/* * Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc. * Copyright 2016 NXP * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __FSL_USB_DEVICE_H__ #define __FSL_USB_DEVICE_H__ /*! * @addtogroup usb_device_driver * @{ */ /******************************************************************************* * Definitions ******************************************************************************/ /*! @brief Defines Get/Set status Types */ typedef enum _usb_device_status { kUSB_DeviceStatusTestMode = 1U, /*!< Test mode */ kUSB_DeviceStatusSpeed, /*!< Current speed */ kUSB_DeviceStatusOtg, /*!< OTG status */ kUSB_DeviceStatusDevice, /*!< Device status */ kUSB_DeviceStatusEndpoint, /*!< Endpoint state usb_device_endpoint_status_t */ kUSB_DeviceStatusDeviceState, /*!< Device state */ kUSB_DeviceStatusAddress, /*!< Device address */ kUSB_DeviceStatusSynchFrame, /*!< Current frame */ kUSB_DeviceStatusBus, /*!< Bus status */ kUSB_DeviceStatusBusSuspend, /*!< Bus suspend */ kUSB_DeviceStatusBusSleep, /*!< Bus suspend */ kUSB_DeviceStatusBusResume, /*!< Bus resume */ kUSB_DeviceStatusRemoteWakeup, /*!< Remote wakeup state */ kUSB_DeviceStatusBusSleepResume, /*!< Bus resume */ } usb_device_status_t; /*! @brief Defines USB 2.0 device state */ typedef enum _usb_device_state { kUSB_DeviceStateConfigured = 0U, /*!< Device state, Configured*/ kUSB_DeviceStateAddress, /*!< Device state, Address*/ kUSB_DeviceStateDefault, /*!< Device state, Default*/ kUSB_DeviceStateAddressing, /*!< Device state, Address setting*/ kUSB_DeviceStateTestMode, /*!< Device state, Test mode*/ } usb_device_state_t; #if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) typedef enum _usb_dcd_detection_sequence_status { kUSB_DcdDetectionNotEnabled = 0x0U, kUSB_DcdDataPinDetectionCompleted = 0x01U, kUSB_DcdChargingPortDetectionCompleted = 0x02U, kUSB_DcdChargerTypeDetectionCompleted = 0x03U, } usb_dcd_detection_sequence_status_t; typedef enum _usb_dcd_detection_sequence_results { kUSB_DcdDetectionNoResults = 0x0U, kUSB_DcdDetectionStandardHost = 0x01U, kUSB_DcdDetectionChargingPort = 0x02U, kUSB_DcdDetectionDedicatedCharger = 0x03U, } usb_dcd_detection_sequence_results_t; #endif /*! @brief Defines endpoint state */ typedef enum _usb_endpoint_status { kUSB_DeviceEndpointStateIdle = 0U, /*!< Endpoint state, idle*/ kUSB_DeviceEndpointStateStalled, /*!< Endpoint state, stalled*/ } usb_device_endpoint_status_t; /*! @brief Control endpoint index */ #define USB_CONTROL_ENDPOINT (0U) /*! @brief Control endpoint maxPacketSize */ #define USB_CONTROL_MAX_PACKET_SIZE (64U) #if (USB_DEVICE_CONFIG_EHCI && (USB_CONTROL_MAX_PACKET_SIZE != (64U))) #error For high speed, USB_CONTROL_MAX_PACKET_SIZE must be 64!!! #endif /*! @brief The setup packet size of USB control transfer. */ #define USB_SETUP_PACKET_SIZE (8U) /*! @brief USB endpoint mask */ #define USB_ENDPOINT_NUMBER_MASK (0x0FU) /*! @brief Default invalid value or the endpoint callback length of cancelled transfer */ #define USB_UNINITIALIZED_VAL_32 (0xFFFFFFFFU) /*! @brief Available common EVENT types in device callback */ typedef enum _usb_device_event { kUSB_DeviceEventBusReset = 1U, /*!< USB bus reset signal detected */ kUSB_DeviceEventSuspend, /*!< USB bus suspend signal detected */ kUSB_DeviceEventResume, /*!< USB bus resume signal detected. The resume signal is driven by itself or a host */ kUSB_DeviceEventSleeped, /*!< USB bus LPM suspend signal detected */ kUSB_DeviceEventLPMResume, /*!< USB bus LPM resume signal detected. The resume signal is driven by itself or a host */ kUSB_DeviceEventError, /*!< An error is happened in the bus. */ kUSB_DeviceEventDetach, /*!< USB device is disconnected from a host. */ kUSB_DeviceEventAttach, /*!< USB device is connected to a host. */ kUSB_DeviceEventSetConfiguration, /*!< Set configuration. */ kUSB_DeviceEventSetInterface, /*!< Set interface. */ kUSB_DeviceEventGetDeviceDescriptor, /*!< Get device descriptor. */ kUSB_DeviceEventGetConfigurationDescriptor, /*!< Get configuration descriptor. */ kUSB_DeviceEventGetStringDescriptor, /*!< Get string descriptor. */ kUSB_DeviceEventGetHidDescriptor, /*!< Get HID descriptor. */ kUSB_DeviceEventGetHidReportDescriptor, /*!< Get HID report descriptor. */ kUSB_DeviceEventGetHidPhysicalDescriptor, /*!< Get HID physical descriptor. */ kUSB_DeviceEventGetBOSDescriptor, /*!< Get configuration descriptor. */ kUSB_DeviceEventGetDeviceQualifierDescriptor, /*!< Get device qualifier descriptor. */ kUSB_DeviceEventVendorRequest, /*!< Vendor request. */ kUSB_DeviceEventSetRemoteWakeup, /*!< Enable or disable remote wakeup function. */ kUSB_DeviceEventGetConfiguration, /*!