//***************************************************************************** // LPC5410x M0 Microcontroller Startup code for use with LPCXpresso IDE // // Version : 141022 //***************************************************************************** // // Copyright(C) NXP Semiconductors, 2014 // All rights reserved. // // Software that is described herein is for illustrative purposes only // which provides customers with programming information regarding the // LPC products. This software is supplied "AS IS" without any warranties of // any kind, and NXP Semiconductors and its licensor disclaim any and // all warranties, express or implied, including all implied warranties of // merchantability, fitness for a particular purpose and non-infringement of // intellectual property rights. NXP Semiconductors assumes no responsibility // or liability for the use of the software, conveys no license or rights under any // patent, copyright, mask work right, or any other intellectual property rights in // or to any products. NXP Semiconductors reserves the right to make changes // in the software without notification. NXP Semiconductors also makes no // representation or warranty that such application will be suitable for the // specified use without further testing or modification. // // Permission to use, copy, modify, and distribute this software and its // documentation is hereby granted, under NXP Semiconductors' and its // licensor's relevant copyrights in the software, without fee, provided that it // is used in conjunction with NXP Semiconductors microcontrollers. This // copyright, permission, and disclaimer notice must appear in all copies of // this code. //***************************************************************************** #if defined (__cplusplus) #ifdef __REDLIB__ #error Redlib does not support C++ #else //***************************************************************************** // // The entry point for the C++ library startup // //***************************************************************************** extern "C" { extern void __libc_init_array(void); } #endif #endif #define WEAK __attribute__ ((weak)) #define ALIAS(f) __attribute__ ((weak, alias (#f))) //***************************************************************************** #if defined (__cplusplus) extern "C" { #endif //***************************************************************************** #if defined (__USE_CMSIS) || defined (__USE_LPCOPEN) // Declaration of external SystemInit function extern void SystemInit(void); #endif //***************************************************************************** // // Forward declaration of the default handlers. These are aliased. // When the application defines a handler (with the same name), this will // automatically take precedence over these weak definitions // //***************************************************************************** void ResetISR(void); #if defined (__MULTICORE_MASTER) void ResetISR2(void); #endif WEAK void NMI_Handler(void); WEAK void HardFault_Handler(void); //WEAK void MemManage_Handler(void); //WEAK void BusFault_Handler(void); //WEAK void UsageFault_Handler(void); WEAK void SVC_Handler(void); //WEAK void DebugMon_Handler(void); WEAK void PendSV_Handler(void); WEAK void SysTick_Handler(void); WEAK void IntDefaultHandler(void); //***************************************************************************** // // Forward declaration of the specific IRQ handlers. These are aliased // to the IntDefaultHandler, which is a 'forever' loop. When the application // defines a handler (with the same name), this will automatically take // precedence over these weak definitions // //***************************************************************************** // External Interrupts - Available on M0/M4 void WDT_IRQHandler(void) ALIAS(IntDefaultHandler); void BOD_IRQHandler(void) ALIAS(IntDefaultHandler); void Reserved_IRQHandler(void) ALIAS(IntDefaultHandler); void DMA_IRQHandler(void) ALIAS(IntDefaultHandler); void