27da0f0472
format .icf, .lds, .sct
2023-03-20 00:04:51 -04:00
c3820a2c1b
format sconscript Kconfig files
2023-03-19 07:08:27 -04:00
e94a3bf52c
[imxrt1060] Update 1060 sdk 2.12.1 ( #6892 )
...
更新的SDK2.12.1更新imxrt1060的驱动
2023-02-06 22:17:31 -05:00
592284c66c
format link scripts
2023-01-08 22:52:13 -05:00
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
814b1abb08
增加双网口配置选项，增加phy8211F 驱动 ( #6278 )
...
* Update Kconfig
增加RT1170双路网络选项
* Update SConscript
增加RTL8211F驱动选项支持
* Update SConstruct
去掉外设目录
* Add files via upload
增加PHY芯片RTL8211F驱动
* Update drv_rtl8211f.c
* format code
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-14 23:21:27 -04:00
0ac8f72037
[lvgl] remove suareline studio specific support for imxrt1060 ( #6261 )
...
* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes
* [lvgl] remove specific suppport for imxrt1060
https://github.com/lvgl/lvgl/pull/3566
2022-08-13 22:02:41 -04:00
656f0e3d23
[imxrt1060] fix a tiny problme
...
this is report in slack group:
- I had to do a small fix in board/linker_scripts/link.lds file.
line 81, should be:
ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data);
(add a space between ivt_begin and "=“).
- For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig
Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.
2022-08-13 21:56:04 -04:00
c49c5a4d06
Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high.
2022-08-08 01:30:39 -04:00
226b3e1979
[bsp/imxrt/imxrt/imxrt1060-nxp-evk] ( #6195 )
...
Fix BSP bugs:
-Added Touch INT GPIO Init code to pin_mux.c
-Added new delay code for touch/video driver, using the rt-thread delay, in touchpad.c/.h
2022-07-30 02:06:09 -04:00
880fc2f59a
[imxrt 1060] support touchpad
...
Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-19 14:03:20 +08:00
a0bfbe8d90
[imxrt1060]support NXP GUiGuider
2022-05-13 14:12:15 +08:00
e037b7684e
prepare to support squareline studio
2022-05-09 09:56:27 +08:00
907ee070dd
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-09 09:56:27 +08:00
a0f8d43744
[gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM ( #5802 )
...
* [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM
2022-04-20 09:56:04 +08:00
3b1445d49c
[bsp][imxrt1060]fix gcc can't runing issue. ( #5667 )
2022-03-14 22:54:12 +08:00
d53ff73615
add README_zh.md、led blink ( #5666 )
2022-03-11 18:26:56 +08:00
e484ff5942
添加 imxrt1060-evk BSP ( #5657 )
...
* 添加 imxrt1060-evk BSP
* add LVGL
* add README.md
* Delete irrelevant files
* Modify the optimization level to O1
* Organize documents
* Source code formatting
2022-03-11 12:13:56 +08:00
Meco Man
xiao xie
guo
Isaac Rose
Not Black Magic
Ting Liu
Rbb666