/*!
    \file  gd32f4xx_dma.c
    \brief DMA driver
*/

/*
    Copyright (C) 2016 GigaDevice

    2016-08-15, V1.0.0, firmware for GD32F4xx		
*/

#include "gd32f4xx_dma.h"

/*  DMA register bit offset */
#define CHXCTL_PERIEN_OFFSET            ((uint32_t)25U)

/*!
    \brief      deinitialize DMA a channel registers
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel is deinitialized
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     none
*/
void dma_deinit(uint32_t dma_periph,dma_channel_enum channelx)
{
    /* disable DMA a channel */
    DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_CHEN;
    /* reset DMA channel registers */
    DMA_CHCTL(dma_periph,channelx) = DMA_CHCTL_RESET_VALUE;
    DMA_CHCNT(dma_periph,channelx) = DMA_CHCNT_RESET_VALUE;
    DMA_CHPADDR(dma_periph,channelx) = DMA_CHPADDR_RESET_VALUE;
    DMA_CHM0ADDR(dma_periph,channelx) = DMA_CHMADDR_RESET_VALUE;
    DMA_CHM1ADDR(dma_periph,channelx) = DMA_CHMADDR_RESET_VALUE;
    DMA_CHFCTL(dma_periph,channelx) = DMA_CHFCTL_RESET_VALUE;
    if(channelx < DMA_CH4){
        DMA_INTC0(dma_periph) |= DMA_FLAG_ADD(DMA_CHINTF_RESET_VALUE,channelx);
    }else{
        DMA_INTC1(dma_periph) |= DMA_FLAG_ADD(DMA_CHINTF_RESET_VALUE,channelx);
    }
}

/*!
    \brief      initialize DMA single data mode
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel is initialized
      \arg        DMA_CHx(x=0..7)
    \param[in]  init_struct: the data needed to initialize DMA single data mode
                  periph_addr: peripheral base address
                  periph_memory_width: DMA_PERIPH_WIDTH_8BIT,DMA_PERIPH_WIDTH_16BIT,DMA_PERIPH_WIDTH_32BIT
                  periph_inc: DMA_PERIPH_INCREASE_ENABLE,DMA_PERIPH_INCREASE_DISABLE,DMA_PERIPH_INCREASE_FIX 
                  memory0_addr: memory base address
                  memory_inc: DMA_MEMORY_INCREASE_ENABLE,DMA_MEMORY_INCREASE_DISABLE
                  direction: DMA_PERIPH_TO_MEMORY,DMA_MEMORY_TO_PERIPH,DMA_MEMORY_TO_MEMORY
                  number: the number of remaining data to be transferred by the DMA
                  priority: DMA_PRIORITY_LOW,DMA_PRIORITY_MEDIUM,DMA_PRIORITY_HIGH,DMA_PRIORITY_ULTRA_HIGH
                  circular_mode: DMA_CIRCULAR_MODE_ENABLE,DMA_CIRCULAR_MODE_DISABLE
    \param[out] none
    \retval     none
*/
void dma_single_data_mode_init(uint32_t dma_periph,dma_channel_enum channelx,dma_single_data_parameter_struct init_struct)
{
    uint32_t ctl;
    
    /* select single data mode */
    DMA_CHFCTL(dma_periph,channelx) &= ~DMA_CHXFCTL_MDMEN;
    
    /* configure peripheral base address */
    DMA_CHPADDR(dma_periph,channelx) = init_struct.periph_addr;
    
    /* configure memory base address */
    DMA_CHM0ADDR(dma_periph,channelx) = init_struct.memory0_addr;
    
    /* configure the number of remaining data to be transferred */
    DMA_CHCNT(dma_periph,channelx) = init_struct.number;
    
