/**************************************************************************//** * @file USCI_I2C.h * @version V3.0 * @brief M460 series USCI I2C(UI2C) driver header file * * @copyright SPDX-License-Identifier: Apache-2.0 * @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved. ******************************************************************************/ #ifndef __NU_USCI_I2C_H__ #define __NU_USCI_I2C_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup Standard_Driver Standard Driver @{ */ /** @addtogroup USCI_I2C_Driver USCI_I2C Driver @{ */ /** @addtogroup USCI_I2C_EXPORTED_CONSTANTS USCI_I2C Exported Constants @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* USCI_I2C master event definitions */ /*---------------------------------------------------------------------------------------------------------*/ enum UI2C_MASTER_EVENT { MASTER_SEND_ADDRESS = 10, /*!< Master send address to Slave */ MASTER_SEND_H_WR_ADDRESS, /*!< Master send High address to Slave */ MASTER_SEND_H_RD_ADDRESS, /*!< Master send address to Slave (Read ADDR) */ MASTER_SEND_L_ADDRESS, /*!< Master send Low address to Slave */ MASTER_SEND_DATA, /*!< Master Send Data to Slave */ MASTER_SEND_REPEAT_START, /*!< Master send repeat start to Slave */ MASTER_READ_DATA, /*!< Master Get Data from Slave */ MASTER_STOP, /*!< Master send stop to Slave */ MASTER_SEND_START /*!< Master send start to Slave */ }; /*---------------------------------------------------------------------------------------------------------*/ /* USCI_I2C slave event definitions */ /*---------------------------------------------------------------------------------------------------------*/ enum UI2C_SLAVE_EVENT { SLAVE_ADDRESS_ACK = 100, /*!< Slave send address ACK */ SLAVE_H_WR_ADDRESS_ACK, /*!< Slave send High address ACK */ SLAVE_L_WR_ADDRESS_ACK, /*!< Slave send Low address ACK */ SLAVE_GET_DATA, /*!< Slave Get Data from Master (Write CMD) */ SLAVE_SEND_DATA, /*!< Slave Send Data to Master (Read CMD) */ SLAVE_H_RD_ADDRESS_ACK, /*!< Slave send High address ACK */ SLAVE_L_RD_ADDRESS_ACK /*!< Slave send Low address ACK */ }; /*---------------------------------------------------------------------------------------------------------*/ /* USCI_CTL constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define UI2C_CTL_PTRG 0x20UL /*!< USCI_CTL setting for I2C control bits. It would set PTRG bit \hideinitializer */ #define UI2C_CTL_STA 0x08UL /*!< USCI_CTL setting for I2C control bits. It would set STA bit \hideinitializer */ #define UI2C_CTL_STO 0x04UL /*!< USCI_CTL setting for I2C control bits. It would set STO bit \hideinitializer */ #define UI2C_CTL_AA 0x02UL /*!< USCI_CTL setting for I2C control bits. It would set AA bit \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* USCI_I2C GCMode constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define UI2C_GCMODE_ENABLE (1U) /*!< Enable USCI_I2C GC Mode \hideinitializer */ #define UI2C_GCMODE_DISABLE (0U) /*!< Disable USCI_I2C GC Mode \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* USCI_I2C Wakeup Mode constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define UI2C_DATA_TOGGLE_WK (0x0U << UI2C_WKCTL_WKADDREN_Pos) /*!< Wakeup according data toggle \hideinitializer */ #define UI2C_ADDR_MATCH_WK (0x1U << UI2C_WKCTL_WKADDREN_Pos) /*!