/*
 * File      : synopGMAC.c
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) chinesebear
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Change Logs:
 * Date           Author       Notes
 * 2017-08-24     chinesebear  first version
 */


#include <rtthread.h>
#include <rtdef.h>
//#include <lwip/pbuf.h>

#include "synopGMAC.h"
#include "mii.c"
#include "synopGMAC_debug.h"
#include <ls1c.h>
#define RMII

#define Gmac_base			0xbfe10000
#define Buffer_Size         2048
#define MAX_ADDR_LEN		6
#define NAMESIZE			16

#define LS1B_GMAC0_IRQ		34
#define BUS_SIZE_ALIGN(x) ((x+15)&~15)

#define DEFAULT_MAC_ADDRESS {0x00, 0x55, 0x7B, 0xB5, 0x7D, 0xF7}

u32 regbase = 0xbfe10000;   
static u32 GMAC_Power_down;
extern void *plat_alloc_consistent_dmaable_memory(synopGMACdevice *pcidev, u32 size, u32 *addr) ;
extern s32 synopGMAC_check_phy_init (synopGMACPciNetworkAdapter *adapter) ;
extern int init_phy(synopGMACdevice *gmacdev);
dma_addr_t plat_dma_map_single(void *hwdev, void *ptr,u32 size);

void eth_rx_irq(int irqno,void *param);
static char Rx_Buffer[Buffer_Size];
static char Tx_Buffer[Buffer_Size];

struct rt_eth_dev
{
	struct eth_device parent;
	rt_uint8_t dev_addr[MAX_ADDR_LEN];
	char *name;
	int iobase;
	int state;
	int index;
	struct rt_timer link_timer;
	struct rt_timer	rx_poll_timer;
	void *priv;
};
static struct rt_eth_dev eth_dev;
static struct rt_semaphore sem_ack, sem_lock;

/**
 * This sets up the transmit Descriptor queue in ring or chain mode.
 * This function is tightly coupled to the platform and operating system
 * Device is interested only after the descriptors are setup. Therefore this function
 * is not included in the device driver API. This function should be treated as an
 * example code to design the descriptor structures for ring mode or chain mode.
 * This function depends on the pcidev structure for allocation consistent dma-able memory in case
 * of linux.
 * This limitation is due to the fact that linux uses pci structure to allocate a dmable memory
 * - Allocates the memory for the descriptors.
 * - Initialize the Busy and Next descriptors indices to 0(Indicating first descriptor).
 * - Initialize the Busy and Next descriptors to first descriptor address.
 * - Initialize the last descriptor with the endof ring in case of ring mode.
 * - Initialize the descriptors in chain mode.
 * @param[in] pointer to synopGMACdevice.
 * @param[in] pointer to pci_device structure.
 * @param[in] number of descriptor expected in tx descriptor queue.
 * @param[in] whether descriptors to be created in RING mode or CHAIN mode.
 * \return 0 upon success. Error code upon failure.
 * \note This function fails if allocation fails for required number of descriptors in Ring mode,
 * but in chain mode
 * function returns -ESYNOPGMACNOMEM in the process of descriptor chain creation. once returned from
 * this function
 * user should for gmacdev->TxDescCount to see how many descriptors are there in the chain. Should
 * continue further
 * only if the number of descriptors in the chain meets the requirements
 */
s32 synopGMAC_setup_tx_desc_queue(synopGMACdevice * gmacdev,u32 no_of_desc, u32 desc_mode)
{
	s32 i;
	DmaDesc * bf1;

	DmaDesc *first_desc = NULL;

	dma_addr_t dma_addr;
	gmacdev->TxDescCount = 0;

	first_desc = (DmaDesc *)plat_alloc_consistent_dmaable_memory (gmacdev, sizeof(DmaDesc) * no_of_desc,&dma_addr);
	if(first_desc == NULL){
		rt_kprintf("Error in Tx Descriptors memory allocation\n");
		return -ESYNOPGMACNOMEM;
	}

	DEBUG_MES("tx_first_desc_addr = %p\n", first_desc);
	DEBUG_MES("dmaadr = %p\n", dma_addr);
	gmacdev->TxDescCount = no_of_desc;
	gmacdev->TxDesc      = first_desc;
	gmacdev->TxDescDma  = dma_addr;

	for(i =0; i < gmacdev->TxDescCount; i++){
		synopGMAC_tx_desc_init_ring(gmacdev->TxDesc + i, i == gmacdev->TxDescCount-1);
#if SYNOP_TOP_DEBUG
		rt_kprintf("\n%02d %08x \n",i,(unsigned int)(gmacdev->TxDesc + i));
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i))->status);
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i)->length));
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i)->buffer1));
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i)->buffer2));
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i)->data1));
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i)->data2));
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i)->dummy1));
		rt_kprintf("%08x ",(unsigned int)((gmacdev->TxDesc + i)->dummy2));
#endif
	}

