//***************************************************************************** // // usb.h - Prototypes for the USB Interface Driver. // // Copyright (c) 2007-2014 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 2.1.0.12573 of the Tiva Peripheral Driver Library. // //***************************************************************************** #ifndef __DRIVERLIB_USB_H__ #define __DRIVERLIB_USB_H__ //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // The following are values that can be passed to USBIntEnableControl() and // USBIntDisableControl() as the ui32Flags parameter, and are returned from // USBIntStatusControl(). // //***************************************************************************** #define USB_INTCTRL_ALL 0x000003FF // All control interrupt sources #define USB_INTCTRL_STATUS 0x000000FF // Status Interrupts #define USB_INTCTRL_VBUS_ERR 0x00000080 // VBUS Error #define USB_INTCTRL_SESSION 0x00000040 // Session Start Detected #define USB_INTCTRL_SESSION_END 0x00000040 // Session End Detected #define USB_INTCTRL_DISCONNECT 0x00000020 // Disconnect Detected #define USB_INTCTRL_CONNECT 0x00000010 // Device Connect Detected #define USB_INTCTRL_SOF 0x00000008 // Start of Frame Detected #define USB_INTCTRL_BABBLE 0x00000004 // Babble signaled #define USB_INTCTRL_RESET 0x00000004 // Reset signaled #define USB_INTCTRL_RESUME 0x00000002 // Resume detected #define USB_INTCTRL_SUSPEND 0x00000001 // Suspend detected #define USB_INTCTRL_MODE_DETECT 0x00000200 // Mode value valid #define USB_INTCTRL_POWER_FAULT 0x00000100 // Power Fault detected //***************************************************************************** // // The following are values that can be passed to USBIntEnableEndpoint() and // USBIntDisableEndpoint() as the ui32Flags parameter, and are returned from // USBIntStatusEndpoint(). // //***************************************************************************** #define USB_INTEP_ALL 0xFFFFFFFF // Host IN Interrupts #define USB_INTEP_HOST_IN 0xFFFE0000 // Host IN Interrupts #define USB_INTEP_HOST_IN_15 0x80000000 // Endpoint 15 Host IN Interrupt #define USB_INTEP_HOST_IN_14 0x40000000 // Endpoint 14 Host IN Interrupt #define USB_INTEP_HOST_IN_13 0x20000000 // Endpoint 13 Host IN Interrupt #define USB_INTEP_HOST_IN_12 0x10000000 // Endpoint 12 Host IN Interrupt #define USB_INTEP_HOST_IN_11 0x08000000 // Endpoint 11 Host IN Interrupt #define USB_INTEP_HOST_IN_10 0x04000000 // Endpoint 10 Host IN Interrupt #define USB_INTEP_HOST_IN_9 0x02000000 // Endpoint 9 Host IN Interrupt #define USB_INTEP_HOST_IN_8 0x01000000 // Endpoint 8 Host IN Interrupt #define USB_INTEP_HOST_IN_7 0x00800000 // Endpoint 7 Host IN Interrupt #define USB_INTEP_HOST_IN_6 0x00400000 // Endpoint 6 Host IN Interrupt #define USB_INTEP_HOST_IN_5 0x00200000 // Endpoint 5 Host IN Interrupt #define USB_INTEP_HOST_IN_4 0x00100000 // Endpoint 4 Host IN Interrupt #define USB_INTEP_HOST_IN_3 0x00080000 // Endpoint 3 Host IN Interrupt #define USB_INTEP_HOST_IN_2 0x00040000 // Endpoint 2 Host IN Interrupt #define USB_INTEP_HOST_IN_1 0x00020000 // Endpoint 1 Host IN Interrupt #define USB_INTEP_DEV_OUT 0xFFFE0000 // Device OUT Interrupts #define USB_INTEP_DEV_OUT_15 0x80000000 // Endpoint 15 Device OUT Interrupt #define USB_INTEP_DEV_OUT_14 0x40000000 // Endpoint 14 Device OUT Interrupt #define USB_INTEP_DEV_OUT_13 0x20000000 // Endpoint 13 Device OUT Interrupt #define USB_INTEP_DEV_OUT_12 0x10000000 // Endpoint 12 Device OUT Interrupt #define USB_INTEP_DEV_OUT_11 0x08000000 // Endpoint 11 Device OUT Interrupt #define USB_INTEP_DEV_OUT_10 0x04000000 // Endpoint 10 Device OUT Interrupt #define USB_INTEP_DEV_OUT_9 0x02000000 // Endpoint 9 Device