/* * Copyright (c) 2006-2024, RT-Thread Development Team * Copyright (c) 2019-2020, Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2024-02-06 yandld first implementation */ #include #include #include "board.h" #include "clock_config.h" #include "drv_uart.h" /** * This is the timer interrupt service routine. * */ void SysTick_Handler(void) { /* enter interrupt */ rt_interrupt_enter(); rt_tick_increase(); /* leave interrupt */ rt_interrupt_leave(); } /** * This function will initial board. */ void rt_hw_board_init() { BOARD_InitBootPins(); /* This init has finished in secure side of TF-M */ BOARD_InitBootClocks(); SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND); /* set pend exception priority */ NVIC_SetPriority(PendSV_IRQn, (1 << __NVIC_PRIO_BITS) - 1); /*init uart device*/ rt_hw_uart_init(); #if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE) rt_console_set_device(RT_CONSOLE_DEVICE_NAME); #endif #ifdef RT_USING_COMPONENTS_INIT /* initialization board with RT-Thread Components */ rt_components_board_init(); #endif #ifdef RT_USING_HEAP rt_kprintf("sram heap, begin: 0x%p, end: 0x%p\n", HEAP_BEGIN, HEAP_END); rt_system_heap_init((void *)HEAP_BEGIN, (void *)(HEAP_END)); #endif } /** * This function will called when memory fault. */ void MemManage_Handler(void) { extern void HardFault_Handler(void); rt_kprintf("Memory Fault!\n"); HardFault_Handler(); } void rt_hw_us_delay(rt_uint32_t us) { rt_uint32_t ticks; rt_uint32_t told, tnow, tcnt = 0; rt_uint32_t reload = SysTick->LOAD; ticks = us * reload / (1000000 / RT_TICK_PER_SECOND); told = SysTick->VAL; while (1) { tnow = SysTick->VAL; if (tnow != told) { if (tnow < told) { tcnt += told - tnow; } else { tcnt += reload - tnow + told; } told = tnow; if (tcnt >= ticks) { break; } } } }