/* * Copyright (c) 2021-2023 HPMicro * * SPDX-License-Identifier: BSD-3-Clause * */ #ifndef _HPM_BOARD_H #define _HPM_BOARD_H #include #include "hpm_common.h" #include "hpm_soc.h" #include "hpm_soc_feature.h" #include "hpm_clock_drv.h" #include "hpm_enet_drv.h" #include "hpm_otp_drv.h" #include "hpm_lcdc_drv.h" #include "pinmux.h" #define BOARD_NAME "hpm6750evkmini" /* uart section */ #ifndef BOARD_RUNNING_CORE #define BOARD_RUNNING_CORE HPM_CORE0 #endif #ifndef BOARD_APP_UART_BASE #define BOARD_APP_UART_BASE HPM_UART0 #define BOARD_APP_UART_IRQ IRQn_UART0 #else #ifndef BOARD_APP_UART_IRQ #warning no IRQ specified for applicaiton uart #endif #endif #define BOARD_APP_UART_BAUDRATE (115200UL) #define BOARD_APP_UART_CLK_NAME clock_uart0 #ifndef BOARD_CONSOLE_TYPE #define BOARD_CONSOLE_TYPE CONSOLE_TYPE_UART #endif #if BOARD_CONSOLE_TYPE == CONSOLE_TYPE_UART #define BOARD_CONSOLE_BASE HPM_UART0 #define BOARD_CONSOLE_CLK_NAME clock_uart0 #define BOARD_CONSOLE_BAUDRATE (115200UL) #endif #define BOARD_FREEMASTER_UART_BASE HPM_UART0 #define BOARD_FREEMASTER_UART_IRQ IRQn_UART0 #define BOARD_FREEMASTER_UART_CLK_NAME clock_uart0 /* sdram section */ #define BOARD_SDRAM_ADDRESS (0x40000000UL) #define BOARD_SDRAM_SIZE (16*SIZE_1MB) #define BOARD_SDRAM_CS FEMC_SDRAM_CS0 #define BOARD_SDRAM_PORT_SIZE FEMC_SDRAM_PORT_SIZE_16_BITS #define BOARD_SDRAM_REFRESH_COUNT (4096UL) #define BOARD_SDRAM_REFRESH_IN_MS (64UL) #define BOARD_SDRAM_DATA_WIDTH_IN_BYTE (2UL) /* lcd section */ /* * BOARD_PANEL_TIMING_PARA {HSPW, HBP, HFP, VSPW, VBP, VFP, HSSP, VSSP, DESP, PDSP, PCSP} * * HSPW: Horizontal Synchronization Pulse width * HBP: Horizontal Back Porch * HFP: Horizontal Front Porch * VSPW: Vertical Synchronization Pulse width * VBP: Vertical Back Porch * VFP: Vertical Front Porch * HSSP: Horizontal Synchronization Signal Polarity, 0: High Active, 1: Low Active * VSSP: Vertical Synchronization Signal Polarity, 0: High Active, 1: Low Active * DESP: Data Enable Signal Polarity, 0: High Active, 1: Low Active * PDSP: Pixel Data Signal Polarity, 0: High Active, 1: Low Active * PCSP: Pixel Clock Signal Polarity, 0: High Active, 1: Low Active */ #define BOARD_PANEL_TIMEING_PARA_HSPW_INDEX 0 #define BOARD_PANEL_TIMEING_PARA_HBP_INDEX 1 #define BOARD_PANEL_TIMEING_PARA_HFP_INDEX 2 #define BOARD_PANEL_TIMEING_PARA_VSPW_INDEX 3 #define BOARD_PANEL_TIMEING_PARA_VBP_INDEX 4 #define BOARD_PANEL_TIMEING_PARA_VFP_INDEX 5 #define BOARD_PANEL_TIMEING_PARA_HSSP_INDEX 6 #define BOARD_PANEL_TIMEING_PARA_VSSP_INDEX 7 #define BOARD_PANEL_TIMEING_PARA_DESP_INDEX 8 #define BOARD_PANEL_TIMEING_PARA_PDSP_INDEX 9 #define BOARD_PANEL_TIMEING_PARA_PCSP_INDEX 10 #if defined(PANEL_TM070RDH13) #ifndef BOARD_LCD_WIDTH #define BOARD_LCD_WIDTH 800 #endif #ifndef BOARD_LCD_HEIGHT #define BOARD_LCD_HEIGHT 480 #endif #ifndef BOARD_PANEL_TIMING_PARA #define BOARD_PANEL_TIMING_PARA {10, 46, 50, 3, 23, 10, 0, 0, 0, 0, 0} #endif #else #ifndef BOARD_LCD_WIDTH #define BOARD_LCD_WIDTH 800 #endif #ifndef BOARD_LCD_HEIGHT #define BOARD_LCD_HEIGHT 480 #endif #ifndef BOARD_PANEL_TIMING_PARA #define BOARD_PANEL_TIMING_PARA {10, 46, 50, 3, 23, 10, 0, 0, 0, 0, 0} #endif #endif /* i2c section */ #define BOARD_APP_I2C_BASE HPM_I2C0 #define BOARD_APP_I2C_IRQ IRQn_I2C0 #define BOARD_APP_I2C_CLK_NAME clock_i2c0 #define BOARD_APP_I2C_SLAVE_BASE HPM_I2C3 #define BOARD_APP_I2C_SLAVE_IRQ IRQn_I2C3 #define BOARD_APP_I2C_SLAVE_CLK_NAME clock_i2c3 #define BOARD_CAM_I2C_BASE HPM_I2C0 #define BOARD_CAM_I2C_CLK_NAME clock_i2c0 #define BOARD_CAP_I2C_BASE (HPM_I2C0) #define BOARD_CAP_I2C_CLK_NAME clock_i2c0 #define BOARD_CAP_RST_GPIO (HPM_GPIO0) #define BOARD_CAP_RST_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_RST_GPIO_PIN (9) #define BOARD_CAP_RST_GPIO_IRQ (IRQn_GPIO0_B) #define BOARD_CAP_INTR_GPIO (HPM_GPIO0) #define BOARD_CAP_INTR_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_INTR_GPIO_PIN (8) #define BOARD_CAP_INTR_GPIO_IRQ (IRQn_GPIO0_B) #define BOARD_CAP_I2C_SDA_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_I2C_SDA_GPIO_PIN (10) #define BOARD_CAP_I2C_CLK_GPIO_INDEX (GPIO_DI_GPIOB) #define BOARD_CAP_I2C_CLK_GPIO_PIN (11) /* dma section */ #define BOARD_APP_XDMA_IRQ IRQn_XDMA #define BOARD_APP_HDMA_IRQ IRQn_HDMA /* gpio section */ #define BOARD_R_GPIO_CTRL HPM_GPIO0 #define BOARD_R_GPIO_INDEX GPIO_DI_GPIOB #define BOARD_R_GPIO_PIN 19 #define BOARD_G_GPIO_CTRL HPM_GPIO0 #define BOARD_G_GPIO_INDEX GPIO_DI_GPIOB #define BOARD_G_GPIO_PIN 18 #define BOARD_B_GPIO_CTRL HPM_GPIO0 #define BOARD_B_GPIO_INDEX GPIO_DI_GPIOB #define BOARD_B_GPIO_PIN 20 #define BOARD_LED_GPIO_CTRL BOARD_G_GPIO_CTRL #define BOARD_LED_GPIO_INDEX BOARD_G_GPIO_INDEX #define BOARD_LED_GPIO_PIN BOARD_G_GPIO_PIN #define BOARD_LED_OFF_LEVEL 1 #define BOARD_LED_ON_LEVEL 0 #define BOARD_APP_GPIO_INDEX GPIO_DI_GPIOZ #define BOARD_APP_GPIO_PIN 2 /* pinmux section */ #define USING_GPIO0_FOR_GPIOZ #ifndef USING_GPIO0_FOR_GPIOZ #define BOARD_APP_GPIO_CTRL HPM_BGPIO #define BOARD_APP_GPIO_IRQ IRQn_BGPIO #else #define BOARD_APP_GPIO_CTRL HPM_GPIO0 #define BOARD_APP_GPIO_IRQ IRQn_GPIO0_Z #endif /* gpiom section */ #define BOARD_APP_GPIOM_BASE HPM_GPIOM #define BOARD_APP_GPIOM_USING_CTRL HPM_FGPIO #define BOARD_APP_GPIOM_USING_CTRL_NAME gpiom_core0_fast /* spi section */ #define BOARD_APP_SPI_BASE HPM_SPI2 #define BOARD_APP_SPI_CLK_SRC_FREQ (24000000UL) #define BOARD_APP_SPI_SCLK_FREQ (1562500UL) #define BOARD_APP_SPI_ADDR_LEN_IN_BYTES (1U) #define BOARD_APP_SPI_DATA_LEN_IN_BITS (8U) /* Flash section */ #define BOARD_APP_XPI_NOR_XPI_BASE (HPM_XPI0) #define BOARD_APP_XPI_NOR_CFG_OPT_HDR (0xfcf90001U) #define BOARD_APP_XPI_NOR_CFG_OPT_OPT0 (0x00000007U) #define BOARD_APP_XPI_NOR_CFG_OPT_OPT1 (0x00000000U) /* lcd section */ #define BOARD_LCD_BASE HPM_LCDC #define BOARD_LCD_IRQ IRQn_LCDC_D0 #define BOARD_LCD_POWER_GPIO_BASE HPM_GPIO0 #define BOARD_LCD_POWER_GPIO_INDEX GPIO_DO_GPIOB #define BOARD_LCD_POWER_GPIO_PIN 12 #define BOARD_LCD_BACKLIGHT_GPIO_BASE HPM_GPIO0 #define BOARD_LCD_BACKLIGHT_GPIO_INDEX GPIO_DO_GPIOB #define BOARD_LCD_BACKLIGHT_GPIO_PIN 23 #ifndef BOARD_LCD_WIDTH #define BOARD_LCD_WIDTH (800) #endif #ifndef BOARD_LCD_HEIGHT #define BOARD_LCD_HEIGHT (480) #endif /* pdma section */ #define BOARD_PDMA_BASE HPM_PDMA /* enet section */ #define BOARD_ENET0_RST_GPIO #define BOARD_ENET0_RST_GPIO_INDEX #define BOARD_ENET0_RST_GPIO_PIN #define BOARD_ENET0_INF (0U) /* 0: RMII, 1: RGMII */ #define BOARD_ENET0_INT_REF_CLK (0U) #define BOARD_ENET0_PHY_RST_TIME (30) #if BOARD_ENET0_INF #define BOARD_ENET0_TX_DLY (0U) #define BOARD_ENET0_RX_DLY (0U) #endif #if __USE_ENET_PTP #define BOARD_ENET0_PTP_CLOCK (clock_ptp0) #endif #define BOARD_ENET1_RST_GPIO HPM_GPIO0 #define BOARD_ENET1_RST_GPIO_INDEX GPIO_DO_GPIOD #define BOARD_ENET1_RST_GPIO_PIN (15U) #define BOARD_ENET1_INF (0U) /* 0: RMII, 1: RGMII */ #define BOARD_ENET1_INT_REF_CLK (0U) #define BOARD_ENET1_PHY_RST_TIME (30) #if BOARD_ENET1_INF #define BOARD_ENET1_TX_DLY (0U) #define BOARD_ENET1_RX_DLY (0U) #endif #if __USE_ENET_PTP #define BOARD_ENET1_PTP_CLOCK (clock_ptp1) #endif /* adc section */ #define BOARD_APP_ADC12_BASE HPM_ADC0 #define BOARD_APP_ADC16_BASE HPM_ADC3 #define BOARD_APP_ADC12_IRQn IRQn_ADC0 #define BOARD_APP_ADC16_IRQn IRQn_ADC3 #define BOARD_APP_ADC_CH (0U) #define BOARD_APP_ADC_SEQ_DMA_SIZE_IN_4BYTES (1024U) #define BOARD_APP_ADC_PREEMPT_DMA_SIZE_IN_4BYTES (192U) #define BOARD_APP_ADC_PREEMPT_TRIG_LEN (1U) #define BOARD_APP_ADC_SINGLE_CONV_CNT (6) #define BOARD_APP_ADC_TRIG_PWMT0 HPM_PWM0 #define BOARD_APP_ADC_TRIG_PWMT1 HPM_PWM1 #define BOARD_APP_ADC_TRIG_TRGM0 HPM_TRGM0 #define BOARD_APP_ADC_TRIG_TRGM1 HPM_TRGM1 #define BOARD_APP_ADC_TRIG_PWM_SYNC HPM_SYNT /* * timer for board delay */ #define BOARD_DELAY_TIMER (HPM_GPTMR0) #define BOARD_DELAY_TIMER_CH 0 #define BOARD_DELAY_TIMER_CLK_NAME (clock_gptmr0) #define BOARD_CALLBACK_TIMER (HPM_GPTMR0) #define BOARD_CALLBACK_TIMER_CH 1 #define BOARD_CALLBACK_TIMER_IRQ IRQn_GPTMR0 #define BOARD_CALLBACK_TIMER_CLK_NAME (clock_gptmr0) /* SDXC section */ #define BOARD_APP_SDCARD_SDXC_BASE (HPM_SDXC1) #define BOARD_APP_SDCARD_SUPPORT_1V8 (0) /* USB section */ #define BOARD_USB0_VBUS_PORT (HPM_GPIO0) #define BOARD_USB0_VBUS_GPIO_INDEX (GPIO_DO_GPIOF) #define BOARD_USB0_VBUS_GPIO_PIN (9) #define BOARD_USB0_OC_PORT (HPM_GPIO0) #define BOARD_USB0_OC_GPIO_INDEX (GPIO_DI_GPIOF) #define BOARD_USB0_OC_GPIO_PIN (8) /* APP PWM */ #define BOARD_APP_PWM HPM_PWM0 #define BOARD_APP_PWM_CLOCK_NAME clock_mot0 #define BOARD_APP_PWM_OUT1 4 #define BOARD_APP_PWM_OUT2 5 #define BOARD_APP_TRGM HPM_TRGM0 /* RGB LED Section */ #define BOARD_RED_PWM_IRQ IRQn_PWM1 #define BOARD_RED_PWM HPM_PWM1 #define BOARD_RED_PWM_OUT 0 #define BOARD_RED_PWM_CMP 0 #define BOARD_RED_PWM_CMP_INITIAL_ZERO true #define BOARD_RED_PWM_CLOCK_NAME clock_mot1 #define BOARD_GREEN_PWM_IRQ IRQn_PWM1 #define BOARD_GREEN_PWM HPM_PWM1 #define BOARD_GREEN_PWM_OUT 1 #define BOARD_GREEN_PWM_CMP 1 #define BOARD_GREEN_PWM_CMP_INITIAL_ZERO