OUT Interrupt #define USB_INTEP_DEV_OUT_8 0x01000000 // Endpoint 8 Device OUT Interrupt #define USB_INTEP_DEV_OUT_7 0x00800000 // Endpoint 7 Device OUT Interrupt #define USB_INTEP_DEV_OUT_6 0x00400000 // Endpoint 6 Device OUT Interrupt #define USB_INTEP_DEV_OUT_5 0x00200000 // Endpoint 5 Device OUT Interrupt #define USB_INTEP_DEV_OUT_4 0x00100000 // Endpoint 4 Device OUT Interrupt #define USB_INTEP_DEV_OUT_3 0x00080000 // Endpoint 3 Device OUT Interrupt #define USB_INTEP_DEV_OUT_2 0x00040000 // Endpoint 2 Device OUT Interrupt #define USB_INTEP_DEV_OUT_1 0x00020000 // Endpoint 1 Device OUT Interrupt #define USB_INTEP_HOST_OUT 0x0000FFFE // Host OUT Interrupts #define USB_INTEP_HOST_OUT_15 0x00008000 // Endpoint 15 Host OUT Interrupt #define USB_INTEP_HOST_OUT_14 0x00004000 // Endpoint 14 Host OUT Interrupt #define USB_INTEP_HOST_OUT_13 0x00002000 // Endpoint 13 Host OUT Interrupt #define USB_INTEP_HOST_OUT_12 0x00001000 // Endpoint 12 Host OUT Interrupt #define USB_INTEP_HOST_OUT_11 0x00000800 // Endpoint 11 Host OUT Interrupt #define USB_INTEP_HOST_OUT_10 0x00000400 // Endpoint 10 Host OUT Interrupt #define USB_INTEP_HOST_OUT_9 0x00000200 // Endpoint 9 Host OUT Interrupt #define USB_INTEP_HOST_OUT_8 0x00000100 // Endpoint 8 Host OUT Interrupt #define USB_INTEP_HOST_OUT_7 0x00000080 // Endpoint 7 Host OUT Interrupt #define USB_INTEP_HOST_OUT_6 0x00000040 // Endpoint 6 Host OUT Interrupt #define USB_INTEP_HOST_OUT_5 0x00000020 // Endpoint 5 Host OUT Interrupt #define USB_INTEP_HOST_OUT_4 0x00000010 // Endpoint 4 Host OUT Interrupt #define USB_INTEP_HOST_OUT_3 0x00000008 // Endpoint 3 Host OUT Interrupt #define USB_INTEP_HOST_OUT_2 0x00000004 // Endpoint 2 Host OUT Interrupt #define USB_INTEP_HOST_OUT_1 0x00000002 // Endpoint 1 Host OUT Interrupt #define USB_INTEP_DEV_IN 0x0000FFFE // Device IN Interrupts #define USB_INTEP_DEV_IN_15 0x00008000 // Endpoint 15 Device IN Interrupt #define USB_INTEP_DEV_IN_14 0x00004000 // Endpoint 14 Device IN Interrupt #define USB_INTEP_DEV_IN_13 0x00002000 // Endpoint 13 Device IN Interrupt #define USB_INTEP_DEV_IN_12 0x00001000 // Endpoint 12 Device IN Interrupt #define USB_INTEP_DEV_IN_11 0x00000800 // Endpoint 11 Device IN Interrupt #define USB_INTEP_DEV_IN_10 0x00000400 // Endpoint 10 Device IN Interrupt #define USB_INTEP_DEV_IN_9 0x00000200 // Endpoint 9 Device IN Interrupt #define USB_INTEP_DEV_IN_8 0x00000100 // Endpoint 8 Device IN Interrupt #define USB_INTEP_DEV_IN_7 0x00000080 // Endpoint 7 Device IN Interrupt #define USB_INTEP_DEV_IN_6 0x00000040 // Endpoint 6 Device IN Interrupt #define USB_INTEP_DEV_IN_5 0x00000020 // Endpoint 5 Device IN Interrupt #define USB_INTEP_DEV_IN_4 0x00000010 // Endpoint 4 Device IN Interrupt #define USB_INTEP_DEV_IN_3 0x00000008 // Endpoint 3 Device IN Interrupt #define USB_INTEP_DEV_IN_2 0x00000004 // Endpoint 2 Device IN Interrupt #define USB_INTEP_DEV_IN_1 0x00000002 // Endpoint 1 Device IN Interrupt #define USB_INTEP_0 0x00000001 // Endpoint 0 Interrupt //***************************************************************************** // // The following are values that are returned from USBSpeedGet(). // //***************************************************************************** #define USB_UNDEF_SPEED 0x80000000 // Current speed is undefined #define USB_HIGH_SPEED 0x00000002 // Current speed is High Speed #define USB_FULL_SPEED 0x00000001 // Current speed is Full Speed #define USB_LOW_SPEED 0x00000000 // Current speed is Low Speed //***************************************************************************** // // The following are values that are returned from USBEndpointStatus(). The // USB_HOST_* values are used when the USB controller is in host mode