	gmacdev->TxNext = 0;
	gmacdev->TxBusy = 0;
	gmacdev->TxNextDesc = gmacdev->TxDesc;
	gmacdev->TxBusyDesc = gmacdev->TxDesc;
	gmacdev->BusyTxDesc  = 0; 

	return -ESYNOPGMACNOERR;
}

/**
 * This sets up the receive Descriptor queue in ring or chain mode.
 * This function is tightly coupled to the platform and operating system
 * Device is interested only after the descriptors are setup. Therefore this function
 * is not included in the device driver API. This function should be treated as an
 * example code to design the descriptor structures in ring mode or chain mode.
 * This function depends on the pcidev structure for allocation of consistent dma-able memory in
 * case of linux.
 * This limitation is due to the fact that linux uses pci structure to allocate a dmable memory
 * - Allocates the memory for the descriptors.
 * - Initialize the Busy and Next descriptors indices to 0(Indicating first descriptor).
 * - Initialize the Busy and Next descriptors to first descriptor address.
 * - Initialize the last descriptor with the endof ring in case of ring mode.
 * - Initialize the descriptors in chain mode.
 * @param[in] pointer to synopGMACdevice.
 * @param[in] pointer to pci_device structure.
 * @param[in] number of descriptor expected in rx descriptor queue.
 * @param[in] whether descriptors to be created in RING mode or CHAIN mode.
 * \return 0 upon success. Error code upon failure.
 * \note This function fails if allocation fails for required number of descriptors in Ring mode,
 * but in chain mode
 * function returns -ESYNOPGMACNOMEM in the process of descriptor chain creation. once returned from
 * this function
 * user should for gmacdev->RxDescCount to see how many descriptors are there in the chain. Should
 * continue further
 * only if the number of descriptors in the chain meets the requirements  
 */ 
s32 synopGMAC_setup_rx_desc_queue(synopGMACdevice * gmacdev,u32 no_of_desc, u32 desc_mode)
{
	s32 i;
	DmaDesc * bf1;
	DmaDesc *first_desc = NULL;

	dma_addr_t dma_addr;

	gmacdev->RxDescCount = 0;
	first_desc =(DmaDesc *)plat_alloc_consistent_dmaable_memory (gmacdev, sizeof(DmaDesc) * no_of_desc, &dma_addr);
	if(first_desc == NULL){
		rt_kprintf("Error in Rx Descriptor Memory allocation in Ring mode\n");
		return -ESYNOPGMACNOMEM;
	}

	DEBUG_MES("rx_first_desc_addr = %p\n", first_desc);
	DEBUG_MES("dmaadr = %p\n", dma_addr);
	gmacdev->RxDescCount = no_of_desc;
	gmacdev->RxDesc      = (DmaDesc *)first_desc;
	gmacdev->RxDescDma   = dma_addr;

	for(i =0; i < gmacdev->RxDescCount; i++){
		synopGMAC_rx_desc_init_ring(gmacdev->RxDesc + i, i == gmacdev->RxDescCount-1);

	}

	gmacdev->RxNext = 0;
	gmacdev->RxBusy = 0;
	gmacdev->RxNextDesc = gmacdev->RxDesc;
	gmacdev->RxBusyDesc = gmacdev->RxDesc;

	gmacdev->BusyRxDesc   = 0;

	return -ESYNOPGMACNOERR;
}

void synopGMAC_linux_cable_unplug_function(void *adaptr)
{
	s32 data;
	synopGMACPciNetworkAdapter *adapter = (synopGMACPciNetworkAdapter *)adaptr;
	synopGMACdevice            *gmacdev = adapter->synopGMACdev;
	struct ethtool_cmd cmd;

	//rt_kprintf("%s\n",__FUNCTION__);
	if(!mii_link_ok(&adapter->mii)){
		if(gmacdev->LinkState)
			rt_kprintf("\r\nNo Link\r\n");
		gmacdev->DuplexMode = 0;
		gmacdev->Speed = 0;
		gmacdev->LoopBackMode = 0;
		gmacdev->LinkState = 0;
	}
	else{
		data = synopGMAC_check_phy_init(adapter);

		if(gmacdev->LinkState != data){
			gmacdev->LinkState = data;
			synopGMAC_mac_init(gmacdev);
			rt_kprintf("Link is up in %s mode\n",(gmacdev->DuplexMode == FULLDUPLEX) ? "FULL DUPLEX": "HALF DUPLEX");
			if(gmacdev->Speed == SPEED1000)
				rt_kprintf("Link is with 1000M Speed \r\n");
			if(gmacdev->Speed == SPEED100)
				rt_kprintf("Link is with 100M Speed \n");
			if(gmacdev->Speed == SPEED10)
				rt_kprintf("Link is with 10M Speed \n");
		}
	}
}

