/****************************************************************************** * @file nu_qspi.h * @version V3.00 * @brief M2354 series QSPI driver header file * * @copyright SPDX-License-Identifier: Apache-2.0 * @copyright Copyright (C) 2020 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __NU_QSPI_H__ #define __NU_QSPI_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup Standard_Driver Standard Driver @{ */ /** @addtogroup QSPI_Driver QSPI Driver @{ */ /** @addtogroup QSPI_EXPORTED_CONSTANTS QSPI Exported Constants @{ */ #define QSPI_MODE_0 (QSPI_CTL_TXNEG_Msk) /*!< CLKPOL=0; RXNEG=0; TXNEG=1 */ #define QSPI_MODE_1 (QSPI_CTL_RXNEG_Msk) /*!< CLKPOL=0; RXNEG=1; TXNEG=0 */ #define QSPI_MODE_2 (QSPI_CTL_CLKPOL_Msk | QSPI_CTL_RXNEG_Msk) /*!< CLKPOL=1; RXNEG=1; TXNEG=0 */ #define QSPI_MODE_3 (QSPI_CTL_CLKPOL_Msk | QSPI_CTL_TXNEG_Msk) /*!< CLKPOL=1; RXNEG=0; TXNEG=1 */ #define QSPI_SLAVE (QSPI_CTL_SLAVE_Msk) /*!< Set as slave */ #define QSPI_MASTER (0x0UL) /*!< Set as master */ #define QSPI_SS (QSPI_SSCTL_SS_Msk) /*!< Set SS */ #define QSPI_SS_ACTIVE_HIGH (QSPI_SSCTL_SSACTPOL_Msk) /*!< SS active high */ #define QSPI_SS_ACTIVE_LOW (0x0UL) /*!< SS active low */ /* QSPI Interrupt Mask */ #define QSPI_UNIT_INT_MASK (0x001UL) /*!< Unit transfer interrupt mask */ #define QSPI_SSACT_INT_MASK (0x002UL) /*!< Slave selection signal active interrupt mask */ #define QSPI_SSINACT_INT_MASK (0x004UL) /*!< Slave selection signal inactive interrupt mask */ #define QSPI_SLVUR_INT_MASK (0x008UL) /*!< Slave under run interrupt mask */ #define QSPI_SLVBE_INT_MASK (0x010UL) /*!< Slave bit count error interrupt mask */ #define QSPI_SLVTO_INT_MASK (0x020UL) /*!< Slave Mode Time-out interrupt mask */ #define QSPI_TXUF_INT_MASK (0x040UL) /*!< Slave TX underflow interrupt mask */ #define QSPI_FIFO_TXTH_INT_MASK (0x080UL) /*!< FIFO TX threshold interrupt mask */ #define QSPI_FIFO_RXTH_INT_MASK (0x100UL) /*!< FIFO RX threshold interrupt mask */ #define QSPI_FIFO_RXOV_INT_MASK (0x200UL) /*!< FIFO RX overrun interrupt mask */ #define QSPI_FIFO_RXTO_INT_MASK (0x400UL) /*!< FIFO RX time-out interrupt mask */ /* QSPI Status Mask */ #define QSPI_BUSY_MASK (0x01UL) /*!< Busy status mask */ #define QSPI_RX_EMPTY_MASK (0x02UL) /*!< RX empty status mask */ #define QSPI_RX_FULL_MASK (0x04UL) /*!< RX full status mask */ #define QSPI_TX_EMPTY_MASK (0x08UL) /*!< TX empty status mask */ #define QSPI_TX_FULL_MASK (0x10UL) /*!< TX full status mask */ #define QSPI_TXRX_RESET_MASK (0x20UL) /*!< TX or RX reset status mask */ #define QSPI_SPIEN_STS_MASK (0x40UL) /*!< SPIEN status mask */ #define QSPI_SSLINE_STS_MASK (0x80UL) /*!< QSPIx_SS line status mask */ /* QSPI Status2 Mask */ #define QSPI_SLVBENUM_MASK (0x01UL) /*!< Effective bit number of uncompleted RX data status mask */ /**@}*/ /* end of group QSPI_EXPORTED_CONSTANTS */ /** @addtogroup QSPI_EXPORTED_FUNCTIONS QSPI Exported Functions @{ */ /** * @brief Clear the unit transfer interrupt flag. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Write 1 to UNITIF bit of QSPI_STATUS register to clear the unit transfer interrupt flag. */ #define QSPI_CLR_UNIT_TRANS_INT_FLAG(qspi) ( (qspi)->STATUS = QSPI_STATUS_UNITIF_Msk ) /** * @brief Disable 2-bit Transfer mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear TWOBIT bit of QSPI_CTL register to disable 2-bit Transfer mode. */ #define QSPI_DISABLE_2BIT_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_TWOBIT_Msk ) /** * @brief Disable Slave 3-wire mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear SLV3WIRE bit of QSPI_SSCTL register to disable Slave 3-wire mode. */ #define