and the // USB_DEV_* values are used when the USB controller is in device mode. // //***************************************************************************** #define USB_HOST_IN_STATUS 0x114F0000 // Mask of all host IN interrupts #define USB_HOST_IN_PID_ERROR 0x10000000 // Stall on this endpoint received #define USB_HOST_IN_NOT_COMP 0x01000000 // Device failed to respond #define USB_HOST_IN_STALL 0x00400000 // Stall on this endpoint received #define USB_HOST_IN_DATA_ERROR 0x00080000 // CRC or bit-stuff error // (ISOC Mode) #define USB_HOST_IN_NAK_TO 0x00080000 // NAK received for more than the // specified timeout period #define USB_HOST_IN_ERROR 0x00040000 // Failed to communicate with a // device #define USB_HOST_IN_FIFO_FULL 0x00020000 // RX FIFO full #define USB_HOST_IN_PKTRDY 0x00010000 // Data packet ready #define USB_HOST_OUT_STATUS 0x000000A7 // Mask of all host OUT interrupts #define USB_HOST_OUT_NAK_TO 0x00000080 // NAK received for more than the // specified timeout period #define USB_HOST_OUT_NOT_COMP 0x00000080 // No response from device // (ISOC mode) #define USB_HOST_OUT_STALL 0x00000020 // Stall on this endpoint received #define USB_HOST_OUT_ERROR 0x00000004 // Failed to communicate with a // device #define USB_HOST_OUT_FIFO_NE 0x00000002 // TX FIFO is not empty #define USB_HOST_OUT_PKTPEND 0x00000001 // Transmit still being transmitted #define USB_HOST_EP0_NAK_TO 0x00000080 // NAK received for more than the // specified timeout period #define USB_HOST_EP0_STATUS 0x00000040 // This was a status packet #define USB_HOST_EP0_ERROR 0x00000010 // Failed to communicate with a // device #define USB_HOST_EP0_RX_STALL 0x00000004 // Stall on this endpoint received #define USB_HOST_EP0_RXPKTRDY 0x00000001 // Receive data packet ready #define USB_DEV_RX_PID_ERROR 0x01000000 // PID error in isochronous // transfer #define USB_DEV_RX_SENT_STALL 0x00400000 // Stall was sent on this endpoint #define USB_DEV_RX_DATA_ERROR 0x00080000 // CRC error on the data #define USB_DEV_RX_OVERRUN 0x00040000 // OUT packet was not loaded due to // a full FIFO #define USB_DEV_RX_FIFO_FULL 0x00020000 // RX FIFO full #define USB_DEV_RX_PKT_RDY 0x00010000 // Data packet ready #define USB_DEV_TX_NOT_COMP 0x00000080 // Large packet split up, more data // to come #define USB_DEV_TX_SENT_STALL 0x00000020 // Stall was sent on this endpoint #define USB_DEV_TX_UNDERRUN 0x00000004 // IN received with no data ready #define USB_DEV_TX_FIFO_NE 0x00000002 // The TX FIFO is not empty #define USB_DEV_TX_TXPKTRDY 0x00000001 // Transmit still being transmitted #define USB_DEV_EP0_SETUP_END 0x00000010 // Control transaction ended before // Data End seen #define USB_DEV_EP0_SENT_STALL 0x00000004 // Stall was sent on this endpoint #define USB_DEV_EP0_IN_PKTPEND 0x00000002 // Transmit data packet pending #define USB_DEV_EP0_OUT_PKTRDY 0x00000001 // Receive data packet ready //***************************************************************************** // // The following are values that can be passed to USBHostEndpointConfig() and // USBDevEndpointConfigSet() as the ui32Flags parameter. // //***************************************************************************** #define USB_EP_AUTO_SET 0x00000001 // Auto set feature enabled #define USB_EP_AUTO_REQUEST 0x00000002 // Auto request feature enabled #define USB_EP_AUTO_CLEAR 0x00000004 // Auto clear feature enabled #define USB_EP_DMA_MODE_0 0x00000008 // Enable DMA access using mode 0 #define USB_EP_DMA_MODE_1 0x00000010 // Enable DMA access using mode 1 #define USB_EP_DIS_NYET 0x00000020 // Disable NYET response for // high-speed Bulk and Interrupt // endpoints in device mode. #define USB_EP_MODE_ISOC 0x00000000 // Isochronous endpoint #define USB_EP_MODE_BULK 0x00000100 // Bulk endpoint #define USB_EP_MODE_INT 0x00000200 // Interrupt endpoint #define USB_EP_MODE_CTRL 0x00000300 // Control endpoint #define USB_EP_MODE_MASK 0x00000300 // Mode Mask #define USB_EP_SPEED_LOW 0x00000000 // Low Speed #define USB_EP_SPEED_FULL 0x00001000 // Full Speed #define USB_EP_SPEED_HIGH 0x00004000 // High Speed #define USB_EP_HOST_IN 0x00000000 // Host IN endpoint #define USB_EP_HOST_OUT 0x00002000 // Host OUT endpoint #define USB_EP_DEV_IN 0x00002000 // Device IN endpoint #define USB_EP_DEV_OUT 0x00000000 // Device OUT endpoint //***************************************************************************** // // The following are values that can be passed to USBHostPwrConfig() as the // ui32Flags parameter. // //***************************************************************************** #define USB_HOST_PWRFLT_LOW 0x00000010 #define USB_HOST_PWRFLT_HIGH 0x00000030 #define USB_HOST_PWRFLT_EP_NONE 0x00000000 #define USB_HOST_PWRFLT_EP_TRI 0x00000140 #define USB_HOST_PWRFLT_EP_LOW 0x00000240 #define USB_HOST_PWRFLT_EP_HIGH 0x00000340 #define USB_HOST_PWREN_MAN_LOW 0x00000000 #define USB_HOST_PWREN_MAN_HIGH 0x00000001 #define USB_HOST_PWREN_AUTOLOW 0x00000002 #define USB_HOST_PWREN_AUTOHIGH 0x00000003 #define USB_HOST_PWREN_FILTER 0x00010000 //***************************************************************************** // // The following are the valid values that can be passed to the // USBHostLPMConfig() function in the ui32Config parameter. // //***************************************************************************** #define USB_HOST_LPM_RMTWAKE 0x00000100 #define USB_HOST_LPM_L1 0x00000001 //***************************************************************************** // // The following are the valid values that can be passed to the // USBDevLPMConfig() function in the ui32Config parameter. // //***************************************************************************** #define USB_DEV_LPM_NAK 0x00000010 #define USB_DEV_LPM_NONE 0x00000000 #define USB_DEV_LPM_EN 0x0000000c #define USB_DEV_LPM_EXTONLY 0x00000004 //***************************************************************************** // // The following are the valid values that are returned from the // USBLPMLinkStateGet() function. // //***************************************************************************** #define USB_DEV_LPM_LS_RMTWAKE 0x00000100 #define USB_DEV_LPM_LS_L1 0x00000001 //***************************************************************************** // // The following are the valid values that are passed to the USBLPMIntEnable() // or USBLPMIntDisable() functions or are returned from the USBLPMIntStatus() // function. // //***************************************************************************** #define USB_INTLPM_ERROR 0x00000020 #define USB_INTLPM_RESUME 0x00000010 #define USB_INTLPM_INCOMPLETE 0x00000008 #define USB_INTLPM_ACK 0x00000004 #define USB_INTLPM_NYET 0x00000002 #define USB_INTLPM_STALL 0x00000001 //***************************************************************************** // // The following are the valid values that are passed to the USBClockEnable() // functions. // //***************************************************************************** #define USB_CLOCK_INTERNAL 0x00000200 #define USB_CLOCK_EXTERNAL 0x00000300 //***************************************************************************** // // The configuration options used with the USBULPIConfig() API. // //***************************************************************************** #define USB_ULPI_EXTVBUS 0x00000001 #define USB_ULPI_EXTVBUS_IND 0x00000002 //***************************************************************************** // // The following are special values that can be passed to // USBHostEndpointConfig() as the ui32NAKPollInterval parameter. // //***************************************************************************** #define MAX_NAK_LIMIT 31 // Maximum NAK interval #define DISABLE_NAK_LIMIT 0 // No NAK timeouts //***************************************************************************** // // This value specifies the maximum size of transfers on endpoint 0 as 64 // bytes. This value is fixed in hardware as the FIFO size for endpoint 0. // //***************************************************************************** #define MAX_PACKET_SIZE_EP0 64 //***************************************************************************** // // These values are used to indicate which endpoint to access. // //***************************************************************************** #define USB_EP_0 0x00000000 // Endpoint 0 #define USB_EP_1 0x00000010 // Endpoint 1 #define USB_EP_2 0x00000020 // Endpoint 2 #define USB_EP_3 0x00000030 // Endpoint 3 #define USB_EP_4 0x00000040 // Endpoint 4 #define USB_EP_5 0x00000050 // Endpoint 5 #define USB_EP_6 0x00000060 // Endpoint 6 #define USB_EP_7 0x00000070 // Endpoint 7 #define NUM_USB_EP 8 // Number of supported endpoints //***************************************************************************** // // These macros allow conversion between 0-based endpoint indices and the // USB_EP_x values required when calling various USB APIs. // //***************************************************************************** #define IndexToUSBEP(x) ((x) << 4) #define USBEPToIndex(x) ((x) >> 4) //***************************************************************************** // // The following are values that can be passed to USBFIFOConfigSet() as the // ui32FIFOSize parameter. // //***************************************************************************** #define USB_FIFO_SZ_8 0x00000000 // 8 byte FIFO #define USB_FIFO_SZ_16 0x00000001 // 16 byte FIFO #define USB_FIFO_SZ_32 0x00000002 // 32 byte FIFO #define USB_FIFO_SZ_64 0x00000003 // 64 byte FIFO #define USB_FIFO_SZ_128 0x00000004 // 128 byte FIFO #define USB_FIFO_SZ_256 0x00000005 // 256 byte FIFO #define USB_FIFO_SZ_512 0x00000006 // 512 byte FIFO #define USB_FIFO_SZ_1024 0x00000007 // 1024 byte FIFO #define USB_FIFO_SZ_2048 0x00000008 // 2048 byte FIFO //***************************************************************************** // // This macro allow conversion from a FIFO size label as defined above to // a number of bytes // //***************************************************************************** #define USBFIFOSizeToBytes(x) (8 << (x)) //***************************************************************************** // // The following are values that can be passed to USBEndpointDataSend() as the // ui32TransType parameter. // //***************************************************************************** #define USB_TRANS_OUT 0x00000102 // Normal OUT transaction #define USB_TRANS_IN 0x00000102 // Normal IN transaction #define USB_TRANS_IN_LAST 0x0000010a // Final IN transaction (for // endpoint 0 in device mode) #define USB_TRANS_SETUP 0x0000110a // Setup transaction (for endpoint // 0) #define USB_TRANS_STATUS 0x00000142 // Status transaction (for endpoint // 0) //***************************************************************************** // // The following are values are returned by the USBModeGet function. // //***************************************************************************** #define USB_DUAL_MODE_HOST 0x00000001 // Dual mode controller is in Host // mode. #define USB_DUAL_MODE_DEVICE 