//***************************************************************************** // // hw_nvic.h - Macros used when accessing the NVIC hardware. // // Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 6459 of the Stellaris Firmware Development Package. // //***************************************************************************** #ifndef __HW_NVIC_H__ #define __HW_NVIC_H__ //***************************************************************************** // // The following are defines for the NVIC register addresses. // //***************************************************************************** #define NVIC_INT_TYPE 0xE000E004 // Interrupt Controller Type Reg #define NVIC_ST_CTRL 0xE000E010 // SysTick Control and Status Reg #define NVIC_ST_RELOAD 0xE000E014 // SysTick Reload Value Register #define NVIC_ST_CURRENT 0xE000E018 // SysTick Current Value Register #define NVIC_ST_CAL 0xE000E01C // SysTick Calibration Value Reg #define NVIC_EN0 0xE000E100 // IRQ 0 to 31 Set Enable Register #define NVIC_EN1 0xE000E104 // IRQ 32 to 63 Set Enable Register #define NVIC_DIS0 0xE000E180 // IRQ 0 to 31 Clear Enable Reg #define NVIC_DIS1 0xE000E184 // IRQ 32 to 63 Clear Enable Reg #define NVIC_PEND0 0xE000E200 // IRQ 0 to 31 Set Pending Register #define NVIC_PEND1 0xE000E204 // IRQ 32 to 63 Set Pending Reg #define NVIC_UNPEND0 0xE000E280 // IRQ 0 to 31 Clear Pending Reg #define NVIC_UNPEND1 0xE000E284 // IRQ 32 to 63 Clear Pending Reg #define NVIC_ACTIVE0 0xE000E300 // IRQ 0 to 31 Active Register #define NVIC_ACTIVE1 0xE000E304 // IRQ 32 to 63 Active Register #define NVIC_PRI0 0xE000E400 // IRQ 0 to 3 Priority Register #define NVIC_PRI1 0xE000E404 // IRQ 4 to 7 Priority Register #define NVIC_PRI2 0xE000E408 // IRQ 8 to 11 Priority Register #define NVIC_PRI3 0xE000E40C // IRQ 12 to 15 Priority Register #define NVIC_PRI4 0xE000E410 // IRQ 16 to 19 Priority Register #define NVIC_PRI5 0xE000E414 // IRQ 20 to 23 Priority Register #define NVIC_PRI6 0xE000E418 // IRQ 24 to 27 Priority Register #define NVIC_PRI7 0xE000E41C // IRQ 28 to 31 Priority Register #define NVIC_PRI8 0xE000E420 // IRQ 32 to 35 Priority Register #define NVIC_PRI9 0xE000E424 // IRQ 36 to 39 Priority Register #define NVIC_PRI10 0xE000E428 // IRQ 40 to 43 Priority Register #define NVIC_PRI11 0xE000E42C // IRQ 44 to 47 Priority Register #define NVIC_PRI12 0xE000E430 // IRQ 48 to 51 Priority Register #define NVIC_PRI13 0xE000E434 // IRQ 52 to 55 Priority Register #define NVIC_CPUID 0xE000ED00 // CPUID Base Register #define NVIC_INT_CTRL 0xE000ED04 // Interrupt Control State Register #define NVIC_VTABLE 0xE000ED08 // Vector Table Offset Register #define NVIC_APINT 0xE000ED0C // App. Int & Reset Control Reg #define NVIC_SYS_CTRL 0xE000ED10 // System Control Register #define NVIC_CFG_CTRL 0xE000ED14 // Configuration Control Register #define NVIC_SYS_PRI1 0xE000ED18 // Sys. Handlers 4 to 7 Priority #define NVIC_SYS_PRI2 0xE000ED1C // Sys. Handlers 8 to 11 Priority #define NVIC_SYS_PRI3 0xE000ED20 // Sys. Handlers 12 to 15 Priority #define NVIC_SYS_HND_CTRL 0xE000ED24 // System Handler Control and State #define NVIC_FAULT_STAT 0xE000ED28 // Configurable Fault Status Reg #define NVIC_HFAULT_STAT 0xE000ED2C // Hard Fault Status Register #define NVIC_DEBUG_STAT 0xE000ED30 // Debug Status Register #define NVIC_MM_ADDR 0xE000ED34 // Mem Manage Address Register #define NVIC_FAULT_ADDR 0xE000ED38 // Bus Fault Address Register #define NVIC_MPU_TYPE 0xE000ED90 // MPU Type Register #define NVIC_MPU_CTRL 0xE000ED94 // MPU Control Register #define NVIC_MPU_NUMBER 0xE000ED98 // MPU Region Number Register #define NVIC_MPU_BASE 0xE000ED9C // MPU Region Base Address Register #define NVIC_MPU_ATTR 0xE000EDA0 // MPU Region Attribute & Size Reg #define NVIC_DBG_CTRL 0xE000EDF0 // Debug Control and Status Reg #define NVIC_DBG_XFER 0xE000EDF4 // Debug Core Reg. Transfer Select #define NVIC_DBG_DATA 0xE000EDF8 // Debug Core Register Data #define NVIC_DBG_INT 0xE000EDFC // Debug Reset Interrupt Control #define NVIC_SW_TRIG 0xE000EF00 // Software Trigger Interrupt Reg //***************************************************************************** // // The following are defines for the bit fields in the NVIC_INT_TYPE register. // //***************************************************************************** #define NVIC_INT_TYPE_LINES_M 0x0000001F // Number of interrupt lines (x32) #define NVIC_INT_TYPE_LINES_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_ST_CTRL register. // //***************************************************************************** #define NVIC_ST_CTRL_COUNT 0x00010000 // Count flag #define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source #define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt enable #define NVIC_ST_CTRL_ENABLE 0x00000001 // Counter mode //***************************************************************************** // // The following are defines for the bit fields in the NVIC_ST_RELOAD register. // //***************************************************************************** #define NVIC_ST_RELOAD_M 0x00FFFFFF // Counter load value #define NVIC_ST_RELOAD_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_ST_CURRENT // register. // //***************************************************************************** #define NVIC_ST_CURRENT_M 0x00FFFFFF // Counter current value #define NVIC_ST_CURRENT_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_ST_CAL register. // //***************************************************************************** #define NVIC_ST_CAL_NOREF 0x80000000 // No reference clock #define NVIC_ST_CAL_SKEW 0x40000000 // Clock skew #define NVIC_ST_CAL_ONEMS_M 0x00FFFFFF // 1ms reference value #define NVIC_ST_CAL_ONEMS_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_EN0 register. // //***************************************************************************** #define NVIC_EN0_INT31 0x80000000 // Interrupt 31 enable #define NVIC_EN0_INT30 0x40000000 // Interrupt 30 enable #define NVIC_EN0_INT29 0x20000000 // Interrupt 29 enable #define NVIC_EN0_INT28 0x10000000 // Interrupt 28 enable #define NVIC_EN0_INT27 0x08000000 // Interrupt 27 enable #define NVIC_EN0_INT26 0x04000000 // Interrupt 26 enable #define NVIC_EN0_INT25 0x02000000 // Interrupt 25 enable #define NVIC_EN0_INT24 0x01000000 // Interrupt 