    /* configure peripheral and memory transfer width,channel priotity,transfer mode */
    ctl = DMA_CHCTL(dma_periph,channelx);
    ctl &= ~(DMA_CHXCTL_PWIDTH | DMA_CHXCTL_MWIDTH | DMA_CHXCTL_PRIO | DMA_CHXCTL_TM);
    ctl |= (init_struct.periph_memory_width | (init_struct.periph_memory_width << 2) | init_struct.priority | init_struct.direction);
    DMA_CHCTL(dma_periph,channelx) = ctl;

    /* configure peripheral increasing mode */
    if(DMA_PERIPH_INCREASE_ENABLE == init_struct.periph_inc){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_PNAGA;
    }else if(DMA_PERIPH_INCREASE_DISABLE == init_struct.periph_inc){
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_PNAGA;
    }else{
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_PAIF;
    }

    /* configure memory increasing mode */
    if(DMA_MEMORY_INCREASE_ENABLE == init_struct.memory_inc){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_MNAGA;
    }else{
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_MNAGA;
    }

    /* configure DMA circular mode */
    if(DMA_CIRCULAR_MODE_ENABLE == init_struct.circular_mode){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_CMEN;
    }else{
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_CMEN;
    }
}

/*!
    \brief      initialize DMA multi data mode
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel is initialized
      \arg        DMA_CHx(x=0..7)
    \param[in]  dma_multi_data_parameter_struct: the data needed to initialize DMA multi data mode
                  periph_addr: peripheral base address
                  periph_width: DMA_PERIPH_WIDTH_8BIT,DMA_PERIPH_WIDTH_16BIT,DMA_PERIPH_WIDTH_32BIT
                  periph_inc: DMA_PERIPH_INCREASE_ENABLE,DMA_PERIPH_INCREASE_DISABLE,DMA_PERIPH_INCREASE_FIX 
                  memory0_addr: memory0 base address
                  memory_width: DMA_MEMORY_WIDTH_8BIT,DMA_MEMORY_WIDTH_16BIT,DMA_MEMORY_WIDTH_32BIT
                  memory_inc: DMA_MEMORY_INCREASE_ENABLE,DMA_MEMORY_INCREASE_DISABLE
                  direction: DMA_PERIPH_TO_MEMORY,DMA_MEMORY_TO_PERIPH,DMA_MEMORY_TO_MEMORY
                  number: the number of remaining data to be transferred by the DMA
                  priority: DMA_PRIORITY_LOW,DMA_PRIORITY_MEDIUM,DMA_PRIORITY_HIGH,DMA_PRIORITY_ULTRA_HIGH
                  circular_mode: DMA_CIRCULAR_MODE_ENABLE,DMA_CIRCULAR_MODE_DISABLE
                  memory_burst_width: DMA_MEMORY_BURST_SINGLE,DMA_MEMORY_BURST_4_BEAT,DMA_MEMORY_BURST_8_BEAT,DMA_MEMORY_BURST_16_BEAT
                  periph_burst_width: DMA_PERIPH_BURST_SINGLE,DMA_PERIPH_BURST_4_BEAT,DMA_PERIPH_BURST_8_BEAT,DMA_PERIPH_BURST_16_BEAT
                  critical_value: DMA_FIFO_1_WORD,DMA_FIFO_2_WORD,DMA_FIFO_3_WORD,DMA_FIFO_4_WORD
    \param[out] none
    \retval     none
*/
void dma_multi_data_mode_init(uint32_t dma_periph,dma_channel_enum channelx,dma_multi_data_parameter_struct init_struct)
{
    uint32_t ctl;
    
    /* select multi data mode and configure FIFO critical value */
    DMA_CHFCTL(dma_periph,channelx) |= (DMA_CHXFCTL_MDMEN | init_struct.critical_value);
    
    /* configure peripheral base address */
    DMA_CHPADDR(dma_periph,channelx) = init_struct.periph_addr;
    
    /* configure memory base address */
    DMA_CHM0ADDR(dma_periph,channelx) = init_struct.memory0_addr;
    
    /* configure the number of remaining data to be transferred */
    DMA_CHCNT(dma_periph,channelx) = init_struct.number;
    
