/* * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2020-11-28 bigmagic first version */ #include "drv_i2c.h" #include "drv_gpio.h" #include "raspi4.h" #include "mbox.h" /* * (3.3v) -1 2- * (SDA1/SDA3) -3 4- * (SCL1/SCL3) -5 6- * (SDA3) -7 8- * -9 10- * -11 12- * -13 14- * -15 16- * -17 18- * -19 20- * (SCL4) -21 22- * -23 24- (SDA4) * -25 26- (SCL4) * -27 28- * (SCL3) -29 30- * (SDA4) -31 32- */ #define DBG_TAG "drv.i2c" #define DBG_LVL DBG_INFO #include struct raspi_i2c_hw_config { rt_uint32_t bsc_num; rt_uint32_t bsc_rate; rt_uint32_t bsc_address; rt_uint32_t sda_pin; rt_uint32_t scl_pin; rt_uint32_t sda_mode; rt_uint32_t scl_mode; }; rt_uint8_t i2c_read_or_write(volatile rt_uint32_t base, rt_uint8_t* buf, rt_uint32_t len, rt_uint8_t flag) { rt_uint32_t status; rt_uint32_t remaining = len; rt_uint32_t i = 0; rt_uint8_t reason = I2C_REASON_OK; /* Clear FIFO */ BSC_C(base) |= (BSC_C_CLEAR_1 & BSC_C_CLEAR_1); /* Clear Status */ BSC_S(base) = BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE; /* Set Data Length */ BSC_DLEN(base) = len; if (flag) { /* Start read */ BSC_C(base) = BSC_C_I2CEN | BSC_C_ST | BSC_C_READ; /* wait for transfer to complete */ while (!(BSC_S(base) & BSC_S_DONE)) { /* we must empty the FIFO as it is populated and not use any delay */ while (remaining && (BSC_S(base) & BSC_S_RXD)) { /* Read from FIFO, no barrier */ buf[i] = BSC_FIFO(base); i++; remaining--; } } /* transfer has finished - grab any remaining stuff in FIFO */ while (remaining && (BSC_S(base) & BSC_S_RXD)) { /* Read from FIFO, no barrier */ buf[i] = BSC_FIFO(base); i++; remaining--; } } else { LOG_D("i2c%d write start", flag); /* pre populate FIFO with max buffer */ while (remaining && (i < BSC_FIFO_SIZE)) { BSC_FIFO(base) = buf[i]; i++; remaining--; } /* Enable device and start transfer */ BSC_C(base) = BSC_C_I2CEN | BSC_C_ST; /* Transfer is over when BCM2835_BSC_S_DONE */ while (!(BSC_S(base) & BSC_S_DONE)) { while (remaining && (BSC_S(base) & BSC_S_TXD)) { /* Write to FIFO */ BSC_FIFO(base) = buf[i]; i++; remaining--; } } LOG_D("i2c%d write end", flag); } status = BSC_S(base); if (status & BSC_S_ERR) { reason = I2C_REASON_ERROR_NACK; } else if (status & BSC_S_CLKT) { reason = I2C_REASON_ERROR_CLKT; } else if (remaining) { reason = I2C_REASON_ERROR_DATA; } BSC_C(base) |= (BSC_S_DONE & BSC_S_DONE); return reason; } static rt_size_t raspi_i2c_mst_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num) { rt_size_t i; rt_uint8_t reason; RT_ASSERT(bus != RT_NULL); struct raspi_i2c_hw_config *i2c_hw_config = (struct raspi_i2c_hw_config*)(bus->priv); //Slave Address BSC_A(i2c_hw_config->bsc_address) = msgs->addr; for (i = 0; i < num; i++) { if (msgs[i].flags & RT_I2C_RD) reason = i2c_read_or_write(i2c_hw_config->bsc_address, msgs->buf, msgs->len, 1); else reason = i2c_read_or_write(i2c_hw_config->bsc_address, msgs->buf, msgs->len, 0); } return (reason == 0)? i : 0; } static rt_size_t raspi_i2c_slv_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num) { return 0; } static rt_err_t raspi_i2c_bus_control(struct rt_i2c_bus_device *bus, rt_uint32_t cmd, rt_uint32_t arg) { return RT_EOK; } static rt_err_t raspi_i2c_configure(struct raspi_i2c_hw_config *cfg) { RT_ASSERT(cfg != RT_NULL); rt_uint32_t apb_clock = 0; prev_raspi_pin_mode(cfg->sda_pin, cfg->sda_mode);//sda prev_raspi_pin_mode(cfg->scl_pin, cfg->scl_mode);//scl /* use 0xFFFE mask to limit a max value and round down any odd number */ apb_clock = bcm271x_mbox_clock_get_rate(CORE_CLK_ID); rt_uint32_t divider = (apb_clock / cfg->bsc_rate) & 