s32 synopGMAC_check_phy_init (synopGMACPciNetworkAdapter *adapter) 
{   
	struct ethtool_cmd cmd; 
	synopGMACdevice            *gmacdev = adapter->synopGMACdev;

	if(!mii_link_ok(&adapter->mii))
	{    
		gmacdev->DuplexMode = FULLDUPLEX;
		gmacdev->Speed      =   SPEED100;

		return 0;
	}    
	else 
	{    
		mii_ethtool_gset(&adapter->mii, &cmd);

		gmacdev->DuplexMode = (cmd.duplex == DUPLEX_FULL)  ? FULLDUPLEX: HALFDUPLEX ;
		if(cmd.speed == SPEED_1000)
			gmacdev->Speed      =   SPEED1000;
		else if(cmd.speed == SPEED_100)
			gmacdev->Speed      =   SPEED100;
		else 
			gmacdev->Speed      =   SPEED10;
	}    

	return gmacdev->Speed|(gmacdev->DuplexMode<<4);
}


static int Mac_change_check(u8 *macaddr0, u8 *macaddr1)
{
	int i;
	for(i = 0; i < 6; i++){
		if(macaddr0[i] != macaddr1[i])
		return 1; 
	}
	return 0;
}

static rt_err_t eth_init(rt_device_t device )
{
	struct eth_device *eth_device = (struct eth_device *)device;
	RT_ASSERT(eth_device != RT_NULL);

	s32 ijk;
	s32 status = 0;
	u64 dma_addr;
	u32 Mac_changed = 0;
	struct pbuf *pbuf; 
	u8 macaddr[6] = DEFAULT_MAC_ADDRESS;
	struct rt_eth_dev *dev = &eth_dev;
	struct synopGMACNetworkAdapter *adapter = dev->priv;
	synopGMACdevice * gmacdev = (synopGMACdevice *)adapter->synopGMACdev;

	synopGMAC_reset(gmacdev);
	synopGMAC_attach(gmacdev,(regbase + MACBASE),(regbase + DMABASE), DEFAULT_PHY_BASE, macaddr);

	synopGMAC_read_version(gmacdev);

	synopGMAC_set_mdc_clk_div(gmacdev,GmiiCsrClk3);
    gmacdev->ClockDivMdc = synopGMAC_get_mdc_clk_div(gmacdev);

	init_phy(adapter->synopGMACdev);

	rt_kprintf("tx desc_queue\n");
	synopGMAC_setup_tx_desc_queue(gmacdev,TRANSMIT_DESC_SIZE, RINGMODE);
	synopGMAC_init_tx_desc_base(gmacdev);

	rt_kprintf("rx desc_queue\n");
	synopGMAC_setup_rx_desc_queue(gmacdev,RECEIVE_DESC_SIZE, RINGMODE);
	synopGMAC_init_rx_desc_base(gmacdev);
	DEBUG_MES("DmaRxBaseAddr = %08x\n",synopGMACReadReg(gmacdev->DmaBase,DmaRxBaseAddr));

//	u32 dmaRx_Base_addr = synopGMACReadReg(gmacdev->DmaBase,DmaRxBaseAddr);
//	rt_kprintf("first_desc_addr = 0x%x\n", dmaRx_Base_addr);

#ifdef ENH_DESC_8W
	synopGMAC_dma_bus_mode_init(gmacdev, DmaBurstLength32 | DmaDescriptorSkip2 | DmaDescriptor8Words );
#else
	//synopGMAC_dma_bus_mode_init(gmacdev, DmaBurstLength4 | DmaDescriptorSkip1);                   
	synopGMAC_dma_bus_mode_init(gmacdev, DmaBurstLength4 | DmaDescriptorSkip2);                   
#endif
	synopGMAC_dma_control_init(gmacdev,DmaStoreAndForward |DmaTxSecondFrame|DmaRxThreshCtrl128);

	status = synopGMAC_check_phy_init(adapter);
	synopGMAC_mac_init(gmacdev);

	synopGMAC_pause_control(gmacdev);

