/**************************************************************************//** * @file nu_scuart.h * @version V3.00 * @brief Smartcard UART mode (SCUART) driver header file * * @copyright SPDX-License-Identifier: Apache-2.0 * @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __NU_SCUART_H__ #define __NU_SCUART_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup Standard_Driver Standard Driver @{ */ /** @addtogroup SCUART_Driver SCUART Driver @{ */ /** @addtogroup SCUART_EXPORTED_CONSTANTS SCUART Exported Constants @{ */ #define SCUART_CHAR_LEN_5 (0x3UL << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 5 bits \hideinitializer */ #define SCUART_CHAR_LEN_6 (0x2UL << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 6 bits \hideinitializer */ #define SCUART_CHAR_LEN_7 (0x1UL << SC_UARTCTL_WLS_Pos) /*!< Set SCUART word length to 7 bits \hideinitializer */ #define SCUART_CHAR_LEN_8 (0UL) /*!< Set SCUART word length to 8 bits \hideinitializer */ #define SCUART_PARITY_NONE (SC_UARTCTL_PBOFF_Msk) /*!< Set SCUART transfer with no parity \hideinitializer */ #define SCUART_PARITY_ODD (SC_UARTCTL_OPE_Msk) /*!< Set SCUART transfer with odd parity \hideinitializer */ #define SCUART_PARITY_EVEN (0UL) /*!< Set SCUART transfer with even parity \hideinitializer */ #define SCUART_STOP_BIT_1 (SC_CTL_NSB_Msk) /*!< Set SCUART transfer with one stop bit \hideinitializer */ #define SCUART_STOP_BIT_2 (0UL) /*!< Set SCUART transfer with two stop bits \hideinitializer */ #define SCUART_TIMEOUT_ERR (-1L) /*!< SCUART operation abort due to timeout error \hideinitializer */ /**@}*/ /* end of group SCUART_EXPORTED_CONSTANTS */ extern int32_t g_SCUART_i32ErrCode; /** @addtogroup SCUART_EXPORTED_FUNCTIONS SCUART Exported Functions @{ */ /* TX Macros */ /** * @brief Write Data to Tx data register * * @param[in] sc The pointer of smartcard module. * @param[in] u8Data Data byte to transmit. * * @return None * * @details By writing data to DAT register, the SC will send out an 8-bit data. * \hideinitializer */ #define SCUART_WRITE(sc, u8Data) ((sc)->DAT = (u8Data)) /** * @brief Get Tx FIFO empty flag status from register * * @param[in] sc The pointer of smartcard module. * * @return Transmit FIFO empty status * @retval 0 Transmit FIFO is not empty * @retval SC_STATUS_TXEMPTY_Msk Transmit FIFO is empty * * @details When the last byte of Tx buffer has been transferred to Transmitter Shift Register, hardware sets TXEMPTY (SC_STATUS[9]) high. * It will be cleared when writing data into DAT (SC_DAT[7:0]). * \hideinitializer */ #define SCUART_GET_TX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_TXEMPTY_Msk) /** * @brief Get Tx FIFO full flag status from register * * @param[in] sc The pointer of smartcard module. * * @return Transmit FIFO full status * @retval 0 Transmit FIFO is not full * @retval SC_STATUS_TXFULL_Msk Transmit FIFO is full * * @details TXFULL (SC_STATUS[10]) is set when Tx buffer counts equals to 4, otherwise is cleared by hardware. * \hideinitializer */ #define SCUART_GET_TX_FULL(sc) ((sc)->STATUS & SC_STATUS_TXFULL_Msk) /** * @brief Wait specified smartcard port transmission complete * * @param[in] sc The pointer of smartcard module. * * @return None * * @details TXACT (SC_STATUS[31]) is cleared automatically when Tx transfer is finished or the last byte transmission has completed. * * @note This macro blocks until transmit complete. * \hideinitializer */ #define SCUART_WAIT_TX_EMPTY(sc) while(((sc)->STATUS & SC_STATUS_TXACT_Msk) == SC_STATUS_TXACT_Msk) /** * @brief Check specified smartcard port transmit FIFO is full or not * * @param[in] sc The pointer of smartcard module. * * @return Transmit FIFO full status * @retval 0 Transmit FIFO is not full * @retval 1 Transmit FIFO is full * * @details TXFULL (SC_STATUS[10]) indicates Tx buffer full or not. * This bit is set when Tx buffer counts equals to 4, otherwise is cleared by hardware. * \hideinitializer */ #define SCUART_IS_TX_FULL(sc) (((sc)->STATUS & SC_STATUS_TXFULL_Msk)? 