GINT0_IRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT0_IRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT1_IRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT2_IRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT3_IRQHandler(void) ALIAS(IntDefaultHandler); void UTICK_IRQHandler(void) ALIAS(IntDefaultHandler); void MRT_IRQHandler(void) ALIAS(IntDefaultHandler); void CT32B0_IRQHandler(void) ALIAS(IntDefaultHandler); void CT32B1_IRQHandler(void) ALIAS(IntDefaultHandler); void CT32B2_IRQHandler(void) ALIAS(IntDefaultHandler); void CT32B3_IRQHandler(void) ALIAS(IntDefaultHandler); void CT32B4_IRQHandler(void) ALIAS(IntDefaultHandler); void SCT0_IRQHandler(void) ALIAS(IntDefaultHandler); void UART0_IRQHandler(void) ALIAS(IntDefaultHandler); void UART1_IRQHandler(void) ALIAS(IntDefaultHandler); void UART2_IRQHandler(void) ALIAS(IntDefaultHandler); void UART3_IRQHandler(void) ALIAS(IntDefaultHandler); void I2C0_IRQHandler(void) ALIAS(IntDefaultHandler); void I2C1_IRQHandler(void) ALIAS(IntDefaultHandler); void I2C2_IRQHandler(void) ALIAS(IntDefaultHandler); void SPI0_IRQHandler(void) ALIAS(IntDefaultHandler); void SPI1_IRQHandler(void) ALIAS(IntDefaultHandler); void ADC_SEQA_IRQHandler(void) ALIAS(IntDefaultHandler); void ADC_SEQB_IRQHandler(void) ALIAS(IntDefaultHandler); void ADC_THCMP_IRQHandler(void) ALIAS(IntDefaultHandler); void RTC_IRQHandler(void) ALIAS(IntDefaultHandler); void MAILBOX_IRQHandler(void) ALIAS(IntDefaultHandler); // External Interrupts - For M4 only //void GINT1_IRQHandler(void) ALIAS(IntDefaultHandler); //void PIN_INT4_IRQHandler(void) ALIAS(IntDefaultHandler); //void PIN_INT5_IRQHandler(void) ALIAS(IntDefaultHandler); //void PIN_INT6_IRQHandler(void) ALIAS(IntDefaultHandler); //void PIN_INT7_IRQHandler(void) ALIAS(IntDefaultHandler); //void SPI2_IRQHandler(void) ALIAS(IntDefaultHandler); //void SPI3_IRQHandler(void) ALIAS(IntDefaultHandler); //void RIT_IRQHandler(void) ALIAS(IntDefaultHandler); //void Reserved41_IRQHandler(void) ALIAS(IntDefaultHandler); //void Reserved42_IRQHandler(void) ALIAS(IntDefaultHandler); //void Reserved43_IRQHandler(void) ALIAS(IntDefaultHandler); //void Reserved44_IRQHandler(void) ALIAS(IntDefaultHandler); //***************************************************************************** // // The entry point for the application. // __main() is the entry point for Redlib based applications // main() is the entry point for Newlib based applications // //***************************************************************************** #if defined (__REDLIB__) extern void __main(void); #endif extern int main(void); //***************************************************************************** // // External declaration for the pointer to the stack top from the Linker Script // //***************************************************************************** extern void _vStackTop(void); //***************************************************************************** #if defined (__cplusplus) } // extern "C" #endif //***************************************************************************** // // The vector table. // This relies on the linker script to place at correct location in memory. // //***************************************************************************** extern void (* const g_pfnVectors[])(void); __attribute__ ((section(".isr_vector"))) void (* const g_pfnVectors[])(void) = { // Core Level - CM0plus &_vStackTop, // The initial stack pointer ResetISR, // The reset handler NMI_Handler, // The NMI handler HardFault_Handler, // The hard fault handler 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved SVC_Handler, // SVCall handler 0, // Reserved 0, // Reserved PendSV_Handler, // The PendSV handler SysTick_Handler, // The SysTick handler // External Interrupts - Available on M0/M4 WDT_IRQHandler, // Watchdog BOD_IRQHandler, // Brown Out Detect Reserved_IRQHandler, // Reserved DMA_IRQHandler, // DMA Controller GINT0_IRQHandler, // GPIO Group0 Interrupt PIN_INT0_IRQHandler, // PIO INT0 PIN_INT1_IRQHandler, // PIO INT1 PIN_INT2_IRQHandler, // PIO INT2 PIN_INT3_IRQHandler, // PIO INT3 UTICK_IRQHandler, // UTICK timer MRT_IRQHandler, // Multi-Rate Timer CT32B0_IRQHandler, // Counter Timer 