    /* configure peripheral and memory transfer width,channel priotity,transfer mode,peripheral and memory burst transfer width */
    ctl = DMA_CHCTL(dma_periph,channelx);
    ctl &= ~(DMA_CHXCTL_PWIDTH | DMA_CHXCTL_MWIDTH | DMA_CHXCTL_PRIO | DMA_CHXCTL_TM | DMA_CHXCTL_PBURST | DMA_CHXCTL_MBURST);
    ctl |= (init_struct.periph_width | (init_struct.memory_width ) | init_struct.priority | init_struct.direction | init_struct.memory_burst_width | init_struct.periph_burst_width);
    DMA_CHCTL(dma_periph,channelx) = ctl;

    /* configure peripheral increasing mode */
    if(DMA_PERIPH_INCREASE_ENABLE == init_struct.periph_inc){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_PNAGA;
    }else if(DMA_PERIPH_INCREASE_DISABLE == init_struct.periph_inc){
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_PNAGA;
    }else{
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_PAIF;
    }

    /* configure memory increasing mode */
    if(DMA_MEMORY_INCREASE_ENABLE == init_struct.memory_inc){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_MNAGA;
    }else{
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_MNAGA;
    }

    /* configure DMA circular mode */
    if(DMA_CIRCULAR_MODE_ENABLE == init_struct.circular_mode){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_CMEN;
    }else{
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_CMEN;
    }
}

/*!
    \brief      get DMA flag is set or not 
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to get flag
      \arg        DMA_CHx(x=0..7)
    \param[in]  flag: specify get which flag
      \arg        DMA_INTF_FEEIF: FIFO error and exception flag
      \arg        DMA_INTF_SDEIF: single data mode exception flag
      \arg        DMA_INTF_TAEIF: transfer access error flag
      \arg        DMA_INTF_HTFIF: half transfer finish flag
      \arg        DMA_INTF_FTFIF: full transger finish flag
    \param[out] none
    \retval     FlagStatus: SET or RESET
*/
FlagStatus dma_flag_get(uint32_t dma_periph,dma_channel_enum channelx,uint32_t flag)
{
    if(channelx < DMA_CH4){
        if(DMA_INTF0(dma_periph) & DMA_FLAG_ADD(flag,channelx)){
            return SET;
        }else{
            return RESET;
        }
    }else{
        channelx -= (dma_channel_enum)4;
        if(DMA_INTF1(dma_periph) & DMA_FLAG_ADD(flag,channelx)){
            return SET;
        }else{
            return RESET;
        }
    }
}

/*!
    \brief      clear DMA a channel flag
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to get flag
      \arg        DMA_CHx(x=0..7)
    \param[in]  flag: specify get which flag
      \arg        DMA_INTF_FEEIF: FIFO error and exception flag
      \arg        DMA_INTF_SDEIF: single data mode exception flag
      \arg        DMA_INTF_TAEIF: transfer access error flag
      \arg        DMA_INTF_HTFIF: half transfer finish flag
      \arg        DMA_INTF_FTFIF: full transger finish flag
    \param[out] none
    \retval     none
*/
void dma_flag_clear(uint32_t dma_periph,dma_channel_enum channelx,uint32_t flag)
{
    if(channelx < DMA_CH4){
        DMA_INTC0(dma_periph) |= DMA_FLAG_ADD(flag,channelx);
    }else{
        channelx -= (dma_channel_enum)4;
        DMA_INTC1(dma_periph) |= DMA_FLAG_ADD(flag,channelx);
    }
}

