/* * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Email Notes * 2022-04-16 Kevin.Liu kevin.liu.mchp@gmail.com First Release */ #include #include "atmel_start.h" #include "driver_init.h" #include "utils.h" #include "can_demo.h" #ifdef SAM_CAN_EXAMPLE #if defined(SOC_SAMC21) || defined(SOC_SAME54) #define CAN_HARDWARE (void *)CAN1 #elif defined(SOC_SAME70) #define CAN_HARDWARE (void *)MCAN1 #else #error "CAN undefined SOC Platform" #endif static volatile enum can_async_interrupt_type can_errors; static rt_sem_t can_txdone; static rt_sem_t can_rxdone; static rt_uint8_t can_stack[ 512 ]; static struct rt_thread can_thread; /** * @brief Callback function and should be invoked after call can_async_write. * * @note * * @param descr is CAN device description. * * @return None. */ static void can_tx_callback(struct can_async_descriptor *const descr) { rt_err_t result; rt_interrupt_enter(); result = rt_sem_release(can_txdone); if (RT_EOK != result) { #ifndef RT_USING_FINSH rt_kprintf("rt_sem_release failed in %s %d\r\n",__FUNCTION__, __LINE__); #endif } rt_interrupt_leave(); } /** * @brief Callback function and should be invoked after remote device send. * * @note This callback function will be called in CAN interrupt function * * @param descr is CAN device description. * * @return None. */ static void can_rx_callback(struct can_async_descriptor *const descr) { rt_err_t result; rt_interrupt_enter(); result = rt_sem_release(can_rxdone); if (RT_EOK != result) { #ifndef RT_USING_FINSH rt_kprintf("rt_sem_release failed in %s %d\r\n",__FUNCTION__, __LINE__); #endif } rt_interrupt_leave(); } /** * @brief Callback function and should be invoked after CAN device IRQ handler detects errors happened. * * @note This callback function will be called in CAN interrupt function * * @param descr is CAN device description. * * @return None. */ static void can_err_callback(struct can_async_descriptor *const descr, enum can_async_interrupt_type type) { rt_err_t result; if (type == CAN_IRQ_EW) { /* Error warning, Error counter has reached the error warning limit of 96, * An error count value greater than about 96 indicates a heavily disturbed * bus. It may be of advantage to provide means to test for this condition. */ } else if (type == CAN_IRQ_EA) { /* Error Active State, The CAN node normally take part in bus communication * and sends an ACTIVE ERROR FLAG when an error has been detected. */ } else if (type == CAN_IRQ_EP) { /* Error Passive State, The Can node goes into error passive state if at least * one of its error counters is greater than 127. It still takes part in bus * activities, but it sends a passive error frame only, on errors. */ } else if (type == CAN_IRQ_BO) { /* Bus Off State, The CAN node is 'bus off' when the TRANSMIT ERROR COUNT is * greater than or equal to 256. */ /* Suspend CAN task and re-initialize CAN module. */ can_errors = type; rt_interrupt_enter(); result = rt_sem_release(can_rxdone); if (RT_EOK != result) { #ifndef RT_USING_FINSH rt_kprintf("rt_sem_release failed in %s %d\r\n",__FUNCTION__, __LINE__); #endif } rt_interrupt_leave(); } else if (type == CAN_IRQ_DO) { /* Data Overrun in receive queue. A message was lost because the messages in * the queue was not reading and releasing fast enough. There is not enough * space for a new message in receive queue. */ /* Suggest to delete CAN task and re-initialize it. */ can_errors = type; rt_interrupt_enter(); result = rt_sem_release(can_rxdone); if (RT_EOK != result) { #ifndef RT_USING_FINSH rt_kprintf("rt_sem_release failed in %s %d\r\n",__FUNCTION__, __LINE__); #endif } rt_interrupt_leave(); } }; /** * @brief Initialize CAN module before task run. * * @note This