/* * Copyright (c) 2021-2023 HPMicro * * SPDX-License-Identifier: BSD-3-Clause * */ #ifndef _HPM_BOARD_H #define _HPM_BOARD_H #include #include "hpm_common.h" #include "hpm_soc.h" #include "hpm_soc_feature.h" #include "hpm_clock_drv.h" #include "pinmux.h" #include "hpm_lcdc_drv.h" #ifdef CONFIG_HPM_PANEL #include "hpm_panel.h" #endif #if !defined(CONFIG_NDEBUG_CONSOLE) || !CONFIG_NDEBUG_CONSOLE #include "hpm_debug_console.h" #endif #define BOARD_NAME "hpm6750evkmini" #define BOARD_UF2_SIGNATURE (0x0A4D5048UL) #define SEC_CORE_IMG_START ILM_LOCAL_BASE #ifndef BOARD_RUNNING_CORE #define BOARD_RUNNING_CORE HPM_CORE0 #endif /* uart section */ #ifndef BOARD_APP_UART_BASE #define BOARD_APP_UART_BASE HPM_UART13 #define BOARD_APP_UART_IRQ IRQn_UART13 #define BOARD_APP_UART_BAUDRATE (115200UL) #define BOARD_APP_UART_CLK_NAME clock_uart13 #define BOARD_APP_UART_RX_DMA_REQ HPM_DMA_SRC_UART13_RX #define BOARD_APP_UART_TX_DMA_REQ HPM_DMA_SRC_UART13_TX #endif /* uart rx idle demo section */ #define BOARD_UART_IDLE BOARD_APP_UART_BASE #define BOARD_UART_IDLE_IRQ BOARD_APP_UART_IRQ #define BOARD_UART_IDLE_CLK_NAME BOARD_APP_UART_CLK_NAME #define BOARD_UART_IDLE_TX_DMA_SRC BOARD_APP_UART_TX_DMA_REQ #define BOARD_UART_IDLE_DMA_SRC BOARD_APP_UART_RX_DMA_REQ #define BOARD_UART_IDLE_TRGM HPM_TRGM2 #define BOARD_UART_IDLE_TRGM_PIN IOC_PAD_PD19 #define BOARD_UART_IDLE_TRGM_INPUT_SRC HPM_TRGM2_INPUT_SRC_TRGM2_P9 #define BOARD_UART_IDLE_TRGM_OUTPUT_GPTMR_IN HPM_TRGM2_OUTPUT_SRC_GPTMR4_IN2 #define BOARD_UART_IDLE_TRGM_OUTPUT_GPTMR_SYNCI HPM_TRGM2_OUTPUT_SRC_GPTMR4_SYNCI #define BOARD_UART_IDLE_GPTMR HPM_GPTMR4 #define BOARD_UART_IDLE_GPTMR_CLK_NAME clock_gptmr4 #define BOARD_UART_IDLE_GPTMR_IRQ IRQn_GPTMR4 #define BOARD_UART_IDLE_GPTMR_CMP_CH 0 #define BOARD_UART_IDLE_GPTMR_CAP_CH 2 /* uart microros sample section */ #define BOARD_MICROROS_UART_BASE BOARD_APP_UART_BASE #define BOARD_MICROROS_UART_IRQ BOARD_APP_UART_IRQ #define BOARD_MICROROS_UART_CLK_NAME BOARD_APP_UART_CLK_NAME /* rtthread-nano finsh section */ #define BOARD_RT_CONSOLE_BASE BOARD_CONSOLE_UART_BASE /* usb cdc acm uart section */ #define BOARD_USB_CDC_ACM_UART BOARD_APP_UART_BASE #define BOARD_USB_CDC_ACM_UART_CLK_NAME BOARD_APP_UART_CLK_NAME #define BOARD_USB_CDC_ACM_UART_TX_DMA_SRC BOARD_APP_UART_TX_DMA_REQ #define BOARD_USB_CDC_ACM_UART_RX_DMA_SRC BOARD_APP_UART_RX_DMA_REQ /* modbus sample section */ #define BOARD_MODBUS_UART_BASE BOARD_APP_UART_BASE #define BOARD_MODBUS_UART_CLK_NAME BOARD_APP_UART_CLK_NAME #define BOARD_MODBUS_UART_RX_DMA_REQ BOARD_APP_UART_RX_DMA_REQ #define BOARD_MODBUS_UART_TX_DMA_REQ BOARD_APP_UART_TX_DMA_REQ /* uart lin sample section */ #define BOARD_UART_LIN