/* * Copyright (c) 2015, Freescale Semiconductor, Inc. * Copyright 2016-2021 NXP * Copyright (c) 2022 HPMicro * * SPDX-License-Identifier: BSD-3-Clause * */ #ifndef _HPM_WM8960_H_ #define _HPM_WM8960_H_ //#include "hpm_i2c_drv.h" //#include "hpm_common.h" #include #include #include "rtt_board.h" #include "drivers/dev_i2c.h" #include "hpm_wm8960_regs.h" #define WM8960_I2C_ADDR 0x1A typedef enum wm8960_module { wm8960_module_adc = 0, /* ADC module in WM8960 */ wm8960_module_dac = 1, /* DAC module in WM8960 */ wm8960_module_vref = 2, /* VREF module */ wm8960_module_headphone = 3, /* Headphone */ wm8960_module_micbais = 4, /* Mic bias */ wm8960_module_ana_in = 6, /* Analog in PGA */ wm8960_module_lineout = 7, /* Line out module */ wm8960_module_speaker = 8, /* Speaker module */ wm8960_module_output_mixer = 9, /* Output mixer */ } wm8960_module_t; /* wm8960 play source for output mixer */ typedef enum wm8960_play_source { wm8960_play_source_input_mixer = 1, /* Input Boost Mixer to Output Mixer */ wm8960_play_source_input3 = 2, /* L/RINPUT3 to Output Mixer */ wm8960_play_source_dac = 4, /* DAC to Output Mixer */ } wm8960_play_source_t; /* WM8960 data route */ typedef enum wm8960_route { wm8960_route_bypass = 0, /* ANA_IN->Headphone. */ wm8960_route_playback = 1, /* I2SIN->DAC->Headphone. */ wm8960_route_playback_and_record = 2, /* I2SIN->DAC->Headphone, ANA_IN->ADC->I2SOUT. */ wm8960_route_record = 5 /* ANA_IN->ADC->I2SOUT. */ } wm8960_route_t; /* The audio data transfer protocol choice */ typedef enum wm8960_protocol { wm8960_bus_i2s = 2, /* I2S type */ wm8960_bus_left_justified = 1, /* Left justified mode */ wm8960_bus_right_justified = 0, /* Right justified mode */ wm8960_bus_pcma = 3, /* PCM A mode */ wm8960_bus_pcmb = 3 | (1 << 4) /* PCM B mode */ } wm8960_protocol_t; /* wm8960 input source */ typedef enum wm8960_input { wm8960_input_closed = 0, /* Input device is closed */ wm8960_input_single_ended_mic = 1, /* Input as single ended mic, only use L/RINPUT1 */ wm8960_input_differential_mic_input2 = 2, /* Input as differential mic, use L/RINPUT1 and L/RINPUT2 */ wm8960_input_differential_mic_input3 = 3, /* Input as differential mic, use L/RINPUT1 and L/RINPUT3*/ wm8960_input_line_input2 = 4, /* Input as line input, only use L/RINPUT2 */ wm8960_input_line_input3 = 5 /* Input as line input, only use L/RINPUT3 */ } wm8960_input_t; /* wm8960 audio format */ typedef struct wm8960_audio_format { uint32_t mclk_hz; /* master clock frequency */ uint32_t sample_rate; /* sample rate */ uint32_t bit_width; /* bit width */ } wm8960_audio_format_t; /* configure structure of WM8960 */ typedef struct wm8960_config { wm8960_route_t route; /* Audio data route.*/ wm8960_protocol_t bus; /* Audio transfer protocol */ bool enable_speaker; /* True means enable class D speaker as output, false means no */ wm8960_input_t left_input; /* Left input source for WM8960 */ wm8960_input_t right_input; /* Right input source for wm8960 */ wm8960_play_source_t play_source; /* play source */ wm8960_audio_format_t format; /* Audio format */ } wm8960_config_t; typedef struct { struct rt_i2c_bus_device *i2c_bus; /* I2C bus device */ uint8_t slave_address; /* code device address */ } wm8960_control_t; #if defined(__cplusplus) extern "C" { #endif /** * @brief WM8960 initialize function. * * @param control WM8960 control structure. * @param config WM8960 configuration structure. */ hpm_stat_t wm8960_init(wm8960_control_t *control, wm8960_config_t *config); /** * @brief Deinit the WM8960 codec. * * This function close all modules in WM8960 to save power. * * @param control WM8960 control structure pointer. */ hpm_stat_t wm8960_deinit(wm8960_control_t *control); /** * @brief Set audio data route in WM8960. * * This function would set the data route according to route. * * @param control WM8960 control structure. * @param config