< Wakeup according address match \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* USCI_I2C interrupt mask definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define UI2C_TO_INT_MASK (0x001U) /*!< Time-out interrupt mask \hideinitializer */ #define UI2C_STAR_INT_MASK (0x002U) /*!< Start condition received interrupt mask \hideinitializer */ #define UI2C_STOR_INT_MASK (0x004U) /*!< Stop condition received interrupt mask \hideinitializer */ #define UI2C_NACK_INT_MASK (0x008U) /*!< Non-acknowledge interrupt mask \hideinitializer */ #define UI2C_ARBLO_INT_MASK (0x010U) /*!< Arbitration lost interrupt mask \hideinitializer */ #define UI2C_ERR_INT_MASK (0x020U) /*!< Error interrupt mask \hideinitializer */ #define UI2C_ACK_INT_MASK (0x040U) /*!< Acknowledge interrupt mask \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* USCI_I2C Time-out Handler Constant Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define UI2C_TIMEOUT SystemCoreClock /*!< 1 second time-out \hideinitializer */ #define UI2C_TIMEOUT_ERR (-1L) /*!< UI2C operation abort due to timeout error \hideinitializer */ /*@}*/ /* end of group USCI_I2C_EXPORTED_CONSTANTS */ extern int32_t g_UI2C_i32ErrCode; /** @addtogroup USCI_I2C_EXPORTED_FUNCTIONS USCI_I2C Exported Functions @{ */ /** * @brief This macro sets the USCI_I2C protocol control register at one time * * @param[in] ui2c The pointer of the specified USCI_I2C module. * @param[in] u8Ctrl Set the register value of USCI_I2C control register. * * @return None * * @details Set UI2C_PROTCTL register to control USCI_I2C bus conditions of START, STOP, SI, ACK. * \hideinitializer */ #define UI2C_SET_CONTROL_REG(ui2c, u8Ctrl) ((ui2c)->PROTCTL = ((ui2c)->PROTCTL & ~0x2EU) | (u8Ctrl)) /** * @brief This macro only set START bit to protocol control register of USCI_I2C module. * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @return None * * @details Set the USCI_I2C bus START condition in UI2C_PROTCTL register. * \hideinitializer */ #define UI2C_START(ui2c) ((ui2c)->PROTCTL = ((ui2c)->PROTCTL & ~UI2C_PROTCTL_PTRG_Msk) | UI2C_PROTCTL_STA_Msk) /** * @brief This macro only set STOP bit to the control register of USCI_I2C module * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @return None * * @details Set the USCI_I2C bus STOP condition in UI2C_PROTCTL register. * \hideinitializer */ #define UI2C_STOP(ui2c) ((ui2c)->PROTCTL = ((ui2c)->PROTCTL & ~0x2E) | (UI2C_PROTCTL_PTRG_Msk | UI2C_PROTCTL_STO_Msk)) /** * @brief This macro returns the data stored in data register of USCI_I2C module * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @return Data * * @details Read a byte data value of UI2C_RXDAT register from USCI_I2C bus * \hideinitializer */ #define UI2C_GET_DATA(ui2c) ((ui2c)->RXDAT) /** * @brief This macro writes the data to data register of USCI_I2C module * * @param[in] ui2c The pointer of the specified USCI_I2C module. * @param[in] u8Data The data which will be written to data register of USCI_I2C module. * * @return None * * @details Write a byte data value of UI2C_TXDAT register, then sends address or data to USCI I2C bus * \hideinitializer */ #define UI2C_SET_DATA(ui2c, u8Data) ((ui2c)->TXDAT = (u8Data)) /** * @brief This macro returns time-out flag * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @retval 0 USCI_I2C bus time-out is not happened * @retval 1 USCI_I2C bus time-out is happened * * @details USCI_I2C bus occurs time-out event, the time-out flag will be set. If not occurs time-out event, this bit is cleared. * \hideinitializer */ #define UI2C_GET_TIMEOUT_FLAG(ui2c) (((ui2c)->PROTSTS & UI2C_PROTSTS_TOIF_Msk) == UI2C_PROTSTS_TOIF_Msk ? 