BOARD_APP_UART_BASE #define BOARD_UART_LIN_IRQ BOARD_APP_UART_IRQ #define BOARD_UART_LIN_CLK_NAME BOARD_APP_UART_CLK_NAME #define BOARD_UART_LIN_TX_PORT GPIO_DI_GPIOZ #define BOARD_UART_LIN_TX_PIN (9U) /* PC03 should align with used pin in pinmux configuration */ #if !defined(CONFIG_NDEBUG_CONSOLE) || !CONFIG_NDEBUG_CONSOLE #ifndef BOARD_CONSOLE_TYPE #define BOARD_CONSOLE_TYPE CONSOLE_TYPE_UART #endif #if BOARD_CONSOLE_TYPE == CONSOLE_TYPE_UART #ifndef BOARD_CONSOLE_UART_BASE #if BOARD_RUNNING_CORE == HPM_CORE0 #define BOARD_CONSOLE_UART_BASE HPM_UART0 #define BOARD_CONSOLE_UART_CLK_NAME clock_uart0 #define BOARD_CONSOLE_UART_IRQ IRQn_UART0 #define BOARD_CONSOLE_UART_TX_DMA_REQ HPM_DMA_SRC_UART0_TX #define BOARD_CONSOLE_UART_RX_DMA_REQ HPM_DMA_SRC_UART0_RX #else #define BOARD_CONSOLE_UART_BASE HPM_UART13 #define BOARD_CONSOLE_UART_CLK_NAME clock_uart13 #define BOARD_CONSOLE_UART_IRQ IRQn_UART13 #define BOARD_CONSOLE_UART_TX_DMA_REQ HPM_DMA_SRC_UART13_TX #define BOARD_CONSOLE_UART_RX_DMA_REQ HPM_DMA_SRC_UART13_RX #endif #endif #define BOARD_CONSOLE_UART_BAUDRATE (115200UL) #endif #endif /* sdram section */ #define BOARD_SDRAM_ADDRESS (0x40000000UL) #define BOARD_SDRAM_SIZE (16 * SIZE_1MB) #define BOARD_SDRAM_CS FEMC_SDRAM_CS0 #define BOARD_SDRAM_PORT_SIZE FEMC_SDRAM_PORT_SIZE_16_BITS #define BOARD_SDRAM_REFRESH_COUNT (4096UL) #define BOARD_SDRAM_REFRESH_IN_MS (64UL) #define BOARD_SDRAM_DATA_WIDTH_IN_BYTE (2UL) #define BOARD_FEMC_DQS_FLOATING 1 /* lcd section */ #define BOARD_LCD_BASE HPM_LCDC #define BOARD_LCD_IRQ IRQn_LCDC_D0 #define BOARD_LCD_POWER_GPIO_BASE HPM_GPIO0 #define BOARD_LCD_POWER_GPIO_INDEX GPIO_DO_GPIOB #define BOARD_LCD_POWER_GPIO_PIN 12 #define BOARD_LCD_BACKLIGHT_GPIO_BASE HPM_GPIO0 #define BOARD_LCD_BACKLIGHT_GPIO_INDEX GPIO_DO_GPIOB #define BOARD_LCD_BACKLIGHT_GPIO_PIN 23 /* i2c section */ #define BOARD_APP_I2C_BASE HPM_I2C0 #define BOARD_APP_I2C_IRQ IRQn_I2C0 #define BOARD_APP_I2C_IRQ IRQn_I2C0 #define BOARD_APP_I2C_CLK_NAME clock_i2c0 #define BOARD_APP_I2C_DMA HPM_HDMA #define BOARD_APP_I2C_DMAMUX HPM_DMAMUX #define BOARD_APP_I2C_DMA_SRC HPM_DMA_SRC_I2C0 #define BOARD_CAM_I2C_BASE HPM_I2C0 #define BOARD_CAM_I2C_CLK_NAME clock_i2c0 #define BOARD_CAP_I2C_BASE (HPM_I2C0) #define BOARD_CAP_I2C_CLK_NAME clock_i2c0 #define BOARD_CAP_RST_GPIO (HPM_GPIO0) #define BOARD_CAP_RST_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_RST_GPIO_PIN (9) #define BOARD_CAP_RST_GPIO_IRQ (IRQn_GPIO0_B) #define BOARD_CAP_INTR_GPIO (HPM_GPIO0) #define BOARD_CAP_INTR_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_INTR_GPIO_PIN (8) #define BOARD_CAP_INTR_GPIO_IRQ (IRQn_GPIO0_B) #define BOARD_CAP_I2C_SDA_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_I2C_SDA_GPIO_PIN (10) #define BOARD_CAP_I2C_CLK_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_I2C_CLK_GPIO_PIN (11) /* ACMP desction */ #define BOARD_ACMP HPM_ACMP #define BOARD_ACMP_CHANNEL ACMP_CHANNEL_CHN1 #define BOARD_ACMP_IRQ IRQn_ACMP_1 #define BOARD_ACMP_PLUS_INPUT ACMP_INPUT_DAC_OUT /* use internal DAC */ #define BOARD_ACMP_MINUS_INPUT ACMP_INPUT_ANALOG_6 /* align with used pin */ /* dma section */ #define BOARD_APP_XDMA HPM_XDMA #define BOARD_APP_HDMA HPM_HDMA #define BOARD_APP_XDMA_IRQ IRQn_XDMA #define BOARD_APP_HDMA_IRQ IRQn_HDMA #define BOARD_APP_DMAMUX HPM_DMAMUX /* gptmr section */ #define BOARD_GPTMR HPM_GPTMR5 #define BOARD_GPTMR_IRQ IRQn_GPTMR5 #define BOARD_GPTMR_CHANNEL 1 #define BOARD_GPTMR_DMA_SRC HPM_DMA_SRC_GPTMR5_1 #define BOARD_GPTMR_CLK_NAME clock_gptmr5 #define BOARD_GPTMR_PWM HPM_GPTMR5 #define BOARD_GPTMR_PWM_DMA_SRC HPM_DMA_SRC_GPTMR5_1 #define BOARD_GPTMR_PWM_CHANNEL 1 #define BOARD_GPTMR_PWM_CLK_NAME clock_gptmr5 #define BOARD_GPTMR_PWM_IRQ IRQn_GPTMR5 #define BOARD_GPTMR_PWM_SYNC HPM_GPTMR5 #define BOARD_GPTMR_PWM_SYNC_CHANNEL 0 #define BOARD_GPTMR_PWM_SYNC_CLK_NAME clock_gptmr5 /* gpio section */ #define BOARD_R_GPIO_CTRL HPM_GPIO0 #define BOARD_R_GPIO_INDEX GPIO_DI_GPIOB #define BOARD_R_GPIO_PIN 19 #define BOARD_G_GPIO_CTRL HPM_GPIO0 #define BOARD_G_GPIO_INDEX GPIO_DI_GPIOB #define BOARD_G_GPIO_PIN 18 #define BOARD_B_GPIO_CTRL HPM_GPIO0 #define BOARD_B_GPIO_INDEX GPIO_DI_GPIOB #define BOARD_B_GPIO_PIN 20 #define BOARD_LED_GPIO_CTRL BOARD_G_GPIO_CTRL #define BOARD_LED_GPIO_INDEX BOARD_G_GPIO_INDEX #define BOARD_LED_GPIO_PIN BOARD_G_GPIO_PIN /* *led Internal pull-up and pull-down resistance direction *The configurations of Rev-A / B boards are different */ #define BOARD_LED_OFF_LEVEL 1 #define BOARD_LED_ON_LEVEL 0 #define BOARD_APP_GPIO_INDEX GPIO_DI_GPIOZ #define BOARD_APP_GPIO_PIN 2 /* pinmux section */ #define USING_GPIO0_FOR_GPIOZ #ifndef USING_GPIO0_FOR_GPIOZ #define BOARD_APP_GPIO_CTRL HPM_BGPIO #define BOARD_APP_GPIO_IRQ IRQn_BGPIO #else #define BOARD_APP_GPIO_CTRL HPM_GPIO0 #define BOARD_APP_GPIO_IRQ IRQn_GPIO0_Z #endif /* gpiom section */ #define BOARD_APP_GPIOM_BASE HPM_GPIOM #define BOARD_APP_GPIOM_USING_CTRL HPM_FGPIO #define BOARD_APP_GPIOM_USING_CTRL_NAME gpiom_core0_fast /* spi section */ #define BOARD_APP_SPI_BASE HPM_SPI2 #define BOARD_APP_SPI_CLK_NAME clock_spi2 #define BOARD_APP_SPI_IRQ IRQn_SPI2 #define BOARD_APP_SPI_SCLK_FREQ (20000000UL) #define BOARD_APP_SPI_ADDR_LEN_IN_BYTES (1U) #define BOARD_APP_SPI_DATA_LEN_IN_BITS (8U) #define BOARD_APP_SPI_RX_DMA HPM_DMA_SRC_SPI2_RX #define BOARD_APP_SPI_TX_DMA HPM_DMA_SRC_SPI2_TX #define BOARD_SPI_CS_GPIO_CTRL