#ifdef IPC_OFFLOAD
	synopGMAC_enable_rx_chksum_offload(gmacdev); 
	synopGMAC_rx_tcpip_chksum_drop_enable(gmacdev);
#endif

	u32 skb;
	do{
		skb = (u32)plat_alloc_memory(RX_BUF_SIZE);      //should skb aligned here?
		if(skb == RT_NULL){
			rt_kprintf("ERROR in skb buffer allocation\n");
			break;
		}

		dma_addr = plat_dma_map_single(gmacdev,(void *)skb,RX_BUF_SIZE);	//获取 skb 的 dma 地址

		status = synopGMAC_set_rx_qptr(gmacdev,dma_addr,RX_BUF_SIZE,(u32)skb,0,0,0);
		if(status < 0) 
		{
			rt_kprintf("status < 0!!\n");
			plat_free_memory((void *)skb);
		}
	}while(status >= 0 && (status < (RECEIVE_DESC_SIZE - 1)));
    
	synopGMAC_clear_interrupt(gmacdev);

	synopGMAC_disable_mmc_tx_interrupt(gmacdev, 0xFFFFFFFF);
	synopGMAC_disable_mmc_rx_interrupt(gmacdev, 0xFFFFFFFF);
	synopGMAC_disable_mmc_ipc_rx_interrupt(gmacdev, 0xFFFFFFFF);

//	synopGMAC_disable_interrupt_all(gmacdev);
	synopGMAC_enable_interrupt(gmacdev, DmaIntEnable);
	synopGMAC_enable_dma_rx(gmacdev);
	synopGMAC_enable_dma_tx(gmacdev);

	plat_delay(DEFAULT_LOOP_VARIABLE);
	synopGMAC_check_phy_init(adapter);
	synopGMAC_mac_init(gmacdev);

	rt_timer_init(&dev->link_timer, "link_timer",
			synopGMAC_linux_cable_unplug_function,
			(void *)adapter,
			RT_TICK_PER_SECOND,
			RT_TIMER_FLAG_PERIODIC);

	rt_timer_start(&dev->link_timer);
#ifdef RT_USING_GMAC_INT_MODE
	/* installl isr */
	DEBUG_MES("%s\n", __FUNCTION__);
	rt_hw_interrupt_install(LS1C_MAC_IRQ, eth_rx_irq, RT_NULL, "e0_isr");
	rt_hw_interrupt_umask(LS1C_MAC_IRQ);
#else
	rt_timer_init(&dev->rx_poll_timer, "rx_poll_timer",
			eth_rx_irq,
			(void *)adapter,
			1,
			RT_TIMER_FLAG_PERIODIC);

	rt_timer_start(&dev->rx_poll_timer);
#endif	/*RT_USING_GMAC_INT_MODE*/

	rt_kprintf("eth_inited!\n");

	return RT_EOK;
}

static rt_err_t eth_open(rt_device_t dev, rt_uint16_t oflag)
{
	rt_kprintf("eth_open!!\n");

	return RT_EOK;
}

static rt_err_t eth_close(rt_device_t dev)
{
	return RT_EOK;
}

static rt_size_t eth_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
	rt_set_errno(-RT_ENOSYS);
	return 0;   
}

static rt_size_t eth_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
	rt_set_errno(-RT_ENOSYS);
	return 0;   
}

static rt_err_t eth_control(rt_device_t dev, int cmd, void *args)
{
	switch (cmd)
	{
		case NIOCTL_GADDR:
			if(args) rt_memcpy(args, eth_dev.dev_addr, 6);
			else return -RT_ERROR;
			break;

		default :
			break;
	}
	return RT_EOK;
}

rt_err_t rt_eth_tx(rt_device_t device, struct pbuf* p)
{
	/* lock eth device */
	rt_sem_take(&sem_lock, RT_WAITING_FOREVER);

	DEBUG_MES("in %s\n", __FUNCTION__);

	s32 status;
	u32 pbuf;
	u64 dma_addr;
	u32 offload_needed = 0;
	u32 index;
	DmaDesc * dpr;
	struct rt_eth_dev *dev = (struct rt_eth_dev *) device;
	struct synopGMACNetworkAdapter *adapter;
	synopGMACdevice * gmacdev;
	adapter = (struct synopGMACNetworkAdapter *) dev->priv;
	if(adapter == NULL)
		return -1;

	gmacdev = (synopGMACdevice *) adapter->synopGMACdev;
	if(gmacdev == NULL)
		return -1;

	if(!synopGMAC_is_desc_owned_by_dma(gmacdev->TxNextDesc))
	{

		pbuf = (u32)plat_alloc_memory(p->len);
		//pbuf = (u32)pbuf_alloc(PBUF_LINK, p->len, PBUF_RAM);
		if(pbuf == 0)
		{
			rt_kprintf("===error in alloc bf1\n");
			return -1;
		}

