x480_70.00"*/ 35840, 800, 832, 912, 1024, 480, 481, 484, 500, }, {/*"800x600_60.00"*/ 38220, 800, 832, 912, 1024, 600, 601, 604, 622, }, {/*"800x640_60.00"*/ 40730, 800, 832, 912, 1024, 640, 641, 644, 663, }, {/*"832x600_60.00"*/ 40010, 832, 864, 952, 1072, 600, 601, 604, 622, }, {/*"832x608_60.00"*/ 40520, 832, 864, 952, 1072, 608, 609, 612, 630, }, {/*"1024x480_60.00"*/ 38170, 1024, 1048, 1152, 1280, 480, 481, 484, 497, }, {/*"1024x600_60.00"*/ 48960, 1024, 1064, 1168, 1312, 600, 601, 604, 622, }, {/*"1024x640_60.00"*/ 52830, 1024, 1072, 1176, 1328, 640, 641, 644, 663, }, {/*"1024x768_60.00"*/ 64110, 1024, 1080, 1184, 1344, 768, 769, 772, 795, }, {/*"1152x764_60.00"*/ 71380, 1152, 1208, 1328, 1504, 764, 765, 768, 791, }, {/*"1280x800_60.00"*/ 83460, 1280, 1344, 1480, 1680, 800, 801, 804, 828, }, {/*"1280x1024_55.00"*/ 98600, 1280, 1352, 1488, 1696, 1024, 1025, 1028, 1057, }, {/*"1440x800_60.00"*/ 93800, 1440, 1512, 1664, 1888, 800, 801, 804, 828, }, {/*"1440x900_67.00"*/ 120280, 1440, 1528, 1680, 1920, 900, 901, 904, 935, }, }; static volatile int fb_index = 0; rt_align(16) volatile rt_uint16_t _rt_framebuffer[FB_YSIZE][FB_XSIZE]; volatile rt_uint16_t _rt_framebuffer0[FB_YSIZE][FB_XSIZE]; volatile rt_uint16_t _rt_framebuffer1[FB_YSIZE][FB_XSIZE]; static struct rt_device_graphic_info _dc_info; static void pwminit(void) { pwm_info_t pwm_info; pwm_info.gpio = LS1C_PWM0_GPIO06; // pwm引脚位gpio06 pwm_info.mode = PWM_MODE_NORMAL; // 正常模式--连续输出pwm波形 pwm_info.duty = 0.85; // pwm占空比 85% pwm_info.period_ns = 5*1000*1000; // pwm周期5ms /*pwm初始化,初始化后立即产生pwm波形*/ pwm_init(&pwm_info); /* 使能pwm */ pwm_enable(&pwm_info); } int caclulate_freq(rt_uint32_t XIN, rt_uint32_t PCLK) { rt_uint32_t divider_int; rt_uint32_t needed_pixclk; rt_uint32_t pll_clk, pix_div; rt_uint32_t regval; pll_clk = PLL_FREQ; // 读CPU的 PLL及SDRAM 分频系数 pll_clk =( pll_clk>>8 )& 0xff; pll_clk = XIN * pll_clk / 4 ; pix_div = PLL_DIV_PARAM;//读CPU的 CPU/CAMERA/DC 分频系数 pix_div = (pix_div>>24)&0xff; rt_kprintf("old pll_clk=%d, pix_div=%d\n", pll_clk, pix_div); divider_int = pll_clk/(1000000) *PCLK/1000; if(divider_int%1000>=500) divider_int = divider_int/1000+1; else divider_int = divider_int/1000; rt_kprintf("divider_int = %d\n", divider_int); /* check whether divisor is too small. */ if (divider_int < 1) { rt_kprintf("Warning: clock source is too slow.Try smaller resolution\n"); divider_int = 1; } else if(divider_int > 100) { rt_kprintf("Warning: clock source is too fast.Try smaller resolution\n"); divider_int = 100; } /* 配置分频寄存器 */ { rt_uint32_t regval = 0; regval = PLL_DIV_PARAM; /*首先需要把分频使能位清零 */ regval &= ~0x80000030; //PIX_DIV_VALID PIX_SEL 置0 regval &= ~(0x3f<<24); //PIX_DIV 清零 regval |= divider_int << 24; PLL_DIV_PARAM = regval; regval |= 0x80000030; //PIX_DIV_VALID PIX_SEL 置1 PLL_DIV_PARAM = regval; } rt_kprintf("new PLL_FREQ=0x%x, PLL_DIV_PARAM=0x%x\n", PLL_FREQ, PLL_DIV_PARAM); rt_thread_delay(10); return 0; } static rt_err_t rt_dc_init(rt_device_t dev) { int i, out, mode=-1; int val; rt_kprintf("PWM initied\n"); /* Set the back light PWM. */ pwminit(); for (i=0; itype = RT_Device_Class_Graphic; dc->init = rt_dc_init; dc->open = RT_NULL; dc->close = RT_NULL; dc->control = rt_dc_control; dc->user_data = (void*)&_dc_info; /* register Display Controller device to RT-Thread */ rt_device_register(dc, "dc", RT_DEVICE_FLAG_RDWR); rt_device_init(dc); } #include #include "display_controller.h" /* initialize for gui driver */ int rtgui_lcd_init(void) { rt_device_t dc; rt_kprintf("DC initied\n"); pin_set_purpose(76, PIN_PURPOSE_OTHER); pin_set_remap(76, PIN_REMAP_DEFAULT); /* init Display Controller */ rt_hw_dc_init(); /* find Display Controller device */ dc = rt_device_find("dc"); /* set Display Controller device as rtgui graphic driver */ rtgui_graphic_set_device(dc); return 0; } INIT_DEVICE_EXPORT(rtgui_lcd_init); #endif