/*!
    \brief      get DMA interrupt flag is set or not 
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to get interrupt flag
      \arg        DMA_CHx(x=0..7)
    \param[in]  interrupt: specify get which flag
      \arg        DMA_INTF_FEEIF: FIFO error and exception flag
      \arg        DMA_INTF_SDEIF: single data mode exception flag
      \arg        DMA_INTF_TAEIF: transfer access error flag
      \arg        DMA_INTF_HTFIF: half transfer finish flag
      \arg        DMA_INTF_FTFIF: full transger finish flag
    \param[out] none
    \retval     FlagStatus: SET or RESET
*/
FlagStatus dma_interrupt_flag_get(uint32_t dma_periph,dma_channel_enum channelx,uint32_t interrupt)
{
    uint32_t interrupt_enable = 0U,interrupt_flag = 0U;
    dma_channel_enum channel_flag_offset = channelx;
    if(channelx < DMA_CH4){
        switch(interrupt){
        case DMA_INTF_FEEIF:
            interrupt_flag = DMA_INTF0(dma_periph) & DMA_FLAG_ADD(interrupt,channelx);
            interrupt_enable = DMA_CHFCTL(dma_periph,channelx) & DMA_CHXFCTL_FEEIE;
            break;
        case DMA_INTF_SDEIF:
            interrupt_flag = DMA_INTF0(dma_periph) & DMA_FLAG_ADD(interrupt,channelx);
            interrupt_enable = DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_SDEIE;
            break;
        case DMA_INTF_TAEIF:
            interrupt_flag = DMA_INTF0(dma_periph) & DMA_FLAG_ADD(interrupt,channelx);
            interrupt_enable = DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_TAEIE;
            break;
        case DMA_INTF_HTFIF:
            interrupt_flag = DMA_INTF0(dma_periph) & DMA_FLAG_ADD(interrupt,channelx);
            interrupt_enable = DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_HTFIE;
            break;
        case DMA_INTF_FTFIF:
            interrupt_flag = (DMA_INTF0(dma_periph) & DMA_FLAG_ADD(interrupt,channelx));
            interrupt_enable = (DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_FTFIE);
            break;
        default:
            break;
        }
    }else{
        channel_flag_offset -= (dma_channel_enum)4;
        switch(interrupt){
        case DMA_INTF_FEEIF:
            interrupt_flag = DMA_INTF1(dma_periph) & DMA_FLAG_ADD(interrupt,channel_flag_offset);
            interrupt_enable = DMA_CHFCTL(dma_periph,channelx) & DMA_CHXFCTL_FEEIE;
            break;
        case DMA_INTF_SDEIF:
            interrupt_flag = DMA_INTF1(dma_periph) & DMA_FLAG_ADD(interrupt,channel_flag_offset);
            interrupt_enable = DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_SDEIE;
            break;
        case DMA_INTF_TAEIF:
            interrupt_flag = DMA_INTF1(dma_periph) & DMA_FLAG_ADD(interrupt,channel_flag_offset);
            interrupt_enable = DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_TAEIE;
            break;
        case DMA_INTF_HTFIF:
            interrupt_flag = DMA_INTF1(dma_periph) & DMA_FLAG_ADD(interrupt,channel_flag_offset);
            interrupt_enable = DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_HTFIE;
            break;
        case DMA_INTF_FTFIF:
            interrupt_flag = DMA_INTF1(dma_periph) & DMA_FLAG_ADD(interrupt,channel_flag_offset);
            interrupt_enable = DMA_CHCTL(dma_periph,channelx) & DMA_CHXCTL_FTFIE;
            break;
        default:
            break;
        }
    }
    
    if(interrupt_flag && interrupt_enable){
        return SET;
    }else{
        return RESET;
    }
}

/*!
    \brief      clear DMA a channel interrupt flag
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to clear interrupt flag
      \arg        DMA_CHx(x=0..7)
    \param[in]  interrupt: specify get which flag
      \arg        DMA_INTC_FEEIFC: clear FIFO error and exception flag
      \arg        DMA_INTC_SDEIFC: clear single data mode exception flag
      \arg        DMA_INTC_TAEIFC: clear transfer access error flag
      \arg        DMA_INTC_HTFIFC: clear half transfer finish flag
      \arg        DMA_INTC_FTFIFC: clear full transger finish flag
    \param[out] none
    \retval     none
*/
void dma_interrupt_flag_clear(uint32_t dma_periph,dma_channel_enum channelx,uint32_t interrupt)
{
    if(channelx < DMA_CH4){
        DMA_INTC0(dma_periph) |= DMA_FLAG_ADD(interrupt,channelx);
    }else{
        channelx -= (dma_channel_enum)4;
        DMA_INTC1(dma_periph) |= DMA_FLAG_ADD(interrupt,channelx);
    }
}

