/* ** ################################################################### ** Processors: MIMXRT1021CAF4A ** MIMXRT1021CAG4A ** MIMXRT1021DAF5A ** MIMXRT1021DAG5A ** ** Compilers: Keil ARM C/C++ Compiler ** Freescale C/C++ for Embedded ARM ** GNU C Compiler ** IAR ANSI C/C++ Compiler for ARM ** MCUXpresso Compiler ** ** Reference manual: IMXRT1020RM Rev. C, 02/2018 ** Version: rev. 0.1, 2017-11-06 ** Build: b180316 ** ** Abstract: ** Provides a system configuration function and a global variable that ** contains the system frequency. It configures the device and initializes ** the oscillator (PLL) that is part of the microcontroller device. ** ** The Clear BSD License ** Copyright 2016 Freescale Semiconductor, Inc. ** Copyright 2016-2018 NXP ** All rights reserved. ** ** Redistribution and use in source and binary forms, with or without ** modification, are permitted (subject to the limitations in the ** disclaimer below) provided that the following conditions are met: ** ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in the ** documentation and/or other materials provided with the distribution. ** ** * Neither the name of the copyright holder nor the names of its ** contributors may be used to endorse or promote products derived from ** this software without specific prior written permission. ** ** NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE ** GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT ** HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED ** WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ** MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE ** LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, ** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE ** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN ** IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** ** http: www.nxp.com ** mail: support@nxp.com ** ** Revisions: ** - rev. 0.1 (2017-11-06) ** Initial version. ** ** ################################################################### */ /*! * @file MIMXRT1021 * @version 0.1 * @date 2017-11-06 * @brief Device specific configuration file for MIMXRT1021 (implementation file) * * Provides a system configuration function and a global variable that contains * the system frequency. It configures the device and initializes the oscillator * (PLL) that is part of the microcontroller device. */ #include #include "fsl_device_registers.h" /* ---------------------------------------------------------------------------- -- Core clock ---------------------------------------------------------------------------- */ uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK; /* ---------------------------------------------------------------------------- -- SystemInit() ---------------------------------------------------------------------------- */ void SystemInit (void) { #if ((__FPU_PRESENT == 1) && (__FPU_USED == 1)) SCB->CPACR |= ((3UL << 10*2) | (3UL << 11*2)); /* set CP10, CP11 Full Access */ #endif /* ((__FPU_PRESENT == 1) && (__FPU_USED == 1)) */ #if defined(__MCUXPRESSO) extern uint32_t g_pfnVectors[]; // Vector table defined in startup code SCB->VTOR = (uint32_t)g_pfnVectors; #endif /* Disable Watchdog Power Down Counter */ WDOG1->WMCR &= ~WDOG_WMCR_PDE_MASK; WDOG2->WMCR &= ~WDOG_WMCR_PDE_MASK; /* Watchdog disable */ #if (DISABLE_WDOG) if (WDOG1->WCR & WDOG_WCR_WDE_MASK) { WDOG1->WCR &= ~WDOG_WCR_WDE_MASK; } if (WDOG2->WCR & WDOG_WCR_WDE_MASK) { WDOG2->WCR &= ~WDOG_WCR_WDE_MASK; } RTWDOG->CNT = 0xD928C520U; /* 0xD928C520U is the update key */ RTWDOG->TOVAL = 0xFFFF; RTWDOG->CS = (uint32_t) ((RTWDOG->CS) & ~RTWDOG_CS_EN_MASK) | RTWDOG_CS_UPDATE_MASK; #endif /* (DISABLE_WDOG) */ /* Disable Systick which might be