		DEBUG_MES("p->len = %d\n", p->len);
		memcpy((void *)pbuf, p->payload, p->len);
		dma_addr = plat_dma_map_single(gmacdev,(void*)pbuf,p->len);

		status = synopGMAC_set_tx_qptr(gmacdev,dma_addr,p->len,pbuf,0,0,0,offload_needed,&index,dpr);
		if(status < 0){
			rt_kprintf("%s No More Free Tx Descriptors\n",__FUNCTION__);

			plat_free_memory((void *)pbuf);
			return -16;
		}
	}
	synopGMAC_resume_dma_tx(gmacdev);

	s32 desc_index;
	u32 data1, data2;
	u32 dma_addr1, dma_addr2;
	u32 length1, length2;
#ifdef ENH_DESC_8W
	u32 ext_status;
	u16 time_stamp_higher;
	u32 time_stamp_high;
	u32 time_stamp_low;
#endif
	do {
#ifdef ENH_DESC_8W
		desc_index = synopGMAC_get_tx_qptr(gmacdev, &status, &dma_addr1, &length1, &data1, &dma_addr2, &length2, &data2,&ext_status,&time_stamp_high,&time_stamp_low);
		synopGMAC_TS_read_timestamp_higher_val(gmacdev, &time_stamp_higher);
#else
		desc_index = synopGMAC_get_tx_qptr(gmacdev, &status, &dma_addr1, &length1, &data1, &dma_addr2, &length2, &data2);
#endif
		if(desc_index >= 0 && data1 != 0){
#ifdef  IPC_OFFLOAD
			if(synopGMAC_is_tx_ipv4header_checksum_error(gmacdev, status)){
				rt_kprintf("Harware Failed to Insert IPV4 Header Checksum\n");
			}
			if(synopGMAC_is_tx_payload_checksum_error(gmacdev, status)){
				rt_kprintf("Harware Failed to Insert Payload Checksum\n");
			}
#endif

			plat_free_memory((void *)(data1));  //sw:   data1 = buffer1

			if(synopGMAC_is_desc_valid(status)){
				adapter->synopGMACNetStats.tx_bytes += length1;
				adapter->synopGMACNetStats.tx_packets++;
			}
			else {
				adapter->synopGMACNetStats.tx_errors++;
				adapter->synopGMACNetStats.tx_aborted_errors += synopGMAC_is_tx_aborted(status);
				adapter->synopGMACNetStats.tx_carrier_errors += synopGMAC_is_tx_carrier_error(status);
			}
		}   adapter->synopGMACNetStats.collisions += synopGMAC_get_tx_collision_count(status);
	} while(desc_index >= 0);

	/* unlock eth device */
	rt_sem_release(&sem_lock);
//	rt_kprintf("output %d bytes\n", p->len);
	u32 test_data;
	test_data = synopGMACReadReg(gmacdev->DmaBase, DmaStatus);
	return RT_EOK;
}

struct pbuf *rt_eth_rx(rt_device_t device)
{
	DEBUG_MES("%s : \n", __FUNCTION__);
	struct rt_eth_dev *dev = &eth_dev;
	struct synopGMACNetworkAdapter *adapter;
	synopGMACdevice * gmacdev;
//	struct PmonInet * pinetdev;
	s32 desc_index;
	int i;
	char * ptr; 
	u32 bf1; 
	u32 data1;
	u32 data2;
	u32 len; 
	u32 status;
	u32 dma_addr1;
	u32 dma_addr2;
	struct pbuf *pbuf = RT_NULL;
	rt_sem_take(&sem_lock, RT_WAITING_FOREVER);

	adapter = (struct synopGMACNetworkAdapter *) dev->priv;
	if(adapter == NULL){
		rt_kprintf("%S : Unknown Device !!\n", __FUNCTION__);
		return NULL;
	}

	gmacdev = (synopGMACdevice *) adapter->synopGMACdev;
	if(gmacdev == NULL){
		rt_kprintf("%s : GMAC device structure is missing\n", __FUNCTION__);
		return NULL;
	}

	/*Handle the Receive Descriptors*/
	//	do{
	desc_index = synopGMAC_get_rx_qptr(gmacdev, &status,&dma_addr1,NULL, &data1,&dma_addr2,NULL,&data2);

	if(desc_index >= 0 && data1 != 0){
		DEBUG_MES("Received Data at Rx Descriptor %d for skb 0x%08x whose status is %08x\n",desc_index,dma_addr1,status);

		if(synopGMAC_is_rx_desc_valid(status)||SYNOP_PHY_LOOPBACK)
		{
			pbuf = pbuf_alloc(PBUF_LINK, MAX_ETHERNET_PAYLOAD, PBUF_RAM);
			if(pbuf == 0) rt_kprintf("===error in pbuf_alloc\n");


			dma_addr1 =  plat_dma_map_single(gmacdev,(void*)data1,RX_BUF_SIZE);
			len =  synopGMAC_get_rx_desc_frame_length(status); //Not interested in Ethernet CRC bytes
			rt_memcpy( pbuf->payload, (char *)data1, len);
			DEBUG_MES("==get pkg len: %d\n",len);
		}
		else
		{
			rt_kprintf("s: %08x\n",status);
			adapter->synopGMACNetStats.rx_errors++;
			adapter->synopGMACNetStats.collisions       += synopGMAC_is_rx_frame_collision(status);
			adapter->synopGMACNetStats.rx_crc_errors    += synopGMAC_is_rx_crc(status);
			adapter->synopGMACNetStats.rx_frame_errors  += synopGMAC_is_frame_dribbling_errors(status);
			adapter->synopGMACNetStats.rx_length_errors += synopGMAC_is_rx_frame_length_errors(status);
		}