0x00000081 // Dual mode controller is in // Device mode. #define USB_DUAL_MODE_NONE 0x00000080 // Dual mode controller mode is not // set. #define USB_OTG_MODE_ASIDE_HOST 0x0000001d // OTG controller on the A side of // the cable. #define USB_OTG_MODE_ASIDE_NPWR 0x00000001 // OTG controller on the A side of // the cable. #define USB_OTG_MODE_ASIDE_SESS 0x00000009 // OTG controller on the A side of // the cable Session Valid. #define USB_OTG_MODE_ASIDE_AVAL 0x00000011 // OTG controller on the A side of // the cable A valid. #define USB_OTG_MODE_ASIDE_DEV 0x00000019 // OTG controller on the A side of // the cable. #define USB_OTG_MODE_BSIDE_HOST 0x0000009d // OTG controller on the B side of // the cable. #define USB_OTG_MODE_BSIDE_DEV 0x00000099 // OTG controller on the B side of // the cable. #define USB_OTG_MODE_BSIDE_NPWR 0x00000081 // OTG controller on the B side of // the cable. #define USB_OTG_MODE_NONE 0x00000080 // OTG controller mode is not set. //***************************************************************************** // // The values for the USBDMAChannelIntEnable() and USBDMAChannelIntStatus() // APIs. // //***************************************************************************** #define USB_DMA_INT_CH8 0x00000080 #define USB_DMA_INT_CH7 0x00000040 #define USB_DMA_INT_CH6 0x00000020 #define USB_DMA_INT_CH5 0x00000010 #define USB_DMA_INT_CH4 0x00000008 #define USB_DMA_INT_CH3 0x00000004 #define USB_DMA_INT_CH2 0x00000002 #define USB_DMA_INT_CH1 0x00000001 //***************************************************************************** // // The values for the USBDMAChannelStatus() API. // //***************************************************************************** #define USB_DMA_STATUS_ERROR 0x00000100 //***************************************************************************** // // The valid return values for the USBControllerVersion() API. // //***************************************************************************** #define USB_CONTROLLER_VER_0 0x00000000 // This is for Blizzard class // devices. #define USB_CONTROLLER_VER_1 0x00000001 // This is for Snowflake class // devices. //***************************************************************************** // // The valid return values for the USBDMAModeSet() and USBDMAModeGet() APIs or // USBDMAChannelConfig(). // //***************************************************************************** #define USB_DMA_CFG_BURST_NONE 0x00000000 #define USB_DMA_CFG_BURST_4 0x00000200 #define USB_DMA_CFG_BURST_8 0x00000400 #define USB_DMA_CFG_BURST_16 0x00000600 #define USB_DMA_CFG_INT_EN 0x00000008 #define USB_DMA_CFG_MODE_0 0x00000000 #define USB_DMA_CFG_MODE_1 0x00000004 #define USB_DMA_CFG_DIR_RX 0x00000000 #define USB_DMA_CFG_DIR_TX 0x00000002 #define USB_DMA_CFG_EN 0x00000001 //***************************************************************************** // // The following are values that can be passed to USBModeConfig() as the // ui3Mode parameter. // //***************************************************************************** #define USB_MODE_HOST_VBUS 0x00000004 #define USB_MODE_HOST 0x00000002 #define USB_MODE_DEV_VBUS 0x00000005 #define USB_MODE_DEV 0x00000003 #define USB_MODE_OTG 0x00000000 //***************************************************************************** // // Prototypes for the APIs. // //***************************************************************************** extern uint32_t USBDevAddrGet(uint32_t ui32Base); extern void USBDevAddrSet(uint32_t ui32Base, uint32_t ui32Address); extern void USBDevConnect(uint32_t ui32Base); extern void USBDevDisconnect(uint32_t ui32Base); extern void