/******************************************************************************* * \file cy8c6xxa_cm4_dual.icf * \version 2.91 * * Linker file for the IAR compiler. * * The main purpose of the linker script is to describe how the sections in the * input files should be mapped into the output file, and to control the memory * layout of the output file. * * \note The entry point is fixed and starts at 0x10000000. The valid application * image should be placed there. * * \note The linker files included with the PDL template projects must be generic * and handle all common use cases. Your project may not use every section * defined in the linker files. In that case you may see warnings during the * build process. In your project, you can simply comment out or remove the * relevant code in the linker file. * ******************************************************************************** * \copyright * Copyright 2016-2021 Cypress Semiconductor Corporation * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. *******************************************************************************/ /*###ICF### Section handled by ICF editor, don't touch! ****/ /*-Editor annotation file-*/ /* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */ /*-Specials-*/ define symbol __ICFEDIT_intvec_start__ = 0x00000000; /* The symbols below define the location and size of blocks of memory in the target. * Use these symbols to specify the memory regions available for allocation. */ /* The following symbols control RAM and flash memory allocation for the CM4 core. * You can change the memory allocation by editing RAM and Flash symbols. * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use. * Using this memory region for other purposes will lead to unexpected behavior. * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf', * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'. */ /* RAM */ define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000; define symbol __ICFEDIT_region_IRAM1_end__ = 0x080FF7FF; /* Flash */ define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000; define symbol __ICFEDIT_region_IROM1_end__ = 0x101FFFFF; /* The following symbols define a 32K flash region used for EEPROM emulation. * This region can also be used as the general purpose flash. * You can assign sections to this memory region for only one of the cores. * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region. * Therefore, repurposing this memory region will prevent such middleware from operation. */ define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000; define symbol __ICFEDIT_region_IROM2_end__ = 0x14007FFF; /* The following symbols define device specific memory regions and must not be changed. */ /* Supervisory FLASH - User Data */ define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800; define symbol __ICFEDIT_region_IROM3_end__ = 0x16000FFF; /* Supervisory FLASH - Normal Access Restrictions (NAR) */ define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00; define symbol __ICFEDIT_region_IROM4_end__ = 0x16001BFF; /* Supervisory FLASH - Public Key */ define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00; define symbol __ICFEDIT_region_IROM5_end__ = 0x160065FF; /* Supervisory FLASH - Table of Content # 2 */ define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00; define symbol __ICFEDIT_region_IROM6_end__ = 0x16007DFF; /* Supervisory FLASH - Table of Content # 2 Copy */ define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00; define symbol __ICFEDIT_region_IROM7_end__ = 0x16007FFF; /* eFuse */ define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000; define symbol __ICFEDIT_region_IROM8_end__ = 0x907FFFFF; /* XIP */ define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000; define symbol __ICFEDIT_region_EROM1_end__ = 0x1FFFFFFF; define symbol __ICFEDIT_region_EROM2_start__ = 0x0; define symbol __ICFEDIT_region_EROM2_end__ = 0x0; define symbol __ICFEDIT_region_EROM3_start__ = 0x0; define symbol __ICFEDIT_region_EROM3_end__ = 0x0; define symbol __ICFEDIT_region_IRAM2_start__ = 0x0; define symbol __ICFEDIT_region_IRAM2_end__ = 0x0; define symbol __ICFEDIT_region_ERAM1_start__ = 0x0; define symbol __ICFEDIT_region_ERAM1_end__ = 0x0; define symbol __ICFEDIT_region_ERAM2_start__ = 0x0; define symbol __ICFEDIT_region_ERAM2_end__ = 0x0; define symbol __ICFEDIT_region_ERAM3_start__ = 0x0; define symbol __ICFEDIT_region_ERAM3_end__ = 0x0; /*-Sizes-*/ if (!isdefinedsymbol(__STACK_SIZE)) { define symbol __ICFEDIT_size_cstack__ = 0x1000; } else { define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE; } define symbol __ICFEDIT_size_proc_stack__ = 0x0; /* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */ if (!isdefinedsymbol(__HEAP_SIZE)) { define symbol __ICFEDIT_size_heap__ = 0x0400; } else { define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE; } /**** End of ICF editor section. ###ICF###*/ /* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core. * More about CM0+ prebuilt images, see here: * https://github.com/cypresssemiconductorco/psoc6cm0p */ /* The size of the Cortex-M0+ application image */ define symbol FLASH_CM0P_SIZE = 0x2000; define memory mem with size = 4G; define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__]; define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__]; define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__]; define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__]; define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__]; define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__]; define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__]; define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__]; define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__]; define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__]; define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { }; define block HEAP with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { }; define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK}; define block CM0P_RO with size = FLASH_CM0P_SIZE { readonly section .cy_m0p_image }; define block RO {first section .intvec, readonly}; define block cy_xip { section .cy_xip }; /*-Initializations-*/ initialize by copy { readwrite }; do not initialize { section .noinit, section .intvec_ram }; /*-Placement-*/ /* Flash - Cortex-M0+ application image */ place at start of IROM1_region { block CM0P_RO }; /* Flash - Cortex-M4 application */ place in IROM1_region { block RO }; /* Used for the digital signature of the secure application and the Bootloader SDK application. */ ".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature }; /* Emulated EEPROM Flash area */ ".cy_em_eeprom" : place at start of IROM2_region { section .cy_em_eeprom }; /* Supervisory Flash - User Data */ ".cy_sflash_user_data" : place at start of IROM3_region { section .cy_sflash_user_data }; /* Supervisory Flash - NAR */ ".cy_sflash_nar" : place at start of IROM4_region { section .cy_sflash_nar }; /* Supervisory Flash - Public Key */ ".cy_sflash_public_key" : place at start of IROM5_region { section .cy_sflash_public_key }; /* Supervisory Flash - TOC2 */ ".cy_toc_part2" : place at start of IROM6_region { section .cy_toc_part2 }; /* Supervisory Flash - RTOC2 */ ".cy_rtoc_part2" : place at start of IROM7_region { section .cy_rtoc_part2 }; /* eFuse */ ".cy_efuse" : place at start of IROM8_region { section .cy_efuse }; /* Execute in Place (XIP). See the smif driver documentation for details. */ "cy_xip" : place at start of EROM1_region { block cy_xip }; /* RAM */ place at start of IRAM1_region { readwrite section .intvec_ram}; place in IRAM1_region { readwrite }; place at end of IRAM1_region { block HSTACK }; /* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */ ".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta }; keep { section .cy_m0p_image, section .cy_app_signature, section .cy_em_eeprom, section .cy_sflash_user_data, section .cy_sflash_nar, section .cy_sflash_public_key, section .cy_toc_part2, section .cy_rtoc_part2, section .cy_efuse, section .cy_xip, section .cymeta, }; /* The following symbols used by the cymcuelftool. */ /* Flash */ define exported symbol __cy_memory_0_start = 0x10000000; define exported symbol __cy_memory_0_length = 0x00200000; define exported symbol __cy_memory_0_row_size = 0x200; /* Emulated EEPROM Flash area */ define exported symbol __cy_memory_1_start = 0x14000000; define exported symbol __cy_memory_1_length = 0x8000; define exported symbol __cy_memory_1_row_size = 0x200; /* Supervisory Flash */ define exported symbol __cy_memory_2_start = 0x16000000; define exported symbol __cy_memory_2_length = 0x8000; define exported symbol __cy_memory_2_row_size = 0x200; /* XIP */ define exported symbol __cy_memory_3_start = 0x18000000; define exported symbol __cy_memory_3_length = 0x08000000; define exported symbol __cy_memory_3_row_size = 0x200; /* eFuse */ define exported symbol __cy_memory_4_start = 0x90700000; define exported symbol __cy_memory_4_length = 0x100000; define exported symbol __cy_memory_4_row_size = 1; /* EOF */