//***************************************************************************** // // hw_ethernet.h - Macros used when accessing the Ethernet hardware. // // Copyright (c) 2006-2010 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 6459 of the Stellaris Firmware Development Package. // //***************************************************************************** #ifndef __HW_ETHERNET_H__ #define __HW_ETHERNET_H__ //***************************************************************************** // // The following are defines for the Ethernet MAC register offsets. // //***************************************************************************** #define MAC_O_RIS 0x00000000 // Ethernet MAC Raw Interrupt // Status/Acknowledge #define MAC_O_IACK 0x00000000 // Ethernet MAC Raw Interrupt // Status/Acknowledge #define MAC_O_IM 0x00000004 // Ethernet MAC Interrupt Mask #define MAC_O_RCTL 0x00000008 // Ethernet MAC Receive Control #define MAC_O_TCTL 0x0000000C // Ethernet MAC Transmit Control #define MAC_O_DATA 0x00000010 // Ethernet MAC Data #define MAC_O_IA0 0x00000014 // Ethernet MAC Individual Address // 0 #define MAC_O_IA1 0x00000018 // Ethernet MAC Individual Address // 1 #define MAC_O_THR 0x0000001C // Ethernet MAC Threshold #define MAC_O_MCTL 0x00000020 // Ethernet MAC Management Control #define MAC_O_MDV 0x00000024 // Ethernet MAC Management Divider #define MAC_O_MTXD 0x0000002C // Ethernet MAC Management Transmit // Data #define MAC_O_MRXD 0x00000030 // Ethernet MAC Management Receive // Data #define MAC_O_NP 0x00000034 // Ethernet MAC Number of Packets #define MAC_O_TR 0x00000038 // Ethernet MAC Transmission // Request #define MAC_O_TS 0x0000003C // Ethernet MAC Timer Support #define MAC_O_LED 0x00000040 // Ethernet MAC LED Encoding #define MAC_O_MDIX 0x00000044 // Ethernet PHY MDIX //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_RIS register. // //***************************************************************************** #define MAC_RIS_PHYINT 0x00000040 // PHY Interrupt #define MAC_RIS_MDINT 0x00000020 // MII Transaction Complete #define MAC_RIS_RXER 0x00000010 // Receive Error #define MAC_RIS_FOV 0x00000008 // FIFO Overrun #define MAC_RIS_TXEMP 0x00000004 // Transmit FIFO Empty #define MAC_RIS_TXER 0x00000002 // Transmit Error #define MAC_RIS_RXINT 0x00000001 // Packet Received //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_IACK register. // //***************************************************************************** #define MAC_IACK_PHYINT 0x00000040 // Clear PHY Interrupt #define MAC_IACK_MDINT 0x00000020 // Clear MII Transaction Complete #define MAC_IACK_RXER 0x00000010 // Clear Receive Error #define MAC_IACK_FOV 0x00000008 // Clear FIFO Overrun #define MAC_IACK_TXEMP 0x00000004 // Clear Transmit FIFO Empty #define MAC_IACK_TXER 0x00000002 // Clear Transmit Error #define MAC_IACK_RXINT 0x00000001 // Clear Packet Received //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_IM register. // //***************************************************************************** #define MAC_IM_PHYINTM 0x00000040 // Mask PHY Interrupt #define MAC_IM_MDINTM 0x00000020 // Mask MII Transaction Complete #define MAC_IM_RXERM 0x00000010 // Mask Receive Error #define MAC_IM_FOVM 0x00000008 // Mask FIFO Overrun #define MAC_IM_TXEMPM 0x00000004 // Mask Transmit FIFO Empty #define MAC_IM_TXERM 0x00000002 // Mask Transmit Error #define MAC_IM_RXINTM 0x00000001 // Mask Packet Received //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_RCTL register. // //***************************************************************************** #define MAC_RCTL_RSTFIFO 0x00000010 // Clear Receive FIFO #define MAC_RCTL_BADCRC 0x00000008 // Enable Reject Bad CRC #define MAC_RCTL_PRMS 0x00000004 // Enable Promiscuous Mode #define MAC_RCTL_AMUL 0x00000002 // Enable Multicast Frames #define MAC_RCTL_RXEN 0x00000001 // Enable Receiver //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_TCTL register. // //***************************************************************************** #define MAC_TCTL_DUPLEX 0x00000010 // Enable Duplex Mode #define MAC_TCTL_CRC 0x00000004 // Enable CRC Generation #define MAC_TCTL_PADEN 0x00000002 // Enable Packet Padding #define MAC_TCTL_TXEN 0x00000001 // Enable Transmitter //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_DATA register. // //***************************************************************************** #define MAC_DATA_TXDATA_M 0xFFFFFFFF // Transmit FIFO Data #define MAC_DATA_RXDATA_M 0xFFFFFFFF // Receive FIFO Data #define MAC_DATA_RXDATA_S 0 #define MAC_DATA_TXDATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_IA0 register. // //***************************************************************************** #define MAC_IA0_MACOCT4_M 0xFF000000 // MAC Address Octet 4 #define MAC_IA0_MACOCT3_M 0x00FF0000 // MAC Address Octet 3 #define MAC_IA0_MACOCT2_M 0x0000FF00 // MAC Address Octet 2 #define MAC_IA0_MACOCT1_M 0x000000FF // MAC Address Octet 1 #define MAC_IA0_MACOCT4_S 24 #define MAC_IA0_MACOCT3_S 16 #define MAC_IA0_MACOCT2_S 8 #define MAC_IA0_MACOCT1_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_IA1 register. // //***************************************************************************** #define MAC_IA1_MACOCT6_M 0x0000FF00 // MAC Address Octet 6 #define MAC_IA1_MACOCT5_M 0x000000FF // MAC Address Octet 5 #define MAC_IA1_MACOCT6_S 8 #define MAC_IA1_MACOCT5_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_THR register. // //***************************************************************************** #define MAC_THR_THRESH_M 0x0000003F // Threshold Value #define MAC_THR_THRESH_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_MCTL register. // //***************************************************************************** #define MAC_MCTL_REGADR_M 0x000000F8 // MII Register Address #define MAC_MCTL_WRITE 0x00000002 // MII Register Transaction Type #define MAC_MCTL_START 0x00000001 // MII Register Transaction Enable #define MAC_MCTL_REGADR_S 3 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_MDV register. // //***************************************************************************** #define MAC_MDV_DIV_M 0x000000FF // Clock Divider #define MAC_MDV_DIV_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_MTXD register. // //***************************************************************************** #define MAC_MTXD_MDTX_M 0x0000FFFF // MII Register Transmit Data #define MAC_MTXD_MDTX_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_MRXD register. // //***************************************************************************** #define MAC_MRXD_MDRX_M 0x0000FFFF // MII Register Receive Data #define MAC_MRXD_MDRX_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_NP register. // //***************************************************************************** #define MAC_NP_NPR_M 0x0000003F // Number of Packets in Receive // FIFO #define MAC_NP_NPR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_TR register. // //***************************************************************************** #define MAC_TR_NEWTX 0x00000001 // New Transmission //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_TS register. // //***************************************************************************** #define MAC_TS_TSEN 0x00000001 // Time Stamp Enable //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_LED register. // //***************************************************************************** #define MAC_LED_LED1_M 0x00000F00 // LED1 Source #define MAC_LED_LED1_LINK 0x00000000 // Link OK #define MAC_LED_LED1_RXTX 0x00000100 // RX or TX Activity (Default LED1) #define MAC_LED_LED1_100 0x00000500 // 100BASE-TX mode #define MAC_LED_LED1_10 0x00000600 // 10BASE-T mode #define MAC_LED_LED1_DUPLEX 0x00000700 // Full-Duplex #define MAC_LED_LED1_LINKACT 0x00000800 // Link OK & Blink=RX or TX // Activity #define MAC_LED_LED0_M 0x0000000F // LED0 Source #define MAC_LED_LED0_LINK 0x00000000 // Link OK (Default LED0) #define MAC_LED_LED0_RXTX 0x00000001 // RX or TX Activity #define MAC_LED_LED0_100 0x00000005 // 100BASE-TX mode #define MAC_LED_LED0_10 0x00000006 // 10BASE-T mode #define MAC_LED_LED0_DUPLEX 0x00000007 // Full-Duplex #define MAC_LED_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX // Activity //***************************************************************************** // // The following are defines for the bit fields in the MAC_O_MDIX