/* * Copyright (c) 2023 HPMicro * * SPDX-License-Identifier: BSD-3-Clause * */ #ifndef _HPM_BOARD_H #define _HPM_BOARD_H #include #include #include "hpm_common.h" #include "hpm_clock_drv.h" #include "hpm_soc.h" #include "hpm_soc_feature.h" #include "pinmux.h" #if !defined(CONFIG_NDEBUG_CONSOLE) || !CONFIG_NDEBUG_CONSOLE #include "hpm_debug_console.h" #endif #define BOARD_NAME "hpm5301evklite" #define BOARD_UF2_SIGNATURE (0x0A4D5048UL) /* ACMP desction */ #define BOARD_ACMP HPM_ACMP #define BOARD_ACMP_CHANNEL ACMP_CHANNEL_CHN1 #define BOARD_ACMP_IRQ IRQn_ACMP_1 #define BOARD_ACMP_PLUS_INPUT ACMP_INPUT_DAC_OUT /* use internal DAC */ #define BOARD_ACMP_MINUS_INPUT ACMP_INPUT_ANALOG_4 /* align with used pin */ /* dma section */ #define BOARD_APP_HDMA HPM_HDMA #define BOARD_APP_HDMA_IRQ IRQn_HDMA #define BOARD_APP_DMAMUX HPM_DMAMUX #define TEST_DMA_CONTROLLER HPM_HDMA #define TEST_DMA_IRQ IRQn_HDMA #ifndef BOARD_RUNNING_CORE #define BOARD_RUNNING_CORE HPM_CORE0 #endif #ifndef BOARD_APP_UART_BASE #define BOARD_APP_UART_BASE HPM_UART3 #define BOARD_APP_UART_IRQ IRQn_UART3 #define BOARD_APP_UART_BAUDRATE (115200UL) #define BOARD_APP_UART_CLK_NAME clock_uart3 #define BOARD_APP_UART_RX_DMA_REQ HPM_DMA_SRC_UART3_RX #define BOARD_APP_UART_TX_DMA_REQ HPM_DMA_SRC_UART3_TX #endif /* uart lin sample section */ #define BOARD_UART_LIN BOARD_APP_UART_BASE #define BOARD_UART_LIN_IRQ BOARD_APP_UART_IRQ #define BOARD_UART_LIN_CLK_NAME BOARD_APP_UART_CLK_NAME #define BOARD_UART_LIN_TX_PORT GPIO_DI_GPIOB #define BOARD_UART_LIN_TX_PIN (15U) /* PB15 should align with used pin in pinmux configuration */ #if !defined(CONFIG_NDEBUG_CONSOLE) || !CONFIG_NDEBUG_CONSOLE #ifndef BOARD_CONSOLE_TYPE #define BOARD_CONSOLE_TYPE CONSOLE_TYPE_UART #endif #if BOARD_CONSOLE_TYPE == CONSOLE_TYPE_UART #ifndef BOARD_CONSOLE_UART_BASE #define BOARD_CONSOLE_UART_BASE HPM_UART0 #define BOARD_CONSOLE_UART_CLK_NAME clock_uart0 #define BOARD_CONSOLE_UART_IRQ IRQn_UART0 #define BOARD_CONSOLE_UART_TX_DMA_REQ HPM_DMA_SRC_UART0_TX #define BOARD_CONSOLE_UART_RX_DMA_REQ HPM_DMA_SRC_UART0_RX #endif #define BOARD_CONSOLE_UART_BAUDRATE (115200UL) #endif #endif /* usb cdc acm uart section */ #define BOARD_USB_CDC_ACM_UART BOARD_APP_UART_BASE #define BOARD_USB_CDC_ACM_UART_CLK_NAME BOARD_APP_UART_CLK_NAME #define BOARD_USB_CDC_ACM_UART_TX_DMA_SRC BOARD_APP_UART_TX_DMA_REQ #define BOARD_USB_CDC_ACM_UART_RX_DMA_SRC BOARD_APP_UART_RX_DMA_REQ /* rtthread-nano finsh section */ #define BOARD_RT_CONSOLE_BASE BOARD_CONSOLE_UART_BASE /* modbus sample section */ #define BOARD_MODBUS_UART_BASE BOARD_APP_UART_BASE #define BOARD_MODBUS_UART_CLK_NAME BOARD_APP_UART_CLK_NAME #define BOARD_MODBUS_UART_RX_DMA_REQ BOARD_APP_UART_RX_DMA_REQ #define BOARD_MODBUS_UART_TX_DMA_REQ BOARD_APP_UART_TX_DMA_REQ /* nor flash section */ #define BOARD_FLASH_BASE_ADDRESS (0x80000000UL) /* Check */ #define BOARD_FLASH_SIZE (SIZE_1MB) /* i2c section */ #define BOARD_APP_I2C_BASE HPM_I2C2 #define BOARD_APP_I2C_IRQ IRQn_I2C2 #define BOARD_APP_I2C_CLK_NAME clock_i2c2 #define BOARD_APP_I2C_DMA HPM_HDMA #define BOARD_APP_I2C_DMAMUX HPM_DMAMUX #define BOARD_APP_I2C_DMA_SRC HPM_DMA_SRC_I2C2 /* gptmr section */ #define BOARD_GPTMR HPM_GPTMR0 #define BOARD_GPTMR_IRQ IRQn_GPTMR0 #define BOARD_GPTMR_CHANNEL 0 #define BOARD_GPTMR_DMA_SRC HPM_DMA_SRC_GPTMR0_0 #define BOARD_GPTMR_CLK_NAME clock_gptmr0 #define BOARD_GPTMR_PWM HPM_GPTMR0 #define BOARD_GPTMR_PWM_CHANNEL 0 #define BOARD_GPTMR_PWM_DMA_SRC HPM_DMA_SRC_GPTMR0_0 #define BOARD_GPTMR_PWM_CLK_NAME clock_gptmr0 #define BOARD_GPTMR_PWM_IRQ IRQn_GPTMR0 #define BOARD_GPTMR_PWM_SYNC HPM_GPTMR0 #define BOARD_GPTMR_PWM_SYNC_CHANNEL 1 #define BOARD_GPTMR_PWM_SYNC_CLK_NAME clock_gptmr0 /* User LED */ #define BOARD_LED_GPIO_CTRL HPM_GPIO0 #define BOARD_LED_GPIO_INDEX GPIO_DI_GPIOA #define BOARD_LED_GPIO_PIN 10 #define BOARD_LED_OFF_LEVEL 1 #define BOARD_LED_ON_LEVEL 0 /* 12V Power Enable*/ #define BOARD_12V_EN_GPIO_CTRL HPM_GPIO0 #define BOARD_12V_EN_GPIO_INDEX GPIO_DI_GPIOA #define BOARD_12V_EN_GPIO_PIN 24 /* gpiom section */ #define BOARD_APP_GPIOM_BASE HPM_GPIOM #define BOARD_APP_GPIOM_USING_CTRL HPM_FGPIO #define BOARD_APP_GPIOM_USING_CTRL_NAME gpiom_core0_fast /* GPIO read value macro,spec for sample cherryusb on board hpm5301evklite*/ #define BOARD_BUTTON_PRESSED_VALUE 1 /* tinyuf2 button on hpm5301evklite*/ #define BOARD_BUTTON_TINYUF2_PIN 9 /* User button */ #define BOARD_APP_GPIO_CTRL HPM_GPIO0 #define BOARD_APP_GPIO_INDEX GPIO_DI_GPIOA #define BOARD_APP_GPIO_PIN 3 #define BOARD_APP_GPIO_IRQ IRQn_GPIO0_A /* spi section */ #define BOARD_APP_SPI_BASE HPM_SPI1 #define BOARD_APP_SPI_CLK_NAME clock_spi1 #define BOARD_APP_SPI_IRQ IRQn_SPI1 #define BOARD_APP_SPI_SCLK_FREQ (20000000UL) #define BOARD_APP_SPI_ADDR_LEN_IN_BYTES (1U) #define BOARD_APP_SPI_DATA_LEN_IN_BITS (8U) #define BOARD_APP_SPI_RX_DMA HPM_DMA_SRC_SPI1_RX #define BOARD_APP_SPI_TX_DMA HPM_DMA_SRC_SPI1_TX #define BOARD_SPI_CS_GPIO_CTRL HPM_GPIO0 #define BOARD_SPI_CS_PIN IOC_PAD_PA26 #define BOARD_SPI_CS_ACTIVE_LEVEL (0U) /* ADC section */ #define BOARD_APP_ADC16_NAME "ADC0" #define BOARD_APP_ADC16_BASE HPM_ADC0 #define BOARD_APP_ADC16_IRQn IRQn_ADC0 #define BOARD_APP_ADC16_CH_1 (11U) #define BOARD_APP_ADC16_CLK_NAME (clock_adc0) #define BOARD_APP_ADC16_PMT_TRIG_CH ADC16_CONFIG_TRG0A /* Flash section */ #define BOARD_APP_XPI_NOR_XPI_BASE (HPM_XPI0) #define BOARD_APP_XPI_NOR_CFG_OPT_HDR (0xfcf90002U) #define BOARD_APP_XPI_NOR_CFG_OPT_OPT0 (0x00000006U) #define BOARD_APP_XPI_NOR_CFG_OPT_OPT1 (0x00001000U) /* CALLBACK TIMER section */ #define BOARD_CALLBACK_TIMER (HPM_GPTMR1) #define BOARD_CALLBACK_TIMER_CH 0 #define BOARD_CALLBACK_TIMER_IRQ IRQn_GPTMR1 #define