/*!
    \brief      enable DMA interrupt
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  source: specify which interrupt to enbale
      \arg        DMA_CHXCTL_SDEIE: single data mode exception interrupt enable
      \arg        DMA_CHXCTL_TAEIE: tranfer access error interrupt enable
      \arg        DMA_CHXCTL_HTFIE: half transfer finish interrupt enable
      \arg        DMA_CHXCTL_FTFIE: full transfer finish interrupt enable
      \arg        DMA_CHXFCTL_FEEIE: FIFO exception interrupt enable
    \param[out] none
    \retval     none
*/
void dma_interrupt_enable(uint32_t dma_periph,dma_channel_enum channelx,uint32_t source)
{
    if(DMA_CHXFCTL_FEEIE != source){
        DMA_CHCTL(dma_periph,channelx) |= source;
    }else{
        DMA_CHFCTL(dma_periph,channelx) |= source;
    }
}

/*!
    \brief      disable DMA interrupt
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  source: specify which interrupt to disbale
      \arg        DMA_CHXCTL_SDEIE: single data mode exception interrupt enable
      \arg        DMA_CHXCTL_TAEIE: tranfer access error interrupt enable
      \arg        DMA_CHXCTL_HTFIE: half transfer finish interrupt enable
      \arg        DMA_CHXCTL_FTFIE: full transfer finish interrupt enable
      \arg        DMA_CHXFCTL_FEEIE: FIFO exception interrupt enable
    \param[out] none
    \retval     none
*/
void dma_interrupt_disable(uint32_t dma_periph,dma_channel_enum channelx,uint32_t source)
{
    if(DMA_CHXFCTL_FEEIE != source){
        DMA_CHCTL(dma_periph,channelx) &= ~source;
    }else{
        DMA_CHFCTL(dma_periph,channelx) &= ~source;
    }
}

/*!
    \brief      set DMA peripheral base address
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to set peripheral base address
      \arg        DMA_CHx(x=0..7)
    \param[in]  address: peripheral base address
    \param[out] none
    \retval     none
*/
void dma_periph_address_config(uint32_t dma_periph,dma_channel_enum channelx,uint32_t address)
{
    DMA_CHPADDR(dma_periph,channelx) = address;
}

/*!
    \brief      set DMA Memory0 base address
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to set Memory base address 
      \arg        DMA_CHx(x=0..7)
    \param[in]  memory_flag: DMA_MEMORY_x(x=0,1)
    \param[in]  address: Memory base address
    \param[out] none
    \retval     none
*/
void dma_memory_address_config(uint32_t dma_periph,dma_channel_enum channelx,uint8_t memory_flag,uint32_t address)
{
    if(memory_flag){
        DMA_CHM1ADDR(dma_periph,channelx) = address;
    }else{
        DMA_CHM0ADDR(dma_periph,channelx) = address;
    }
}

/*!
    \brief      set the number of remaining data to be transferred by the DMA
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to set number
      \arg        DMA_CHx(x=0..7)
    \param[in]  number: the number of remaining data to be transferred by the DMA
    \param[out] none
    \retval     none
*/
void dma_transfer_number_config(uint32_t dma_periph,dma_channel_enum channelx,uint32_t number)
{
    DMA_CHCNT(dma_periph,channelx) = number;
}

