/**************************************************************************//** * @file system_LPC11xx.c * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Source File * for the NXP LPC11xx Device Series * @version V1.00 * @date 17. November 2009 * * @note * Copyright (C) 2009 ARM Limited. All rights reserved. * * @par * ARM Limited (ARM) is supplying this software for use with Cortex-M * processor based microcontrollers. This file can be freely distributed * within development tools that are supporting such ARM based processors. * * @par * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * ******************************************************************************/ #include #include "LPC11xx.h" /* //-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ */ /*--------------------- Clock Configuration ---------------------------------- // // Clock Configuration // System Clock Setup // System Oscillator Enable // Select System Oscillator Frequency Range // <0=> 1 - 20 MHz // <1=> 15 - 25 MHz // // Watchdog Oscillator Enable // Select Divider for Fclkana // <0=> 2 <1=> 4 <2=> 6 <3=> 8 // <4=> 10 <5=> 12 <6=> 14 <7=> 16 // <8=> 18 <9=> 20 <10=> 22 <11=> 24 // <12=> 26 <13=> 28 <14=> 30 <15=> 32 // <16=> 34 <17=> 36 <18=> 38 <19=> 40 // <20=> 42 <21=> 44 <22=> 46 <23=> 48 // <24=> 50 <25=> 52 <26=> 54 <27=> 56 // <28=> 58 <29=> 60 <30=> 62 <31=> 64 // Select Watchdog Oscillator Analog Frequency (Fclkana) // <0=> Disabled // <1=> 0.5 MHz // <2=> 0.8 MHz // <3=> 1.1 MHz // <4=> 1.4 MHz // <5=> 1.6 MHz // <6=> 1.8 MHz // <7=> 2.0 MHz // <8=> 2.2 MHz // <9=> 2.4 MHz // <10=> 2.6 MHz // <11=> 2.7 MHz // <12=> 2.9 MHz // <13=> 3.1 MHz // <14=> 3.2 MHz // <15=> 3.4 MHz // // Select Input Clock for sys_pllclkin (Register: SYSPLLCLKSEL) // <0=> IRC Oscillator // <1=> System Oscillator // <2=> WDT Oscillator // <3=> Invalid // Use System PLL // F_pll = M * F_in // F_in must be in the range of 10 MHz to 25 MHz // M: PLL Multiplier Selection // <1-32><#-1> // P: PLL Divider Selection // <0=> 2 // <1=> 4 // <2=> 8 // <3=> 16 // DIRECT: Direct CCO Clock Output Enable // BYPASS: PLL Bypass Enable // // Select Input Clock for Main clock (Register: MAINCLKSEL) // <0=> IRC Oscillator // <1=> Input Clock to System PLL // <2=> WDT Oscillator // <3=> System PLL Clock Out // // System AHB Divider <0-255> // 0 = is disabled // SYS Clock Enable // ROM Clock Enable // RAM Clock Enable // FLASHREG Flash Register Interface Clock Enable // FLASHARRAY Flash Array Access Clock Enable // I2C Clock Enable // GPIO Clock Enable // CT16B0 Clock Enable // CT16B1 Clock Enable // CT32B0 Clock Enable // CT32B1 Clock Enable // SSP0 Clock Enable // UART Clock Enable // ADC Clock Enable // WDT Clock Enable // IOCON Clock Enable // SSP1 Clock Enable // // SSP0 Clock Divider <0-255> // 0 = is disabled // UART Clock Divider <0-255> // 0 = is disabled // SSP1 Clock Divider <0-255> // 0 = is disabled // */ #define CLOCK_SETUP 1 #define SYSCLK_SETUP 1 #define SYSOSC_SETUP 1 #define SYSOSCCTRL_Val 0x00000000 #define WDTOSC_SETUP 0 #define WDTOSCCTRL_Val 0x000000A0 #define SYSPLLCLKSEL_Val 0x00000001 #define SYSPLL_SETUP 1 #define SYSPLLCTRL_Val 0x00000023 #define MAINCLKSEL_Val 0x00000003 #define SYSAHBCLKDIV_Val 0x00000001 #define AHBCLKCTRL_Val 0x0001005F #define SSP0CLKDIV_Val 0x00000001 #define UARTCLKDIV_Val 0x00000001 #define SSP1CLKDIV_Val 0x00000001 /*--------------------- Memory Mapping Configuration ------------------------- // // Memory Mapping // System Memory Remap (Register: SYSMEMREMAP) // <0=> Bootloader mapped to address 0 // <1=> RAM mapped to address 0 // <2=> Flash mapped to address 0 // <3=> Flash mapped to address 0 // */ #define MEMMAP_SETUP 0 #define SYSMEMREMAP_Val 0x00000001 /* //-------- <<< end of configuration section >>> ------------------------------ */ /*---------------------------------------------------------------------------- Check the register settings *----------------------------------------------------------------------------*/ #define CHECK_RANGE(val, min, max) ((val < min) || (val > max)) #define CHECK_RSVD(val, mask) (val & mask) /* Clock Configuration -------------------------------------------------------*/ #if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003)) #error "SYSOSCCTRL: Invalid values of reserved bits!" #endif #if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF)) #error "WDTOSCCTRL: Invalid values of reserved bits!" #endif #if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2)) #error "SYSPLLCLKSEL: Value out of range!" #endif #if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF)) #error "SYSPLLCTRL: Invalid values of reserved bits!" #endif #if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003)) #error "MAINCLKSEL: Invalid values of reserved bits!" #endif #if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255)) #error "SYSAHBCLKDIV: Value out of range!" #endif #if (CHECK_RSVD((AHBCLKCTRL_Val), ~0x0001FFFF)) #error "AHBCLKCTRL: Invalid values of reserved bits!" #endif #if (CHECK_RANGE((SSP0CLKDIV_Val), 0, 255)) #error "SSP0CLKDIV: Value out of range!" #endif #if (CHECK_RANGE((UARTCLKDIV_Val), 0, 255)) #error "UARTCLKDIV: Value out of range!" #endif #if (CHECK_RANGE((SSP1CLKDIV_Val), 0, 255)) #error "SSP1CLKDIV: Value out of range!" #endif #if (CHECK_RSVD((SYSMEMREMAP_Val), ~0x00000003)) #error "SYSMEMREMAP: Invalid values of reserved bits!" #endif /*---------------------------------------------------------------------------- DEFINES *----------------------------------------------------------------------------*/ /*---------------------------------------------------------------------------- Define clocks *----------------------------------------------------------------------------*/ #define __XTAL (12000000UL) /* Oscillator frequency */ #define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */ #define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */ #define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F) #define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2) #if (CLOCK_SETUP) /* Clock Setup */ #if (SYSCLK_SETUP) /* System Clock Setup */ #if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/ #if (__FREQSEL == 0) #define __WDT_OSC_CLK ( 400000 / __DIVSEL) #elif (__FREQSEL == 1) #define __WDT_OSC_CLK ( 500000 / __DIVSEL) #elif (__FREQSEL == 2) #define __WDT_OSC_CLK ( 800000 / __DIVSEL) #elif (__FREQSEL == 3) #define __WDT_OSC_CLK (1100000 / __DIVSEL) #elif (__FREQSEL == 4) #define __WDT_OSC_CLK (1400000 / __DIVSEL) #elif (__FREQSEL == 5) #define __WDT_OSC_CLK (1600000 / __DIVSEL) #elif (__FREQSEL == 6) #define __WDT_OSC_CLK (1800000 / __DIVSEL) #elif (__FREQSEL == 7) #define __WDT_OSC_CLK (2000000 / __DIVSEL) #elif (__FREQSEL == 8) #define __WDT_OSC_CLK (2200000 / __DIVSEL) #elif (__FREQSEL == 9) #define __WDT_OSC_CLK (2400000 / __DIVSEL) #elif (__FREQSEL == 10) #define __WDT_OSC_CLK (2600000 / __DIVSEL) #elif (__FREQSEL == 11) #define __WDT_OSC_CLK (2700000 / __DIVSEL) #elif (__FREQSEL == 12) #define __WDT_OSC_CLK (2900000 / __DIVSEL) #elif (__FREQSEL == 13) #define __WDT_OSC_CLK (3100000 / __DIVSEL) #elif (__FREQSEL == 14) #define __WDT_OSC_CLK (3200000 / __DIVSEL) #else #define __WDT_OSC_CLK (3400000 / __DIVSEL) #endif #else #define __WDT_OSC_CLK (1600000 / 2) #endif // WDTOSC_SETUP /* sys_pllclkin calculation */ #if ((SYSPLLCLKSEL_Val & 0x03) == 0) #define __SYS_PLLCLKIN (__IRC_OSC_CLK) #elif ((SYSPLLCLKSEL_Val & 0x03) == 1) #define __SYS_PLLCLKIN (__SYS_OSC_CLK) #elif ((SYSPLLCLKSEL_Val & 0x03) == 2) #define __SYS_PLLCLKIN (__WDT_OSC_CLK) #else #define __SYS_PLLCLKIN (0) #endif #if (SYSPLL_SETUP) /* System PLL Setup */ #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1)) #else #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * (1)) #endif // SYSPLL_SETUP /* main clock calculation */ #if ((MAINCLKSEL_Val & 0x03) == 0) #define __MAIN_CLOCK (__IRC_OSC_CLK) #elif ((MAINCLKSEL_Val & 0x03) == 1) #define __MAIN_CLOCK (__SYS_PLLCLKIN) #elif ((MAINCLKSEL_Val & 0x03) == 2) #define __MAIN_CLOCK (__WDT_OSC_CLK) #elif ((MAINCLKSEL_Val & 0x03) == 3) #define __MAIN_CLOCK (__SYS_PLLCLKOUT) #else #define __MAIN_CLOCK (0) #endif #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val) #else // SYSCLK_SETUP #if (SYSAHBCLKDIV_Val == 0) #define __SYSTEM_CLOCK (0) #else #define __SYSTEM_CLOCK (__XTAL / SYSAHBCLKDIV_Val) #endif #endif // SYSCLK_SETUP #else #define __SYSTEM_CLOCK (__XTAL) #endif // CLOCK_SETUP /*---------------------------------------------------------------------------- Clock