QSPI_DISABLE_3WIRE_MODE(qspi) ( (qspi)->SSCTL &= ~QSPI_SSCTL_SLV3WIRE_Msk ) /** * @brief Disable Dual I/O mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear DUALIOEN bit of QSPI_CTL register to disable Dual I/O mode. */ #define QSPI_DISABLE_DUAL_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_DUALIOEN_Msk ) /** * @brief Disable Quad I/O mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear QUADIOEN bit of QSPI_CTL register to disable Quad I/O mode. */ #define QSPI_DISABLE_QUAD_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_QUADIOEN_Msk ) /** * @brief Disable TX DTR mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear TXDTREN bit of QSPI_CTL register to disable TX DTR mode. */ #define QSPI_DISABLE_TXDTR_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_TXDTREN_Msk ) /** * @brief Enable 2-bit Transfer mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set TWOBIT bit of QSPI_CTL register to enable 2-bit Transfer mode. */ #define QSPI_ENABLE_2BIT_MODE(qspi) ( (qspi)->CTL |= QSPI_CTL_TWOBIT_Msk ) /** * @brief Enable Slave 3-wire mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set SLV3WIRE bit of QSPI_SSCTL register to enable Slave 3-wire mode. */ #define QSPI_ENABLE_3WIRE_MODE(qspi) ( (qspi)->SSCTL |= QSPI_SSCTL_SLV3WIRE_Msk ) /** * @brief Enable Dual input mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear DATDIR bit and set DUALIOEN bit of QSPI_CTL register to enable Dual input mode. */ #define QSPI_ENABLE_DUAL_INPUT_MODE(qspi) ( (qspi)->CTL = ((qspi)->CTL & (~QSPI_CTL_DATDIR_Msk)) | QSPI_CTL_DUALIOEN_Msk ) /** * @brief Enable Dual output mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set DATDIR bit and DUALIOEN bit of QSPI_CTL register to enable Dual output mode. */ #define QSPI_ENABLE_DUAL_OUTPUT_MODE(qspi) ( (qspi)->CTL |= (QSPI_CTL_DATDIR_Msk | QSPI_CTL_DUALIOEN_Msk) ) /** * @brief Enable Quad input mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear DATDIR bit and set QUADIOEN bit of QSPI_CTL register to enable Quad input mode. */ #define QSPI_ENABLE_QUAD_INPUT_MODE(qspi) ( (qspi)->CTL = ((qspi)->CTL & (~QSPI_CTL_DATDIR_Msk)) | QSPI_CTL_QUADIOEN_Msk ) /** * @brief Enable Quad output mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set DATDIR bit and QUADIOEN bit of QSPI_CTL register to enable Quad output mode. */ #define QSPI_ENABLE_QUAD_OUTPUT_MODE(qspi) ( (qspi)->CTL |= (QSPI_CTL_DATDIR_Msk | QSPI_CTL_QUADIOEN_Msk) ) /** * @brief Enable TX DTR mode. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set TXDTREN bit of QSPI_CTL register to enable TX DTR mode. */ #define QSPI_ENABLE_TXDTR_MODE(qspi) ( (qspi)->CTL |= QSPI_CTL_TXDTREN_Msk ) /** * @brief Trigger RX PDMA function. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set RXPDMAEN bit of QSPI_PDMACTL register to enable RX PDMA transfer function. */ #define QSPI_TRIGGER_RX_PDMA(qspi) ( (qspi)->PDMACTL |= QSPI_PDMACTL_RXPDMAEN_Msk ) /** * @brief Trigger TX PDMA function. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set TXPDMAEN bit of QSPI_PDMACTL register to enable TX PDMA transfer function. */ #define QSPI_TRIGGER_TX_PDMA(qspi) ( (qspi)->PDMACTL |= QSPI_PDMACTL_TXPDMAEN_Msk ) /** * @brief Trigger TX and RX PDMA function. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set TXPDMAEN bit and RXPDMAEN bit of QSPI_PDMACTL register to enable TX and RX PDMA transfer function. */ #define QSPI_TRIGGER_TX_RX_PDMA(qspi) ( (qspi)->PDMACTL |= (QSPI_PDMACTL_TXPDMAEN_Msk | QSPI_PDMACTL_RXPDMAEN_Msk) ) /** * @brief Disable RX PDMA transfer. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear RXPDMAEN bit of QSPI_PDMACTL register to disable RX PDMA transfer function. */ #define QSPI_DISABLE_RX_PDMA(qspi) ( (qspi)->PDMACTL &= ~QSPI_PDMACTL_RXPDMAEN_Msk ) /** * @brief Disable TX PDMA transfer. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear TXPDMAEN bit of QSPI_PDMACTL register to disable TX PDMA transfer function. */ #define QSPI_DISABLE_TX_PDMA(qspi) ( (qspi)->PDMACTL &= ~QSPI_PDMACTL_TXPDMAEN_Msk ) /** * @brief Disable TX and RX PDMA transfer. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear TXPDMAEN bit and RXPDMAEN bit of QSPI_PDMACTL register to disable TX and RX PDMA transfer function. */ #define QSPI_DISABLE_TX_RX_PDMA(qspi) ( (qspi)->PDMACTL &= ~(QSPI_PDMACTL_TXPDMAEN_Msk | QSPI_PDMACTL_RXPDMAEN_Msk) ) /** * @brief Get the count of available data in RX FIFO. * @param[in] qspi The pointer of the specified QSPI module. * @return The count of available data in RX FIFO. * @details Read RXCNT (QSPI_STATUS[27:24]) to get the count of available data in RX FIFO. */ #define QSPI_GET_RX_FIFO_COUNT(qspi) ( ((qspi)->STATUS & QSPI_STATUS_RXCNT_Msk) >> QSPI_STATUS_RXCNT_Pos ) /** * @brief Get the RX FIFO empty flag. * @param[in] qspi The pointer of the specified QSPI module. * @retval 0 RX FIFO is not empty. * @retval 1 RX FIFO is empty. * @details Read RXEMPTY bit of QSPI_STATUS register to get the RX FIFO empty flag. */ #define QSPI_GET_RX_FIFO_EMPTY_FLAG(qspi) ( ((qspi)->STATUS & QSPI_STATUS_RXEMPTY_Msk) >> QSPI_STATUS_RXEMPTY_Pos ) /** * @brief Get the TX FIFO empty flag. * @param[in] qspi The pointer of the specified QSPI module. * @retval 0 TX FIFO is not empty. * @retval 1 TX FIFO is empty. * @details Read TXEMPTY bit of QSPI_STATUS register to get the TX FIFO empty flag. */ #define QSPI_GET_TX_FIFO_EMPTY_FLAG(qspi) ( ((qspi)->STATUS & QSPI_STATUS_TXEMPTY_Msk) >> QSPI_STATUS_TXEMPTY_Pos ) /** * @brief Get the TX FIFO full flag. * @param[in] qspi The pointer of the specified QSPI module. * @retval 0 TX FIFO is not full. * @retval 1 TX FIFO is full. * @details Read TXFULL bit of QSPI_STATUS register to get the TX FIFO full flag. */ #define QSPI_GET_TX_FIFO_FULL_FLAG(qspi) ( ((qspi)->STATUS & QSPI_STATUS_TXFULL_Msk) >> QSPI_STATUS_TXFULL_Pos ) /** * @brief Get the datum read from RX register. * @param[in] qspi The pointer of the specified QSPI module. * @return Data in RX register. * @details Read QSPI_RX register to get the received datum. */ #define QSPI_READ_RX(qspi) ( (qspi)->RX ) /** * @brief Write datum to TX register. * @param[in] qspi The pointer of the specified QSPI module. * @param[in] u32TxData The datum which user attempt to transfer through QSPI bus. * @return None. * @details Write u32TxData to QSPI_TX register. */ #define QSPI_WRITE_TX(qspi, u32TxData) ( (qspi)->TX = (u32TxData) ) /** * @brief Set QSPIx_SS pin to high state. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Disable automatic slave selection function and set QSPIx_SS pin to high state. */ #define QSPI_SET_SS_HIGH(qspi) ( (qspi)->SSCTL = ((qspi)->SSCTL & (~QSPI_SSCTL_AUTOSS_Msk)) | (QSPI_SSCTL_SSACTPOL_Msk | QSPI_SSCTL_SS_Msk) ) /** * @brief Set QSPIx_SS pin to low state. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Disable automatic slave selection function and set QSPIx_SS pin to low state. */ #define QSPI_SET_SS_LOW(qspi) ( (qspi)->SSCTL = ((qspi)->SSCTL & (~(QSPI_SSCTL_AUTOSS_Msk | QSPI_SSCTL_SSACTPOL_Msk))) | QSPI_SSCTL_SS_Msk ) /** * @brief Enable Byte Reorder function. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Enable Byte Reorder function. The suspend interval depends on the setting of SUSPITV (QSPI_CTL[7:4]). */ #define QSPI_ENABLE_BYTE_REORDER(qspi) ( (qspi)->CTL |= QSPI_CTL_REORDER_Msk ) /** * @brief Disable Byte Reorder function. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear REORDER bit field of QSPI_CTL register to disable Byte Reorder function. */ #define QSPI_DISABLE_BYTE_REORDER(qspi) ( (qspi)->CTL &= ~QSPI_CTL_REORDER_Msk ) /** * @brief Set the length of suspend interval. * @param[in] qspi The pointer of the specified QSPI module. * @param[in] u32SuspCycle Decides the length of suspend interval. It could be 0 ~ 15. * @return None. * @details Set the length of suspend interval according to u32SuspCycle. * The length of suspend interval is ((u32SuspCycle + 0.5) * the length of one QSPI bus clock cycle). */ #define QSPI_SET_SUSPEND_CYCLE(qspi, u32SuspCycle) ( (qspi)->CTL = ((qspi)->CTL & ~QSPI_CTL_SUSPITV_Msk) | ((u32SuspCycle) << QSPI_CTL_SUSPITV_Pos) ) /** * @brief Set the QSPI transfer sequence with LSB first. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set LSB bit of QSPI_CTL register to set the QSPI transfer sequence with LSB first. */ #define QSPI_SET_LSB_FIRST(qspi) ( (qspi)->CTL |= QSPI_CTL_LSB_Msk ) /** * @brief Set the QSPI transfer sequence with MSB first. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear LSB bit of QSPI_CTL register to set the QSPI transfer sequence with MSB first. */ #define QSPI_SET_MSB_FIRST(qspi) ( (qspi)->CTL &= ~QSPI_CTL_LSB_Msk ) /** * @brief Set the data width of a QSPI transaction. * @param[in] qspi The pointer of the specified QSPI module. * @param[in] u32Width The bit width of one transaction. * @return None. * @details The data width can be 8 ~ 32 bits. */ #define QSPI_SET_DATA_WIDTH(qspi, u32Width) ( (qspi)->CTL = ((qspi)->CTL & ~QSPI_CTL_DWIDTH_Msk) | (((u32Width) & 0x1F) << QSPI_CTL_DWIDTH_Pos) ) /** * @brief Get the QSPI busy state. * @param[in] qspi The pointer of the specified QSPI module. * @retval 0 QSPI controller is not busy. * @retval 1 QSPI controller is busy. * @details This macro will return the busy state of QSPI controller. */ #define QSPI_IS_BUSY(qspi) ( ((qspi)->STATUS & QSPI_STATUS_BUSY_Msk) >> QSPI_STATUS_BUSY_Pos ) /** * @brief Enable QSPI controller. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Set SPIEN (QSPI_CTL[0]) to enable QSPI controller. */ #define QSPI_ENABLE(qspi) ( (qspi)->CTL |= QSPI_CTL_SPIEN_Msk ) /** * @brief Disable QSPI controller. * @param[in] qspi The pointer of the specified QSPI module. * @return None. * @details Clear SPIEN (QSPI_CTL[0]) to disable QSPI controller. */ #define QSPI_DISABLE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_SPIEN_Msk ) /* Function prototype declaration */ uint32_t QSPI_Open(QSPI_T *qspi, uint32_t u32MasterSlave, uint32_t u32QSPIMode, uint32_t u32DataWidth, uint32_t u32BusClock); void QSPI_Close(QSPI_T *qspi); void QSPI_ClearRxFIFO(QSPI_T *qspi); void QSPI_ClearTxFIFO(QSPI_T *qspi); void QSPI_DisableAutoSS(QSPI_T *qspi); void QSPI_EnableAutoSS(QSPI_T *qspi, uint32_t u32SSPinMask, uint32_t u32ActiveLevel); uint32_t QSPI_SetBusClock(QSPI_T *qspi, uint32_t u32BusClock); void QSPI_SetFIFO(QSPI_T *qspi, uint32_t u32TxThreshold, uint32_t u32RxThreshold); uint32_t QSPI_GetBusClock(QSPI_T *qspi); void QSPI_EnableInt(QSPI_T *qspi, uint32_t u32Mask); void QSPI_DisableInt(QSPI_T *qspi, uint32_t u32Mask); uint32_t QSPI_GetIntFlag(QSPI_T *qspi, uint32_t u32Mask); void QSPI_ClearIntFlag(QSPI_T *qspi, uint32_t u32Mask); uint32_t QSPI_GetStatus(QSPI_T *qspi, uint32_t u32Mask); uint32_t QSPI_GetStatus2(QSPI_T *qspi, uint32_t u32Mask); /**@}*/ /* end of group QSPI_EXPORTED_FUNCTIONS */ /**@}*/ /* end of group QSPI_Driver */ /**@}*/ /* end of group Standard_Driver */ #ifdef __cplusplus } #endif #endif /* __NU_QSPI_H__ */