		desc_index = synopGMAC_set_rx_qptr(gmacdev,dma_addr1, RX_BUF_SIZE, (u32)data1,0,0,0);

		if(desc_index < 0){
#if SYNOP_RX_DEBUG
			rt_kprintf("Cannot set Rx Descriptor for data1 %08x\n",(u32)data1);
#endif
			plat_free_memory((void *)data1);
		}

	}

	//	}while(desc_index >= 0);
	rt_sem_release(&sem_lock);
	DEBUG_MES("%s : before return \n", __FUNCTION__);
	return pbuf;
}

static int rtl88e1111_config_init(synopGMACdevice *gmacdev)
{
	int retval, err;
	u16 data;

	DEBUG_MES("in %s\n", __FUNCTION__);
	synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,&data);
	data = data | 0x82;
	err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,data);
	synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,&data);
	data = data | 0x8000;
	err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,data);
#if SYNOP_PHY_LOOPBACK
	synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,&data);
	data = data | 0x70;
	data = data & 0xffdf;
	err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x14,data);
	data = 0x8000;
	err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,data);
	data = 0x5140;
	err = synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x00,data);
#endif
	if (err < 0)
		return err;
	return 0;
}

int init_phy(synopGMACdevice *gmacdev)
{
	u16 data;

	synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,2,&data);
	/*set 88e1111 clock phase delay*/
	if(data == 0x141)
		rtl88e1111_config_init(gmacdev);
#if defined (RMII)
	else if(data == 0x8201)
	{
		//RTL8201
		data = 0x400;    // set RMII mode
		synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x19,data);
		synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x19,&data);
		TR("phy reg25 is %0x \n",data);

		data = 0x3100;    //set  100M speed
		synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x0,data);
	}
	else if(data == 0x0180 || data == 0x0181)
	{
		//DM9161
		synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x10,&data);
		data |= (1 << 8);  //set RMII mode 
		synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x10,data); //set RMII mode
		synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x10,&data);
		TR("phy reg16 is 0x%0x \n",data);

		//  synopGMAC_read_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x0,&data);
		//  data &= ~(1<<10);
		data = 0x3100;  //set auto-
		//data = 0x0100;    //set  10M speed
		synopGMAC_write_phy_reg(gmacdev->MacBase,gmacdev->PhyBase,0x0,data);
	}
#endif

	return 0;
}

u32 synopGMAC_wakeup_filter_config3[] = {
	0x00000000,
	0x000000FF,
	0x00000000,
	0x00000000,
	0x00000100,
	0x00003200,
	0x7eED0000,
	0x00000000 
};

static void synopGMAC_linux_powerdown_mac(synopGMACdevice *gmacdev)
{
	rt_kprintf("Put the GMAC to power down mode..\n");

	GMAC_Power_down = 1; 

	synopGMAC_disable_dma_tx(gmacdev);
	plat_delay(10000);

	synopGMAC_tx_disable(gmacdev);
	synopGMAC_rx_disable(gmacdev);
	plat_delay(10000);

	synopGMAC_disable_dma_rx(gmacdev);

	synopGMAC_magic_packet_enable(gmacdev);
	synopGMAC_write_wakeup_frame_register(gmacdev, synopGMAC_wakeup_filter_config3);

	synopGMAC_wakeup_frame_enable(gmacdev);

	synopGMAC_rx_enable(gmacdev);

	synopGMAC_pmt_int_enable(gmacdev);

	synopGMAC_power_down_enable(gmacdev);
	return;
}

static void synopGMAC_linux_powerup_mac(synopGMACdevice *gmacdev)
{
	GMAC_Power_down = 0;
	if( synopGMAC_is_magic_packet_received(gmacdev))
		rt_kprintf("GMAC wokeup due to Magic Pkt Received\n");
	if(synopGMAC_is_wakeup_frame_received(gmacdev))
		rt_kprintf("GMAC wokeup due to Wakeup Frame Received\n");

	synopGMAC_pmt_int_disable(gmacdev);

	synopGMAC_rx_enable(gmacdev);
	synopGMAC_enable_dma_rx(gmacdev);

	synopGMAC_tx_enable(gmacdev);
	synopGMAC_enable_dma_tx(gmacdev);
	return;
}


static int mdio_read(synopGMACPciNetworkAdapter *adapter, int addr, int reg) 
{
	synopGMACdevice * gmacdev;
	u16 data;
	gmacdev = adapter->synopGMACdev;