1 : 0) /** * @brief Check specified smartcard port transmission is over * * @param[in] sc The pointer of smartcard module. * * @return Transmit complete status * @retval 0 Transmit is not complete * @retval 1 Transmit complete * * @details TXACT (SC_STATUS[31]) indicates Tx Transmit is complete or not. * \hideinitializer */ #define SCUART_IS_TX_EMPTY(sc) (((sc)->STATUS & SC_STATUS_TXACT_Msk)? 0 : 1) /** * @brief Check specified smartcard port transmit FIFO empty status * * @param[in] sc The pointer of smartcard module. * * @return Transmit FIFO empty status * @retval 0 Transmit FIFO is not empty * @retval 1 Transmit FIFO is empty * * @details TXEMPTY (SC_STATUS[9]) is set by hardware when the last byte of Tx buffer has been transferred to Transmitter Shift Register. * \hideinitializer */ #define SCUART_IS_TX_FIFO_EMPTY(sc) (((sc)->STATUS & SC_STATUS_TXEMPTY_Msk)? 1 : 0) /** * @brief Check specified Smartcard port Transmission Status * * @param[in] sc The pointer of smartcard module. * * @retval 0 Transmit is completed * @retval 1 Transmit is active * * @details TXACT (SC_STATUS[31]) is set by hardware when Tx transfer is in active and the STOP bit of the last byte has been transmitted. * \hideinitializer */ #define SCUART_IS_TX_ACTIVE(sc) (((sc)->STATUS & SC_STATUS_TXACT_Msk)? 1 : 0) /* RX Macros */ /** * @brief Read Rx data register * * @param[in] sc The pointer of smartcard module. * * @return The oldest data byte in RX FIFO * * @details By reading DAT register, the SC will return an 8-bit received data. * \hideinitializer */ #define SCUART_READ(sc) ((sc)->DAT) /** * @brief Get Rx FIFO empty flag status from register * * @param[in] sc The pointer of smartcard module. * * @return Receive FIFO empty status * @retval 0 Receive FIFO is not empty * @retval SC_STATUS_RXEMPTY_Msk Receive FIFO is empty * * @details When the last byte of Rx buffer has been read by CPU, hardware sets RXEMPTY (SC_STATUS[1]) high. * It will be cleared when SC receives any new data. * \hideinitializer */ #define SCUART_GET_RX_EMPTY(sc) ((sc)->STATUS & SC_STATUS_RXEMPTY_Msk) /** * @brief Get Rx FIFO full flag status from register * * @param[in] sc The pointer of smartcard module. * * @return Receive FIFO full status * @retval 0 Receive FIFO is not full * @retval SC_STATUS_TXFULL_Msk Receive FIFO is full * * @details RXFULL (SC_STATUS[2]) is set when Rx buffer counts equals to 4, otherwise it is cleared by hardware. * \hideinitializer */ #define SCUART_GET_RX_FULL(sc) ((sc)->STATUS & SC_STATUS_RXFULL_Msk) /** * @brief Check if receive data number in FIFO reach FIFO trigger level or not * * @param[in] sc The pointer of smartcard module. * * @return Receive FIFO data status * @retval 0 The number of bytes in receive FIFO is less than trigger level * @retval 1 The number of bytes in receive FIFO equals or larger than trigger level * * @details RDAIF (SC_INTSTS[0]) is used for received data reaching trigger level RXTRGLV (SC_CTL[7:6]) interrupt status flag. * * @note If receive trigger level is \b not 1 byte, this macro return 0 does not necessary indicates there is no data in FIFO. * \hideinitializer */ #define SCUART_IS_RX_READY(sc) (((sc)->INTSTS & SC_INTSTS_RDAIF_Msk)? 1 : 0) /** * @brief Check specified smartcard port receive FIFO is full or not * * @param[in] sc The pointer of smartcard module. * * @return Receive FIFO full status * @retval 0 Receive FIFO is not full * @retval 1 Receive FIFO is full * * @details RXFULLF( SC_STATUS[2]) is set when Rx buffer counts equals to 4, otherwise it is cleared by hardware. * \hideinitializer */ #define SCUART_IS_RX_FULL(sc) (((sc)->STATUS & SC_STATUS_RXFULL_Msk)? 