< Get current configuration index */ kUSB_DeviceEventGetInterface, /*!< Get current interface alternate setting value */ kUSB_DeviceEventSetBHNPEnable, #if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) kUSB_DeviceEventDcdTimeOut, /*!< Dcd detect result is timeout */ kUSB_DeviceEventDcdUnknownType, /*!< Dcd detect result is unknown type */ kUSB_DeviceEventSDPDetected, /*!< The SDP facility is detected */ kUSB_DeviceEventChargingPortDetected, /*!< The charging port is detected */ kUSB_DeviceEventChargingHostDetected, /*!< The CDP facility is detected */ kUSB_DeviceEventDedicatedChargerDetected, /*!< The DCP facility is detected */ #endif } usb_device_event_t; /*! @brief Endpoint callback message structure */ typedef struct _usb_device_endpoint_callback_message_struct { uint8_t *buffer; /*!< Transferred buffer */ uint32_t length; /*!< Transferred data length */ uint8_t isSetup; /*!< Is in a setup phase */ } usb_device_endpoint_callback_message_struct_t; /*! * @brief Endpoint callback function typedef. * * This callback function is used to notify the upper layer what the transfer result is. * This callback pointer is passed when a specified endpoint is initialized by calling API #USB_DeviceInitEndpoint. * * @param handle The device handle. It equals to the value returned from #USB_DeviceInit. * @param message The result of a transfer, which includes transfer buffer, transfer length, and whether is in a * setup phase. * phase for control pipe. * @param callbackParam The parameter for this callback. It is same with * usb_device_endpoint_callback_struct_t::callbackParam. * * @return A USB error code or kStatus_USB_Success. */ typedef usb_status_t (*usb_device_endpoint_callback_t)(usb_device_handle handle, usb_device_endpoint_callback_message_struct_t *message, void *callbackParam); /*! * @brief Device callback function typedef. * * This callback function is used to notify the upper layer that the device status has changed. * This callback pointer is passed by calling API #USB_DeviceInit. * * @param handle The device handle. It equals the value returned from #USB_DeviceInit. * @param callbackEvent The callback event type. See enumeration #usb_device_event_t. * @param eventParam The event parameter for this callback. The parameter type is determined by the callback event. * * @return A USB error code or kStatus_USB_Success. */ typedef usb_status_t (*usb_device_callback_t)(usb_device_handle handle, uint32_t callbackEvent, void *eventParam); /*! @brief Endpoint callback structure */ typedef struct _usb_device_endpoint_callback_struct { usb_device_endpoint_callback_t callbackFn; /*!< Endpoint callback function*/ void *callbackParam; /*!< Parameter for callback function*/ uint8_t isBusy; } usb_device_endpoint_callback_struct_t; /*! @brief Endpoint initialization structure */ typedef struct _usb_device_endpoint_init_struct { uint16_t maxPacketSize; /*!< Endpoint maximum packet size */ uint8_t endpointAddress; /*!< Endpoint address*/ uint8_t transferType; /*!< Endpoint transfer type*/ uint8_t zlt; /*!< ZLT flag*/ } usb_device_endpoint_init_struct_t; /*! @brief Endpoint status structure */ typedef struct _usb_device_endpoint_status_struct { uint8_t endpointAddress; /*!< Endpoint address */ uint16_t endpointStatus; /*!< Endpoint status : idle or stalled */ } usb_device_endpoint_status_struct_t; #if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) /*! @brief USB DCD charge timing specification structure */ typedef struct _usb_device_dcd_charging_time { uint16_t dcdSeqInitTime; /*!< The dcd sequence init time */ uint16_t dcdDbncTime; /*!< The debounce time period on DP signal */ uint16_t dcdDpSrcOnTime; /*!< The time period comparator enabled */ uint16_t dcdTimeWaitAfterPrD; /*!< The time period between primary and secondary detection */ uint8_t dcdTimeDMSrcOn; /*!< The amount of time that the modules enable the Vdm_src */ } usb_device_dcd_charging_time_t; #endif #if defined(__cplusplus) extern "C" { #endif /* __cplusplus*/ /*! * @name USB device APIs * @{ */ /******************************************************************************* * API ******************************************************************************/ /*! * @brief Initializes the USB device stack. * * This function initializes the USB device module specified by the controllerId. * * @param[in] controllerId The controller ID of the USB IP. See the enumeration #usb_controller_index_t. * @param[in] deviceCallback Function pointer of the device callback. * @param[out] handle It is an out parameter used to return the pointer of the device handle to the caller. * * @retval