24 enable #define NVIC_EN0_INT23 0x00800000 // Interrupt 23 enable #define NVIC_EN0_INT22 0x00400000 // Interrupt 22 enable #define NVIC_EN0_INT21 0x00200000 // Interrupt 21 enable #define NVIC_EN0_INT20 0x00100000 // Interrupt 20 enable #define NVIC_EN0_INT19 0x00080000 // Interrupt 19 enable #define NVIC_EN0_INT18 0x00040000 // Interrupt 18 enable #define NVIC_EN0_INT17 0x00020000 // Interrupt 17 enable #define NVIC_EN0_INT16 0x00010000 // Interrupt 16 enable #define NVIC_EN0_INT15 0x00008000 // Interrupt 15 enable #define NVIC_EN0_INT14 0x00004000 // Interrupt 14 enable #define NVIC_EN0_INT13 0x00002000 // Interrupt 13 enable #define NVIC_EN0_INT12 0x00001000 // Interrupt 12 enable #define NVIC_EN0_INT11 0x00000800 // Interrupt 11 enable #define NVIC_EN0_INT10 0x00000400 // Interrupt 10 enable #define NVIC_EN0_INT9 0x00000200 // Interrupt 9 enable #define NVIC_EN0_INT8 0x00000100 // Interrupt 8 enable #define NVIC_EN0_INT7 0x00000080 // Interrupt 7 enable #define NVIC_EN0_INT6 0x00000040 // Interrupt 6 enable #define NVIC_EN0_INT5 0x00000020 // Interrupt 5 enable #define NVIC_EN0_INT4 0x00000010 // Interrupt 4 enable #define NVIC_EN0_INT3 0x00000008 // Interrupt 3 enable #define NVIC_EN0_INT2 0x00000004 // Interrupt 2 enable #define NVIC_EN0_INT1 0x00000002 // Interrupt 1 enable #define NVIC_EN0_INT0 0x00000001 // Interrupt 0 enable //***************************************************************************** // // The following are defines for the bit fields in the NVIC_EN1 register. // //***************************************************************************** #define NVIC_EN1_INT59 0x08000000 // Interrupt 59 enable #define NVIC_EN1_INT58 0x04000000 // Interrupt 58 enable #define NVIC_EN1_INT57 0x02000000 // Interrupt 57 enable #define NVIC_EN1_INT56 0x01000000 // Interrupt 56 enable #define NVIC_EN1_INT55 0x00800000 // Interrupt 55 enable #define NVIC_EN1_INT54 0x00400000 // Interrupt 54 enable #define NVIC_EN1_INT53 0x00200000 // Interrupt 53 enable #define NVIC_EN1_INT52 0x00100000 // Interrupt 52 enable #define NVIC_EN1_INT51 0x00080000 // Interrupt 51 enable #define NVIC_EN1_INT50 0x00040000 // Interrupt 50 enable #define NVIC_EN1_INT49 0x00020000 // Interrupt 49 enable #define NVIC_EN1_INT48 0x00010000 // Interrupt 48 enable #define NVIC_EN1_INT47 0x00008000 // Interrupt 47 enable #define NVIC_EN1_INT46 0x00004000 // Interrupt 46 enable #define NVIC_EN1_INT45 0x00002000 // Interrupt 45 enable #define NVIC_EN1_INT44 0x00001000 // Interrupt 44 enable #define NVIC_EN1_INT43 0x00000800 // Interrupt 43 enable #define NVIC_EN1_INT42 0x00000400 // Interrupt 42 enable #define NVIC_EN1_INT41 0x00000200 // Interrupt 41 enable #define NVIC_EN1_INT40 0x00000100 // Interrupt 40 enable #define NVIC_EN1_INT39 0x00000080 // Interrupt 39 enable #define NVIC_EN1_INT38 0x00000040 // Interrupt 38 enable #define NVIC_EN1_INT37 0x00000020 // Interrupt 37 enable #define NVIC_EN1_INT36 0x00000010 // Interrupt 36 enable #define NVIC_EN1_INT35 0x00000008 // Interrupt 35 enable #define NVIC_EN1_INT34 0x00000004 // Interrupt 34 enable #define NVIC_EN1_INT33 0x00000002 // Interrupt 33 enable #define NVIC_EN1_INT32 0x00000001 // Interrupt 32 enable //***************************************************************************** // // The following are defines for the bit fields in the NVIC_DIS0 register. // //***************************************************************************** #define NVIC_DIS0_INT31 0x80000000 // Interrupt 31 disable #define NVIC_DIS0_INT30 0x40000000 // Interrupt 30 disable #define NVIC_DIS0_INT29 0x20000000 // Interrupt 29 disable #define NVIC_DIS0_INT28 0x10000000 // Interrupt 28 disable #define NVIC_DIS0_INT27 0x08000000 // Interrupt 27 disable #define NVIC_DIS0_INT26 0x04000000 // Interrupt 26 disable #define NVIC_DIS0_INT25 0x02000000 // Interrupt 25 disable #define NVIC_DIS0_INT24 0x01000000 // Interrupt 24 disable #define NVIC_DIS0_INT23 0x00800000 // Interrupt 23 disable #define NVIC_DIS0_INT22 0x00400000 // Interrupt 22 disable #define NVIC_DIS0_INT21 0x00200000 // Interrupt 21 disable #define NVIC_DIS0_INT20 0x00100000 // Interrupt 20 disable #define NVIC_DIS0_INT19 0x00080000 // Interrupt 19 disable #define NVIC_DIS0_INT18 0x00040000 // Interrupt 18 disable #define NVIC_DIS0_INT17 0x00020000 // Interrupt 17 disable #define NVIC_DIS0_INT16 0x00010000 // Interrupt 16 disable #define NVIC_DIS0_INT15 0x00008000 // Interrupt 15 disable #define NVIC_DIS0_INT14 0x00004000 // Interrupt 14 disable #define NVIC_DIS0_INT13 0x00002000 // Interrupt 13 disable #define NVIC_DIS0_INT12 0x00001000 // Interrupt 12 disable #define NVIC_DIS0_INT11 0x00000800 // Interrupt 11 disable #define NVIC_DIS0_INT10 0x00000400 // Interrupt 10 disable #define NVIC_DIS0_INT9 0x00000200 // Interrupt 9 disable #define NVIC_DIS0_INT8 0x00000100 // Interrupt 8 disable #define NVIC_DIS0_INT7 0x00000080 // Interrupt 7 disable #define NVIC_DIS0_INT6 0x00000040 // Interrupt 6 disable #define NVIC_DIS0_INT5 0x00000020 // Interrupt 5 disable #define NVIC_DIS0_INT4 0x00000010 // Interrupt 4 disable #define NVIC_DIS0_INT3 0x00000008 // Interrupt 3 disable #define NVIC_DIS0_INT2 0x00000004 // Interrupt 2 disable #define NVIC_DIS0_INT1 0x00000002 // Interrupt 1 disable #define NVIC_DIS0_INT0 0x00000001 // Interrupt 0 disable //***************************************************************************** // // The following are defines for the bit fields in the NVIC_DIS1 register. // //***************************************************************************** #define NVIC_DIS1_INT59 0x08000000 // Interrupt 59 disable #define NVIC_DIS1_INT58 0x04000000 // Interrupt 58 disable #define NVIC_DIS1_INT57 0x02000000 // Interrupt 57 disable #define NVIC_DIS1_INT56 0x01000000 // Interrupt 56 disable #define NVIC_DIS1_INT55 0x00800000 // Interrupt 55 disable #define NVIC_DIS1_INT54 0x00400000 // Interrupt 54 disable #define NVIC_DIS1_INT53 0x00200000 // Interrupt 53 disable #define NVIC_DIS1_INT52 0x00100000 // Interrupt 52 disable #define NVIC_DIS1_INT51 0x00080000 // Interrupt 51 disable #define NVIC_DIS1_INT50 0x00040000 // Interrupt 50 disable #define NVIC_DIS1_INT49 0x00020000 // Interrupt 49 disable #define NVIC_DIS1_INT48 0x00010000 // Interrupt 48 disable #define NVIC_DIS1_INT47 0x00008000 // Interrupt 47 disable #define