Variable definitions *----------------------------------------------------------------------------*/ uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/ /*---------------------------------------------------------------------------- Clock functions *----------------------------------------------------------------------------*/ void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */ { uint32_t wdt_osc = 0; /* Determine clock frequency according to clock register values */ switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) { case 0: wdt_osc = 400000; break; case 1: wdt_osc = 500000; break; case 2: wdt_osc = 800000; break; case 3: wdt_osc = 1100000; break; case 4: wdt_osc = 1400000; break; case 5: wdt_osc = 1600000; break; case 6: wdt_osc = 1800000; break; case 7: wdt_osc = 2000000; break; case 8: wdt_osc = 2200000; break; case 9: wdt_osc = 2400000; break; case 10: wdt_osc = 2600000; break; case 11: wdt_osc = 2700000; break; case 12: wdt_osc = 2900000; break; case 13: wdt_osc = 3100000; break; case 14: wdt_osc = 3200000; break; case 15: wdt_osc = 3400000; break; } wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2; switch (LPC_SYSCON->MAINCLKSEL & 0x03) { case 0: /* Internal RC oscillator */ SystemCoreClock = __IRC_OSC_CLK; break; case 1: /* Input Clock to System PLL */ switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) { case 0: /* Internal RC oscillator */ SystemCoreClock = __IRC_OSC_CLK; break; case 1: /* System oscillator */ SystemCoreClock = __SYS_OSC_CLK; break; case 2: /* WDT Oscillator */ SystemCoreClock = wdt_osc; break; case 3: /* Reserved */ SystemCoreClock = 0; break; } break; case 2: /* WDT Oscillator */ SystemCoreClock = wdt_osc; break; case 3: /* System PLL Clock Out */ switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) { case 0: /* Internal RC oscillator */ if (LPC_SYSCON->SYSPLLCTRL & 0x180) { SystemCoreClock = __IRC_OSC_CLK; } else { SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1); } break; case 1: /* System oscillator */ if (LPC_SYSCON->SYSPLLCTRL & 0x180) { SystemCoreClock = __SYS_OSC_CLK; } else { SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1); } break; case 2: /* WDT Oscillator */ if (LPC_SYSCON->SYSPLLCTRL & 0x180) { SystemCoreClock = wdt_osc; } else { SystemCoreClock = wdt_osc * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1); } break; case 3: /* Reserved */ SystemCoreClock = 0; break; } break; } SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV; } /** * Initialize the system * * @param none * @return none * * @brief Setup the microcontroller system. * Initialize the System. */ void SystemInit (void) { #if (CLOCK_SETUP) /* Clock Setup */ #if (SYSCLK_SETUP) /* System Clock Setup */ #if (SYSOSC_SETUP) /* System Oscillator Setup */ uint32_t i; LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */ LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val; for (i = 0; i < 200; i++) __NOP(); LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */ LPC_SYSCON->SYSPLLCLKUEN = 0x01; /* Update Clock Source */ LPC_SYSCON->SYSPLLCLKUEN = 0x00; /* Toggle Update Register */ LPC_SYSCON->SYSPLLCLKUEN = 0x01; while (!(LPC_SYSCON->SYSPLLCLKUEN & 0x01)); /* Wait Until Updated */ #if (SYSPLL_SETUP) /* System PLL Setup */ LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val; LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */ while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */ #endif #endif #if (WDTOSC_SETUP) /* Watchdog Oscillator Setup*/ LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val; LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */ #endif LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */ LPC_SYSCON->MAINCLKUEN = 0x01; /* Update MCLK Clock Source */ LPC_SYSCON->MAINCLKUEN = 0x00; /* Toggle Update Register */ LPC_SYSCON->MAINCLKUEN = 0x01; while (!(LPC_SYSCON->MAINCLKUEN & 0x01)); /* Wait Until Updated */ #endif LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val; LPC_SYSCON->SYSAHBCLKCTRL = AHBCLKCTRL_Val; LPC_SYSCON->SSP0CLKDIV = SSP0CLKDIV_Val; LPC_SYSCON->UARTCLKDIV = UARTCLKDIV_Val; LPC_SYSCON->SSP1CLKDIV = SSP1CLKDIV_Val; #endif #if (MEMMAP_SETUP || MEMMAP_INIT) /* Memory Mapping Setup */ LPC_SYSCON->SYSMEMREMAP = SYSMEMREMAP_Val; #endif }