true #define BOARD_GREEN_PWM_CLOCK_NAME clock_mot1 #define BOARD_BLUE_PWM_IRQ IRQn_PWM0 #define BOARD_BLUE_PWM HPM_PWM0 #define BOARD_BLUE_PWM_OUT 7 #define BOARD_BLUE_PWM_CMP 0 #define BOARD_BLUE_PWM_CMP_INITIAL_ZERO true #define BOARD_BLUE_PWM_CLOCK_NAME clock_mot0 /* Beep Section */ #define BOARD_BEEP_PWM HPM_PWM3 #define BOARD_BEEP_PWM_OUT 4 #define BOARD_BEEP_PWM_CLOCK_NAME clock_mot3 #define BOARD_CPU_FREQ (816000000UL) #ifndef BOARD_SHOW_CLOCK #define BOARD_SHOW_CLOCK 1 #endif #ifndef BOARD_SHOW_BANNER #define BOARD_SHOW_BANNER 1 #endif #ifndef BOARD_RUNNING_CORE #define BOARD_RUNNING_CORE 0 #endif #if defined(__cplusplus) extern "C" { #endif /* __cplusplus */ typedef void (*board_timer_cb)(void); void board_init(void); void board_init_console(void); void board_init_uart(UART_Type *ptr); void board_init_i2c(I2C_Type *ptr); void board_init_lcd(void); void board_panel_para_to_lcdc(lcdc_config_t *config); void board_init_can(CAN_Type *ptr); uint32_t board_init_femc_clock(void); void board_init_sdram_pins(void); void board_init_gpio_pins(void); void board_init_spi_pins(SPI_Type *ptr); void board_init_led_pins(void); /* cap touch */ void board_init_cap_touch(void); void board_led_write(bool state); void board_led_toggle(void); void board_fpga_power_enable(void); void board_init_cam_pins(void); /* Initialize SoC overall clocks */ void board_init_clock(void); /* Initialize the CAM(camera) dot clock */ uint32_t board_init_cam_clock(CAM_Type *ptr); /* Initialize the LCD pixel clock */ uint32_t board_init_lcd_clock(void); uint32_t board_init_uart_clock(UART_Type *ptr); uint32_t board_init_spi_clock(SPI_Type *ptr); uint32_t board_init_adc12_clock(ADC12_Type *ptr); uint32_t board_init_adc16_clock(ADC16_Type *ptr); uint32_t board_init_can_clock(CAN_Type *ptr); uint32_t board_init_i2s_clock(I2S_Type *ptr); uint32_t board_init_pdm_clock(void); uint32_t board_init_dao_clock(void); uint32_t board_init_gptmr_clock(GPTMR_Type *ptr); void board_init_sd_pins(SDXC_Type *ptr); uint32_t board_sd_configure_clock(SDXC_Type *ptr, uint32_t freq); void board_sd_switch_pins_to_1v8(SDXC_Type *ptr); void board_sd_power_switch(SDXC_Type *ptr, bool on_off); bool board_sd_detect_card(SDXC_Type *ptr); void board_init_usb_pins(void); void board_usb_vbus_ctrl(uint8_t usb_index, uint8_t level); /* * @brief Initialize PMP and PMA for but not limited to the following purposes: * -- non-cacheable memory initialization */ void board_init_pmp(void); void board_delay_ms(uint32_t ms); void board_init_beep_pwm_pins(void); void board_init_rgb_pwm_pins(void); void board_timer_create(uint32_t ms, void *cb); hpm_stat_t board_init_enet_pins(ENET_Type *ptr); hpm_stat_t board_init_enet_rmii_reference_clock(ENET_Type *ptr, bool internal); hpm_stat_t board_reset_enet_phy(ENET_Type *ptr); uint8_t board_enet_get_dma_pbl(ENET_Type *ptr); hpm_stat_t board_init_enet_ptp_clock(ENET_Type *ptr); #if defined(__cplusplus) } #endif /* __cplusplus */ #endif /* _HPM_BOARD_H */