register. // //***************************************************************************** #define MAC_MDIX_EN 0x00000001 // MDI/MDI-X Enable //***************************************************************************** // // The following are defines for the Ethernet Controller PHY registers. // //***************************************************************************** #define PHY_MR0 0x00000000 // Ethernet PHY Management Register // 0 - Control #define PHY_MR1 0x00000001 // Ethernet PHY Management Register // 1 - Status #define PHY_MR2 0x00000002 // Ethernet PHY Management Register // 2 - PHY Identifier 1 #define PHY_MR3 0x00000003 // Ethernet PHY Management Register // 3 - PHY Identifier 2 #define PHY_MR4 0x00000004 // Ethernet PHY Management Register // 4 - Auto-Negotiation // Advertisement #define PHY_MR5 0x00000005 // Ethernet PHY Management Register // 5 - Auto-Negotiation Link // Partner Base Page Ability #define PHY_MR6 0x00000006 // Ethernet PHY Management Register // 6 - Auto-Negotiation Expansion #define PHY_MR16 0x00000010 // Ethernet PHY Management Register // 16 - Vendor-Specific #define PHY_MR17 0x00000011 // Ethernet PHY Management Register // 17 - Mode Control/Status #define PHY_MR18 0x00000012 // Ethernet PHY Management Register // 18 - Diagnostic #define PHY_MR19 0x00000013 // Ethernet PHY Management Register // 19 - Transceiver Control #define PHY_MR23 0x00000017 // Ethernet PHY Management Register // 23 - LED Configuration #define PHY_MR24 0x00000018 // Ethernet PHY Management Register // 24 -MDI/MDIX Control #define PHY_MR27 0x0000001B // Ethernet PHY Management Register // 27 - Special Control/Status #define PHY_MR29 0x0000001D // Ethernet PHY Management Register // 29 - Interrupt Status #define PHY_MR30 0x0000001E // Ethernet PHY Management Register // 30 - Interrupt Mask #define PHY_MR31 0x0000001F // Ethernet PHY Management Register // 31 - PHY Special Control/Status //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR0 register. // //***************************************************************************** #define PHY_MR0_RESET 0x00008000 // Reset Registers #define PHY_MR0_LOOPBK 0x00004000 // Loopback Mode #define PHY_MR0_SPEEDSL 0x00002000 // Speed Select #define PHY_MR0_ANEGEN 0x00001000 // Auto-Negotiation Enable #define PHY_MR0_PWRDN 0x00000800 // Power Down #define PHY_MR0_ISO 0x00000400 // Isolate #define PHY_MR0_RANEG 0x00000200 // Restart Auto-Negotiation #define PHY_MR0_DUPLEX 0x00000100 // Set Duplex Mode #define PHY_MR0_COLT 0x00000080 // Collision Test //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR1 register. // //***************************************************************************** #define PHY_MR1_100X_F 0x00004000 // 100BASE-TX Full-Duplex Mode #define PHY_MR1_100X_H 0x00002000 // 100BASE-TX Half-Duplex Mode #define PHY_MR1_10T_F 0x00001000 // 10BASE-T Full-Duplex Mode #define PHY_MR1_10T_H 0x00000800 // 10BASE-T Half-Duplex Mode #define PHY_MR1_MFPS 0x00000040 // Management Frames with Preamble // Suppressed #define PHY_MR1_ANEGC 0x00000020 // Auto-Negotiation Complete #define PHY_MR1_RFAULT 0x00000010 // Remote Fault #define PHY_MR1_ANEGA 0x00000008 // Auto-Negotiation #define PHY_MR1_LINK 0x00000004 // Link Made #define PHY_MR1_JAB 0x00000002 // Jabber Condition #define PHY_MR1_EXTD 0x00000001 // Extended Capabilities //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR2 register. // //***************************************************************************** #define PHY_MR2_OUI_M 0x0000FFFF // Organizationally Unique // Identifier[21:6] #define PHY_MR2_OUI_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR3 register. // //***************************************************************************** #define PHY_MR3_OUI_M 0x0000FC00 // Organizationally Unique // Identifier[5:0] #define PHY_MR3_MN_M 0x000003F0 // Model Number #define PHY_MR3_RN_M 0x0000000F // Revision Number #define PHY_MR3_OUI_S 10 #define PHY_MR3_MN_S 4 #define PHY_MR3_RN_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR4 register. // //***************************************************************************** #define PHY_MR4_NP 0x00008000 // Next Page #define PHY_MR4_RF 0x00002000 // Remote Fault #define PHY_MR4_A3 0x00000100 // Technology