enabled by bootrom */ if (SysTick->CTRL & SysTick_CTRL_ENABLE_Msk) { SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk; } /* Enable instruction and data caches */ #if defined(__ICACHE_PRESENT) && __ICACHE_PRESENT if (SCB_CCR_IC_Msk != (SCB_CCR_IC_Msk & SCB->CCR)) { SCB_EnableICache(); } #endif #if defined(__DCACHE_PRESENT) && __DCACHE_PRESENT if (SCB_CCR_DC_Msk != (SCB_CCR_DC_Msk & SCB->CCR)) { SCB_EnableDCache(); } #endif /* Suggest to add it in assembly file */ // IOMUXC_GPR->GPR17 = 0x0000AAA5;// // IOMUXC_GPR->GPR16 |= 0x00000007; SystemInitHook(); } /* ---------------------------------------------------------------------------- -- SystemCoreClockUpdate() ---------------------------------------------------------------------------- */ void SystemCoreClockUpdate (void) { uint32_t freq; uint32_t PLL2MainClock; uint32_t PLL3MainClock; /* Check if system pll is bypassed */ if(CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_BYPASS_MASK) { PLL2MainClock = CPU_XTAL_CLK_HZ; } else { PLL2MainClock = (CPU_XTAL_CLK_HZ * ((CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_DIV_SELECT_MASK) ? 22U : 20U)); } PLL2MainClock += ((uint64_t)CPU_XTAL_CLK_HZ * ((uint64_t)(CCM_ANALOG->PLL_SYS_NUM))) / ((uint64_t)(CCM_ANALOG->PLL_SYS_DENOM)); /* Check if usb1 pll is bypassed */ if(CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_BYPASS_MASK) { PLL3MainClock = CPU_XTAL_CLK_HZ; } else { PLL3MainClock = (CPU_XTAL_CLK_HZ * ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_DIV_SELECT_MASK) ? 22U : 20U)); } /* Periph_clk2_clk ---> Periph_clk */ if (CCM->CBCDR & CCM_CBCDR_PERIPH_CLK_SEL_MASK) { switch (CCM->CBCMR & CCM_CBCMR_PERIPH_CLK2_SEL_MASK) { /* Pll3_sw_clk ---> Periph_clk2_clk ---> Periph_clk ---> Core_clock */ case CCM_CBCMR_PERIPH_CLK2_SEL(0U): freq = PLL3MainClock; break; /* Osc_clk ---> Periph_clk2_clk ---> Periph_clk ---> Core_clock */ case CCM_CBCMR_PERIPH_CLK2_SEL(1U): freq = CPU_XTAL_CLK_HZ; break; /* Pll2_bypass_clk ---> Periph_clk2_clk ---> Periph_clk ---> Core_clock */ case CCM_CBCMR_PERIPH_CLK2_SEL(2U): freq = CPU_XTAL_CLK_HZ; case CCM_CBCMR_PERIPH_CLK2_SEL(3U): default: freq = 0U; break; } freq /= (((CCM->CBCDR & CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >> CCM_CBCDR_PERIPH_CLK2_PODF_SHIFT) + 1U); } /* Pre_Periph_clk ---> Periph_clk */ else { switch (CCM->CBCMR & CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK) { /* PLL2 ---> Pre_Periph_clk ---> Periph_clk ---> Core_clock */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(0U): freq = PLL2MainClock; break; /* PLL3 PFD3 ---> Pre_Periph_clk ---> Periph_clk ---> Core_clock */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(1U): freq = PLL3MainClock / ((CCM_ANALOG->PFD_480 & CCM_ANALOG_PFD_480_PFD3_FRAC_MASK) >> CCM_ANALOG_PFD_480_PFD3_FRAC_SHIFT) * 18U; break; /* PLL2 PFD3 ---> Pre_Periph_clk ---> Periph_clk ---> Core_clock */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(2U): freq = PLL2MainClock / ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD3_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD3_FRAC_SHIFT) * 18U; break; /* PLL6 ---> Pre_Periph_clk ---> Periph_clk ---> Core_clock */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(3U): freq = 500000000U / (((CCM->CACRR & CCM_CACRR_ARM_PODF_MASK) >> CCM_CACRR_ARM_PODF_SHIFT) + 1U); break; default: freq = 0U; break; } } SystemCoreClock = (freq / (((CCM->CBCDR & CCM_CBCDR_AHB_PODF_MASK) >> CCM_CBCDR_AHB_PODF_SHIFT) + 1U)); } /* ---------------------------------------------------------------------------- -- SystemInitHook() ---------------------------------------------------------------------------- */ __attribute__ ((weak)) void SystemInitHook (void) { /* Void implementation of the weak function. */ }