kStatus_USB_Success The device is initialized successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. * @retval kStatus_USB_Busy Cannot allocate a device handle. * @retval kStatus_USB_ControllerNotFound Cannot find the controller according to the controller id. * @retval kStatus_USB_InvalidControllerInterface The controller driver interfaces is invalid. There is an empty * interface entity. * @retval kStatus_USB_Error The macro USB_DEVICE_CONFIG_ENDPOINTS is more than the IP's endpoint number. * Or, the device has been initialized. * Or, the mutex or message queue is created failed. */ extern usb_status_t USB_DeviceInit(uint8_t controllerId, usb_device_callback_t deviceCallback, usb_device_handle *handle); /*! * @brief Enables the device functionality. * * The function enables the device functionality, so that the device can be recognized by the host when the device * detects that it has been connected to a host. * * @param[in] handle The device handle got from #USB_DeviceInit. * * @retval kStatus_USB_Success The device is run successfully. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer. Or the controller handle is invalid. * */ extern usb_status_t USB_DeviceRun(usb_device_handle handle); /*! * @brief Disables the device functionality. * * The function disables the device functionality. After this function called, even if the device is detached to the * host, * it can't work. * * @param[in] handle The device handle received from #USB_DeviceInit. * * @retval kStatus_USB_Success The device is stopped successfully. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid. */ extern usb_status_t USB_DeviceStop(usb_device_handle handle); /*! * @brief De-initializes the device controller. * * The function de-initializes the device controller specified by the handle. * * @param[in] handle The device handle got from #USB_DeviceInit. * * @retval kStatus_USB_Success The device is stopped successfully. * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid. */ extern usb_status_t USB_DeviceDeinit(usb_device_handle handle); /*! * @brief Sends data through a specified endpoint. * * The function is used to send data through a specified endpoint. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] endpointAddress Endpoint index. * @param[in] buffer The memory address to hold the data need to be sent. The function is not reentrant. * @param[in] length The data length need to be sent. * * @retval kStatus_USB_Success The send request is sent successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_Busy Cannot allocate DTDS for current transfer in EHCI driver. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. * @retval kStatus_USB_Error The device is doing reset. * * @note The return value indicates whether the sending request is successful or not. The transfer done is notified by * the * corresponding callback function. * Currently, only one transfer request can be supported for one specific endpoint. * If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application * should implement a queue on the application level. * The subsequent transfer can begin only when the previous transfer is done (get notification through the endpoint * callback). */ extern usb_status_t USB_DeviceSendRequest(usb_device_handle handle, uint8_t endpointAddress, uint8_t *buffer, uint32_t length); /*! * @brief Receives data through a specified endpoint. * * The function is used to receive data through a specified endpoint. The function is not reentrant. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] endpointAddress Endpoint index. * @param[in] buffer The memory address to save the received data. * @param[in] length The data length want to be received. * * @retval kStatus_USB_Success The receive request is sent successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_Busy Cannot allocate DTDS for current transfer in EHCI driver. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. * @retval kStatus_USB_Error The device is doing reset. * * @note The return value indicates whether the receiving request is successful or not. The transfer done is notified by * the * corresponding callback function. * Currently, only one transfer request can be supported for one specific endpoint. * If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application * should implement a queue on the application level. * The subsequent transfer can begin only when the previous transfer is done (get notification through the endpoint * callback). */ extern usb_status_t USB_DeviceRecvRequest(usb_device_handle handle, uint8_t endpointAddress, uint8_t *buffer, uint32_t length); /*! * @brief Cancels the pending transfer in a specified endpoint. * * The function is used to cancel the pending transfer in a specified endpoint. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. * * @retval kStatus_USB_Success The transfer is cancelled. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer or the controller handle is invalid. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. */ extern usb_status_t USB_DeviceCancel(usb_device_handle handle, uint8_t endpointAddress); /*! * @brief Initializes a specified endpoint. * * The function is used to initialize a specified endpoint. The corresponding endpoint callback is also initialized. * * @param[in] handle The device handle received from #USB_DeviceInit. * @param[in] epInit Endpoint initialization structure. See the structure usb_device_endpoint_init_struct_t. * @param[in] epCallback Endpoint callback structure. See the structure * usb_device_endpoint_callback_struct_t. * * @retval kStatus_USB_Success The endpoint is initialized successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_InvalidParameter The epInit or epCallback is NULL pointer. Or the endpoint number is * more than USB_DEVICE_CONFIG_ENDPOINTS. * @retval kStatus_USB_Busy The endpoint is busy in EHCI driver. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. */ extern usb_status_t USB_DeviceInitEndpoint(usb_device_handle handle, usb_device_endpoint_init_struct_t *epInit, usb_device_endpoint_callback_struct_t *epCallback); /*! * @brief Deinitializes a specified endpoint. * * The function is used to deinitializes a specified endpoint. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. * * @retval kStatus_USB_Success The endpoint is de-initialized successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS. * @retval kStatus_USB_Busy The endpoint is busy in EHCI driver. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. */ extern usb_status_t USB_DeviceDeinitEndpoint(usb_device_handle handle, uint8_t endpointAddress); /*! * @brief Stalls a specified endpoint. * * The function is used to stall a specified endpoint. * * @param[in] handle The device handle received from #USB_DeviceInit. * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. * * @retval kStatus_USB_Success The endpoint is stalled successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. */ extern usb_status_t USB_DeviceStallEndpoint(usb_device_handle handle, uint8_t endpointAddress); /*! * @brief Unstalls a specified endpoint. * * The function is used to unstall a specified endpoint. * * @param[in] handle The device handle received from #USB_DeviceInit. * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. * * @retval kStatus_USB_Success The endpoint is unstalled successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. */ extern usb_status_t USB_DeviceUnstallEndpoint(usb_device_handle handle, uint8_t endpointAddress); /*! * @brief Gets the status of the selected item. * * The function is used to get the status of the selected item. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] type The selected item. See the structure #usb_device_status_t. * @param[out] param The parameter type is determined by the selected item. * * @retval kStatus_USB_Success Get status successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_InvalidParameter The parameter is NULL pointer. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. * @retval kStatus_USB_Error Unsupported type. */ extern usb_status_t USB_DeviceGetStatus(usb_device_handle handle, usb_device_status_t type, void *param); /*! * @brief Sets the status of the selected item. * * The function is used to set the status of the selected item. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] type The selected item. See the structure #usb_device_status_t. * @param[in] param The parameter type is determined by the selected item. * * @retval kStatus_USB_Success Set status successfully. * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. * @retval kStatus_USB_Error Unsupported type or the parameter is NULL pointer. */ extern usb_status_t USB_DeviceSetStatus(usb_device_handle handle, usb_device_status_t type, void *param); #if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) /*! * @brief Initializes the device dcd module. * * The function initializes the device dcd module. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] time_param The time parameter used to config the dcd timing registers. * * @retval kStatus_USB_Success The device is run successfully. * @retval kStatus_USB_ControllerNotFound Cannot find the controller. * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer. Or the controller handle is invalid. * */ extern usb_status_t USB_DeviceDcdInitModule(usb_device_handle handle, void *time_param); /*! * @brief De-initializes the device dcd module. * * The function de-initializes the device dcd module specified by the handle. * * @param[in] handle The device handle got from #USB_DeviceInit. * * @retval kStatus_USB_Success The device is stopped successfully. * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid. */ extern usb_status_t USB_DeviceDcdDeinitModule(usb_device_handle handle); #endif /*! * @brief Device task function. * * The function is used to handle the controller message. * This function should not be called in the application directly. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ extern void USB_DeviceTaskFunction(void *deviceHandle); #if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U)) /*! * @brief Device KHCI task function. * * The function is used to handle the KHCI controller message. * In the bare metal environment, this function should be called periodically in the main function. * In the RTOS environment, this function should be used as a function entry to create a task. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ #define USB_DeviceKhciTaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle) #endif #if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U)) /*! * @brief Device EHCI task function. * * The function is used to handle the EHCI controller message. * In the bare metal environment, this function should be called periodically in the main function. * In the RTOS environment, this function should be used as a function entry to create a task. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ #define USB_DeviceEhciTaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle) #if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) /*! * @brief Device EHCI DCD ISR function. * * The function is the EHCI DCD interrupt service routine. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ extern void USB_DeviceDcdHSIsrFunction(void *deviceHandle); #endif #endif #if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \ ((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U))) /*! * @brief Device LPC ip3511 controller task function. * * The function is used to handle the LPC ip3511 controller message. * In the bare metal environment, this function should be called periodically in the main function. * In the RTOS environment, this function should be used as a function entry to create a task. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ #define USB_DeviceLpcIp3511TaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle) #endif #if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U)) /*! * @brief Device KHCI ISR function. * * The function is the KHCI interrupt service routine. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ extern void USB_DeviceKhciIsrFunction(void *deviceHandle); #if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) /*! * @brief Device KHCI DCD ISR function. * * The function is the KHCI DCD interrupt service routine. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ extern void USB_DeviceDcdIsrFunction(void *deviceHandle); #endif #endif #if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U)) /*! * @brief Device EHCI ISR function. * * The function is the EHCI interrupt service routine. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ extern void USB_DeviceEhciIsrFunction(void *deviceHandle); #endif #if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \ ((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U))) /*! * @brief Device LPC USB ISR function. * * The function is the LPC USB interrupt service routine. * * @param[in] deviceHandle The device handle got from #USB_DeviceInit. */ extern void USB_DeviceLpcIp3511IsrFunction(void *deviceHandle); #endif /*! * @brief Gets the device stack version function. * * The function is used to get the device stack version. * * @param[out] version The version structure pointer to keep the device stack version. * */ extern void USB_DeviceGetVersion(uint32_t *version); #if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U)) /*! * @brief Update the hardware tick. * * The function is used to update the hardware tick. * * @param[in] handle The device handle got from #USB_DeviceInit. * @param[in] tick Current hardware tick(uint is ms). * */ extern usb_status_t USB_DeviceUpdateHwTick(usb_device_handle handle, uint64_t tick); #endif /*! @}*/ #if defined(__cplusplus) } #endif /* __cplusplus*/ /*! @}*/ #endif /* __USB_DEVICE_H__ */