Ability Field [3] #define PHY_MR4_A2 0x00000080 // Technology Ability Field [2] #define PHY_MR4_A1 0x00000040 // Technology Ability Field [1] #define PHY_MR4_A0 0x00000020 // Technology Ability Field [0] #define PHY_MR4_S_M 0x0000001F // Selector Field #define PHY_MR4_S_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR5 register. // //***************************************************************************** #define PHY_MR5_NP 0x00008000 // Next Page #define PHY_MR5_ACK 0x00004000 // Acknowledge #define PHY_MR5_RF 0x00002000 // Remote Fault #define PHY_MR5_A_M 0x00001FE0 // Technology Ability Field #define PHY_MR5_S_M 0x0000001F // Selector Field #define PHY_MR5_S_8023 0x00000001 // IEEE Std 802.3 #define PHY_MR5_S_8029 0x00000002 // IEEE Std 802.9 ISLAN-16T #define PHY_MR5_S_8025 0x00000003 // IEEE Std 802.5 #define PHY_MR5_S_1394 0x00000004 // IEEE Std 1394 #define PHY_MR5_A_S 5 //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR6 register. // //***************************************************************************** #define PHY_MR6_PDF 0x00000010 // Parallel Detection Fault #define PHY_MR6_LPNPA 0x00000008 // Link Partner is Next Page Able #define PHY_MR6_PRX 0x00000002 // New Page Received #define PHY_MR6_LPANEGA 0x00000001 // Link Partner is Auto-Negotiation // Able //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR16 register. // //***************************************************************************** #define PHY_MR16_RPTR 0x00008000 // Repeater Mode #define PHY_MR16_INPOL 0x00004000 // Interrupt Polarity #define PHY_MR16_TXHIM 0x00001000 // Transmit High Impedance Mode #define PHY_MR16_SQEI 0x00000800 // SQE Inhibit Testing #define PHY_MR16_NL10 0x00000400 // Natural Loopback Mode #define PHY_MR16_SR_M 0x000003C0 // Silicon Revision Identifier #define PHY_MR16_APOL 0x00000020 // Auto-Polarity Disable #define PHY_MR16_RVSPOL 0x00000010 // Receive Data Polarity #define PHY_MR16_PCSBP 0x00000002 // PCS Bypass #define PHY_MR16_RXCC 0x00000001 // Receive Clock Control #define PHY_MR16_SR_S 6 //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR17 register. // //***************************************************************************** #define PHY_MR17_JABBER_IE 0x00008000 // Jabber Interrupt Enable #define PHY_MR17_FASTRIP 0x00004000 // 10-BASE-T Fast Mode Enable #define PHY_MR17_RXER_IE 0x00004000 // Receive Error Interrupt Enable #define PHY_MR17_EDPD 0x00002000 // Enable Energy Detect Power Down #define PHY_MR17_PRX_IE 0x00002000 // Page Received Interrupt Enable #define PHY_MR17_PDF_IE 0x00001000 // Parallel Detection Fault // Interrupt Enable #define PHY_MR17_LSQE 0x00000800 // Low Squelch Enable #define PHY_MR17_LPACK_IE 0x00000800 // LP Acknowledge Interrupt Enable #define PHY_MR17_LSCHG_IE 0x00000400 // Link Status Change Interrupt // Enable #define PHY_MR17_RFAULT_IE 0x00000200 // Remote Fault Interrupt Enable #define PHY_MR17_ANEGCOMP_IE 0x00000100 // Auto-Negotiation Complete // Interrupt Enable #define PHY_MR17_FASTEST 0x00000100 // Auto-Negotiation Test Mode #define PHY_MR17_JABBER_INT 0x00000080 // Jabber Event Interrupt #define PHY_MR17_RXER_INT 0x00000040 // Receive Error Interrupt #define PHY_MR17_PRX_INT 0x00000020 // Page Receive Interrupt #define PHY_MR17_PDF_INT 0x00000010 // Parallel Detection Fault // Interrupt #define PHY_MR17_LPACK_INT 0x00000008 // LP Acknowledge Interrupt #define PHY_MR17_LSCHG_INT 0x00000004 // Link Status Change Interrupt #define PHY_MR17_FGLS 0x00000004 // Force Good Link Status #define PHY_MR17_RFAULT_INT 0x00000002 // Remote Fault Interrupt #define PHY_MR17_ENON 0x00000002 // Energy On #define PHY_MR17_ANEGCOMP_INT 0x00000001 // Auto-Negotiation Complete // Interrupt //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR18 register. // //***************************************************************************** #define PHY_MR18_ANEGF 0x00001000 // Auto-Negotiation Failure #define PHY_MR18_DPLX 0x00000800 // Duplex Mode #define PHY_MR18_RATE 0x00000400 // Rate #define PHY_MR18_RXSD 0x00000200 // Receive Detection #define PHY_MR18_RX_LOCK 0x00000100 // Receive PLL Lock //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR19 register. // //***************************************************************************** #define