	synopGMAC_read_phy_reg(gmacdev->MacBase,addr,reg, &data);
	return data;
}

static void mdio_write(synopGMACPciNetworkAdapter *adapter, int addr, int reg, int data)
{
	synopGMACdevice * gmacdev;
	gmacdev = adapter->synopGMACdev;
	synopGMAC_write_phy_reg(gmacdev->MacBase,addr,reg,data);
}

void eth_rx_irq(int irqno,void *param)
{
	struct rt_eth_dev *dev = &eth_dev;
	struct synopGMACNetworkAdapter *adapter = dev->priv;
	//DEBUG_MES("in irq!!\n");
#ifdef RT_USING_GMAC_INT_MODE
	int i ;
	for(i = 0; i < 7200; i++)
		;
#endif	/*RT_USING_GMAC_INT_MODE*/
	synopGMACdevice * gmacdev = (synopGMACdevice *)adapter->synopGMACdev;

	u32 interrupt,dma_status_reg;
	s32 status;
	u32 dma_addr;

	//rt_kprintf("irq i = %d\n", i++);
	dma_status_reg = synopGMACReadReg(gmacdev->DmaBase, DmaStatus);
	if(dma_status_reg == 0)
	{
		rt_kprintf("dma_status ==0 \n");
		return;
	}

	//rt_kprintf("dma_status_reg is 0x%x\n", dma_status_reg);
	u32 gmacstatus;
	synopGMAC_disable_interrupt_all(gmacdev);
	gmacstatus = synopGMACReadReg(gmacdev->MacBase,GmacStatus);

	if(dma_status_reg & GmacPmtIntr){
		rt_kprintf("%s:: Interrupt due to PMT module\n",__FUNCTION__);
		//synopGMAC_linux_powerup_mac(gmacdev);
	} 
	if(dma_status_reg & GmacMmcIntr){
		rt_kprintf("%s:: Interrupt due to MMC module\n",__FUNCTION__);
		DEBUG_MES("%s:: synopGMAC_rx_int_status = %08x\n",__FUNCTION__,synopGMAC_read_mmc_rx_int_status(gmacdev));
		DEBUG_MES("%s:: synopGMAC_tx_int_status = %08x\n",__FUNCTION__,synopGMAC_read_mmc_tx_int_status(gmacdev));
	}    

	if(dma_status_reg & GmacLineIntfIntr){
		rt_kprintf("%s:: Interrupt due to GMAC LINE module\n",__FUNCTION__);
	}

	interrupt = synopGMAC_get_interrupt_type(gmacdev);
	//rt_kprintf("%s:Interrupts to be handled: 0x%08x\n",__FUNCTION__,interrupt);
	if(interrupt & synopGMACDmaError){
		u8 mac_addr0[6];
		rt_kprintf("%s::Fatal Bus Error Inetrrupt Seen\n",__FUNCTION__);

		memcpy(mac_addr0,dev->dev_addr,6);
		synopGMAC_disable_dma_tx(gmacdev);
		synopGMAC_disable_dma_rx(gmacdev);

		synopGMAC_take_desc_ownership_tx(gmacdev);
		synopGMAC_take_desc_ownership_rx(gmacdev);

		synopGMAC_init_tx_rx_desc_queue(gmacdev);

		synopGMAC_reset(gmacdev);

		synopGMAC_set_mac_addr(gmacdev,GmacAddr0High,GmacAddr0Low, mac_addr0);
		synopGMAC_dma_bus_mode_init(gmacdev,DmaFixedBurstEnable| DmaBurstLength8 | DmaDescriptorSkip2 );
		synopGMAC_dma_control_init(gmacdev,DmaStoreAndForward);
		synopGMAC_init_rx_desc_base(gmacdev);
		synopGMAC_init_tx_desc_base(gmacdev);
		synopGMAC_mac_init(gmacdev);
		synopGMAC_enable_dma_rx(gmacdev);
		synopGMAC_enable_dma_tx(gmacdev);

	}
	if(interrupt & synopGMACDmaRxNormal){
		//DEBUG_MES("%s:: Rx Normal \n", __FUNCTION__);
		//synop_handle_received_data(netdev);
		eth_device_ready(&eth_dev.parent);
	}
	if(interrupt & synopGMACDmaRxAbnormal){
		//rt_kprintf("%s::Abnormal Rx Interrupt Seen\n",__FUNCTION__);
		if(GMAC_Power_down == 0){
			adapter->synopGMACNetStats.rx_over_errors++;
			synopGMACWriteReg(gmacdev->DmaBase, DmaStatus ,0x80);
			synopGMAC_resume_dma_rx(gmacdev);
		}
	}
	if(interrupt & synopGMACDmaRxStopped){
		rt_kprintf("%s::Receiver stopped seeing Rx interrupts\n",__FUNCTION__); //Receiver gone in to stopped state
	}