function will set CAN Tx/Rx callback function and filters. * * @param None. * * @return None. */ static inline void can_demo_init(void) { struct can_filter filter; /** * CAN_Node0_tx_callback callback should be invoked after call * can_async_write, and remote device should receive message with ID=0x45A */ can_async_register_callback(&CAN_0, CAN_ASYNC_TX_CB, (FUNC_PTR)can_tx_callback); /** * CAN_0_rx_callback callback should be invoked after call * can_async_set_filter and remote device send CAN Message with the same * content as the filter. */ can_async_register_callback(&CAN_0, CAN_ASYNC_RX_CB, (FUNC_PTR)can_rx_callback); /* Should set at least one CAN standard & message filter before enable it. */ filter.id = 0x469; filter.mask = 0; can_async_set_filter(&CAN_0, 0, CAN_FMT_STDID, &filter); /* If set second standard message filter, should increase filter index * and filter algorithm * For example: index should set to 1, otherwise it will replace filter 0. * can_async_set_filter(&CAN_0, 1, CAN_FMT_STDID, &filter); */ filter.id = 0x10000096; filter.mask = 0; can_async_set_filter(&CAN_0, 0, CAN_FMT_EXTID, &filter); can_async_enable(&CAN_0); } /** * @brief CAN task. * * @note This task will waiting for CAN RX semaphore and then process input. * * @param parameter - task input parameter. * * @return None. */ static void can_thread_entry(void* parameter) { int32_t ret; rt_err_t result; uint8_t data[64]; uint32_t count=0; struct can_message msg; while (1) { #ifndef RT_USING_FINSH rt_kprintf("can task run count : %d\r\n",count); #endif count++; result = rt_sem_take(can_rxdone, RT_WAITING_FOREVER); if (RT_EOK != result) continue; do { /* Process the incoming packet. */ ret = can_async_read(&CAN_0, &msg); if (ret == ERR_NONE) { #ifndef RT_USING_FINSH rt_kprintf("CAN RX Message is % frame\r\n", msg.type == CAN_TYPE_DATA ? "data" : "remote"); rt_kprintf("CAN RX Message is % frame\r\n", msg.type == CAN_FMT_STDID ? "Standard" : "Extended"); rt_kprintf("can RX Message ID: 0x%X length: %d\r\n", msg.id, msg.len); rt_kprintf("CAN RX Message content: "); for (uint8_t i = 0; i < msg.len; i++) rt_kprintf("0x%02X ", data[i]); rt_kprintf("\r\n"); #endif } } while (ret == ERR_NONE); /* Get all data stored in CAN RX FIFO */ /* CAN task got CAN error message, handler CAN Error Status */ if ((can_errors == CAN_IRQ_BO) || (can_errors == CAN_IRQ_DO)) { can_async_init(&CAN_0, CAN_HARDWARE); } } } /** * @brief Call this function will to send a CAN message. * * @note * * @param msg - message to be sent, timeouts - wait timeouts for Tx completion. * * @return RT_OK or RT_ERROR. */ rt_err_t can_send_message(struct can_message *msg, rt_uint32_t timeouts) { rt_err_t result; if (RT_NULL == msg) { rt_kprintf("can_send_message input message error\r\n"); return RT_ERROR; } can_async_write(&CAN_0, msg); result = rt_sem_take(can_rxdone, timeouts); return result; } /** * @brief Call this function will create a CAN task. * * @note Should create Tx/Rx semaphore before run task. * * @param None. * * @return RT_OK or -RT_ERROR. */ rt_err_t can_demo_run(void) { rt_err_t result; can_rxdone = rt_sem_create("can_rx", 0, RT_IPC_FLAG_FIFO); if (RT_NULL == can_rxdone) { rt_kprintf("can_rx semaphore create failed\r\n"); return (-RT_ERROR); } can_txdone = rt_sem_create("can_tx", 0, RT_IPC_FLAG_FIFO); if (RT_NULL == can_txdone) { rt_kprintf("can_tx semaphore create failed\r\n"); return (-RT_ERROR); } can_demo_init(); /* initialize CAN thread */ result = rt_thread_init(&can_thread, "can", can_thread_entry, RT_NULL, (rt_uint8_t*)&can_stack[0], sizeof(can_stack), RT_THREAD_PRIORITY_MAX/3, 5); if (result == RT_EOK) { rt_thread_startup(&can_thread); } return result; } #endif /*@}*/