/**************************************************************************//** * @file ehci.h * @version V1.00 * @brief USB EHCI host controller driver header file. * @note * SPDX-License-Identifier: Apache-2.0 * Copyright (C) 2017 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef _USBH_EHCI_H_ #define _USBH_EHCI_H_ /// @cond HIDDEN_SYMBOLS struct utr_t; struct udev_t; struct qh_t; struct iso_ep_t; struct ep_info_t; /*----------------------------------------------------------------------------------------*/ /* Periodic Frame List Size (256, 512, or 1024) */ /*----------------------------------------------------------------------------------------*/ #define FL_SIZE 1024 /* frame list size can be 256, 512, or 1024 */ #define NUM_IQH 11 /* depends on FL_SIZE, 256:9, 512:10, 1024:11 */ /*----------------------------------------------------------------------------------------*/ /* Interrupt Threshold Control (1, 2, 4, 6, .. 64) */ /*----------------------------------------------------------------------------------------*/ #define UCMDR_INT_THR_CTRL (0x1< of QH */ } qTD_T; #define QTD_LIST_END 0x1 /* Indicate the terminate of qTD list. */ #define QTD_PTR(x) ((qTD_T *)((uint32_t)(x) & ~0x1F)) /* * Status: qTD Token[7:0] */ #define QTD_STS_PS_OUT (0<<0) /* directs the HC to issue an OUT PID */ #define QTD_STS_PS_PING (1<<0) /* directs the HC to issue an PING PID */ #define QTD_STS_SPLIT_STRAT (0<<1) /* directs the HC to issue an Start split */ #define QTD_STS_SPLIT_COMPLETE (1<<1) /* directs the HC to issue an Complete split */ #define QTD_STS_MISS_MF (1<<2) /* miss a required complete-split transaction */ #define QTD_STS_XactErr (1<<3) /* Transaction Error occurred */ #define QTD_STS_BABBLE (1<<4) /* Babble Detected */ #define QTD_STS_DATA_BUFF_ERR (1<<5) /* Data Buffer Error */ #define QTD_STS_HALT (1<<6) /* Halted */ #define QTD_STS_ACTIVE (1<<7) /* Active */ /* * PID: qTD Token[9:8] */ #define QTD_PID_Msk (0x3<<8) #define QTD_PID_OUT (0<<8) /* generates token (E1H) */ #define QTD_PID_IN (1<<8) /* generates token (69H) */ #define QTD_PID_SETUP (2<<8) /* generates token (2DH) */ #define QTD_ERR_COUNTER (3<<10) /* Token[11:10] */ #define QTD_IOC (1<<15) /* Token[15] - Interrupt On Complete */ #define QTD_TODO_LEN_Pos 16 /* Token[31:16] - Total Bytes to Transfer */ #define QTD_TODO_LEN(x) (((x)>>16) & 0x7FFF) #define QTD_DT (1UL<<31) /* Token[31] - Data Toggle */ /*----------------------------------------------------------------------------------------*/ /* Queue Head (QH) */ /*----------------------------------------------------------------------------------------*/ typedef struct qh_t { /* OHCI spec. Endpoint descriptor */ uint32_t HLink; /* Queue Head Horizontal Link Pointer */ uint32_t Chrst; /* Endpoint Characteristics: QH DWord 1 */ uint32_t Cap; /* Endpoint Capabilities: QH DWord 2 */ uint32_t Curr_qTD; /* Current qTD Pointer */ /* * The followings are qTD Transfer Overlay */ uint32_t OL_Next_qTD; /* Next qTD Pointer */ uint32_t OL_Alt_Next_qTD; /* Alternate Next qTD Pointer */ uint32_t OL_Token; /* qTD Token */ uint32_t OL_Bptr[5]; /* qTD Buffer Page Pointer List */ /* * The following members are used by USB Host libary. */ qTD_T *qtd_list; /* currently linked qTD transfers */ qTD_T *done_list; /* currently linked qTD transfers */ struct qh_t *next; /* point to the next QH in remove list */ } QH_T; /* HLink[0] T field of "Queue Head Horizontal Link Pointer" */ #define QH_HLNK_END 0x1 /* * HLink[2:1] Typ field of "Queue Head Horizontal Link Pointer" */ #define QH_HLNK_ITD(x) (((uint32_t)(x) & ~0x1F) | 0x0) #define QH_HLNK_QH(x) (((uint32_t)(x) & ~0x1F) | 0x2) #define QH_HLNK_SITD(x) (((uint32_t)(x) & ~0x1F) | 0x4) #define QH_HLNK_FSTN(x) (((uint32_t)(x) & ~0x1F) | 0x6) #define QH_PTR(x) ((QH_T *)((uint32_t)(x) & ~0x1F)) /* * Bit fields of "Endpoint Characteristics" */ #define QH_NAK_RL (4L<<28) /* Chrst[31:28] - NAK Count Reload */ #define QH_CTRL_EP_FLAG (1<<27) /* Chrst[27] - Control Endpoint Flag */ #define QH_RCLM_LIST_HEAD (1<<15) /* Chrst[15] - Head of Reclamation List Flag */ #define QH_DTC (1<<14) /* Chrst[14] - Data Toggle Control */ #define QH_EPS_FULL (0<<12) /* Chrst[13:12] - Endpoint Speed (Full) */ #define QH_EPS_LOW (1<<12) /* Chrst[13:12] - Endpoint Speed (Low) */ #define QH_EPS_HIGH (2<<12) /* Chrst[13:12] - Endpoint Speed (High) */ #define QH_I_NEXT (1<<7) /* Chrst[7] - Inactivate on Next Transaction */ /* * Bit fields of "Endpoint Capabilities" */ #define QH_MULT_Pos 30 /* Cap[31:30] - High-Bandwidth Pipe Multiplier */ #define QH_HUB_PORT_Pos 23 /* Cap[29:23] - Hub Port Number */ #define QH_HUB_ADDR_Pos 16 /* Cap[22:16] - Hub Addr */ #define QH_C_MASK_Msk 0xFF00 /* Cap[15:8] - uFrame C-mask */ #define QH_S_MASK_Msk 0x00FF /* Cap[7:0] - uFrame S-mask */ /*----------------------------------------------------------------------------------------*/ /* Isochronous (High-Speed) Transfer Descriptor (iTD) */ /*----------------------------------------------------------------------------------------*/ typedef struct itd_t { uint32_t Next_Link; /* Next Link Pointer */ uint32_t Transaction[8]; /* Transaction Status and Control */ uint32_t Bptr[7]; /* Buffer Page Pointer List */ /* * The following members are used by USB Host libary. */ struct iso_ep_t *iso_ep; /* associated isochronous information block */ struct utr_t *utr; /* associated UTR */ uint32_t buff_base; /* buffer base address */ uint8_t fidx; /* iTD's first index to UTR iso frames */ uint8_t trans_mask; /* mask of activated transactions in iTD */ uint32_t sched_frnidx; /* scheduled frame index */ struct itd_t *next; /* used by software to maintain iTD list */ } iTD_T; /* * Next_Link[2:1] Typ field of "Next Schedule Element Pointer" Typ field */ #define ITD_HLNK_ITD(x) (((uint32_t)(x) & ~0x1F) | 0x0) #define ITD_HLNK_QH(x) (((uint32_t)(x) & ~0x1F) | 0x2) #define ITD_HLNK_SITD(x) (((uint32_t)(x) & ~0x1F) | 0x4) #define ITD_HLNK_FSTN(x) (((uint32_t)(x) & ~0x1F) | 0x6) #define ITD_PTR(x) ((iTD_T *)((uint32_t)(x) & ~0x1F)) /* * Transaction[8] */ #define ITD_STATUS(x) (((x)>>28)&0xF) #define ITD_STATUS_ACTIVE (0x80000000UL) /* Active */ #define ITD_STATUS_BUFF_ERR (0x40000000UL) /* Data Buffer Error */ #define ITD_STATUS_BABBLE (0x20000000UL) /* Babble Detected */ #define ITD_STATUS_XACT_ERR (0x10000000UL) /* Transcation Error */ #define ITD_XLEN_Pos 16 #define ITD_XFER_LEN(x) (((x)>>16)&0xFFF) #define ITD_IOC (1<<15) #define ITD_PG_Pos 12 #define ITD_XFER_OFF_Msk 0xFFF /* * Bptr[7] */ #define ITD_BUFF_PAGE_Pos 12 /* Bptr[0] */ #define ITD_EP_NUM_Pos 8 #define ITD_EP_NUM(itd) (((itd)->Bptr[0]>>8)&0xF) #define ITD_DEV_ADDR_Pos 0 #define ITD_DEV_ADDR(itd) ((itd)->Bptr[0]&0x7F) /* Bptr[1] */ #define ITD_DIR_IN (1<<11) #define ITD_DIR_OUT (0<<11) #define ITD_MAX_PKTSZ_Pos 0 #define ITD_MAX_PKTSZ(itd) ((itd)->Bptr[1]&0x7FF) /*----------------------------------------------------------------------------------------*/ /* Split Isochronous (Full-Speed) Transfer Descriptor (siTD) */ /*----------------------------------------------------------------------------------------*/ typedef struct sitd_t { uint32_t Next_Link; /* Next Link Pointer */ uint32_t Chrst; /* Endpoint and Transaction Translator Characteristics */ uint32_t Sched; /* Micro-frame Schedule Control */ uint32_t StsCtrl; /* siTD Transfer Status and Control */ uint32_t Bptr[2]; /* Buffer Page Pointer List */ uint32_t BackLink; /* siTD Back Link Pointer */ /* * The following members are used by USB Host libary. */ struct iso_ep_t *iso_ep; /* associated isochronous information block */ struct utr_t *utr; /* associated UTR */ uint8_t fidx; /* iTD's first index to UTR iso frames */ uint32_t sched_frnidx; /* scheduled frame index */ struct sitd_t *next; /* used by software to maintain siTD list */ } siTD_T; #define SITD_LIST_END 0x1 /* Indicate the terminate of siTD list. */ #define SITD_XFER_IO_Msk (1UL<<31) #define SITD_XFER_IN (1UL<<31) #define SITD_XFER_OUT (0UL<<31) #define SITD_PORT_NUM_Pos 24 #define SITD_HUB_ADDR_Pos 16 #define SITD_EP_NUM_Pos 8 #define SITD_DEV_ADDR_Pos 0 #define SITD_IOC (1UL<<31) #define SITD_XFER_CNT_Pos 16 #define SITD_XFER_CNT_Msk (0x3FF<