menu "Device Drivers" config RT_USING_DEVICE_IPC bool "Using device drivers IPC" default y config RT_USING_SERIAL bool "Using serial device drivers" select RT_USING_DEVICE_IPC select RT_USING_DEVICE default y config RT_USING_CAN bool "Using CAN device drivers" default n if RT_USING_CAN config RT_CAN_USING_HDR bool "Enable CAN hardware filter" default y endif config RT_USING_HWTIMER bool "Using hardware timer device drivers" default n config RT_USING_CPUTIME bool "Enable CPU time for high resolution clock counter" default n help When enable this option, the BSP should provide a rt_clock_cputime_ops for CPU time by: const static struct rt_clock_cputime_ops _ops = {...}; clock_cpu_setops(&_ops); Then user can use high resolution clock counter with: ts1 = clock_cpu_gettime(); ts2 = clock_cpu_gettime(); /* and get the ms of delta tick with API: */ ms_tick = clock_cpu_millisecond(t2 - t1); us_tick = clock_cpu_microsecond(t2 - t1); if RT_USING_CPUTIME config RT_USING_CPUTIME_CORTEXM bool "Use DWT for CPU time" default y depends on ARCH_ARM_CORTEX_M3 || ARCH_ARM_CORTEX_M4 || ARCH_ARM_CORTEX_M7 help Some Cortex-M3/4/7 MCU has Data Watchpoint and Trace Register, use the cycle counter in DWT for CPU time. endif config RT_USING_I2C bool "Using I2C device drivers" default n if RT_USING_I2C config RT_USING_I2C_BITOPS bool "Use GPIO to simulate I2C" default y endif config RT_USING_PIN bool "Using generic GPIO device drivers" default y config RT_USING_MTD_NOR bool "Using MTD Nor Flash device drivers" default n config RT_USING_MTD_NAND bool "Using MTD Nand Flash device drivers" default n if RT_USING_MTD_NAND config RT_MTD_NAND_DEBUG bool "Enable MTD Nand operations debug information" default n endif config RT_USING_RTC bool "Using RTC device drivers" default n if RT_USING_RTC config RT_USING_SOFT_RTC bool "Using software simulation RTC device" default n config RTC_SYNC_USING_NTP bool "Using NTP auto sync RTC time" select PKG_USING_NETUTILS select PKG_NETUTILS_NTP default n if RTC_SYNC_USING_NTP config RTC_NTP_FIRST_SYNC_DELAY int "NTP first sync delay time(second) for network connect" default 30 config RTC_NTP_SYNC_PERIOD int "NTP auto sync period(second)" default 3600 endif endif config RT_USING_SDIO bool "Using SD/MMC device drivers" default n config RT_USING_SPI bool "Using SPI Bus/Device device drivers" default n if RT_USING_SPI config RT_USING_SPI_MSD bool "Using SD/TF card driver with spi" select RT_USING_DFS default n config RT_USING_SFUD bool "Using Serial Flash Universal Driver" default n if RT_USING_SFUD config RT_SFUD_USING_SFDP bool "Using auto probe flash JEDEC SFDP parameter" default y config RT_SFUD_USING_FLASH_INFO_TABLE bool "Using defined supported flash chip information table" default y config RT_DEBUG_SFUD bool "Show more SFUD debug information" default n endif config RT_USING_W25QXX bool "Using W25QXX SPI NorFlash" default n config RT_USING_GD bool "Using GD SPI NorFlash" default n config RT_USING_ENC28J60 bool "Using ENC28J60 SPI Ethernet network interface" select RT_USING_LWIP default n config RT_USING_SPI_WIFI bool "Using RW009/007 SPI Wi-Fi wireless interface" select RT_USING_LWIP default n endif config RT_USING_WDT bool "Using Watch Dog device drivers" default n config RT_USING_WIFI bool "Using Wi-Fi network" default n menu "Using USB" config RT_USING_USB_HOST bool "Using USB host" default n if RT_USING_USB_HOST config RT_USBH_MSTORAGE bool "Enable Udisk Drivers" default n if RT_USBH_MSTORAGE config UDISK_MOUNTPOINT string "Udisk mount dir" default "/" endif endif config RT_USING_USB_DEVICE bool "Using USB device" default n if RT_USING_USB_DEVICE config USB_VENDOR_ID hex "USB Vendor ID" default 0x0FFE config USB_PRODUCT_ID hex "USB Product ID" default 0x0001 config RT_USB_DEVICE_COMPOSITE bool "Enable composite device" default n choice prompt "Device type" default _RT_USB_DEVICE_CDC depends on !RT_USB_DEVICE_COMPOSITE config _RT_USB_DEVICE_CDC bool "Enable to use device as CDC device" select RT_USB_DEVICE_CDC config _RT_USB_DEVICE_MSTORAGE bool "Enable to use device as Mass Storage device" select RT_USB_DEVICE_MSTORAGE config _RT_USB_DEVICE_HID bool "Enable to use device as HID device" select RT_USB_DEVICE_HID config _RT_USB_DEVICE_RNDIS bool "Enable to use device as rndis device" select RT_USB_DEVICE_RNDIS depends on RT_USING_LWIP config _RT_USB_DEVICE_ECM bool "Enable to use device as ecm device" select RT_USB_DEVICE_ECM depends on RT_USING_LWIP config _RT_USB_DEVICE_WINUSB bool "Enable to use device as winusb device" select RT_USB_DEVICE_WINUSB endchoice if RT_USB_DEVICE_COMPOSITE config RT_USB_DEVICE_CDC bool "Enable to use device as CDC device" default y config RT_USB_DEVICE_MSTORAGE bool "Enable to use device as Mass Storage device" default n config RT_USB_DEVICE_HID bool "Enable to use device as HID device" default n config RT_USB_DEVICE_RNDIS bool "Enable to use device as rndis device" default n depends on RT_USING_LWIP config RT_USB_DEVICE_ECM bool "Enable to use device as ecm device" default n depends on RT_USING_LWIP config RT_USB_DEVICE_WINUSB bool "Enable to use device as winusb device" default n endif if RT_USB_DEVICE_WINUSB config RT_WINUSB_GUID string "Guid for winusb" default "{6860DC3C-C05F-4807-8807-1CA861CC1D66}" endif if RT_USB_DEVICE_MSTORAGE config RT_USB_MSTORAGE_DISK_NAME string "msc class disk name" default "flash0" endif if RT_USB_DEVICE_HID config RT_USB_DEVICE_HID_KEYBOARD bool "Use to HID device as Keyboard" default n if RT_USB_DEVICE_HID_KEYBOARD config RT_USB_DEVICE_HID_KEYBOARD_NUMBER int "Number of Keyboard(max 3)" default 1 range 1 3 endif config RT_USB_DEVICE_HID_MOUSE bool "Use to HID device as Mouse" default n config RT_USB_DEVICE_HID_GENERAL bool "Use to HID device as General HID device" default y if RT_USB_DEVICE_HID_GENERAL config RT_USB_DEVICE_HID_GENERAL_OUT_REPORT_LENGTH int "General HID device out report length" default 63 range 0 63 config RT_USB_DEVICE_HID_GENERAL_IN_REPORT_LENGTH int "General HID device in report length" default 63 range 0 63 endif config RT_USB_DEVICE_HID_MEDIA bool "Use to HID device as media keyboard" default y endif endif endmenu endmenu