USBDevEndpointConfigSet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32MaxPacketSize, uint32_t ui32Flags); extern void USBDevEndpointConfigGet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t *pui32MaxPacketSize, uint32_t *pui32Flags); extern void USBDevEndpointDataAck(uint32_t ui32Base, uint32_t ui32Endpoint, bool bIsLastPacket); extern void USBDevEndpointStall(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBDevEndpointStallClear(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBDevEndpointStatusClear(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern uint32_t USBEndpointDataAvail(uint32_t ui32Base, uint32_t ui32Endpoint); extern void USBEndpointDMAEnable(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBEndpointDMADisable(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBEndpointDMAConfigSet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Config); extern int32_t USBEndpointDataGet(uint32_t ui32Base, uint32_t ui32Endpoint, uint8_t *pui8Data, uint32_t *pui32Size); extern int32_t USBEndpointDataPut(uint32_t ui32Base, uint32_t ui32Endpoint, uint8_t *pui8Data, uint32_t ui32Size); extern int32_t USBEndpointDataSend(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32TransType); extern void USBEndpointDataToggleClear(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBEndpointPacketCountSet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Count); extern uint32_t USBEndpointStatus(uint32_t ui32Base, uint32_t ui32Endpoint); extern uint32_t USBFIFOAddrGet(uint32_t ui32Base, uint32_t ui32Endpoint); extern void USBFIFOConfigGet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t *pui32FIFOAddress, uint32_t *pui32FIFOSize, uint32_t ui32Flags); extern void USBFIFOConfigSet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32FIFOAddress, uint32_t ui32FIFOSize, uint32_t ui32Flags); extern void USBFIFOFlush(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern uint32_t USBFrameNumberGet(uint32_t ui32Base); extern uint32_t USBHostAddrGet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBHostAddrSet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Addr, uint32_t ui32Flags); extern void USBHostEndpointConfig(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32MaxPacketSize, uint32_t ui32NAKPollInterval, uint32_t ui32TargetEndpoint, uint32_t ui32Flags); extern void USBHostEndpointDataAck(uint32_t ui32Base, uint32_t ui32Endpoint); extern void USBHostEndpointDataToggle(uint32_t ui32Base, uint32_t ui32Endpoint, bool bDataToggle, uint32_t ui32Flags); extern void USBHostEndpointStatusClear(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern uint32_t USBHostHubAddrGet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBHostHubAddrSet(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Addr, uint32_t ui32Flags); extern void USBHostPwrDisable(uint32_t ui32Base); extern void USBHostPwrEnable(uint32_t ui32Base); extern void USBHostPwrConfig(uint32_t ui32Base, uint32_t ui32Flags); extern void USBHostPwrFaultDisable(uint32_t ui32Base); extern void USBHostPwrFaultEnable(uint32_t ui32Base); extern void USBHostRequestIN(uint32_t ui32Base, uint32_t ui32Endpoint); extern void USBHostRequestINClear(uint32_t ui32Base, uint32_t ui32Endpoint); extern void USBHostRequestStatus(uint32_t ui32Base); extern void USBHostReset(uint32_t ui32Base, bool bStart); extern void USBHostResume(uint32_t ui32Base, bool bStart); extern uint32_t USBHostSpeedGet(uint32_t ui32Base); extern void USBHostSuspend(uint32_t ui32Base); extern void USBIntDisableControl(uint32_t ui32Base, uint32_t ui32IntFlags); extern void USBIntEnableControl(uint32_t ui32Base, uint32_t ui32IntFlags); extern uint32_t USBIntStatusControl(uint32_t ui32Base); extern void USBIntDisableEndpoint(uint32_t