NVIC_DIS1_INT46 0x00004000 // Interrupt 46 disable #define NVIC_DIS1_INT45 0x00002000 // Interrupt 45 disable #define NVIC_DIS1_INT44 0x00001000 // Interrupt 44 disable #define NVIC_DIS1_INT43 0x00000800 // Interrupt 43 disable #define NVIC_DIS1_INT42 0x00000400 // Interrupt 42 disable #define NVIC_DIS1_INT41 0x00000200 // Interrupt 41 disable #define NVIC_DIS1_INT40 0x00000100 // Interrupt 40 disable #define NVIC_DIS1_INT39 0x00000080 // Interrupt 39 disable #define NVIC_DIS1_INT38 0x00000040 // Interrupt 38 disable #define NVIC_DIS1_INT37 0x00000020 // Interrupt 37 disable #define NVIC_DIS1_INT36 0x00000010 // Interrupt 36 disable #define NVIC_DIS1_INT35 0x00000008 // Interrupt 35 disable #define NVIC_DIS1_INT34 0x00000004 // Interrupt 34 disable #define NVIC_DIS1_INT33 0x00000002 // Interrupt 33 disable #define NVIC_DIS1_INT32 0x00000001 // Interrupt 32 disable //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PEND0 register. // //***************************************************************************** #define NVIC_PEND0_INT31 0x80000000 // Interrupt 31 pend #define NVIC_PEND0_INT30 0x40000000 // Interrupt 30 pend #define NVIC_PEND0_INT29 0x20000000 // Interrupt 29 pend #define NVIC_PEND0_INT28 0x10000000 // Interrupt 28 pend #define NVIC_PEND0_INT27 0x08000000 // Interrupt 27 pend #define NVIC_PEND0_INT26 0x04000000 // Interrupt 26 pend #define NVIC_PEND0_INT25 0x02000000 // Interrupt 25 pend #define NVIC_PEND0_INT24 0x01000000 // Interrupt 24 pend #define NVIC_PEND0_INT23 0x00800000 // Interrupt 23 pend #define NVIC_PEND0_INT22 0x00400000 // Interrupt 22 pend #define NVIC_PEND0_INT21 0x00200000 // Interrupt 21 pend #define NVIC_PEND0_INT20 0x00100000 // Interrupt 20 pend #define NVIC_PEND0_INT19 0x00080000 // Interrupt 19 pend #define NVIC_PEND0_INT18 0x00040000 // Interrupt 18 pend #define NVIC_PEND0_INT17 0x00020000 // Interrupt 17 pend #define NVIC_PEND0_INT16 0x00010000 // Interrupt 16 pend #define NVIC_PEND0_INT15 0x00008000 // Interrupt 15 pend #define NVIC_PEND0_INT14 0x00004000 // Interrupt 14 pend #define NVIC_PEND0_INT13 0x00002000 // Interrupt 13 pend #define NVIC_PEND0_INT12 0x00001000 // Interrupt 12 pend #define NVIC_PEND0_INT11 0x00000800 // Interrupt 11 pend #define NVIC_PEND0_INT10 0x00000400 // Interrupt 10 pend #define NVIC_PEND0_INT9 0x00000200 // Interrupt 9 pend #define NVIC_PEND0_INT8 0x00000100 // Interrupt 8 pend #define NVIC_PEND0_INT7 0x00000080 // Interrupt 7 pend #define NVIC_PEND0_INT6 0x00000040 // Interrupt 6 pend #define NVIC_PEND0_INT5 0x00000020 // Interrupt 5 pend #define NVIC_PEND0_INT4 0x00000010 // Interrupt 4 pend #define NVIC_PEND0_INT3 0x00000008 // Interrupt 3 pend #define NVIC_PEND0_INT2 0x00000004 // Interrupt 2 pend #define NVIC_PEND0_INT1 0x00000002 // Interrupt 1 pend #define NVIC_PEND0_INT0 0x00000001 // Interrupt 0 pend //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PEND1 register. // //***************************************************************************** #define NVIC_PEND1_INT59 0x08000000 // Interrupt 59 pend #define NVIC_PEND1_INT58 0x04000000 // Interrupt 58 pend #define NVIC_PEND1_INT57 0x02000000 // Interrupt 57 pend #define NVIC_PEND1_INT56 0x01000000 // Interrupt 56 pend #define NVIC_PEND1_INT55 0x00800000 // Interrupt 55 pend #define NVIC_PEND1_INT54 0x00400000 // Interrupt 54 pend #define NVIC_PEND1_INT53 0x00200000 // Interrupt 53 pend #define NVIC_PEND1_INT52 0x00100000 // Interrupt 52 pend #define NVIC_PEND1_INT51 0x00080000 // Interrupt 51 pend #define NVIC_PEND1_INT50 0x00040000 // Interrupt 50 pend #define NVIC_PEND1_INT49 0x00020000 // Interrupt 49 pend #define NVIC_PEND1_INT48 0x00010000 // Interrupt 48 pend #define NVIC_PEND1_INT47 0x00008000 // Interrupt 47 pend #define NVIC_PEND1_INT46 0x00004000 // Interrupt 46 pend #define NVIC_PEND1_INT45 0x00002000 // Interrupt 45 pend #define NVIC_PEND1_INT44 0x00001000 // Interrupt 44 pend #define NVIC_PEND1_INT43 0x00000800 // Interrupt 43 pend #define NVIC_PEND1_INT42 0x00000400 // Interrupt 42 pend #define NVIC_PEND1_INT41 0x00000200 // Interrupt 41 pend #define NVIC_PEND1_INT40 0x00000100 // Interrupt 40 pend #define NVIC_PEND1_INT39 0x00000080 // Interrupt 39 pend #define NVIC_PEND1_INT38 0x00000040 // Interrupt 38 pend #define NVIC_PEND1_INT37 0x00000020 // Interrupt 37 pend #define NVIC_PEND1_INT36 0x00000010 // Interrupt 36 pend #define NVIC_PEND1_INT35 0x00000008 // Interrupt 35 pend #define NVIC_PEND1_INT34 0x00000004 // Interrupt 34 pend #define NVIC_PEND1_INT33 0x00000002 // Interrupt 33 pend #define NVIC_PEND1_INT32 0x00000001 // Interrupt 32 pend //***************************************************************************** // // The following are defines for the bit fields in the NVIC_UNPEND0 register. // //***************************************************************************** #define NVIC_UNPEND0_INT31 0x80000000 // Interrupt 31 unpend #define NVIC_UNPEND0_INT30 0x40000000 // Interrupt 30 unpend #define NVIC_UNPEND0_INT29 0x20000000 // Interrupt 29 unpend #define NVIC_UNPEND0_INT28 0x10000000 // Interrupt 28 unpend #define NVIC_UNPEND0_INT27 0x08000000 // Interrupt 27 unpend #define NVIC_UNPEND0_INT26 0x04000000 // Interrupt 26 unpend #define NVIC_UNPEND0_INT25 0x02000000 // Interrupt 25 unpend #define NVIC_UNPEND0_INT24 0x01000000 // Interrupt 24 unpend #define NVIC_UNPEND0_INT23 0x00800000 // Interrupt 23 unpend #define NVIC_UNPEND0_INT22 0x00400000 // Interrupt 22 unpend #define NVIC_UNPEND0_INT21 0x00200000 // Interrupt 21 unpend #define NVIC_UNPEND0_INT20 0x00100000 // Interrupt 20 unpend #define NVIC_UNPEND0_INT19 0x00080000 // Interrupt 19 unpend #define NVIC_UNPEND0_INT18 0x00040000 // Interrupt 18 unpend #define NVIC_UNPEND0_INT17 0x00020000 // Interrupt 17 unpend #define NVIC_UNPEND0_INT16 0x00010000 // Interrupt 16 unpend #define NVIC_UNPEND0_INT15 0x00008000 // Interrupt 15 unpend #define NVIC_UNPEND0_INT14 0x00004000 // Interrupt 14 unpend #define NVIC_UNPEND0_INT13 0x00002000 // Interrupt 13 unpend #define NVIC_UNPEND0_INT12 0x00001000 // Interrupt 12 unpend #define NVIC_UNPEND0_INT11 0x00000800 // Interrupt 11 unpend #define NVIC_UNPEND0_INT10 0x00000400 // Interrupt 10 unpend #define NVIC_UNPEND0_INT9 0x00000200 // Interrupt 9 unpend #define NVIC_UNPEND0_INT8 0x00000100 // Interrupt 8 unpend #define NVIC_UNPEND0_INT7 0x00000080 // Interrupt 