Audio configure structure in WM8960. */ hpm_stat_t wm8960_set_data_route(wm8960_control_t *control, wm8960_config_t *config); /** * @brief Set left audio input source in WM8960. * * @param control WM8960 control structure. * @param input Audio input source. */ hpm_stat_t wm8960_set_left_input(wm8960_control_t *control, wm8960_input_t input); /** * @brief Set right audio input source in WM8960. * * @param control WM8960 control structure. * @param input Audio input source. */ hpm_stat_t wm8960_set_right_input(wm8960_control_t *control, wm8960_input_t input); /** * @brief Set the audio transfer protocol. * * @param control WM8960 control structure. * @param protocol Audio data transfer protocol. */ hpm_stat_t wm8960_set_protocol(wm8960_control_t *control, wm8960_protocol_t protocol); /** * @brief Set the volume of different modules in WM8960. * * This function would set the volume of WM8960 modules. Uses need to appoint the module. * The function assume that left channel and right channel has the same volume. * * Module:wm8960_module_adc, volume range value: 0 is mute, 1-255 is -97db to 30db * Module:wm8960_module_dac, volume range value: 0 is mute, 1-255 is -127db to 0db * Module:wm8960_module_headphone, volume range value: 0 - 2F is mute, 0x30 - 0x7F is -73db to 6db * Module:wm8960_module_ana_in, volume range value: 0 - 0x3F is -17.25db to 30db * Module:wm8960_module_speaker, volume range value: 0 - 2F is mute, 0x30 - 0x7F is -73db to 6db * * * @param control WM8960 control structure. * @param module Module to set volume, it can be ADC, DAC, Headphone and so on. * @param volume Volume value need to be set. */ hpm_stat_t wm8960_set_volume(wm8960_control_t *control, wm8960_module_t module, uint32_t volume); /** * @brief Enable/disable expected module. * * @param control WM8960 control structure. * @param module Module expected to enable. * @param enable Enable or disable moudles. */ hpm_stat_t wm8960_set_module(wm8960_control_t *control, wm8960_module_t module, bool enable); /** * @brief SET the WM8960 play source. * * @param control WM8960 control structure. * @param play_source play source * * @return kStatus_WM8904_Success if successful, different code otherwise.. */ hpm_stat_t wm8960_config_input_to_output_mixer(wm8960_control_t *control, uint32_t play_source); /** * @brief Configure the data format of audio data. * * This function would configure the registers about the sample rate, bit depths. * * @param control WM8960 control structure pointer. * @param sysclk system clock of the codec which can be generated by MCLK or PLL output. * @param sample_rate Sample rate of audio file running in WM8960. WM8960 now * supports 8k, 11.025k, 12k, 16k, 22.05k, 24k, 32k, 44.1k, 48k and 96k sample rate. * @param bits Bit depth of audio file (WM8960 only supports 16bit, 20bit, 24bit * and 32 bit in HW). */ hpm_stat_t wm8960_set_data_format(wm8960_control_t *control, uint32_t sysclk, uint32_t sample_rate, uint32_t bits); /** * @brief Write register to WM8960 using I2C. * * @param control WM8960 control structure. * @param reg The register address in WM8960. * @param val Value needs to write into the register. */ hpm_stat_t wm8960_write_reg(wm8960_control_t *control, uint8_t reg, uint16_t val); /** * @brief Read register from WM8960 using I2C. * @param reg The register address in WM8960. * @param val Value written to. */ hpm_stat_t wm8960_read_reg(uint8_t reg, uint16_t *val); /** * @brief Modify some bits in the register using I2C. * @param control WM8960 control structure. * @param reg The register address in WM8960. * @param mask The mask code for the bits want to write. The bit you want to write should be 0. * @param val Value needs to write into the register. */ hpm_stat_t wm8960_modify_reg(wm8960_control_t *control, uint8_t reg, uint16_t mask, uint16_t val); #endif /* _HPM_WM8960_H_ */