[中文](README.md) | **English** ## Overview The CV18xx series of chips are high-performance, low-power chips launched for various products in the field of civilian consumer surveillance IP cameras, smart homes, and more. These chips integrate H.264/H.265 video compression encoders, as well as ISP; they support various image enhancement and correction algorithms such as digital wide dynamic range, 3D noise reduction, defogging, and lens distortion correction, providing customers with professional-level video image quality. 1. Processor Core - Main Processor: RISC-V C906 @ 1.0Ghz - 32KB I-cache, 64KB D-Cache - Integrated Vector and Floating-Point Unit (FPU). - Co-processor: RISC-V C906 @ 700Mhz - Integrated Floating-Point Unit (FPU) 2. Storage Interface - Built-in DRAM: DDR2 16bitx1, with a maximum speed of 1333Mbps, and a capacity of 512Mbit (64MB) - Support for SPI NOR flash interface (1.8V / 3.0V) - Supports 1, 2, 4 line modes - Maximum support of 256MByte - Support for SPI Nand flash interface (1.8V / 3.0V) - Supports 1KB/2KB/4KB page (corresponding to maximum capacity of 16GB/32GB/64GB) - Utilizes the device's built-in ECC module 3. Peripherals - Up to 26 GPIO pins on the MilkV-Duo 40-pin header provide access to internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART - Up to 3x I2C - Up to 5x UART - Up to 1x SDIO1 - Up to 1x SPI - Up to 2x ADC - Up to 7x PWM - Up to 1x RUN - Up to 1x JTAG - Integrated MAC PHY supports 10/100Mbps full or half duplex mode - One USB host/device interface ## Toolchain Download 1. RT-Thread Standard Edition Toolchain: `riscv64-unknown-elf-gcc` Download Link [https://occ-oss-prod.oss-cn-hangzhou.aliyuncs.com/resource//1705395512373/Xuantie-900-gcc-elf-newlib-x86_64-V2.8.1-20240115.tar.gz](https://occ-oss-prod.oss-cn-hangzhou.aliyuncs.com/resource//1705395512373/Xuantie-900-gcc-elf-newlib-x86_64-V2.8.1-20240115.tar.gz) 2. RT-Smart Edition Toolchain: `riscv64-unknown-linux-musl-gcc` Download Link [https://github.com/RT-Thread/toolchains-ci/releases/download/v1.7/riscv64-linux-musleabi_for_x86_64-pc-linux-gnu_latest.tar.bz2](https://github.com/RT-Thread/toolchains-ci/releases/download/v1.7/riscv64-linux-musleabi_for_x86_64-pc-linux-gnu_latest.tar.bz2) > Note: The current bsp only supports Linux compilation, and it is recommended to use Ubuntu 22.04 After correctly extracting, add the local path of the `riscv64-unknown-elf-gcc` or `riscv64-unknown-linux-musl-gcc` toolchain to `EXEC_PATH` in `rtconfig.py` or specify the path through the `RTT_EXEC_PATH` environment variable. ```shell # For RT-Thread Standard Edition, use the following configuration: $ export RTT_CC_PREFIX=riscv64-unknown-elf- $ export RTT_EXEC_PATH=/opt/Xuantie-900-gcc-elf-newlib-x86_64-V2.8.1/bin # For RT-Smart Edition, use the following configuration: $ export RTT_CC_PREFIX=riscv64-unknown-linux-musl- $ export RTT_EXEC_PATH=/opt/riscv64-linux-musleabi_for_x86_64-pc-linux-gnu/bin ``` ## Compilation ### Dependency Installation ```shell $ sudo apt install -y scons libncurses5-dev device-tree-compiler ``` ## Modify Current Project Configuration For the Linux platform, execute: ```shell $ scons --menuconfig ``` 1. By default, compile as RT-Thread Standard Edition. If you need to compile as RT-Smart Edition, modify as follows: ```shell RT-Thread Kernel ---> [*] Enable RT-Thread Smart (microkernel on kernel/userland) (0x80000000) The virtual address of kernel start ``` 2. Select the current target development board type: ```shell Board Type (milkv-duo) ---> ( ) milkv-duo ( ) milkv-duo-spinor (X) milkv-duo256m ( ) milkv-duo256m-spinor ``` It will automatically download relevant scripts to the ~/.env directory, then execute: ```shell $ source ~/.env/env.sh $ pkgs --update ``` After updating the software package, execute `scons -j10` or `scons -j10 --verbose` to compile this board support package. If the compilation is successful, an rtthread.elf file will be generated. After the compilation is complete, the script automatically calls the `./mksdimg.sh` script to package and generate `boot.sd`, which is the kernel file for SD card startup. ## Running 1. Divide the SD card into 2 partitions, with the first partition used to store bin files, and the second partition used as a data storage partition, with `FAT32` format. 2. Copy the `fip.bin` and `boot.sd` files from the root directory to the first partition of the SD card. Subsequent firmware updates only require copying the `boot.sd` file. Where: - fip.bin: fsbl, opensbi, and uboot packaged bin file - boot.sd: kernel packaged bin file After updating `boot.sd`, restart to see the serial port output: ```shell U-Boot 2021.10 (Jun 26 2023 - 14:09:06 +0800)cvitek_cv180x DRAM: 63.3 MiB gd->relocaddr=0x82435000. offset=0x2235000 MMC: cv-sd@4310000: 0 Loading Environment from ... OK In: serial Out: serial Err: serial Net: Warning: ethernet@4070000 (eth0) using random MAC address - 62:80:19:6c:d4:64 eth0: ethernet@4070000 Hit any key to stop autoboot: 0 Boot from SD ... switch to partitions #0, OK mmc0 is current device 132692 bytes read in 12 ms (10.5 MiB/s) ## Loading kernel from FIT Image at 81400000 ... Using 'config-cv1800b_milkv_duo_sd' configuration Trying 'kernel-1' kernel subimage Verifying Hash Integrity ... crc32+ OK ## Loading fdt from FIT Image at 81400000 ... Using 'config-cv1800b_milkv_duo_sd' configuration Trying 'fdt-cv1800b_milkv_duo_sd' fdt subimage Verifying Hash Integrity ... sha256+ OK Booting using the fdt blob at 0x8141b590 Uncompressing Kernel Image Decompressing 296768 bytes used 42ms Loading Device Tree to 0000000081be5000, end 0000000081becb60 ... OK Starting kernel ... heap: [0x802766b0 - 0x812766b0] \ | / - RT - Thread Operating System / | \ 5.1.0 build Apr 7 2024 23:33:20 2006 - 2024 Copyright by RT-Thread team Hello RISC-V! msh /> ```