7 unpend #define NVIC_UNPEND0_INT6 0x00000040 // Interrupt 6 unpend #define NVIC_UNPEND0_INT5 0x00000020 // Interrupt 5 unpend #define NVIC_UNPEND0_INT4 0x00000010 // Interrupt 4 unpend #define NVIC_UNPEND0_INT3 0x00000008 // Interrupt 3 unpend #define NVIC_UNPEND0_INT2 0x00000004 // Interrupt 2 unpend #define NVIC_UNPEND0_INT1 0x00000002 // Interrupt 1 unpend #define NVIC_UNPEND0_INT0 0x00000001 // Interrupt 0 unpend //***************************************************************************** // // The following are defines for the bit fields in the NVIC_UNPEND1 register. // //***************************************************************************** #define NVIC_UNPEND1_INT59 0x08000000 // Interrupt 59 unpend #define NVIC_UNPEND1_INT58 0x04000000 // Interrupt 58 unpend #define NVIC_UNPEND1_INT57 0x02000000 // Interrupt 57 unpend #define NVIC_UNPEND1_INT56 0x01000000 // Interrupt 56 unpend #define NVIC_UNPEND1_INT55 0x00800000 // Interrupt 55 unpend #define NVIC_UNPEND1_INT54 0x00400000 // Interrupt 54 unpend #define NVIC_UNPEND1_INT53 0x00200000 // Interrupt 53 unpend #define NVIC_UNPEND1_INT52 0x00100000 // Interrupt 52 unpend #define NVIC_UNPEND1_INT51 0x00080000 // Interrupt 51 unpend #define NVIC_UNPEND1_INT50 0x00040000 // Interrupt 50 unpend #define NVIC_UNPEND1_INT49 0x00020000 // Interrupt 49 unpend #define NVIC_UNPEND1_INT48 0x00010000 // Interrupt 48 unpend #define NVIC_UNPEND1_INT47 0x00008000 // Interrupt 47 unpend #define NVIC_UNPEND1_INT46 0x00004000 // Interrupt 46 unpend #define NVIC_UNPEND1_INT45 0x00002000 // Interrupt 45 unpend #define NVIC_UNPEND1_INT44 0x00001000 // Interrupt 44 unpend #define NVIC_UNPEND1_INT43 0x00000800 // Interrupt 43 unpend #define NVIC_UNPEND1_INT42 0x00000400 // Interrupt 42 unpend #define NVIC_UNPEND1_INT41 0x00000200 // Interrupt 41 unpend #define NVIC_UNPEND1_INT40 0x00000100 // Interrupt 40 unpend #define NVIC_UNPEND1_INT39 0x00000080 // Interrupt 39 unpend #define NVIC_UNPEND1_INT38 0x00000040 // Interrupt 38 unpend #define NVIC_UNPEND1_INT37 0x00000020 // Interrupt 37 unpend #define NVIC_UNPEND1_INT36 0x00000010 // Interrupt 36 unpend #define NVIC_UNPEND1_INT35 0x00000008 // Interrupt 35 unpend #define NVIC_UNPEND1_INT34 0x00000004 // Interrupt 34 unpend #define NVIC_UNPEND1_INT33 0x00000002 // Interrupt 33 unpend #define NVIC_UNPEND1_INT32 0x00000001 // Interrupt 32 unpend //***************************************************************************** // // The following are defines for the bit fields in the NVIC_ACTIVE0 register. // //***************************************************************************** #define NVIC_ACTIVE0_INT31 0x80000000 // Interrupt 31 active #define NVIC_ACTIVE0_INT30 0x40000000 // Interrupt 30 active #define NVIC_ACTIVE0_INT29 0x20000000 // Interrupt 29 active #define NVIC_ACTIVE0_INT28 0x10000000 // Interrupt 28 active #define NVIC_ACTIVE0_INT27 0x08000000 // Interrupt 27 active #define NVIC_ACTIVE0_INT26 0x04000000 // Interrupt 26 active #define NVIC_ACTIVE0_INT25 0x02000000 // Interrupt 25 active #define NVIC_ACTIVE0_INT24 0x01000000 // Interrupt 24 active #define NVIC_ACTIVE0_INT23 0x00800000 // Interrupt 23 active #define NVIC_ACTIVE0_INT22 0x00400000 // Interrupt 22 active #define NVIC_ACTIVE0_INT21 0x00200000 // Interrupt 21 active #define NVIC_ACTIVE0_INT20 0x00100000 // Interrupt 20 active #define NVIC_ACTIVE0_INT19 0x00080000 // Interrupt 19 active #define NVIC_ACTIVE0_INT18 0x00040000 // Interrupt 18 active #define NVIC_ACTIVE0_INT17 0x00020000 // Interrupt 17 active #define NVIC_ACTIVE0_INT16 0x00010000 // Interrupt 16 active #define NVIC_ACTIVE0_INT15 0x00008000 // Interrupt 15 active #define NVIC_ACTIVE0_INT14 0x00004000 // Interrupt 14 active #define NVIC_ACTIVE0_INT13 0x00002000 // Interrupt 13 active #define NVIC_ACTIVE0_INT12 0x00001000 // Interrupt 12 active #define NVIC_ACTIVE0_INT11 0x00000800 // Interrupt 11 active #define NVIC_ACTIVE0_INT10 0x00000400 // Interrupt 10 active #define NVIC_ACTIVE0_INT9 0x00000200 // Interrupt 9 active #define NVIC_ACTIVE0_INT8 0x00000100 // Interrupt 8 active #define NVIC_ACTIVE0_INT7 0x00000080 // Interrupt 7 active #define NVIC_ACTIVE0_INT6 0x00000040 // Interrupt 6 active #define NVIC_ACTIVE0_INT5 0x00000020 // Interrupt 5 active #define NVIC_ACTIVE0_INT4 0x00000010 // Interrupt 4 active #define NVIC_ACTIVE0_INT3 0x00000008 // Interrupt 3 active #define NVIC_ACTIVE0_INT2 0x00000004 // Interrupt 2 active #define NVIC_ACTIVE0_INT1 0x00000002 // Interrupt 1 active #define NVIC_ACTIVE0_INT0 0x00000001 // Interrupt 0 active //***************************************************************************** // // The following are defines for the bit fields in the NVIC_ACTIVE1 register. // //***************************************************************************** #define NVIC_ACTIVE1_INT59 0x08000000 // Interrupt 59 active #define NVIC_ACTIVE1_INT58 0x04000000 // Interrupt 58 active #define NVIC_ACTIVE1_INT57 0x02000000 // Interrupt 57 active #define NVIC_ACTIVE1_INT56 0x01000000 // Interrupt 56 active #define NVIC_ACTIVE1_INT55 0x00800000 // Interrupt 55 active #define NVIC_ACTIVE1_INT54 0x00400000 // Interrupt 54 active #define NVIC_ACTIVE1_INT53 0x00200000 // Interrupt 53 active #define NVIC_ACTIVE1_INT52 0x00100000 // Interrupt 52 active #define NVIC_ACTIVE1_INT51 0x00080000 // Interrupt 51 active #define NVIC_ACTIVE1_INT50 0x00040000 // Interrupt 50 active #define NVIC_ACTIVE1_INT49 0x00020000 // Interrupt 49 active #define NVIC_ACTIVE1_INT48 0x00010000 // Interrupt 48 active #define NVIC_ACTIVE1_INT47 0x00008000 // Interrupt 47 active #define NVIC_ACTIVE1_INT46 0x00004000 // Interrupt 46 active #define NVIC_ACTIVE1_INT45 0x00002000 // Interrupt 45 active #define NVIC_ACTIVE1_INT44 0x00001000 // Interrupt 44 active #define NVIC_ACTIVE1_INT43 0x00000800 // Interrupt 43 active #define NVIC_ACTIVE1_INT42 0x00000400 // Interrupt 42 active #define NVIC_ACTIVE1_INT41 0x00000200 // Interrupt 41 active #define NVIC_ACTIVE1_INT40 0x00000100 // Interrupt 40 active #define NVIC_ACTIVE1_INT39 0x00000080 // Interrupt 39 active #define NVIC_ACTIVE1_INT38 0x00000040 // Interrupt 38 active #define NVIC_ACTIVE1_INT37 0x00000020 // Interrupt 37 active #define NVIC_ACTIVE1_INT36 0x00000010 // Interrupt 36 active #define NVIC_ACTIVE1_INT35 0x00000008 // Interrupt 35 active #define