0 CT32B1_IRQHandler, // Counter Timer 1 CT32B2_IRQHandler, // Counter Timer 2 CT32B3_IRQHandler, // Counter Timer 3 CT32B4_IRQHandler, // Counter Timer 4 SCT0_IRQHandler, // Smart Counter Timer UART0_IRQHandler, // UART0 UART1_IRQHandler, // UART1 UART2_IRQHandler, // UART2 UART3_IRQHandler, // UART3 I2C0_IRQHandler, // I2C0 controller I2C1_IRQHandler, // I2C1 controller I2C2_IRQHandler, // I2C2 controller SPI0_IRQHandler, // SPI0 controller SPI1_IRQHandler, // SPI1 controller ADC_SEQA_IRQHandler, // ADC SEQA ADC_SEQB_IRQHandler, // ADC SEQB ADC_THCMP_IRQHandler, // ADC THCMP and OVERRUN ORed RTC_IRQHandler, // RTC Timer Reserved_IRQHandler, // Reserved MAILBOX_IRQHandler, // Mailbox // External Interrupts - For M4 only // GINT1_IRQHandler, // GPIO Group1 Interrupt // PIN_INT4_IRQHandler, // PIO INT4 // PIN_INT5_IRQHandler, // PIO INT5 // PIN_INT6_IRQHandler, // PIO INT6 // PIN_INT7_IRQHandler, // PIO INT7 // SPI2_IRQHandler, // SPI2 controller // SPI3_IRQHandler, // SPI3 controller // 0, // Reserved // RIT_IRQHandler, // RIT Timer // Reserved41_IRQHandler, // Reserved // Reserved42_IRQHandler, // Reserved // Reserved43_IRQHandler, // Reserved // Reserved44_IRQHandler, // Reserved }; /* End of g_pfnVectors */ //***************************************************************************** // Functions to carry out the initialization of RW and BSS data sections. These // are written as separate functions rather than being inlined within the // ResetISR() function in order to cope with MCUs with multiple banks of // memory. //***************************************************************************** __attribute__ ((section(".after_vectors"))) void data_init(unsigned int romstart, unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int *pulSrc = (unsigned int*) romstart; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = *pulSrc++; } __attribute__ ((section(".after_vectors"))) void bss_init(unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = 0; } //***************************************************************************** // The following symbols are constructs generated by the linker, indicating // the location of various points in the "Global Section Table". This table is // created by the linker via the Code Red managed linker script mechanism. It // contains the load address, execution address and length of each RW data // section and the execution and length of each BSS (zero initialized) section. //***************************************************************************** extern unsigned int __data_section_table; extern unsigned int __data_section_table_end; extern unsigned int __bss_section_table; extern unsigned int __bss_section_table_end; //***************************************************************************** // Reset entry point for your code. // Sets up a simple runtime environment and initializes the C/C++ // library. //***************************************************************************** #if defined (__MULTICORE_MASTER) //#define cpu_ctrl 0x40000300 //#define coproc_boot 0x40000304 //#define set coproc_stack 0x40000308 __attribute__ ((naked, section(".after_vectors.reset"))) void ResetISR(void) { asm volatile( ".syntax unified\t\n" ".set cpu_ctrl, 0x40000300\t\n" ".set coproc_boot, 0x40000304\t\n" ".set coproc_stack, 0x40000308\t\n" "MOVS R5, #1\t\n" "LDR R0, =0xE000ED00\t\n" "LDR R1, [R0]\t\n" // READ CPUID register "LDR R2,=0x410CC601\t\n" // CM0 R0p1 identifier "EORS R1,R1,R2\t\n" // XOR to see if we are C0 "LDR R3, =cpu_ctrl\t\n" // get address of CPU_CTRL "LDR R1,[R3]\t\n" // read cpu_ctrl reg into R1 "BEQ.N cm0_boot\t\n" "cm4_boot:\t\n" "LDR R0,=coproc_boot\t\n" // coproc boot address "LDR R0,[R0]\t\n" // get address to branch to "MOVS R0,R0\t\n" // Check if 0 "BEQ.N check_master_m4\t\n" // if zero in boot reg, we just branch to real reset "BX R0\t\n" // otherwise, we branch to boot address "commonboot:\t\n" "LDR R0, =ResetISR2\t\n" // Jump to 'real' reset handler "BX R0\t\n" "cm0_boot:\t\n" "LDR R0,=coproc_boot\t\n" // coproc boot address "LDR R0,[R0]\t\n" // get address to branch to "MOVS R0,R0\t\n" // Check