1 : 0) /* Interrupt Macros */ /** * @brief Enable specified interrupts * * @param[in] sc The pointer of smartcard module. * @param[in] u32Mask Interrupt masks to enable, a combination of following bits, * - \ref SC_INTEN_RXTOIEN_Msk * - \ref SC_INTEN_TERRIEN_Msk * - \ref SC_INTEN_TBEIEN_Msk * - \ref SC_INTEN_RDAIEN_Msk * * @return None * * @details The macro is used to enable receiver buffer time-out interrupt, transfer error interrupt, * transmit buffer empty interrupt or receive data reach trigger level interrupt. * \hideinitializer */ #define SCUART_ENABLE_INT(sc, u32Mask) ((sc)->INTEN |= (u32Mask)) /** * @brief Disable specified interrupts * * @param[in] sc The pointer of smartcard module. * @param[in] u32Mask Interrupt masks to disable, a combination of following bits, * - \ref SC_INTEN_RXTOIEN_Msk * - \ref SC_INTEN_TERRIEN_Msk * - \ref SC_INTEN_TBEIEN_Msk * - \ref SC_INTEN_RDAIEN_Msk * * @return None * * @details The macro is used to disable receiver buffer time-out interrupt, transfer error interrupt, * transmit buffer empty interrupt or receive data reach trigger level interrupt. * \hideinitializer */ #define SCUART_DISABLE_INT(sc, u32Mask) ((sc)->INTEN &= ~(u32Mask)) /** * @brief Get specified interrupt flag/status * * @param[in] sc The pointer of smartcard module. * @param[in] u32Type Interrupt flag/status to check, could be one of following value * - \ref SC_INTSTS_RXTOIF_Msk * - \ref SC_INTSTS_TERRIF_Msk * - \ref SC_INTSTS_TBEIF_Msk * - \ref SC_INTSTS_RDAIF_Msk * * @return The status of specified interrupt * @retval 0 Specified interrupt does not happened * @retval 1 Specified interrupt happened * * @details The macro is used to get receiver buffer time-out interrupt status, transfer error interrupt status, * transmit buffer empty interrupt status or receive data reach interrupt status. * \hideinitializer */ #define SCUART_GET_INT_FLAG(sc, u32Type) (((sc)->INTSTS & (u32Type))? 1 : 0) /** * @brief Clear specified interrupt flag/status * * @param[in] sc The pointer of smartcard module. * @param[in] u32Type Interrupt flag/status to clear, only \ref SC_INTSTS_TERRIF_Msk valid for this macro. * * @return None * * @details The macro is used to clear transfer error interrupt flag. * \hideinitializer */ #define SCUART_CLR_INT_FLAG(sc, u32Type) ((sc)->INTSTS = (u32Type)) /** * @brief Get receive error flag/status * * @param[in] sc The pointer of smartcard module. * * @return Current receive error status, could one of following errors: * @retval SC_STATUS_PEF_Msk Parity error * @retval SC_STATUS_FEF_Msk Frame error * @retval SC_STATUS_BEF_Msk Break error * * @details The macro is used to get receiver parity error status, frame error status or break error status. * \hideinitializer */ #define SCUART_GET_ERR_FLAG(sc) ((sc)->STATUS & (SC_STATUS_PEF_Msk | SC_STATUS_FEF_Msk | SC_STATUS_BEF_Msk)) /** * @brief Clear specified receive error flag/status * * @param[in] sc The pointer of smartcard module. * @param[in] u32Mask Receive error flag/status to clear, combination following values * - \ref SC_STATUS_PEF_Msk * - \ref SC_STATUS_FEF_Msk * - \ref SC_STATUS_BEF_Msk * * @return None * * @details The macro is used to clear receiver parity error flag, frame error flag or break error flag. * \hideinitializer */ #define SCUART_CLR_ERR_FLAG(sc, u32Mask) ((sc)->STATUS = (u32Mask)) void SCUART_Close(SC_T *sc); uint32_t SCUART_Open(SC_T *sc, uint32_t u32Baudrate); uint32_t SCUART_Read(SC_T *sc, uint8_t pu8RxBuf[], uint32_t u32ReadBytes); uint32_t SCUART_SetLineConfig(SC_T *sc, uint32_t u32Baudrate, uint32_t u32DataWidth, uint32_t u32Parity, uint32_t u32StopBits); void SCUART_SetTimeoutCnt(SC_T *sc, uint32_t u32TOC); uint32_t SCUART_Write(SC_T *sc, uint8_t pu8TxBuf[], uint32_t u32WriteBytes); /**@}*/ /* end of group SCUART_EXPORTED_FUNCTIONS */ /**@}*/ /* end of group SCUART_Driver */ /**@}*/ /* end of group Standard_Driver */ #ifdef __cplusplus } #endif #endif /* __NU_SCUART_H__ */