NVIC_ACTIVE1_INT34 0x00000004 // Interrupt 34 active #define NVIC_ACTIVE1_INT33 0x00000002 // Interrupt 33 active #define NVIC_ACTIVE1_INT32 0x00000001 // Interrupt 32 active //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI0 register. // //***************************************************************************** #define NVIC_PRI0_INT3_M 0xFF000000 // Interrupt 3 priority mask #define NVIC_PRI0_INT2_M 0x00FF0000 // Interrupt 2 priority mask #define NVIC_PRI0_INT1_M 0x0000FF00 // Interrupt 1 priority mask #define NVIC_PRI0_INT0_M 0x000000FF // Interrupt 0 priority mask #define NVIC_PRI0_INT3_S 24 #define NVIC_PRI0_INT2_S 16 #define NVIC_PRI0_INT1_S 8 #define NVIC_PRI0_INT0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI1 register. // //***************************************************************************** #define NVIC_PRI1_INT7_M 0xFF000000 // Interrupt 7 priority mask #define NVIC_PRI1_INT6_M 0x00FF0000 // Interrupt 6 priority mask #define NVIC_PRI1_INT5_M 0x0000FF00 // Interrupt 5 priority mask #define NVIC_PRI1_INT4_M 0x000000FF // Interrupt 4 priority mask #define NVIC_PRI1_INT7_S 24 #define NVIC_PRI1_INT6_S 16 #define NVIC_PRI1_INT5_S 8 #define NVIC_PRI1_INT4_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI2 register. // //***************************************************************************** #define NVIC_PRI2_INT11_M 0xFF000000 // Interrupt 11 priority mask #define NVIC_PRI2_INT10_M 0x00FF0000 // Interrupt 10 priority mask #define NVIC_PRI2_INT9_M 0x0000FF00 // Interrupt 9 priority mask #define NVIC_PRI2_INT8_M 0x000000FF // Interrupt 8 priority mask #define NVIC_PRI2_INT11_S 24 #define NVIC_PRI2_INT10_S 16 #define NVIC_PRI2_INT9_S 8 #define NVIC_PRI2_INT8_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI3 register. // //***************************************************************************** #define NVIC_PRI3_INT15_M 0xFF000000 // Interrupt 15 priority mask #define NVIC_PRI3_INT14_M 0x00FF0000 // Interrupt 14 priority mask #define NVIC_PRI3_INT13_M 0x0000FF00 // Interrupt 13 priority mask #define NVIC_PRI3_INT12_M 0x000000FF // Interrupt 12 priority mask #define NVIC_PRI3_INT15_S 24 #define NVIC_PRI3_INT14_S 16 #define NVIC_PRI3_INT13_S 8 #define NVIC_PRI3_INT12_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI4 register. // //***************************************************************************** #define NVIC_PRI4_INT19_M 0xFF000000 // Interrupt 19 priority mask #define NVIC_PRI4_INT18_M 0x00FF0000 // Interrupt 18 priority mask #define NVIC_PRI4_INT17_M 0x0000FF00 // Interrupt 17 priority mask #define NVIC_PRI4_INT16_M 0x000000FF // Interrupt 16 priority mask #define NVIC_PRI4_INT19_S 24 #define NVIC_PRI4_INT18_S 16 #define NVIC_PRI4_INT17_S 8 #define NVIC_PRI4_INT16_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI5 register. // //***************************************************************************** #define NVIC_PRI5_INT23_M 0xFF000000 // Interrupt 23 priority mask #define NVIC_PRI5_INT22_M 0x00FF0000 // Interrupt 22 priority mask #define NVIC_PRI5_INT21_M 0x0000FF00 // Interrupt 21 priority mask #define NVIC_PRI5_INT20_M 0x000000FF // Interrupt 20 priority mask #define NVIC_PRI5_INT23_S 24 #define NVIC_PRI5_INT22_S 16 #define NVIC_PRI5_INT21_S 8 #define NVIC_PRI5_INT20_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI6 register. // //***************************************************************************** #define NVIC_PRI6_INT27_M 0xFF000000 // Interrupt 27 priority mask #define NVIC_PRI6_INT26_M 0x00FF0000 // Interrupt 26 priority mask #define NVIC_PRI6_INT25_M 0x0000FF00 // Interrupt 25 priority mask #define NVIC_PRI6_INT24_M 0x000000FF // Interrupt 24 priority mask #define NVIC_PRI6_INT27_S 24 #define NVIC_PRI6_INT26_S 16 #define NVIC_PRI6_INT25_S 8 #define NVIC_PRI6_INT24_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI7 register. // //***************************************************************************** #define NVIC_PRI7_INT31_M 0xFF000000 // Interrupt 31 priority mask #define NVIC_PRI7_INT30_M 0x00FF0000 // Interrupt 30 priority mask #define NVIC_PRI7_INT29_M 0x0000FF00 // Interrupt 29 priority mask #define NVIC_PRI7_INT28_M 0x000000FF // Interrupt 28 priority mask #define NVIC_PRI7_INT31_S 24 #define NVIC_PRI7_INT30_S 16 #define NVIC_PRI7_INT29_S 8 #define NVIC_PRI7_INT28_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI8 register. // //***************************************************************************** #define NVIC_PRI8_INT35_M 0xFF000000 // Interrupt 35 priority mask #define NVIC_PRI8_INT34_M 0x00FF0000 // Interrupt 34 priority mask #define NVIC_PRI8_INT33_M 0x0000FF00 // Interrupt 33 priority mask #define NVIC_PRI8_INT32_M 0x000000FF // Interrupt 32 priority mask #define NVIC_PRI8_INT35_S 24 #define NVIC_PRI8_INT34_S 16 #define NVIC_PRI8_INT33_S 8 #define NVIC_PRI8_INT32_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI9 register. // //***************************************************************************** #define NVIC_PRI9_INT39_M 0xFF000000 // Interrupt 39 priority mask #define NVIC_PRI9_INT38_M 0x00FF0000 // Interrupt 38 priority mask #define NVIC_PRI9_INT37_M 0x0000FF00 // Interrupt 37 priority mask #define NVIC_PRI9_INT36_M 0x000000FF // Interrupt 36 priority mask #define NVIC_PRI9_INT39_S 24 #define NVIC_PRI9_INT38_S 16 #define NVIC_PRI9_INT37_S 8 #define NVIC_PRI9_INT36_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_PRI10 register. // //***************************************************************************** #define NVIC_PRI10_INT43_M 0xFF000000 // Interrupt 43 priority mask #define NVIC_PRI10_INT42_M 0x00FF0000 // Interrupt 42 priority mask #define NVIC_PRI10_INT41_M 0x0000FF00 // Interrupt 41 priority mask #define NVIC_PRI10_INT40_M 0x000000FF // Interrupt 40 priority mask #define NVIC_PRI10_INT43_S 24 #define NVIC_PRI10_INT42_S 16 #define NVIC_PRI10_INT41_S 8 #define NVIC_PRI10_INT40_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_CPUID register. // //***************************************************************************** #define NVIC_CPUID_IMP_M 0xFF000000 // Implementer #define NVIC_CPUID_VAR_M 0x00F00000 // Variant #define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Processor part number #define NVIC_CPUID_REV_M 0x0000000F // Revision //***************************************************************************** // // The following are defines for the bit fields in the NVIC_INT_CTRL register. // //***************************************************************************** #define NVIC_INT_CTRL_NMI_SET 0x80000000 // Pend a NMI #define NVIC_INT_CTRL_PEND_SV 0x10000000 // Pend a PendSV #define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // Unpend a PendSV #define NVIC_INT_CTRL_PENDSTSET 0x04000000 // Set pending SysTick interrupt #define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // Clear pending SysTick interrupt #define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug interrupt handling #define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Debug interrupt pending #define NVIC_INT_CTRL_VEC_PEN_M 0x003FF000 // Highest pending exception #define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to base #define NVIC_INT_CTRL_VEC_ACT_M 0x000003FF // Current active exception #define NVIC_INT_CTRL_VEC_PEN_S 12 #define NVIC_INT_CTRL_VEC_ACT_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_VTABLE register. // //***************************************************************************** #define NVIC_VTABLE_BASE 0x20000000 // Vector table base #define NVIC_VTABLE_OFFSET_M 0x1FFFFF00 // Vector table offset #define NVIC_VTABLE_OFFSET_S 8 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_APINT register. // //***************************************************************************** #define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Vector key mask #define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key #define NVIC_APINT_ENDIANESS 0x00008000 // Data endianess #define NVIC_APINT_PRIGROUP_M 0x00000700 // Priority group #define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split #define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split #define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split #define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split #define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split #define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split #define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split #define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split #define NVIC_APINT_SYSRESETREQ 0x00000004 // System reset request #define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear active NMI/fault info #define NVIC_APINT_VECT_RESET 0x00000001 // System reset //***************************************************************************** // // The following are defines for the bit fields in the NVIC_SYS_CTRL register. // //***************************************************************************** #define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wakeup on pend #define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep sleep enable #define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR exit //***************************************************************************** // // The following are defines for the bit fields in the NVIC_CFG_CTRL register. // //***************************************************************************** #define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore bus fault in NMI/fault #define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on divide by 0 #define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on unaligned access #define NVIC_CFG_CTRL_DEEP_PEND 0x00000004 // Allow deep interrupt trigger #define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow main interrupt trigger #define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread state control //***************************************************************************** // // The following are defines for the bit fields in the NVIC_SYS_PRI1 register. // //***************************************************************************** #define NVIC_SYS_PRI1_RES_M 0xFF000000 // Priority of reserved handler #define NVIC_SYS_PRI1_USAGE_M 0x00FF0000 // Priority of usage fault handler #define NVIC_SYS_PRI1_BUS_M 0x0000FF00 // Priority of bus fault handler #define NVIC_SYS_PRI1_MEM_M 0x000000FF // Priority of mem manage handler #define NVIC_SYS_PRI1_USAGE_S 16 #define NVIC_SYS_PRI1_BUS_S 8 #define NVIC_SYS_PRI1_MEM_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_SYS_PRI2 register. // //***************************************************************************** #define NVIC_SYS_PRI2_SVC_M 0xFF000000 // Priority of SVCall handler #define NVIC_SYS_PRI2_RES_M 0x00FFFFFF // Priority of reserved handlers #define NVIC_SYS_PRI2_SVC_S 24 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_SYS_PRI3 register. // //***************************************************************************** #define NVIC_SYS_PRI3_TICK_M 0xFF000000 // Priority of Sys Tick handler #define NVIC_SYS_PRI3_PENDSV_M 0x00FF0000 // Priority of PendSV handler #define NVIC_SYS_PRI3_RES_M 0x0000FF00 // Priority of reserved handler #define NVIC_SYS_PRI3_DEBUG_M 0x000000FF // Priority of debug handler #define NVIC_SYS_PRI3_TICK_S 24 #define NVIC_SYS_PRI3_PENDSV_S 16 #define NVIC_SYS_PRI3_DEBUG_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_SYS_HND_CTRL // register. // //***************************************************************************** #define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage fault enable #define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus fault enable #define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Mem manage fault enable #define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVCall is pended #define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus fault is pended #define NVIC_SYS_HND_CTRL_TICK 0x00000800 // Sys tick is active #define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV is active #define NVIC_SYS_HND_CTRL_MON 0x00000100 // Monitor is active #define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVCall is active #define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage fault is active #define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus fault is active #define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Mem manage is active //***************************************************************************** // // The