* Fix building issue of Nuvoton porting.
1. Change thread priority of lwip-tcpip and erx.
2. Remove '')' garbage symbols.
3. mm driver issues.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
版本控制规范：https://semver.org/
目前的版本子号不是很规范，其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION 4L /**< major version number */
#define RT_SUBVERSION 1L /**< minor version number */
#define RT_REVISION 1L /**< revise version number */
```
参考ESP32：
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR 2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR 0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH 3
```
建议改成：
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR 4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR 2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH 0
```
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
* update
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
* bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin
* feature,add gd32_spi's alt_func_num member for different spi periph's gpio
* feature,add spi3,spi4,and support multi spi devices
* feature,add rt_hw_spi_device_attach api
* tested on the gd32f450i-eval board
1. Remove dfs_posix.h including for syncing 4.1.0.
2. Fix issue in crypto driver.
3. Add LVGLv81 supporting in NuMaker-M2354 BSP.
4. Update USB board menu in M480 BSP.
* Update drivers.
1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.
* [Nuvoton] Update drivers.
1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.
* Update menu-option.
1. Set BOARD_USING_LCM is on by default.
2. Fix default value setting in choice-option.
* Fix control function in I2C driver.
* Add sdk_dist.py and ADC touching calibration function.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
1. Add RTGRAPHIC_CTRL_PAN_DISPLAY and RTGRAPHIC_CTRL_WAIT_VSYNC control command.
2. Add calibration data of 480x272 ADC touching.
3. Add 480x272 LCD panel menu option and driver.
4. Update lv_conf.h.
Wayne Lin
yangjie11
Meco Man
cyyang
Wayne
wdfk-prog
Freey0
Fan Yang
Forest-Rain
LiuKang
guozhanxin
LeeChunHei
liukangcc