/*!
    \brief      get the number of remaining data to be transferred by the DMA
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel to set number 
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     uint32_t: the number of remaining data to be transferred by the DMA 
*/
uint32_t dma_transfer_number_get(uint32_t dma_periph,dma_channel_enum channelx)
{
    return (uint32_t)DMA_CHCNT(dma_periph,channelx);
}

/*!
    \brief      configure priority level of DMA channel
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel
      \arg        DMA_CHx(x=0..7)
    \param[in]  priority: priority Level of this channel
      \arg        DMA_PRIORITY_LOW: low priority
      \arg        DMA_PRIORITY_MEDIUM: medium priority
      \arg        DMA_PRIORITY_HIGH: high priority
      \arg        DMA_PRIORITY_ULTRA_HIGH: ultra high priority
    \param[out] none
    \retval     none 
*/
void dma_priority_config(uint32_t dma_periph,dma_channel_enum channelx,uint32_t priority)
{
    uint32_t ctl;
    /* acquire DMA_CHxCTL register */
    ctl = DMA_CHCTL(dma_periph,channelx);
    /* assign regiser */
    ctl &= ~DMA_CHXCTL_PRIO;
    ctl |= priority;
    DMA_CHCTL(dma_periph,channelx) = ctl;
}

/*!
    \brief      configure transfer burst beats of memory
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel
      \arg        DMA_CHx(x=0..7)
    \param[in]  mbeat: transfer burst beats
      \arg        DMA_MEMORY_BURST_SINGLE: memory transfer single burst
      \arg        DMA_MEMORY_BURST_4_BEAT: memory transfer 4-beat burst
      \arg        DMA_MEMORY_BURST_8_BEAT: memory transfer 8-beat burst
      \arg        DMA_MEMORY_BURST_16_BEAT: memory transfer 16-beat burst
    \param[out] none
    \retval     none
*/
void dma_memory_burst_beats_config (uint32_t dma_periph,dma_channel_enum channelx,uint32_t mbeat)
{
    uint32_t ctl;
    /* acquire DMA_CHxCTL register */
    ctl = DMA_CHCTL(dma_periph,channelx);
    /* assign regiser */
    ctl &= ~DMA_CHXCTL_MBURST;
    ctl |= mbeat;
    DMA_CHCTL(dma_periph,channelx) = ctl;
}

/*!
    \brief      configure transfer burst beats of peripheral
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel
      \arg        DMA_CHx(x=0..7)
    \param[in]  pbeat: transfer burst beats
      \arg        DMA_PERIPH_BURST_SINGLE: peripheral transfer single burst
      \arg        DMA_PERIPH_BURST_4_BEAT: peripheral transfer 4-beat burst
      \arg        DMA_PERIPH_BURST_8_BEAT: peripheral transfer 8-beat burst
      \arg        DMA_PERIPH_BURST_16_BEAT: peripheral transfer 16-beat burst
    \param[out] none
    \retval     none
*/
void dma_periph_burst_beats_config (uint32_t dma_periph,dma_channel_enum channelx,uint32_t pbeat)
{
    uint32_t ctl;
    /* acquire DMA_CHxCTL register */
    ctl = DMA_CHCTL(dma_periph,channelx);
    /* assign regiser */
    ctl &= ~DMA_CHXCTL_PBURST;
    ctl |= pbeat;
    DMA_CHCTL(dma_periph,channelx) = ctl;
}

/*!
    \brief      configure transfer data size of memory
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel
      \arg        DMA_CHx(x=0..7)
    \param[in]  msize: transfer data size of memory
      \arg        DMA_MEMORY_WIDTH_8BIT: transfer data size of memory is 8-bit
      \arg        DMA_MEMORY_WIDTH_16BIT: transfer data size of memory is 16-bit
      \arg        DMA_MEMORY_WIDTH_32BIT: transfer data size of memory is 32-bit
    \param[out] none
    \retval     none
*/
void dma_memory_width_config(uint32_t dma_periph,dma_channel_enum channelx,uint32_t msize)
{
    uint32_t ctl;
    /* acquire DMA_CHxCTL register */
    ctl = DMA_CHCTL(dma_periph,channelx);
    /* assign regiser */
    ctl &= ~DMA_CHXCTL_MWIDTH;
    ctl |= msize;
    DMA_CHCTL(dma_periph,channelx) = ctl;
}