following are defines for the bit fields in the NVIC_FAULT_STAT // register. // //***************************************************************************** #define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide by zero fault #define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned access fault #define NVIC_FAULT_STAT_NOCP 0x00080000 // No coprocessor fault #define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC fault #define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid state fault #define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined instruction fault #define NVIC_FAULT_STAT_BFARV 0x00008000 // BFAR is valid #define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack bus fault #define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack bus fault #define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise data bus error #define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise data bus error #define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction bus fault #define NVIC_FAULT_STAT_MMARV 0x00000080 // MMAR is valid #define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack access violation #define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack access violation #define NVIC_FAULT_STAT_DERR 0x00000002 // Data access violation #define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction access violation //***************************************************************************** // // The following are defines for the bit fields in the NVIC_HFAULT_STAT // register. // //***************************************************************************** #define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug event #define NVIC_HFAULT_STAT_FORCED 0x40000000 // Cannot execute fault handler #define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector table read fault //***************************************************************************** // // The following are defines for the bit fields in the NVIC_DEBUG_STAT // register. // //***************************************************************************** #define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted #define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch #define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match #define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction #define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request //***************************************************************************** // // The following are defines for the bit fields in the NVIC_MM_ADDR register. // //***************************************************************************** #define NVIC_MM_ADDR_M 0xFFFFFFFF // Data fault address #define NVIC_MM_ADDR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_FAULT_ADDR // register. // //***************************************************************************** #define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Data bus fault address #define NVIC_FAULT_ADDR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_MPU_TYPE register. // //***************************************************************************** #define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I regions #define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D regions #define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or unified MPU #define NVIC_MPU_TYPE_IREGION_S 16 #define NVIC_MPU_TYPE_DREGION_S 8 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_MPU_CTRL register. // //***************************************************************************** #define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU default region in priv mode #define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU enabled during faults #define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU enable //***************************************************************************** // // The following are defines for the bit fields in the NVIC_MPU_NUMBER // register. // //***************************************************************************** #define NVIC_MPU_NUMBER_M 0x000000FF // MPU region to access #define NVIC_MPU_NUMBER_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_MPU_BASE register. // //***************************************************************************** #define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base address mask #define NVIC_MPU_BASE_VALID 0x00000010 // Region number valid #define NVIC_MPU_BASE_REGION_M 0x0000000F // Region number #define NVIC_MPU_BASE_ADDR_S 8 #define NVIC_MPU_BASE_REGION_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_MPU_ATTR register. // //***************************************************************************** #define NVIC_MPU_ATTR_M 0xFFFF0000 // Attributes #define NVIC_MPU_ATTR_AP_NO_NO 0x00000000 // prv: no access, usr: no access #define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable #define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable #define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable #define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type extension mask #define NVIC_MPU_ATTR_AP_RW_NO 0x01000000 // prv: rw, usr: none #define NVIC_MPU_ATTR_AP_RW_RO 0x02000000 // prv: rw, usr: read-only #define NVIC_MPU_ATTR_AP_RW_RW 0x03000000 // prv: rw, usr: rw #define NVIC_MPU_ATTR_AP_RO_NO 0x05000000 // prv: ro, usr: none #define NVIC_MPU_ATTR_AP_RO_RO 0x06000000 // prv: ro, usr: ro #define NVIC_MPU_ATTR_AP_M 0x07000000 // Access permissions mask #define NVIC_MPU_ATTR_XN 0x10000000 // Execute disable #define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Sub-region disable mask #define NVIC_MPU_ATTR_SRD_0 0x00000100 // Sub-region 0 disable #define NVIC_MPU_ATTR_SRD_1 0x00000200 // Sub-region 1 disable #define NVIC_MPU_ATTR_SRD_2 0x00000400 // Sub-region 2 disable #define NVIC_MPU_ATTR_SRD_3 0x00000800 // Sub-region 3 disable #define NVIC_MPU_ATTR_SRD_4 0x00001000 // Sub-region 4 disable #define NVIC_MPU_ATTR_SRD_5 0x00002000 // Sub-region 5 disable #define NVIC_MPU_ATTR_SRD_6 0x00004000 // Sub-region 6 disable #define NVIC_MPU_ATTR_SRD_7 0x00008000 // Sub-region 7 disable #define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region size mask #define