BOARD_CALLBACK_TIMER_CLK_NAME (clock_gptmr1) /*Timer define*/ #define BOARD_BLDC_TMR_1MS HPM_GPTMR2 #define BOARD_BLDC_TMR_CH 0 #define BOARD_BLDC_TMR_CMP 0 #define BOARD_BLDC_TMR_IRQ IRQn_GPTMR2 #define BOARD_BLDC_TMR_RELOAD (100000U) /*adc*/ #define BOARD_BLDC_ADC_MODULE (ADCX_MODULE_ADC16) #define BOARD_BLDC_ADC_U_BASE HPM_ADC0 #define BOARD_BLDC_ADC_V_BASE HPM_ADC1 #define BOARD_BLDC_ADC_W_BASE HPM_ADC1 #define BOARD_BLDC_ADC_TRIG_FLAG adc16_event_trig_complete #define BOARD_BLDC_ADC_CH_U (5U) #define BOARD_BLDC_ADC_CH_V (6U) #define BOARD_BLDC_ADC_CH_W (4U) #define BOARD_BLDC_ADC_IRQn IRQn_ADC0 #define BOARD_BLDC_ADC_PMT_DMA_SIZE_IN_4BYTES (ADC_SOC_PMT_MAX_DMA_BUFF_LEN_IN_4BYTES) #define BOARD_BLDC_ADC_TRG ADC16_CONFIG_TRG0A #define BOARD_BLDC_ADC_PREEMPT_TRIG_LEN (1U) #define BOARD_BLDC_PWM_TRIG_CMP_INDEX (8U) #define BOARD_BLDC_TRIGMUX_IN_NUM HPM_TRGM0_INPUT_SRC_PWM0_CH8REF #define BOARD_BLDC_TRG_NUM TRGM_TRGOCFG_ADCX_PTRGI0A /* USB */ #define BOARD_USB HPM_USB0 #ifndef BOARD_SHOW_CLOCK #define BOARD_SHOW_CLOCK 1 #endif #ifndef BOARD_SHOW_BANNER #define BOARD_SHOW_BANNER 1 #endif /* FreeRTOS Definitions */ #define BOARD_FREERTOS_TIMER HPM_GPTMR0 #define BOARD_FREERTOS_TIMER_CHANNEL 1 #define BOARD_FREERTOS_TIMER_IRQ IRQn_GPTMR0 #define BOARD_FREERTOS_TIMER_CLK_NAME clock_gptmr0 /* Threadx Definitions */ #define BOARD_THREADX_TIMER HPM_GPTMR0 #define BOARD_THREADX_TIMER_CHANNEL 1 #define BOARD_THREADX_TIMER_IRQ IRQn_GPTMR0 #define BOARD_THREADX_TIMER_CLK_NAME clock_gptmr0 #if defined(__cplusplus) extern "C" { #endif /* __cplusplus */ typedef void (*board_timer_cb)(void); void board_init_console(void); void board_init_gpio_pins(void); void board_init_led_pins(void); void board_init_usb_pins(void); void board_led_write(uint8_t state); void board_led_toggle(void); void board_init_uart(UART_Type *ptr); uint32_t board_init_spi_clock(SPI_Type *ptr); void board_init_spi_pins(SPI_Type *ptr); void board_usb_vbus_ctrl(uint8_t usb_index, uint8_t level); uint32_t board_init_adc16_clock(ADC16_Type *ptr, bool clk_src_ahb); void board_init_adc16_pins(void); void board_disable_output_rgb_led(uint8_t color); void board_enable_output_rgb_led(uint8_t color); void board_write_spi_cs(uint32_t pin, uint8_t state); void board_init_spi_pins_with_gpio_as_cs(SPI_Type *ptr); void board_init(void); void board_init_usb_dp_dm_pins(void); void board_init_clock(void); uint32_t board_init_gptmr_clock(GPTMR_Type *ptr); void board_delay_us(uint32_t us); void board_delay_ms(uint32_t ms); void board_timer_create(uint32_t ms, board_timer_cb cb); void board_ungate_mchtmr_at_lp_mode(void); uint8_t board_get_led_gpio_off_level(void); void board_init_pmp(void); uint32_t board_init_uart_clock(UART_Type *ptr); void board_init_i2c(I2C_Type *ptr); #if defined(__cplusplus) } #endif /* __cplusplus */ #endif /* _HPM_BOARD_H */