menu "Hardware Drivers Config"


config BSP_USING_HYPERFLASH
    bool
    default n

config BSP_USING_4MFLASH
    bool
    default n

config SOC_MIMXRT1062DVL6A
    bool
    select SOC_IMXRT1060_SERIES
    select BSP_USING_4MFLASH
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

menu "Onboard Peripheral Drivers"

    config BSP_USING_SDRAM
        bool "Enable SDRAM"
        default n

    menuconfig BSP_USING_ETH
        bool "Enable Ethernet"
        select RT_USING_NETDEV
        select RT_USING_LWIP
        default n

    if BSP_USING_ETH
        config BSP_USING_PHY
            select RT_USING_PHY
            bool "Enable ethernet phy"
            default y

        if BSP_USING_PHY
            config PHY_USING_KSZ8081
                bool "i.MX RT1060EVK uses ksz8081 phy"
                default y

            if PHY_USING_KSZ8081
                config PHY_KSZ8081_ADDRESS
                int "Specify address of phy device"
                default 2

                config PHY_RESET_KSZ8081_PORT
                    int "indicate port of reset"
                    default 1

                config PHY_RESET_KSZ8081_PIN
                    int "indicate pin of reset"
                    default 9

                config FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE
                    bool "Enable the PHY ksz8081 RMII50M mode"
                    depends on PHY_USING_KSZ8081
                    default y
            endif
        endif
    endif

    menuconfig BSP_USING_LCD
        bool "Enable LCD"
        default n
        if BSP_USING_LCD
            config LCD_WIDTH
                int "width"
                default 480

            config LCD_HEIGHT
                int "height"
                default 272

            config LCD_HFP
                int "HFP"
                default 4

            config LCD_VFP
                int "VFP"
                default 4

            config LCD_HBP
                int "HBP"
                default 8

            config LCD_VBP
                int "VBP"
                default 2

            config LCD_HSW
                int "HSW"
                default 40

            config LCD_VSW
                int "VSW"
                default 10

            config LCD_BL_PIN
                int "Backlight ctrl pin"
                default 63

            config LCD_RST_PIN
                int "Reset pin"
                default 2
        endif

    menuconfig BSP_USING_TOUCHPAD
        bool "Enable TOUCHPAD"
        select BSP_USING_PXP
        select BSP_USING_CACHE
        select BSP_USING_I2C
        select BSP_USING_LCD
        default n
        if BSP_USING_TOUCHPAD
            choice
                prompt "Select panel"
                default DEMO_PANEL_RK043FN66HS

                config DEMO_PANEL_RK043FN02H
                    bool "RK043FN02H-CT"

                config DEMO_PANEL_RK043FN66HS
                    bool "RK043FN66HS-CTG"
            endchoice
        endif

    config BSP_USING_LVGL
        bool "Enable LVGL for LCD"
        select BSP_USING_PXP
        select BSP_USING_CACHE
        select BSP_USING_LCD
        select BSP_USING_TOUCHPAD
        select PKG_USING_LVGL
        default n

    if BSP_USING_LVGL
        config BSP_USING_LVGL_DEMO
            bool "Enable LVGL demo"
            select PKG_USING_LV_MUSIC_DEMO
            default y

        config BSP_USING_NXP_GUIGUIDER
            bool "Support NXP GUI Guider"
            select PKG_USING_GUI_GUIDER_DEMO
            default n
    endif

    menuconfig BSP_USING_FS
        bool "Enable File System"
        select RT_USING_DFS_DEVFS
        select RT_USING_DFS
        default n

        if BSP_USING_FS
            config BSP_USING_SDCARD_FATFS
                bool "Enable SDCARD (FATFS)"
                select BSP_USING_SDIO
                select RT_USING_DFS_ELMFAT
                default n
        endif
endmenu

menu "On-chip Peripheral Drivers"

    config BSP_USING_GPIO
        bool "Enable GPIO"
        select RT_USING_PIN
        default y

    config BSP_USING_RTC
        bool "Enable RTC"
        select RT_USING_RTC
        default n

    config BSP_USING_SDIO
        bool "Enable SDIO"
        select RT_USING_SDIO
        select RT_USING_DFS
        default n

        if BSP_USING_SDIO
            config CODE_STORED_ON_SDCARD
                bool "Enable Code STORED On SDCARD"
                default n
                help
                    "SD CARD work as boot devive"
        endif

    config BSP_USING_USB
        bool "Enable USB"
        select RT_USING_USB_HOST
        default n

        if BSP_USING_USB
        config BSP_USB0_HOST
            bool "Enable USB0"
            default n

        config BSP_USB1_HOST
            bool "Enable USB1"
            default n
        endif

    menuconfig BSP_USING_I2C
        bool "Enable I2C"
        select RT_USING_I2C
        default y
        if BSP_USING_I2C
            config BSP_USING_I2C1
                bool
                default y
            choice
                prompt "Select I2C1 badurate"
                default HW_I2C1_BADURATE_100kHZ

                config HW_I2C1_BADURATE_100kHZ
                    bool "Badurate 100kHZ"

                config HW_I2C1_BADURATE_400kHZ
                    bool "Badurate 400kHZ"
            endchoice
        endif

    menuconfig BSP_USING_LPUART
        bool "Enable UART"
        select RT_USING_SERIAL
        default y
        if BSP_USING_LPUART
            config BSP_USING_LPUART1
                bool "Enable LPUART1"
                default y
            config BSP_USING_LPUART2
                bool "Enable LPUART2"
                default n
            config BSP_USING_LPUART3
                bool "Enable LPUART3"
                default n
            config BSP_USING_LPUART4
                bool "Enable LPUART4"
                default n
            config BSP_USING_LPUART5
                bool "Enable LPUART5"
                default n
            config BSP_USING_LPUART6
                bool "Enable LPUART6"
                default n
            config BSP_USING_LPUART7
                bool "Enable LPUART7"
                default n
            config BSP_USING_LPUART8
                bool "Enable LPUART8"
                default n
        endif

    config BSP_USING_PXP
        bool "Enable PXP"
        default n

    config BSP_USING_CACHE
        bool "Enable CACHE"
        default n

endmenu

menu "Board extended module Drivers"

endmenu

endmenu