PHY_MR19_TXO_M 0x0000C000 // Transmit Amplitude Selection #define PHY_MR19_TXO_00DB 0x00000000 // Gain set for 0.0dB of insertion // loss #define PHY_MR19_TXO_04DB 0x00004000 // Gain set for 0.4dB of insertion // loss #define PHY_MR19_TXO_08DB 0x00008000 // Gain set for 0.8dB of insertion // loss #define PHY_MR19_TXO_12DB 0x0000C000 // Gain set for 1.2dB of insertion // loss //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR23 register. // //***************************************************************************** #define PHY_MR23_LED1_M 0x000000F0 // LED1 Source #define PHY_MR23_LED1_LINK 0x00000000 // Link OK #define PHY_MR23_LED1_RXTX 0x00000010 // RX or TX Activity (Default LED1) #define PHY_MR23_LED1_100 0x00000050 // 100BASE-TX mode #define PHY_MR23_LED1_10 0x00000060 // 10BASE-T mode #define PHY_MR23_LED1_DUPLEX 0x00000070 // Full-Duplex #define PHY_MR23_LED1_LINKACT 0x00000080 // Link OK & Blink=RX or TX // Activity #define PHY_MR23_LED0_M 0x0000000F // LED0 Source #define PHY_MR23_LED0_LINK 0x00000000 // Link OK (Default LED0) #define PHY_MR23_LED0_RXTX 0x00000001 // RX or TX Activity #define PHY_MR23_LED0_100 0x00000005 // 100BASE-TX mode #define PHY_MR23_LED0_10 0x00000006 // 10BASE-T mode #define PHY_MR23_LED0_DUPLEX 0x00000007 // Full-Duplex #define PHY_MR23_LED0_LINKACT 0x00000008 // Link OK & Blink=RX or TX // Activity //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR24 register. // //***************************************************************************** #define PHY_MR24_PD_MODE 0x00000080 // Parallel Detection Mode #define PHY_MR24_AUTO_SW 0x00000040 // Auto-Switching Enable #define PHY_MR24_MDIX 0x00000020 // Auto-Switching Configuration #define PHY_MR24_MDIX_CM 0x00000010 // Auto-Switching Complete #define PHY_MR24_MDIX_SD_M 0x0000000F // Auto-Switching Seed #define PHY_MR24_MDIX_SD_S 0 //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR27 register. // //***************************************************************************** #define PHY_MR27_XPOL 0x00000010 // Polarity State of 10 BASE-T //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR29 register. // //***************************************************************************** #define PHY_MR29_EONIS 0x00000080 // ENERGYON Interrupt #define PHY_MR29_ANCOMPIS 0x00000040 // Auto-Negotiation Complete // Interrupt #define PHY_MR29_RFLTIS 0x00000020 // Remote Fault Interrupt #define PHY_MR29_LDIS 0x00000010 // Link Down Interrupt #define PHY_MR29_LPACKIS 0x00000008 // Auto-Negotiation LP Acknowledge #define PHY_MR29_PDFIS 0x00000004 // Parallel Detection Fault #define PHY_MR29_PRXIS 0x00000002 // Auto Negotiation Page Received //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR30 register. // //***************************************************************************** #define PHY_MR30_EONIM 0x00000080 // ENERGYON Interrupt Enabled #define PHY_MR30_ANCOMPIM 0x00000040 // Auto-Negotiation Complete // Interrupt Enabled #define PHY_MR30_RFLTIM 0x00000020 // Remote Fault Interrupt Enabled #define PHY_MR30_LDIM 0x00000010 // Link Down Interrupt Enabled #define PHY_MR30_LPACKIM 0x00000008 // Auto-Negotiation LP Acknowledge // Enabled #define PHY_MR30_PDFIM 0x00000004 // Parallel Detection Fault Enabled #define PHY_MR30_PRXIM 0x00000002 // Auto Negotiation Page Received // Enabled //***************************************************************************** // // The following are defines for the bit fields in the PHY_MR31 register. // //***************************************************************************** #define PHY_MR31_AUTODONE 0x00001000 // Auto Negotiation Done #define PHY_MR31_SPEED_M 0x0000001C // HCD Speed Value #define PHY_MR31_SPEED_10HD 0x00000004 // 10BASE-T half duplex #define PHY_MR31_SPEED_100HD 0x00000008 // 100BASE-T half duplex #define PHY_MR31_SPEED_10FD 0x00000014 // 10BASE-T full duplex #define PHY_MR31_SPEED_100FD 0x00000018 // 100BASE-T full duplex #define PHY_MR31_SCRDIS 0x00000001 // Scramble Disable //***************************************************************************** // // The following definitions are deprecated. // //***************************************************************************** #ifndef