	if(interrupt & synopGMACDmaTxNormal){
		DEBUG_MES("%s::Finished Normal Transmission \n",__FUNCTION__);
		//			synop_handle_transmit_over(netdev);
	}

	if(interrupt & synopGMACDmaTxAbnormal){
		rt_kprintf("%s::Abnormal Tx Interrupt Seen\n",__FUNCTION__);
	}
	if(interrupt & synopGMACDmaTxStopped){
		TR("%s::Transmitter stopped sending the packets\n",__FUNCTION__);
		if(GMAC_Power_down == 0){    // If Mac is not in powerdown
			synopGMAC_disable_dma_tx(gmacdev);
			synopGMAC_take_desc_ownership_tx(gmacdev);

			synopGMAC_enable_dma_tx(gmacdev);
			//		netif_wake_queue(netdev);
			TR("%s::Transmission Resumed\n",__FUNCTION__);
		}
	}
	/* Enable the interrrupt before returning from ISR*/
	synopGMAC_enable_interrupt(gmacdev,DmaIntEnable);

	return;
}

void rt_hw_eth_init(void)
{
	u64 base_addr = Gmac_base; 
	struct synopGMACNetworkAdapter * synopGMACadapter;
	static u8 mac_addr0[6] = DEFAULT_MAC_ADDRESS;

	rt_sem_init(&sem_ack, "tx_ack", 1, RT_IPC_FLAG_FIFO);
	rt_sem_init(&sem_lock, "eth_lock", 1, RT_IPC_FLAG_FIFO);


	memset(&eth_dev, 0, sizeof(eth_dev));
	synopGMACadapter = (struct synopGMACNetworkAdapter * )plat_alloc_memory(sizeof (struct synopGMACNetworkAdapter));
	if(!synopGMACadapter){
		rt_kprintf("Error in Memory Allocataion, Founction : %s \n", __FUNCTION__);
	}
	memset((char *)synopGMACadapter ,0, sizeof (struct synopGMACNetworkAdapter));

	synopGMACadapter->synopGMACdev    = NULL;

	synopGMACadapter->synopGMACdev = (synopGMACdevice *) plat_alloc_memory(sizeof (synopGMACdevice));
	if(!synopGMACadapter->synopGMACdev){
		rt_kprintf("Error in Memory Allocataion, Founction : %s \n", __FUNCTION__);
	}
	memset((char *)synopGMACadapter->synopGMACdev ,0, sizeof (synopGMACdevice));
	/*
	 * Attach the device to MAC struct This will configure all the required base addresses
	 * such as Mac base, configuration base, phy base address(out of 32 possible phys)
	 * */
	synopGMAC_attach(synopGMACadapter->synopGMACdev,(regbase + MACBASE), regbase + DMABASE, DEFAULT_PHY_BASE, mac_addr0);

	init_phy(synopGMACadapter->synopGMACdev);
	synopGMAC_reset(synopGMACadapter->synopGMACdev);

	/* MII setup */
	synopGMACadapter->mii.phy_id_mask = 0x1F;
	synopGMACadapter->mii.reg_num_mask = 0x1F;
	synopGMACadapter->mii.dev = synopGMACadapter;
	synopGMACadapter->mii.mdio_read = mdio_read;
	synopGMACadapter->mii.mdio_write = mdio_write;
	synopGMACadapter->mii.phy_id = synopGMACadapter->synopGMACdev->PhyBase;
	synopGMACadapter->mii.supports_gmii = mii_check_gmii_support(&synopGMACadapter->mii);

	eth_dev.iobase = base_addr;
	eth_dev.name = "e0";
	eth_dev.priv = synopGMACadapter;
	eth_dev.dev_addr[0] = mac_addr0[0];
	eth_dev.dev_addr[1] = mac_addr0[1];
	eth_dev.dev_addr[2] = mac_addr0[2];
	eth_dev.dev_addr[3] = mac_addr0[3];
	eth_dev.dev_addr[4] = mac_addr0[4];
	eth_dev.dev_addr[5] = mac_addr0[5];

	eth_dev.parent.parent.type          = RT_Device_Class_NetIf;
	eth_dev.parent.parent.init	        = eth_init;
	eth_dev.parent.parent.open	        = eth_open;
	eth_dev.parent.parent.close         = eth_close;
	eth_dev.parent.parent.read	        = eth_read;
	eth_dev.parent.parent.write	        = eth_write;
	eth_dev.parent.parent.control		= eth_control;
	eth_dev.parent.parent.user_data		= RT_NULL;

	eth_dev.parent.eth_tx            = rt_eth_tx;
	eth_dev.parent.eth_rx            = rt_eth_rx;

	eth_device_init(&(eth_dev.parent), "e0");
}