/*!
    \brief      configure transfer data size of peripheral 
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  msize: transfer data size of peripheral
      \arg        DMA_PERIPHERAL_WIDTH_8BIT: transfer data size of peripheral is 8-bit
      \arg        DMA_PERIPHERAL_WIDTH_16BIT: transfer data size of peripheral is 16-bit
      \arg        DMA_PERIPHERAL_WIDTH_32BIT: transfer data size of peripheral is 32-bit
    \param[out] none
    \retval     none
*/
void dma_periph_width_config (uint32_t dma_periph,dma_channel_enum channelx,uint32_t psize)
{
    uint32_t ctl;
    /* acquire DMA_CHxCTL register */
    ctl = DMA_CHCTL(dma_periph,channelx);
    /* assign regiser */
    ctl &= ~DMA_CHXCTL_PWIDTH;
    ctl |= psize;
    DMA_CHCTL(dma_periph,channelx) = ctl;
}

/*!
    \brief      configure memory address generation generation_algorithm
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  generation_algorithm: the address generation algorithm
      \arg        DMA_MEMORY_INCREASE_ENABLE: next address of memory is increasing address mode
      \arg        DMA_MEMORY_INCREASE_DISABLE: next address of memory is fixed address mode
    \param[out] none
    \retval     none
*/
void dma_memory_address_generation_config(uint32_t dma_periph,dma_channel_enum channelx,uint8_t generation_algorithm)
{
    if(DMA_MEMORY_INCREASE_ENABLE == generation_algorithm){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_MNAGA;
    }else{
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_MNAGA;
    }
}

/*!
    \brief      configure peripheral address generation generation_algorithm
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  generation_algorithm: the address generation algorithm
      \arg        DMA_PERIPH_INCREASE_ENABLE: next address of peripheral is increasing address mode
      \arg        DMA_PERIPH_INCREASE_DISABLE: next address of peripheral is fixed address mode
      \arg        DMA_PERIPH_INCREASE_FIX: increasing steps of peripheral address is fixed
    \param[out] none
    \retval     none
*/
void dma_peripheral_address_generation_config(uint32_t dma_periph,dma_channel_enum channelx,uint8_t generation_algorithm)
{
    if(DMA_PERIPH_INCREASE_ENABLE == generation_algorithm){
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_PNAGA;
    }else if(DMA_PERIPH_INCREASE_DISABLE == generation_algorithm){
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_PNAGA;
    }else{
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_PNAGA;
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_PAIF;
    }
}

/*!
    \brief      enable DMA circulation mode
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     none 
*/
void dma_circulation_enable(uint32_t dma_periph,dma_channel_enum channelx)
{
    DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_CMEN;
}

/*!
    \brief      disable DMA circulation mode
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     none 
*/
void dma_circulation_disable(uint32_t dma_periph,dma_channel_enum channelx)
{
    DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_CMEN;
}

/*!
    \brief      configure the direction of  data transfer on the channel
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  direction: specify the direction of  data transfer
      \arg        DMA_PERIPH_TO_MEMORY: read from peripheral and write to memory
      \arg        DMA_MEMORY_TO_PERIPH: read from memory and write to peripheral
      \arg        DMA_MEMORY_TO_MEMORY: read from memory and write to memory
    \param[out] none
    \retval     none
*/
void dma_transfer_direction_config(uint32_t dma_periph,dma_channel_enum channelx,uint8_t direction)
{
    uint32_t ctl;
    /* acquire DMA_CHxCTL register */
    ctl = DMA_CHCTL(dma_periph,channelx);
    /* assign regiser */
    ctl &= ~DMA_CHXCTL_TM;
    ctl |= direction;
    