ui32Base, uint32_t ui32IntFlags); extern void USBIntEnableEndpoint(uint32_t ui32Base, uint32_t ui32IntFlags); extern uint32_t USBIntStatusEndpoint(uint32_t ui32Base); extern void USBIntRegister(uint32_t ui32Base, void (*pfnHandler)(void)); extern void USBIntUnregister(uint32_t ui32Base); extern void USBOTGSessionRequest(uint32_t ui32Base, bool bStart); extern uint32_t USBModeGet(uint32_t ui32Base); extern void USBEndpointDMAChannel(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Channel); extern uint32_t USBControllerVersion(uint32_t ui32Base); extern uint32_t USBDMAChannelIntStatus(uint32_t ui32Base); extern void USBDMAChannelConfigSet(uint32_t ui32Base, uint32_t ui32Channel, uint32_t ui32Endpoint, uint32_t ui32Config); extern void USBDMAChannelAddressSet(uint32_t ui32Base, uint32_t ui32Channel, void *pvAddress); extern void *USBDMAChannelAddressGet(uint32_t ui32Base, uint32_t ui32Channel); extern void USBDMAChannelCountSet(uint32_t ui32Base, uint32_t ui32Count, uint32_t ui32Channel); extern uint32_t USBDMAChannelCountGet(uint32_t ui32Base, uint32_t ui32Channel); extern uint32_t USBDMANumChannels(uint32_t ui32Base); extern void USBDMAChannelAssign(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Channel, uint32_t ui32Flags); extern void USBDMAChannelIntEnable(uint32_t ui32Base, uint32_t ui32Channel); extern void USBDMAChannelIntDisable(uint32_t ui32Base, uint32_t ui32Channel); extern void USBDMAChannelEnable(uint32_t ui32Base, uint32_t ui32Channel); extern void USBDMAChannelDisable(uint32_t ui32Base, uint32_t ui32Channel); extern uint32_t USBDMAChannelStatus(uint32_t ui32Base, uint32_t ui32Channel); extern void USBDMAChannelStatusClear(uint32_t ui32Base, uint32_t ui32Channel, uint32_t ui32Status); extern void USBHostEndpointSpeed(uint32_t ui32Base, uint32_t ui32Endpoint, uint32_t ui32Flags); extern void USBHostEndpointPing(uint32_t ui32Base, uint32_t ui32Endpoint, bool bEnable); extern void USBHostLPMSend(uint32_t ui32Base, uint32_t ui32Address, uint32_t uiEndpoint); extern void USBHostLPMConfig(uint32_t ui32Base, uint32_t ui32ResumeTime, uint32_t ui32Config); extern bool USBLPMRemoteWakeEnabled(uint32_t ui32Base); extern void USBHostLPMResume(uint32_t ui32Base); extern void USBDevLPMRemoteWake(uint32_t ui32Base); extern void USBDevLPMConfig(uint32_t ui32Base, uint32_t ui32Config); extern void USBDevLPMEnable(uint32_t ui32Base); extern void USBDevLPMDisable(uint32_t ui32Base); extern uint32_t USBLPMLinkStateGet(uint32_t ui32Base); extern uint32_t USBLPMEndpointGet(uint32_t ui32Base); extern uint32_t USBLPMIntStatus(uint32_t ui32Base); extern void USBLPMIntDisable(uint32_t ui32Base, uint32_t ui32Ints); extern void USBLPMIntEnable(uint32_t ui32Base, uint32_t ui32Ints); extern void USBHighSpeed(uint32_t ui32Base, bool bEnable); extern uint32_t USBDevSpeedGet(uint32_t ui32Base); extern void USBClockEnable(uint32_t ui32Base, uint32_t ui32Div, uint32_t ui32Flags); extern void USBClockDisable(uint32_t ui32Base); extern void USBULPIConfig(uint32_t ui32Base, uint32_t ui32Config); extern void USBULPIEnable(uint32_t ui32Base); extern void USBULPIDisable(uint32_t ui32Base); extern uint8_t USBULPIRegRead(uint32_t ui32Base, uint8_t ui8Reg); extern void USBULPIRegWrite(uint32_t ui32Base, uint8_t ui8Reg, uint8_t ui8Data); extern void USBHostMode(uint32_t ui32Base); extern void USBDevMode(uint32_t ui32Base); extern void USBOTGMode(uint32_t ui32Base); extern void USBModeConfig(uint32_t ui32Base, uint32_t ui32Mode); extern void USBPHYPowerOff(uint32_t ui32Base); extern void USBPHYPowerOn(uint32_t ui32Base); extern uint32_t USBNumEndpointsGet(uint32_t ui32Base); //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __DRIVERLIB_USB_H__