/**
 * \file
 *
 * \brief Calendar.
 *
 * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */
#ifndef _CALENDAR_H_INCLUDED_
#define _CALENDAR_H_INCLUDED_

#ifdef __cplusplus
extern "C" {
#endif

#include <stdint.h>
#include <stdbool.h>
/**
*
* \defgroup calendar_group Calendar service
 *
 * See \ref calendar_quickstart.
 *
 * This is the common API for a calendar service.
 * It provides functionality to convert UNIX timestamps to dates and back. It
 * also provides functionality for calculating the difference between dates and
 * converting timestamps to dates with different time zones and back.
 * \note
 * This module is a pure software module, and does not interface
 * hardware calendar peripherals (e.g. the AST on UC3L)
 *
 * @{
 */

//! Calendar structure to hold a date
struct calendar_date {
	uint8_t second;        //!< 0-59
	uint8_t minute;        //!< 0-59
	uint8_t hour;          //!< 0-23
	uint8_t date;          //!< 0-30 \note First day of month is 0, not 1.
	uint8_t month;         //!< 0 January - 11 December
	uint16_t year;         //!< 1970-2105
	uint8_t dayofweek;     //!< 0 Sunday  - 6 Saturday
};

bool calendar_is_date_valid(struct calendar_date *date);

void calendar_timestamp_to_date(uint32_t timestamp, struct calendar_date
		*date_out);

void calendar_timestamp_to_date_tz(uint32_t timestamp, int8_t hour,
		uint8_t min, struct calendar_date *date_out);

uint32_t calendar_date_to_timestamp(struct calendar_date *date);

uint32_t calendar_date_to_timestamp_tz(struct calendar_date *date, int8_t hour,
		uint8_t min);

void calendar_time_between_dates(struct calendar_date *date_end,
		struct calendar_date *date_start, struct calendar_date *date_out);

void calendar_add_second_to_date(struct calendar_date *date);

/** @} */

#ifdef __cplusplus
}
#endif

/**
 * \page calendar_quickstart Quick start guide for Calendar service
 *
 * This is the quick start guide for the \ref calendar_group, with
 * step-by-step instructions on how to configure and use the driver in a
 * selection of use cases.
 *
 * The use cases contain several code fragments. The code fragments in the
 * steps for setup can be copied into a custom initialization function, while
 * the steps for usage can be copied into, e.g., the main application function.
 *
 * \section calendar_basic_use_case Basic use case
 * \section calendar_use_cases Calendar use cases
 * - \ref calendar_basic_use_case
 * - \subpage calendar_use_case_1
 *
 * \section calendar_basic_use_case Basic use case - Calculate timestamp
 *
 * The use case will let the user calculate the corresponding timestamp to a
 * date
 *
 * \section calendar_basic_use_case_setup Setup steps
 *
 * \subsection calendar_basic_use_case_setup_prereq Prerequisites
 * For the code of this use case to work, the following must
 * be added to the project:
 * -# A date struct with a date:
 * \code
	struct calendar_date date = {
	    .second = 12,
	    .minute = 1,
	    .hour = 22,
	    .date = 8,
	    .month = 2,
	    .year = 1985
	};
\endcode
 *
 * \subsection calendar_basic_use_case_setup_code Example code
 * No setup code is needed, the service is ready for use as-is.
 *
 * \section calendar_basic_use_case_usage Usage steps
 *
 * \subsection calendar_basic_use_case_usage_code Example code
 * Add to, e.g. the main loop in the application C-file:
 * \code uint32_t timestamp = calendar_date_to_timestamp(&date); \endcode
 *
 * \subsection calendar_basic_use_case_usage_flow Workflow
 * -# Convert date to timestamp:
 *   - \code uint32_t timestamp = calendar_date_to_timestamp(&date); \endcode
 */

/**
 * \page calendar_use_case_1 Calculate time between dates
 *
 * The use case will let the user calculate the time between two dates, by
 * first calculating the dates from two timestamps.
 *
 * \section calendar_use_case_1_setup Setup steps
 *
 * \subsection calendar_use_case_1_setup_prereq Prerequisites
 * For the code of this use case to work, the following must
 * be added to the project:
 * -# Three date structs:
 * \code
	struct calendar_date result;
	struct calendar_date end_date;
	struct calendar_date start_date;
\endcode
 * -# Two timestamps:
 * \code
	uint32_t end_timestamp = 1309174659;
	uint32_t start_timestamp = 123456789;
\endcode
 *
 * \subsection calendar_use_case_1_setup_code Example code
 * No setup code is needed, the service is ready for use as-is.
 *
 * \section calendar_use_case_1_usage Usage steps
 *
 * \subsection calendar_use_case_1_usage_code Example code
 * Add to, e.g. the main loop in the application C-file:
 * \code
	calendar_timestamp_to_date(end_timestamp, &end_date);
	calendar_timestamp_to_date(start_timestamp, &start_date);
	calendar_time_between_dates(&end_date, &start_date, &result);
\endcode
 *
 * \subsection calendar_use_case_1_usage_flow Workflow
 * -# Convert the end timestamp to date:
 *   - \code calendar_timestamp_to_date(end_timestamp, &end_date); \endcode
 * -# Convert the start timestamp to date:
 *   - \code calendar_timestamp_to_date(start_timestamp, &start_date); \endcode
 * -# Calculate the time between the two dates:
 *   - \code calendar_time_between_dates(&end_date, &start_date, &result);
\endcode
 */

#endif /* _CALENDAR_H_INCLUDED_ */