    DMA_CHCTL(dma_periph,channelx) = ctl;
}

/*!
    \brief      enable DMA channel
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     none 
*/
void dma_channel_enable(uint32_t dma_periph,dma_channel_enum channelx)
{
    DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_CHEN;
}

/*!
    \brief      disable DMA channel
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     none 
*/
void dma_channel_disable(uint32_t dma_periph,dma_channel_enum channelx)
{
    DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_CHEN;
}

/*!
    \brief      DMA channel peripheral select
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  sub_periph: specify DMA channel peripheral
      \arg        DMA_SUBPERIx(x=0..7)
    \param[out] none
    \retval     none 
*/
void dma_channel_subperipheral_select(uint32_t dma_periph,dma_channel_enum channelx,dma_subperipheral_enum sub_periph)
{
    uint32_t ctl;
    /* acquire DMA_CHxCTL register */
    ctl = DMA_CHCTL(dma_periph,channelx);
    /* assign regiser */
    ctl &= ~DMA_CHXCTL_PERIEN;
    ctl |= ((uint32_t)sub_periph << CHXCTL_PERIEN_OFFSET);
    
    DMA_CHCTL(dma_periph,channelx) = ctl;
}

/*!
    \brief      DMA switch buffer mode config
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  memory1_addr: memory1 base address
    \param[in]  memory_select: DMA_MEMORY_0 or DMA_MEMORY_1
    \param[out] none
    \retval     none 
*/
void dma_switch_buffer_mode_config(uint32_t dma_periph,dma_channel_enum channelx,uint32_t memory1_addr,uint32_t memory_select)
{
    /* configure memory1 base address */
    DMA_CHM1ADDR(dma_periph,channelx) = memory1_addr;

    if(DMA_MEMORY_0 == memory_select){
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_MBS;
    }else{
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_MBS;
    }
}

/*!
    \brief      DMA switch buffer mode enable
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  newvalue: ENABLE or DISABLE
    \param[out] none
    \retval     none 
*/
void dma_switch_buffer_mode_enable(uint32_t dma_periph,dma_channel_enum channelx,ControlStatus newvalue)
{
    if(ENABLE == newvalue){
        /* switch buffer mode enable */
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_SBMEN;
    }else{
        /* switch buffer mode disable */
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_SBMEN;
    }
}

/*!
    \brief      DMA using memory get
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     the using memory 
*/
uint32_t dma_using_memory_get(uint32_t dma_periph,dma_channel_enum channelx)
{
    if((DMA_CHCTL(dma_periph,channelx)) & DMA_CHXCTL_MBS){
        return DMA_MEMORY_1;
    }else{
        return DMA_MEMORY_0;
    }
}

/*!
    \brief      DMA flow controller configure
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[in]  controller: specify DMA flow controler 
      \arg        DMA_FLOW_CONTROLLER_DMA: DMA is the flow controller
      \arg        DMA_FLOW_CONTROLLER_PERI: peripheral is the flow controller
    \param[out] none
    \retval     none
*/
void dma_flow_controller_config(uint32_t dma_periph,dma_channel_enum channelx,uint32_t controller)
{
    if(DMA_FLOW_CONTROLLER_DMA == controller){
        DMA_CHCTL(dma_periph,channelx) &= ~DMA_CHXCTL_TFCS;
    }else{
        DMA_CHCTL(dma_periph,channelx) |= DMA_CHXCTL_TFCS;
    }
}

/*!
    \brief      DMA FIFO status get
    \param[in]  dma_periph: DMAx(x=0,1)
      \arg        DMAx(x=0,1)
    \param[in]  channelx: specify which DMA channel 
      \arg        DMA_CHx(x=0..7)
    \param[out] none
    \retval     the using memory 
*/
uint32_t dma_fifo_status_get(uint32_t dma_periph,dma_channel_enum channelx)
{
    return (DMA_CHFCTL(dma_periph,channelx) & DMA_CHXFCTL_FCNT);
}