1:0) /** * @brief This macro returns wake-up flag * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @retval 0 Chip is not woken-up from power-down mode * @retval 1 Chip is woken-up from power-down mode * * @details USCI_I2C controller wake-up flag will be set when USCI_I2C bus occurs wake-up from deep-sleep. * \hideinitializer */ #define UI2C_GET_WAKEUP_FLAG(ui2c) (((ui2c)->WKSTS & UI2C_WKSTS_WKF_Msk) == UI2C_WKSTS_WKF_Msk ? 1:0) /** * @brief This macro is used to clear USCI_I2C wake-up flag * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @return None * * @details If USCI_I2C wake-up flag is set, use this macro to clear it. * \hideinitializer */ #define UI2C_CLR_WAKEUP_FLAG(ui2c) ((ui2c)->WKSTS = UI2C_WKSTS_WKF_Msk) /** * @brief This macro disables the USCI_I2C 10-bit address mode * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @return None * * @details The UI2C_I2C is 7-bit address mode, when disable USCI_I2C 10-bit address match function. * \hideinitializer */ #define UI2C_DISABLE_10BIT_ADDR_MODE(ui2c) ((ui2c)->PROTCTL &= ~(UI2C_PROTCTL_ADDR10EN_Msk)) /** * @brief This macro enables the 10-bit address mode * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @return None * * @details To enable USCI_I2C 10-bit address match function. * \hideinitializer */ #define UI2C_ENABLE_10BIT_ADDR_MODE(ui2c) ((ui2c)->PROTCTL |= UI2C_PROTCTL_ADDR10EN_Msk) /** * @brief This macro gets USCI_I2C protocol interrupt flag or bus status * * @param[in] ui2c The pointer of the specified USCI_I2C module. * * @return A word data of USCI_I2C_PROTSTS register * * @details Read a word data of USCI_I2C PROTSTS register to get USCI_I2C bus Interrupt flags or status. * \hideinitializer */ #define UI2C_GET_PROT_STATUS(ui2c) ((ui2c)->PROTSTS) /** * @brief This macro clears specified protocol interrupt flag * @param[in] ui2c The pointer of the specified USCI_I2C module. * @param[in] u32IntTypeFlag Interrupt Type Flag, should be * - \ref UI2C_PROTSTS_ACKIF_Msk * - \ref UI2C_PROTSTS_ERRIF_Msk * - \ref UI2C_PROTSTS_ARBLOIF_Msk * - \ref UI2C_PROTSTS_NACKIF_Msk * - \ref UI2C_PROTSTS_STORIF_Msk * - \ref UI2C_PROTSTS_STARIF_Msk * - \ref UI2C_PROTSTS_TOIF_Msk * @return None * * @details To clear interrupt flag when USCI_I2C occurs interrupt and set interrupt flag. * \hideinitializer */ #define UI2C_CLR_PROT_INT_FLAG(ui2c,u32IntTypeFlag) ((ui2c)->PROTSTS = (u32IntTypeFlag)) /** * @brief This macro enables specified protocol interrupt * @param[in] ui2c The pointer of the specified USCI_I2C module. * @param[in] u32IntSel Interrupt Type, should be * - \ref UI2C_PROTIEN_ACKIEN_Msk * - \ref UI2C_PROTIEN_ERRIEN_Msk * - \ref UI2C_PROTIEN_ARBLOIEN_Msk * - \ref UI2C_PROTIEN_NACKIEN_Msk * - \ref UI2C_PROTIEN_STORIEN_Msk * - \ref UI2C_PROTIEN_STARIEN_Msk * - \ref UI2C_PROTIEN_TOIEN_Msk * @return None * * @details Set specified USCI_I2C protocol interrupt bits to enable interrupt function. * \hideinitializer */ #define UI2C_ENABLE_PROT_INT(ui2c, u32IntSel) ((ui2c)->PROTIEN |= (u32IntSel)) /** * @brief This macro disables specified protocol interrupt * @param[in] ui2c The pointer of the specified USCI_I2C module. * @param[in] u32IntSel Interrupt Type, should be * - \ref UI2C_PROTIEN_ACKIEN_Msk * - \ref UI2C_PROTIEN_ERRIEN_Msk * - \ref UI2C_PROTIEN_ARBLOIEN_Msk * - \ref UI2C_PROTIEN_NACKIEN_Msk * - \ref UI2C_PROTIEN_STORIEN_Msk * - \ref UI2C_PROTIEN_STARIEN_Msk * - \ref UI2C_PROTIEN_TOIEN_Msk * @return None * * @details Clear specified USCI_I2C protocol interrupt bits to disable interrupt function. * \hideinitializer */ #define UI2C_DISABLE_PROT_INT(ui2c, u32IntSel) ((ui2c)->PROTIEN &= ~ (u32IntSel)) uint32_t UI2C_Open(UI2C_T *ui2c, uint32_t u32BusClock); void UI2C_Close(UI2C_T *ui2c); void UI2C_ClearTimeoutFlag(UI2C_T *ui2c); void UI2C_Trigger(UI2C_T *ui2c, uint8_t u8Start, uint8_t u8Stop, uint8_t u8Ptrg, uint8_t u8Ack); void UI2C_DisableInt(UI2C_T *ui2c, uint32_t u32Mask); void UI2C_EnableInt(UI2C_T *ui2c, uint32_t u32Mask); uint32_t UI2C_GetBusClockFreq(UI2C_T *ui2c); uint32_t UI2C_SetBusClockFreq(UI2C_T *ui2c, uint32_t u32BusClock); uint32_t UI2C_GetIntFlag(UI2C_T *ui2c, uint32_t u32Mask); void UI2C_ClearIntFlag(UI2C_T *ui2c, uint32_t u32Mask); uint32_t UI2C_GetData(UI2C_T *ui2c); void UI2C_SetData(UI2C_T *ui2c, uint8_t u8Data); void UI2C_SetSlaveAddr(UI2C_T *ui2c, uint8_t u8SlaveNo, uint16_t u16SlaveAddr, uint8_t u8GCMode); void UI2C_SetSlaveAddrMask(UI2C_T *ui2c, uint8_t u8SlaveNo, uint16_t u16SlaveAddrMask); void UI2C_EnableTimeout(UI2C_T *ui2c, uint32_t u32TimeoutCnt); void UI2C_DisableTimeout(UI2C_T *ui2c); void UI2C_EnableWakeup(UI2C_T *ui2c, uint8_t u8WakeupMode); void UI2C_DisableWakeup(UI2C_T *ui2c); uint8_t UI2C_WriteByte(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint8_t data); uint32_t UI2C_WriteMultiBytes(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint8_t *data, uint32_t u32wLen); uint8_t UI2C_WriteByteOneReg(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint8_t u8DataAddr, uint8_t data); uint32_t UI2C_WriteMultiBytesOneReg(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint8_t u8DataAddr, uint8_t *data, uint32_t u32wLen); uint8_t UI2C_WriteByteTwoRegs(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint16_t u16DataAddr, uint8_t data); uint32_t UI2C_WriteMultiBytesTwoRegs(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint16_t u16DataAddr, uint8_t *data, uint32_t u32wLen); uint8_t UI2C_ReadByte(UI2C_T *ui2c, uint8_t u8SlaveAddr); uint32_t UI2C_ReadMultiBytes(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint8_t *rdata, uint32_t u32rLen); uint8_t UI2C_ReadByteOneReg(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint8_t u8DataAddr); uint32_t UI2C_ReadMultiBytesOneReg(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint8_t u8DataAddr, uint8_t *rdata, uint32_t u32rLen); uint8_t UI2C_ReadByteTwoRegs(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint16_t u16DataAddr); uint32_t UI2C_ReadMultiBytesTwoRegs(UI2C_T *ui2c, uint8_t u8SlaveAddr, uint16_t u16DataAddr, uint8_t *rdata, uint32_t u32rLen); /*@}*/ /* end of group USCI_I2C_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group USCI_I2C_Driver */ /*@}*/ /* end of group Standard_Driver */ #ifdef __cplusplus } #endif #endif