DEPRECATED //***************************************************************************** // // The following are deprecated defines for the Ethernet MAC register offsets. // //***************************************************************************** #define MAC_O_IS 0x00000000 // Interrupt Status Register //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_IS // register. // //***************************************************************************** #define MAC_IS_PHYINT 0x00000040 // PHY Interrupt #define MAC_IS_MDINT 0x00000020 // MDI Transaction Complete #define MAC_IS_RXER 0x00000010 // RX Error #define MAC_IS_FOV 0x00000008 // RX FIFO Overrun #define MAC_IS_TXEMP 0x00000004 // TX FIFO Empy #define MAC_IS_TXER 0x00000002 // TX Error #define MAC_IS_RXINT 0x00000001 // RX Packet Available //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_IA0 // register. // //***************************************************************************** #define MAC_IA0_MACOCT4 0xFF000000 // 4th Octet of MAC address #define MAC_IA0_MACOCT3 0x00FF0000 // 3rd Octet of MAC address #define MAC_IA0_MACOCT2 0x0000FF00 // 2nd Octet of MAC address #define MAC_IA0_MACOCT1 0x000000FF // 1st Octet of MAC address //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_IA1 // register. // //***************************************************************************** #define MAC_IA1_MACOCT6 0x0000FF00 // 6th Octet of MAC address #define MAC_IA1_MACOCT5 0x000000FF // 5th Octet of MAC address //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_THR // register. // //***************************************************************************** #define MAC_THR_THRESH 0x0000003F // Transmit Threshold Value //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_MCTL // register. // //***************************************************************************** #define MAC_MCTL_REGADR 0x000000F8 // Address for Next MII Transaction //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_MDV // register. // //***************************************************************************** #define MAC_MDV_DIV 0x000000FF // Clock Divider for MDC for TX //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_MTXD // register. // //***************************************************************************** #define MAC_MTXD_MDTX 0x0000FFFF // Data for Next MII Transaction //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_MRXD // register. // //***************************************************************************** #define MAC_MRXD_MDRX 0x0000FFFF // Data Read from Last MII Trans //***************************************************************************** // // The following are deprecated defines for the bit fields in the MAC_O_NP // register. // //***************************************************************************** #define MAC_NP_NPR 0x0000003F // Number of RX Frames in FIFO //***************************************************************************** // // The following are deprecated defines for the bit fields in the PHY_MR23 // register. // //***************************************************************************** #define PHY_MR23_LED1_TX 0x00000020 // TX Activity #define PHY_MR23_LED1_RX 0x00000030 // RX Activity #define PHY_MR23_LED1_COL 0x00000040 // Collision #define PHY_MR23_LED0_TX 0x00000002 // TX Activity #define PHY_MR23_LED0_RX 0x00000003 // RX Activity #define PHY_MR23_LED0_COL 0x00000004 // Collision //***************************************************************************** // // The following are deprecated defines for the reset values of the MAC // registers. // //***************************************************************************** #define MAC_RV_MDV 0x00000080 #define MAC_RV_IM 0x0000007F #define MAC_RV_THR 0x0000003F #define MAC_RV_RCTL 0x00000008 #define MAC_RV_IA0 0x00000000 #define MAC_RV_TCTL 0x00000000 #define MAC_RV_DATA 0x00000000 #define MAC_RV_MRXD 0x00000000 #define MAC_RV_TR 0x00000000 #define MAC_RV_IS 0x00000000 #define MAC_RV_NP 0x00000000 #define MAC_RV_MCTL 0x00000000 #define MAC_RV_MTXD 0x00000000 #define MAC_RV_IA1 0x00000000 #define MAC_RV_IACK 0x00000000 #define MAC_RV_MADD 0x00000000 #endif #endif // __HW_ETHERNET_H__