# Seeed Wio-Terminal BSP Introduction [中文](README_zh.md) ![](https://static.getiot.tech/WioT-Hardware-Overview.png) - MCU: ATSAMD51P19A @120MHz, 512KB FLASH, 192KB RAM - D51: Cortex-M4F + Adavanced Feature Set - Pin: G=48 pins, J=64 pins, N=100 pins, P=128 pins - Flash: 18=256KB, 19=512KB, 20=1024KB (size=2^n) - SRAM : 128KB(Flash 256KB), 192KB(Flash 512KB), 256KB(Flash 1MB) - Datasheet: #### KEY FEATURES #### Core - 32-bit Arm® Cortex®-M4 core with single-precision FPU and 4 KB combined instruction cache and data cache; frequency up to 120 MHz, MPU, 403 CoreMark® at 120 MHz, and DSP instructions #### Memories - 1 MB/512 KB/256 KB in-system self-programmable Flash with: - Error Correction Code (ECC) - Dual bank with Read-While-Write (RWW) support - EEPROM hardware emulation - 128 KB, 192 KB, 256 KB SRAM main memory - 64 KB, 96 KB, 128 KB of Error Correction Code (ECC) RAM option - Up to 4 KB of Tightly Coupled Memory (TCM) - Up to 8 KB additional SRAM - Can be retained in backup mode - Eight 32-bit backup registers #### System - Power-on Reset (POR) and Brown-out detection (BOD) - Internal and external clock options - External Interrupt Controller (EIC) - 16 external interrupts - One non-maskable interrupt - Two-pin Serial Wire Debug (SWD) programming, test, and debugging interface #### High-Performance Peripherals - 32-channel Direct Memory Access Controller (DMAC) - Up to two SD/MMC Host Controller (SDHC) - Up to 50 MHz operation - 4-bit or 1-bit interface - Compatibility with SD and SDHC memory card specification version 3.01 - Compatibility with SDIO specification version 3.0 - Compliant with JDEC specification, MMC memory cards V4.51 - One Quad I/O Serial Peripheral Interface (QSPI) - Dedicated AHB memory zone - One Ethernet MAC (SAM E53 and SAM E54)– 10/100 Mbps in MII and RMII with dedicated DMA - IEEE® 1588 Precision Time Protocol (PTP) support - IEEE 1588 Time Stamping Unit (TSU) support - IEEE802.3AZ energy efficiency support - Support for 802.1AS and 1588 precision clock synchronization protocol - Wake on LAN support - Up to two Controller Area Network (CAN) (that is., SAM E51 and SAM E54) - Support for CAN 2.0A/CAN 2.0B and CAN-FD (ISO 11898-1:2016) - One Full-Speed (12 Mbps) Universal Serial Bus (USB) 2.0 interface - Embedded host and device function - Eight endpoints - On-chip transceiver with integrated serial resistor #### System Peripherals - Up to 114 I/O lines with external interrupt capability (edge- or level-sensitivity), debouncing, glitch filtering and On-die Series Resistor Termination - Five Parallel Input/Output Controllers (PIO) - 32-channel Event System - Up to eight Serial Communication Interfaces (SERCOM), can be configured as USART/I2C/SPI - Up to eight 16-bit Timers/Counters (TC), can be configured as 8/16/32bit TC. - Two 24-bit Timer/Counters for Control (TCC), with extended functions - Up to Three 16-bit Timer/Counters for Control (TCC) with extended functions. - 32-bit Real Time Counter (RTC) with clock/calendar function - Up to 4 wake-up pins with tamper detection and debouncing filter - Watchdog Timer (WDT) with Window mode - CRC-32 generator - One two-channel Inter-IC Sound Interface (I2S) - Position Decoder (PDEC) - Frequency meter (FREQM) - Four Configurable Custom Logic (CCL) - Dual 12-bit, 1 MSPS Analog-to-Digital Converter (ADC) with up to 16 channels each: - Dual 12-bit, 1 MSPS output Digital-to-Analog Converter (DAC) - Two Analog Comparators (AC) with Window Compare function - One temperature sensor - Parallel Capture Controller (PCC) - Peripheral Touch Controller (PTC) - Capacitive Touch buttons, sliders, and wheels #### Cryptography - One Advanced Encryption System (AES) with 256-bit key length and up to 2 MB/s data rate - Five confidential modes of operation (ECB, CBC, CFB, OFB, CTR) - Supports counter with CBC-MAC mode - Galois Counter Mode (GCM) - True Random Number Generator (TRNG) - Public Key Cryptography Controller (PUKCC) and associated Classical Public Key Cryptography Library (PUKCL) - RSA, DSA : Elliptic Curves Cryptography (ECC) ECC GF(2n), ECC GF(p) - Integrity Check Module (ICM) based on Secure Hash Algorithm (SHA1, SHA224, SHA256), DMA assisted #### I/O - Up to 99 programmable I/O pins #### Qualification - AEC-Q100 Grade 1 (-40°C to 125°C) #### Package Type - VQFN48, 48-lead VQFN, 7x7 mm, pitch 0.5 mm, I/O Pins up to 37 - VQFN64, 64-lead VQFN, 9x9 mm, pitch 0.5 mm, I/O Pins up to 51 - TQFP64, 64-lead TQFP, 10x10 mm, pitch 0.5 mm, I/O Pins up to 51 - TQFP100, 100-lead TQFP, 14x14 mm, pitch 0.5 mm, I/O Pins up to 81 - TQFP128, 128-lead TQFP, 14x14 mm, pitch 0.4 mm, I/O Pins up to 99 - TFBGA120, 120-ball TFBGA, 8x8 mm, pitch 0.5 mm, I/O Pins up to 90 #### Board info - [Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi Dev Board](https://www.seeedstudio.com/Wio-Terminal-p-4509.html) #### Contact Info - [luhuadong](https://github.com/luhuadong),