/* * Copyright (c) 2023-2024 HPMicro * SPDX-License-Identifier: BSD-3-Clause * */ #include "board.h" #include "rtt_board.h" #include "hpm_uart_drv.h" #include "hpm_gpio_drv.h" #include "hpm_pmp_drv.h" #include "assert.h" #include "hpm_clock_drv.h" #include "hpm_sysctl_drv.h" #include #include #include "hpm_dma_mgr.h" #include "hpm_mchtmr_drv.h" extern int rt_hw_uart_init(void); void os_tick_config(void); void rtt_board_init(void); void rt_hw_board_init(void) { rtt_board_init(); /* Call the RT-Thread Component Board Initialization */ rt_components_board_init(); } void os_tick_config(void) { sysctl_config_clock(HPM_SYSCTL, clock_node_mchtmr0, clock_source_osc0_clk0, 1); sysctl_add_resource_to_cpu0(HPM_SYSCTL, sysctl_resource_mchtmr0); mchtmr_set_compare_value(HPM_MCHTMR, BOARD_MCHTMR_FREQ_IN_HZ / RT_TICK_PER_SECOND); enable_mchtmr_irq(); } void rtt_board_init(void) { board_init_clock(); board_init_console(); board_init_pmp(); dma_mgr_init(); /* initialize memory system */ rt_system_heap_init(RT_HW_HEAP_BEGIN, RT_HW_HEAP_END); /* Configure the OS Tick */ os_tick_config(); /* Configure the USB pins*/ board_init_usb_pins(); /* Initialize the UART driver first, because later driver initialization may require the rt_kprintf */ rt_hw_uart_init(); /* Set console device */ rt_console_set_device(RT_CONSOLE_DEVICE_NAME); } void app_init_led_pins(void) { gpio_set_pin_output(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN); gpio_write_pin(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN, BOARD_LED_OFF_LEVEL); } void app_led_write(uint32_t index, bool state) { gpio_write_pin(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN, state); } void BOARD_LED_write(uint32_t index, bool state) { switch (index) { case 0: gpio_write_pin(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN, state); break; default: /* Suppress the toolchain warnings */ break; } } void rt_hw_console_output(const char *str) { while (*str != '\0') { uart_send_byte(BOARD_APP_UART_BASE, *str++); } } void app_init_usb_pins(void) { board_init_usb_pins(); } ATTR_PLACE_AT(".isr_vector") void mchtmr_isr(void) { HPM_MCHTMR->MTIMECMP = HPM_MCHTMR->MTIME + BOARD_MCHTMR_FREQ_IN_HZ / RT_TICK_PER_SECOND; rt_tick_increase(); } void rt_hw_cpu_reset(void) { HPM_PPOR->RESET_ENABLE = (1UL << 31); HPM_PPOR->SOFTWARE_RESET = 1000U; while(1) { } } MSH_CMD_EXPORT_ALIAS(rt_hw_cpu_reset, reset, reset the board);