HPM_GPIO0 #define BOARD_SPI_CS_PIN IOC_PAD_PB24 #define BOARD_SPI_CS_ACTIVE_LEVEL (0U) /* Flash section */ #define BOARD_APP_XPI_NOR_XPI_BASE (HPM_XPI0) #define BOARD_APP_XPI_NOR_CFG_OPT_HDR (0xfcf90001U) #define BOARD_APP_XPI_NOR_CFG_OPT_OPT0 (0x00000007U) #define BOARD_APP_XPI_NOR_CFG_OPT_OPT1 (0x00000000U) #define BOARD_FLASH_BASE_ADDRESS (0x80000000UL) #define BOARD_FLASH_SIZE (8 << 20) /* lcd section */ #ifndef BOARD_LCD_WIDTH #define BOARD_LCD_WIDTH PANEL_SIZE_WIDTH #endif #ifndef BOARD_LCD_HEIGHT #define BOARD_LCD_HEIGHT PANEL_SIZE_HEIGHT #endif /* pdma section */ #define BOARD_PDMA_BASE HPM_PDMA /* i2s section */ #define BOARD_APP_I2S_CLK_NAME clock_i2s1 #define BOARD_APP_AUDIO_CLK_SRC clock_source_pll3_clk0 #define BOARD_APP_AUDIO_CLK_SRC_NAME clk_pll3clk0 #define BOARD_PDM_SINGLE_CHANNEL_MASK (1U) #define BOARD_PDM_DUAL_CHANNEL_MASK (0x11U) /* enet section */ #define BOARD_ENET_PPS HPM_ENET0 #define BOARD_ENET_PPS_IDX enet_pps_0 #define BOARD_ENET_PPS_PTP_CLOCK clock_ptp0 #define BOARD_ENET_RMII_RST_GPIO HPM_GPIO0 #define BOARD_ENET_RMII_RST_GPIO_INDEX GPIO_DO_GPIOD #define BOARD_ENET_RMII_RST_GPIO_PIN (15U) #define BOARD_ENET_RMII HPM_ENET1 #define BOARD_ENET_RMII_INT_REF_CLK (0U) #define BOARD_ENET_RMII_PTP_CLOCK clock_ptp1 #define BOARD_ENET1_RST_GPIO HPM_GPIO0 #define BOARD_ENET1_RST_GPIO_INDEX GPIO_DO_GPIOE #define BOARD_ENET1_RST_GPIO_PIN (26U) #define BOARD_ENET0_INF (0U) /* 0: RMII, 1: RGMII */ #define BOARD_ENET0_INT_REF_CLK (0U) #define BOARD_ENET0_PHY_RST_TIME (30) #if BOARD_ENET0_INF #define BOARD_ENET0_TX_DLY (0U) #define BOARD_ENET0_RX_DLY (0U) #endif #if __USE_ENET_PTP #define BOARD_ENET0_PTP_CLOCK (clock_ptp0) #endif #define BOARD_ENET1_INF (0U) /* 0: RMII, 1: RGMII */ #define BOARD_ENET1_INT_REF_CLK (0U) #define BOARD_ENET1_PHY_RST_TIME (30) #if BOARD_ENET1_INF #define BOARD_ENET1_TX_DLY (0U) #define BOARD_ENET1_RX_DLY (0U) #endif #if __USE_ENET_PTP #define BOARD_ENET1_PTP_CLOCK (clock_ptp1) #endif /* ADC section */ #define BOARD_APP_ADC12_NAME "ADC0" #define BOARD_APP_ADC12_BASE HPM_ADC0 #define BOARD_APP_ADC12_IRQn IRQn_ADC0 #define BOARD_APP_ADC12_CH_1 (14U) #define BOARD_APP_ADC12_CLK_NAME (clock_adc0) #define BOARD_APP_ADC16_NAME "ADC3" #define BOARD_APP_ADC16_IRQn IRQn_ADC3 #define BOARD_APP_ADC16_BASE HPM_ADC3 #define BOARD_APP_ADC16_CH_1 (2U) #define BOARD_APP_ADC16_CLK_NAME (clock_adc3) #define BOARD_APP_ADC12_HW_TRIG_SRC HPM_PWM0 #define BOARD_APP_ADC12_HW_TRGM HPM_TRGM0 #define BOARD_APP_ADC12_HW_TRGM_IN HPM_TRGM0_INPUT_SRC_PWM0_CH8REF #define BOARD_APP_ADC12_HW_TRGM_OUT_SEQ TRGM_TRGOCFG_ADC0_STRGI #define BOARD_APP_ADC12_HW_TRGM_OUT_PMT TRGM_TRGOCFG_ADCX_PTRGI0A #define BOARD_APP_ADC16_HW_TRIG_SRC