0xFFFE; BSC_DIV(cfg->bsc_address) = (rt_uint16_t)divider; return RT_EOK; } static const struct rt_i2c_bus_device_ops raspi_i2c_ops = { .master_xfer = raspi_i2c_mst_xfer, .slave_xfer = raspi_i2c_slv_xfer, .i2c_bus_control = raspi_i2c_bus_control, }; #if defined (BSP_USING_I2C0) #define I2C0_BUS_NAME "i2c0" static struct raspi_i2c_hw_config hw_device0 = { .bsc_num = 0, .bsc_rate = 100000,//100k .bsc_address = BSC0_BASE, .sda_pin = GPIO_PIN_0, .scl_pin = GPIO_PIN_1, .sda_mode = ALT0, .scl_mode = ALT0, }; struct rt_i2c_bus_device device0 = { .ops = &raspi_i2c_ops, .priv = (void *)&hw_device0, }; #endif #if defined (BSP_USING_I2C1) #define I2C1_BUS_NAME "i2c1" static struct raspi_i2c_hw_config hw_device1 = { .bsc_num = 1, .bsc_rate = 100000,//100k .bsc_address = BSC1_BASE, .sda_pin = GPIO_PIN_2, .scl_pin = GPIO_PIN_3, .sda_mode = ALT0, .scl_mode = ALT0, }; struct rt_i2c_bus_device device1 = { .ops = &raspi_i2c_ops, .priv = (void *)&hw_device1, }; #endif #if defined (BSP_USING_I2C3) #define I2C3_BUS_NAME "i2c3" static struct raspi_i2c_hw_config hw_device3 = { .bsc_num = 3, .bsc_rate = 100000,//100k .bsc_address = BSC3_BASE, #ifndef BSP_USING_I2C3_0 .sda_pin = GPIO_PIN_2, .scl_pin = GPIO_PIN_3, #else .sda_pin = GPIO_PIN_4, .scl_pin = GPIO_PIN_5, #endif .sda_mode = ALT5, .scl_mode = ALT5, }; struct rt_i2c_bus_device device3 = { .ops = &raspi_i2c_ops, .priv = (void *)&hw_device3, }; #endif #if defined (BSP_USING_I2C4) #define I2C4_BUS_NAME "i2c4" static struct raspi_i2c_hw_config hw_device4 = { .bsc_num = 4, .bsc_rate = 100000,//100k .bsc_address = BSC4_BASE, #ifdef BSP_USING_I2C4_0 .sda_pin = GPIO_PIN_6, .scl_pin = GPIO_PIN_7, #else .sda_pin = GPIO_PIN_8, .scl_pin = GPIO_PIN_9, #endif .sda_mode = ALT5, .scl_mode = ALT5, }; struct rt_i2c_bus_device device4 = { .ops = &raspi_i2c_ops, .priv = (void *)&hw_device4, }; #endif #if defined (BSP_USING_I2C5) #define I2C5_BUS_NAME "i2c5" static struct raspi_i2c_hw_config hw_device5 = { .bsc_num = 5, .bsc_rate = 100000,//100k .bsc_address = BSC5_BASE, #ifdef BSP_USING_I2C5_0 .sda_pin = GPIO_PIN_10, .scl_pin = GPIO_PIN_11, #else .sda_pin = GPIO_PIN_12, .scl_pin = GPIO_PIN_13, #endif .sda_mode = ALT5, .scl_mode = ALT5, }; struct rt_i2c_bus_device device5 = { .ops = &raspi_i2c_ops, .priv = (void *)&hw_device5, }; #endif #if defined (BSP_USING_I2C6) #define I2C6_BUS_NAME "i2c6" static struct raspi_i2c_hw_config hw_device6 = { .bsc_num = 6, .bsc_rate = 100000,//100k .bsc_address = BSC6_BASE, #ifdef BSP_USING_I2C5_0 .sda_pin = GPIO_PIN_0, .scl_pin = GPIO_PIN_1, #else .sda_pin = GPIO_PIN_22, .scl_pin = GPIO_PIN_23, #endif .sda_mode = ALT5, .scl_mode = ALT5, }; struct rt_i2c_bus_device device6 = { .ops = &raspi_i2c_ops, .priv = (void *)&hw_device6, }; #endif int rt_hw_i2c_init(void) { #if defined(BSP_USING_I2C0) raspi_i2c_configure(&hw_device0); rt_i2c_bus_device_register(&device0, I2C0_BUS_NAME); #endif #if defined(BSP_USING_I2C1) raspi_i2c_configure(&hw_device1); rt_i2c_bus_device_register(&device1, I2C1_BUS_NAME); #endif #if defined(BSP_USING_I2C3) raspi_i2c_configure(&hw_device3); rt_i2c_bus_device_register(&device3, I2C3_BUS_NAME); #endif #if defined(BSP_USING_I2C4) raspi_i2c_configure(&hw_device4); rt_i2c_bus_device_register(&device4, I2C4_BUS_NAME); #endif #if defined(BSP_USING_I2C5) raspi_i2c_configure(&hw_device5); rt_i2c_bus_device_register(&device5, I2C5_BUS_NAME); #endif #if defined(BSP_USING_I2C6) raspi_i2c_configure(&hw_device6); rt_i2c_bus_device_register(&device6, I2C6_BUS_NAME); #endif return 0; } INIT_DEVICE_EXPORT(rt_hw_i2c_init);