NVIC_MPU_ATTR_SIZE_32B 0x00000008 // Region size 32 bytes #define NVIC_MPU_ATTR_SIZE_64B 0x0000000A // Region size 64 bytes #define NVIC_MPU_ATTR_SIZE_128B 0x0000000C // Region size 128 bytes #define NVIC_MPU_ATTR_SIZE_256B 0x0000000E // Region size 256 bytes #define NVIC_MPU_ATTR_SIZE_512B 0x00000010 // Region size 512 bytes #define NVIC_MPU_ATTR_SIZE_1K 0x00000012 // Region size 1 Kbytes #define NVIC_MPU_ATTR_SIZE_2K 0x00000014 // Region size 2 Kbytes #define NVIC_MPU_ATTR_SIZE_4K 0x00000016 // Region size 4 Kbytes #define NVIC_MPU_ATTR_SIZE_8K 0x00000018 // Region size 8 Kbytes #define NVIC_MPU_ATTR_SIZE_16K 0x0000001A // Region size 16 Kbytes #define NVIC_MPU_ATTR_SIZE_32K 0x0000001C // Region size 32 Kbytes #define NVIC_MPU_ATTR_SIZE_64K 0x0000001E // Region size 64 Kbytes #define NVIC_MPU_ATTR_SIZE_128K 0x00000020 // Region size 128 Kbytes #define NVIC_MPU_ATTR_SIZE_256K 0x00000022 // Region size 256 Kbytes #define NVIC_MPU_ATTR_SIZE_512K 0x00000024 // Region size 512 Kbytes #define NVIC_MPU_ATTR_SIZE_1M 0x00000026 // Region size 1 Mbytes #define NVIC_MPU_ATTR_SIZE_2M 0x00000028 // Region size 2 Mbytes #define NVIC_MPU_ATTR_SIZE_4M 0x0000002A // Region size 4 Mbytes #define NVIC_MPU_ATTR_SIZE_8M 0x0000002C // Region size 8 Mbytes #define NVIC_MPU_ATTR_SIZE_16M 0x0000002E // Region size 16 Mbytes #define NVIC_MPU_ATTR_SIZE_32M 0x00000030 // Region size 32 Mbytes #define NVIC_MPU_ATTR_SIZE_64M 0x00000032 // Region size 64 Mbytes #define NVIC_MPU_ATTR_SIZE_128M 0x00000034 // Region size 128 Mbytes #define NVIC_MPU_ATTR_SIZE_256M 0x00000036 // Region size 256 Mbytes #define NVIC_MPU_ATTR_SIZE_512M 0x00000038 // Region size 512 Mbytes #define NVIC_MPU_ATTR_SIZE_1G 0x0000003A // Region size 1 Gbytes #define NVIC_MPU_ATTR_SIZE_2G 0x0000003C // Region size 2 Gbytes #define NVIC_MPU_ATTR_SIZE_4G 0x0000003E // Region size 4 Gbytes #define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region enable //***************************************************************************** // // The following are defines for the bit fields in the NVIC_DBG_CTRL register. // //***************************************************************************** #define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask #define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key #define NVIC_DBG_CTRL_S_RESET_ST \ 0x02000000 // Core has reset since last read #define NVIC_DBG_CTRL_S_RETIRE_ST \ 0x01000000 // Core has executed insruction // since last read #define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up #define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping #define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt #define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available #define NVIC_DBG_CTRL_C_SNAPSTALL \ 0x00000020 // Breaks a stalled load/store #define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping #define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core #define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core #define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug //***************************************************************************** // // The following are defines for the bit fields in the NVIC_DBG_XFER register. // //***************************************************************************** #define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read #define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register #define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0 #define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1 #define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2 #define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3 #define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4 #define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5 #define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6 #define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7 #define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8 #define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9 #define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10 #define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11 #define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12 #define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13 #define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14 #define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15 #define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register #define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP #define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP #define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP #define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask //***************************************************************************** // // The following are defines for the bit fields in the NVIC_DBG_DATA register. // //***************************************************************************** #define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache #define NVIC_DBG_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the NVIC_DBG_INT register. // //***************************************************************************** #define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault #define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors #define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error #define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state #define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check #define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error #define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault #define NVIC_DBG_INT_RESET 0x00000008 // Core reset status #define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset #define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending #define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch //***************************************************************************** // // The following are defines for the bit fields in the NVIC_SW_TRIG register. // //***************************************************************************** #define NVIC_SW_TRIG_INTID_M 0x000003FF // Interrupt to trigger #define NVIC_SW_TRIG_INTID_S 0 #endif // __HW_NVIC_H__