HPM_PWM0 #define BOARD_APP_ADC16_HW_TRGM HPM_TRGM0 #define BOARD_APP_ADC16_HW_TRGM_IN HPM_TRGM0_INPUT_SRC_PWM0_CH8REF #define BOARD_APP_ADC16_HW_TRGM_OUT_SEQ TRGM_TRGOCFG_ADC3_STRGI #define BOARD_APP_ADC16_HW_TRGM_OUT_PMT TRGM_TRGOCFG_ADCX_PTRGI0A #define BOARD_APP_ADC12_PMT_TRIG_CH ADC12_CONFIG_TRG0A #define BOARD_APP_ADC16_PMT_TRIG_CH ADC16_CONFIG_TRG0A /* CAN section */ #define BOARD_APP_CAN_BASE HPM_CAN1 #define BOARD_APP_CAN_IRQn IRQn_CAN1 /* * timer for board delay */ #define BOARD_DELAY_TIMER (HPM_GPTMR7) #define BOARD_DELAY_TIMER_CH 0 #define BOARD_DELAY_TIMER_CLK_NAME (clock_gptmr7) #define BOARD_CALLBACK_TIMER (HPM_GPTMR7) #define BOARD_CALLBACK_TIMER_CH 1 #define BOARD_CALLBACK_TIMER_IRQ IRQn_GPTMR7 #define BOARD_CALLBACK_TIMER_CLK_NAME (clock_gptmr7) /* timer for 1ms*/ #define BOARD_TMR_1MS HPM_GPTMR2 #define BOARD_TMR_1MS_CH 0 #define BOARD_TMR_1MS_CMP 0 #define BOARD_TMR_1MS_IRQ IRQn_GPTMR2 #define BOARD_TMR_1MS_RELOAD (100000U) /* SDXC section */ #define BOARD_APP_SDCARD_SDXC_BASE (HPM_SDXC1) #define BOARD_APP_SDCARD_SUPPORT_3V3 (1) #define BOARD_APP_SDCARD_SUPPORT_1V8 (1) #define BOARD_APP_SDCARD_SUPPORT_4BIT (1) #define BOARD_APP_SDCARD_SUPPORT_CARD_DETECTION (1) #define BOARD_APP_SDCARD_SUPPORT_POWER_SWITCH (0) #define BOARD_APP_SDCARD_SUPPORT_VOLTAGE_SWITCH (1) #define BOARD_APP_SDCARD_SUPPORT_CARD_DETECTION (1) #define BOARD_APP_SDCARD_CARD_DETECTION_USING_GPIO (0) #if defined(BOARD_APP_SDCARD_CARD_DETECTION_USING_GPIO) && (BOARD_APP_SDCARD_CARD_DETECTION_USING_GPIO == 1) #define BOARD_APP_SDCARD_CARD_DETECTION_GPIO NULL #define BOARD_APP_SDCARD_CARD_DETECTION_GPIO_INDEX 0 #define BOARD_APP_SDCARD_CARD_DETECTION_PIN_INDEX 0 #endif #define BOARD_APP_EMMC_SDXC_BASE (HPM_SDXC1) #define BOARD_APP_EMMC_SUPPORT_3V3 (1) #define BOARD_APP_EMMC_SUPPORT_1V8 (0) #define BOARD_APP_EMMC_SUPPORT_4BIT (1) #define BOARD_APP_EMMC_SUPPORT_8BIT (0) #define BOARD_APP_EMMC_SUPPORT_VOLTAGE_SWITCH (0) /* For eMMC device, it is recommended to use GPIO to switch voltage directly */ #define BOARD_APP_EMMC_VOLTAGE_SWITCH_USING_GPIO (1) #if defined(BOARD_APP_EMMC_VOLTAGE_SWITCH_USING_GPIO) && (BOARD_APP_EMMC_VOLTAGE_SWITCH_USING_GPIO == 1) #define BOARD_APP_EMMC_VSEL_PIN IOC_PAD_PD29 #endif /* USB section */ #define BOARD_USB0_ID_PORT (HPM_GPIO0) #define BOARD_USB0_ID_GPIO_INDEX (GPIO_DO_GPIOF) #define BOARD_USB0_ID_GPIO_PIN (10) #define BOARD_USB0_OC_PORT (HPM_GPIO0) #define BOARD_USB0_OC_GPIO_INDEX (GPIO_DI_GPIOF) #define BOARD_USB0_OC_GPIO_PIN (8) /* APP PWM */ #define BOARD_APP_PWM HPM_PWM0 #define BOARD_APP_PWM_CLOCK_NAME clock_mot0 #define BOARD_APP_PWM_OUT1 4 #define BOARD_APP_PWM_OUT2 5 #define BOARD_APP_TRGM HPM_TRGM0 #define BOARD_APP_PWM_IRQ IRQn_PWM0 #define BOARD_APP_TRGM_PWM_OUTPUT TRGM_TRGOCFG_PWM_SYNCI /* RGB LED Section */ #define BOARD_RED_PWM_IRQ IRQn_PWM1 #define BOARD_RED_PWM HPM_PWM1 #define BOARD_RED_PWM_OUT 0 #define BOARD_RED_PWM_CMP 0 #define BOARD_RED_PWM_CMP_INITIAL_ZERO true #define BOARD_RED_PWM_CLOCK_NAME clock_mot1 #define BOARD_GREEN_PWM_IRQ IRQn_PWM1 #define BOARD_GREEN_PWM HPM_PWM1 #define BOARD_GREEN_PWM_OUT 1 #define BOARD_GREEN_PWM_CMP 1 #define BOARD_GREEN_PWM_CMP_INITIAL_ZERO true #define BOARD_GREEN_PWM_CLOCK_NAME clock_mot1 #define BOARD_BLUE_PWM_IRQ IRQn_PWM0 #define BOARD_BLUE_PWM HPM_PWM0 #define BOARD_BLUE_PWM_OUT 7 #define BOARD_BLUE_PWM_CMP 7 #define BOARD_BLUE_PWM_CMP_INITIAL_ZERO true #define BOARD_BLUE_PWM_CLOCK_NAME clock_mot0 #define BOARD_RGB_RED 0 #define BOARD_RGB_GREEN (BOARD_RGB_RED + 1) #define BOARD_RGB_BLUE (BOARD_RGB_RED + 2) /* Beep Section */ #define BOARD_BEEP_PWM HPM_PWM3 #define BOARD_BEEP_PWM_OUT 4 #define BOARD_BEEP_PWM_CLOCK_NAME clock_mot3 /*BLDC pwm*/ /*PWM define*/ #define BOARD_BLDCPWM HPM_PWM1 #define BOARD_BLDC_UH_PWM_OUTPIN (2U) #define BOARD_BLDC_UL_PWM_OUTPIN (3U) #define BOARD_BLDC_VH_PWM_OUTPIN (4U) #define BOARD_BLDC_VL_PWM_OUTPIN (5U) #define BOARD_BLDC_WH_PWM_OUTPIN (6U) #define BOARD_BLDC_WL_PWM_OUTPIN (7U) #define BOARD_BLDCPWM_TRGM HPM_TRGM1 #define BOARD_BLDCAPP_PWM_IRQ IRQn_PWM1 #define BOARD_BLDCPWM_CMP_INDEX_0 (0U) #define BOARD_BLDCPWM_CMP_INDEX_1 (1U) #define BOARD_BLDCPWM_CMP_INDEX_2 (2U) #define BOARD_BLDCPWM_CMP_INDEX_3 (3U) #define BOARD_BLDCPWM_CMP_INDEX_4 (4U) #define BOARD_BLDCPWM_CMP_INDEX_5 (5U) #define BOARD_BLDCPWM_CMP_INDEX_6 (6U) #define BOARD_BLDCPWM_CMP_INDEX_7 (7U) #define BOARD_BLDCPWM_CMP_TRIG_CMP (20U) /*HALL define*/ #define BOARD_BLDC_HALL_BASE HPM_HALL2 #define BOARD_BLDC_HALL_TRGM HPM_TRGM2 #define BOARD_BLDC_HALL_IRQ IRQn_HALL2 #define BOARD_BLDC_HALL_TRGM_HALL_U_SRC HPM_TRGM2_INPUT_SRC_TRGM2_P9 #define BOARD_BLDC_HALL_TRGM_HALL_V_SRC HPM_TRGM2_INPUT_SRC_TRGM2_P10 #define BOARD_BLDC_HALL_TRGM_HALL_W_SRC HPM_TRGM2_INPUT_SRC_TRGM2_P11 #define BOARD_BLDC_HALL_MOTOR_PHASE_COUNT_PER_REV (1000U) /*QEI*/ #define BOARD_BLDC_QEI_BASE HPM_QEI2 #define BOARD_BLDC_QEI_IRQ IRQn_QEI2 #define BOARD_BLDC_QEI_TRGM HPM_TRGM2 #define BOARD_BLDC_QEI_TRGM_QEI_A_SRC HPM_TRGM2_INPUT_SRC_TRGM2_P6 #define BOARD_BLDC_QEI_TRGM_QEI_B_SRC HPM_TRGM2_INPUT_SRC_TRGM2_P7 #define BOARD_BLDC_QEI_MOTOR_PHASE_COUNT_PER_REV (16U) #define BOARD_BLDC_QEI_CLOCK_SOURCE clock_mot2 #define BOARD_BLDC_QEI_FOC_PHASE_COUNT_PER_REV (4000U) /*Timer define*/ #define BOARD_TMR_1MS HPM_GPTMR2 #define BOARD_TMR_1MS_CH 0 #define BOARD_TMR_1MS_CMP 0 #define BOARD_TMR_1MS_IRQ IRQn_GPTMR2 #define