if 0 "BEQ.N check_master_m0\t\n" // if zero in boot reg, we just branch to real reset "LDR R1,=coproc_stack\t\n" // pickup coprocesor stackpointer (from syscon CPSTACK) "LDR R1,[R1]\t\n" "MOV SP,R1\t\n" "BX R0\t\n" // goto boot address "check_master_m0:\t\n" "ANDS R1,R1,R5\t\n" // bit test bit0 "BEQ.N commonboot\t\n" // if we get 0, that means we are masters "B.N goto_sleep_pending_reset\t\n" // Otherwise, there is no startup vector for slave, so we go to sleep "check_master_m4:\t\n" "ANDS R1,R1,R5\t\n" // bit test bit0 "BNE.N commonboot\t\n" // if we get 1, that means we are masters "goto_sleep_pending_reset:\t\n" "MOV SP,R5\t\n" // load 0x1 into SP so that any stacking (eg on NMI) will not cause us to wakeup // and write to uninitialised Stack area (instead it will LOCK us up before we cause damage) // this code should only be reached if debugger bypassed ROM or we changed master without giving // correct start address, the only way out of this is through a debugger change of SP and PC "sleepo:\t\n" "WFI\t\n" // go to sleep "B.N sleepo\t\n" ".syntax divided\t\n" ); } __attribute__ ((section(".after_vectors.reset"))) void ResetISR2(void) { #else __attribute__ ((section(".after_vectors.reset"))) void ResetISR(void) { #endif // If this is not the CM0+ core... #if !defined (CORE_M0PLUS) // If this is not a slave project... #if !defined (__MULTICORE_M0SLAVE) && \ !defined (__MULTICORE_M4SLAVE) // Optionally enable RAM banks that may be off by default at reset #if !defined (DONT_ENABLE_DISABLED_RAMBANKS) volatile unsigned int *SYSCON_SYSAHBCLKCTRL0 = (unsigned int *) 0x400000c0; // Ensure that SRAM2(4) bit in SYSAHBCLKCTRL0 are set *SYSCON_SYSAHBCLKCTRL0 |= (1 << 4); #endif #endif #endif // // Copy the data sections from flash to SRAM. // unsigned int LoadAddr, ExeAddr, SectionLen; unsigned int *SectionTableAddr; // Load base address of Global Section Table SectionTableAddr = &__data_section_table; // Copy the data sections from flash to SRAM. while (SectionTableAddr < &__data_section_table_end) { LoadAddr = *SectionTableAddr++; ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; data_init(LoadAddr, ExeAddr, SectionLen); } // At this point, SectionTableAddr = &__bss_section_table; // Zero fill the bss segment while (SectionTableAddr < &__bss_section_table_end) { ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; bss_init(ExeAddr, SectionLen); } #if !defined (__USE_LPCOPEN) // LPCOpen init code deals with VTOR initialisation unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08; if ((unsigned int *) g_pfnVectors != (unsigned int *) 0x00000000) { // CMSIS : SCB->VTOR =
*pSCB_VTOR = (unsigned int) g_pfnVectors; } #endif #if defined (__USE_CMSIS) || defined (__USE_LPCOPEN) SystemInit(); #endif #if defined (__cplusplus) // // Call C++ library initialisation // __libc_init_array(); #endif #if defined (__REDLIB__) // Call the Redlib library, which in turn calls main() __main(); #else main(); #endif // // main() shouldn't return, but if it does, we'll just enter an infinite loop // while (1) { ; } } //***************************************************************************** // Default exception handlers. Override the ones here by defining your own // handler routines in your application code. //***************************************************************************** __attribute__ ((section(".after_vectors"))) void NMI_Handler(void) { while(1) {} } __attribute__ ((section(".after_vectors"))) void HardFault_Handler(void) { while(1) {} } __attribute__ ((section(".after_vectors"))) void SVC_Handler(void) { while(1) {} } __attribute__ ((section(".after_vectors"))) void PendSV_Handler(void) { while(1) {} } __attribute__ ((section(".after_vectors"))) void SysTick_Handler(void) { while(1) {} } //***************************************************************************** // // Processor ends up here if an unexpected interrupt occurs or a specific // handler is not present in the application code. // //***************************************************************************** __attribute__ ((section(".after_vectors"))) void IntDefaultHandler(void) { while(1) {} }