BOARD_TMR_1MS_RELOAD (100000U) #define BOARD_BLDC_TMR_1MS BOARD_TMR_1MS #define BOARD_BLDC_TMR_CH BOARD_TMR_1MS_CH #define BOARD_BLDC_TMR_CMP BOARD_TMR_1MS_CMP #define BOARD_BLDC_TMR_IRQ BOARD_TMR_1MS_IRQ #define BOARD_BLDC_TMR_RELOAD BOARD_TMR_1MS_RELOAD /*adc*/ #define BOARD_BLDC_ADC_MODULE ADCX_MODULE_ADC12 #define BOARD_BLDC_ADC_U_BASE HPM_ADC0 #define BOARD_BLDC_ADC_V_BASE HPM_ADC1 #define BOARD_BLDC_ADC_W_BASE HPM_ADC2 #define BOARD_BLDC_ADC_TRIG_FLAG adc12_event_trig_complete #define BOARD_BLDC_ADC_CH_U (1U) #define BOARD_BLDC_ADC_CH_V (2U) #define BOARD_BLDC_ADC_CH_W (3U) #define BOARD_BLDC_ADC_IRQn IRQn_ADC0 #define BOARD_BLDC_ADC_PMT_DMA_SIZE_IN_4BYTES (ADC_SOC_PMT_MAX_DMA_BUFF_LEN_IN_4BYTES) #define BOARD_BLDC_ADC_TRG ADC12_CONFIG_TRG1A #define BOARD_BLDC_ADC_PREEMPT_TRIG_LEN (1U) #define BOARD_BLDC_PWM_TRIG_CMP_INDEX (8U) #define BOARD_BLDC_TRIGMUX_IN_NUM HPM_TRGM1_INPUT_SRC_PWM1_CH8REF #define BOARD_BLDC_TRG_NUM TRGM_TRGOCFG_ADCX_PTRGI0A #define BOARD_BLDC_ADC_IRQn IRQn_ADC0 #define BOARD_CPU_FREQ (648000000UL) #define BOARD_APP_DISPLAY_CLOCK clock_display #ifndef BOARD_SHOW_CLOCK #define BOARD_SHOW_CLOCK 1 #endif #ifndef BOARD_SHOW_BANNER #define BOARD_SHOW_BANNER 1 #endif /* FreeRTOS Definitions */ #define BOARD_FREERTOS_TIMER HPM_GPTMR4 #define BOARD_FREERTOS_TIMER_CHANNEL 1 #define BOARD_FREERTOS_TIMER_IRQ IRQn_GPTMR4 #define BOARD_FREERTOS_TIMER_CLK_NAME clock_gptmr4 /* Threadx Definitions */ #define BOARD_THREADX_TIMER HPM_GPTMR4 #define BOARD_THREADX_TIMER_CHANNEL 1 #define BOARD_THREADX_TIMER_IRQ IRQn_GPTMR4 #define BOARD_THREADX_TIMER_CLK_NAME clock_gptmr4 #ifndef BOARD_RUNNING_CORE #define BOARD_RUNNING_CORE 0 #endif /* Tamper Section */ #define BOARD_TAMP_ACTIVE_CH 8 #define BOARD_TAMP_LOW_LEVEL_CH 10 #if defined(__cplusplus) extern "C" { #endif /* __cplusplus */ typedef void (*board_timer_cb)(void); void board_init(void); void board_init_console(void); void board_init_core1(void); void board_init_uart(UART_Type *ptr); void board_init_i2c(I2C_Type *ptr); void board_init_lcd(void); void board_lcd_backlight(bool is_on); void board_panel_para_to_lcdc(lcdc_config_t *config); void board_init_can(CAN_Type *ptr); uint32_t board_init_femc_clock(void); void board_init_sdram_pins(void); void board_init_gpio_pins(void); void board_init_spi_pins(SPI_Type *ptr); void board_init_spi_pins_with_gpio_as_cs(SPI_Type *ptr); void board_write_spi_cs(uint32_t pin, uint8_t state); void board_init_led_pins(void); /* cap touch */ void board_init_cap_touch(void); void board_led_write(uint8_t state); void board_led_toggle(void); void board_fpga_power_enable(void); void board_init_cam_pins(void); /* Initialize SoC overall clocks */ void board_init_clock(void); /* Initialize the UART clock */ uint32_t board_init_uart_clock(UART_Type *ptr); /* Initialize the CAM(camera) dot clock */ uint32_t board_init_cam_clock(CAM_Type *ptr); /* Initialize the LCD pixel clock */ uint32_t board_init_lcd_clock(void); uint32_t board_init_uart_clock(UART_Type *ptr); uint32_t board_init_spi_clock(SPI_Type *ptr); uint32_t board_init_adc12_clock(ADC12_Type *ptr, bool clk_src_ahb); uint32_t board_init_adc16_clock(ADC16_Type *ptr, bool clk_src_ahb); uint32_t board_init_can_clock(CAN_Type *ptr); uint32_t board_init_pwm_clock(PWM_Type *ptr); hpm_stat_t board_set_audio_pll_clock(uint32_t freq); void board_init_i2s_pins(I2S_Type *ptr); uint32_t board_init_i2s_clock(I2S_Type *ptr); uint32_t board_config_i2s_clock(I2S_Type *ptr, uint32_t sample_rate); uint32_t board_init_pdm_clock(void); uint32_t board_init_dao_clock(void); uint32_t board_config_i2s_clock(I2S_Type *ptr, uint32_t sample_rate); uint32_t board_init_gptmr_clock(GPTMR_Type *ptr); void board_init_sd_pins(SDXC_Type *ptr); uint32_t board_sd_configure_clock(SDXC_Type *ptr, uint32_t freq, bool need_inverse); void board_sd_switch_pins_to_1v8(SDXC_Type *ptr); bool board_sd_detect_card(SDXC_Type *ptr); void board_init_dao_pins(void); void board_init_adc12_pins(void); void board_init_adc16_pins(void); void board_init_usb_pins(void); void board_usb_vbus_ctrl(uint8_t usb_index, uint8_t level); void board_init_enet_pps_pins(ENET_Type *ptr); uint8_t board_get_enet_dma_pbl(ENET_Type *ptr); hpm_stat_t board_reset_enet_phy(ENET_Type *ptr); hpm_stat_t board_init_enet_pins(ENET_Type *ptr); hpm_stat_t board_init_enet_rmii_reference_clock(ENET_Type *ptr, bool internal); hpm_stat_t board_init_enet_ptp_clock(ENET_Type *ptr); hpm_stat_t board_enable_enet_irq(ENET_Type *ptr); hpm_stat_t board_disable_enet_irq(ENET_Type *ptr); /* * @brief Initialize PMP and PMA for but not limited to the following purposes: * -- non-cacheable memory initialization */ void board_init_pmp(void); void board_delay_ms(uint32_t ms); void board_delay_us(uint32_t us); void board_init_beep_pwm_pins(void); void board_init_rgb_pwm_pins(void); void board_timer_create(uint32_t ms, board_timer_cb cb); void board_enable_output_rgb_led(uint8_t color); void board_disable_output_rgb_led(uint8_t color); /* * Keep mchtmr clock on low power mode */ void board_ungate_mchtmr_at_lp_mode(void); /* * Get PWM output level of onboard LED */ uint8_t board_get_led_pwm_off_level(void); /* * Get GPIO pin level of onboard LED */ uint8_t board_get_led_gpio_off_level(void); void board_sd_power_switch(SDXC_Type *ptr, bool on_off); #if defined(__cplusplus) } #endif /* __cplusplus */ #endif /* _HPM_BOARD_H */