* bsp: cvitek: kconfig: add wdt for cv18xx_riscv
Add Watchdog timer in Kconfig.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* drv: cvitek: remove using macro from source file
Building of source file should be controlled by SConscript,
but not in source file itself.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp: cvitek: kconfig: add i2c for cv18xx_riscv
Add I2C in Kconfig for c906B.
Note, the IRQ# is different from that of c906L.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp: cvitek: kconfig: add rtc for cv18xx_riscv
Add RTC in Kconfig for c906B.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp: cvitek: fix channel issue for pwm driver
The original code confuses the concepts of controllers and channels.
Fixed it and do some code cleanup.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp:cvitek: add i2c pinmux config for cv18xx_riscv
Pinmux in driver code is controlled by SOC type, bcos driver
code should be general and support all pins defined by SoC.
Pinmux configuration in Kconfig is controlled by BOARD type,
bcos when we operate on board, it does not expose all chip-level
pin signals and we can only use part of them.
Following is I2C signals exported by duo family. Details see
https://milkv.io/docs/duo/overview.
Note: we have not added support for duo-S.
Duo
===
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL
GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo 256m
========
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL
GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo S
=====
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL
J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL
J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA
J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL
J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL
J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA
J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA
J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL
J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL
J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA
J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: flyingcys <flyingcys@163.com>
* bsp:cvitek: remove using macro from source file for i2c
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp:cvitek: unify menu message text for i2c as other drivers
Other dirvers has no extra word "HW".
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp:cvitek: add i2c pinmux config for c906_little
Porting what we have done in commit "bsp:cvitek: add i2c pinmux config
for cv18xx_riscv" to c906_little.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---------
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: flyingcys <flyingcys@163.com>
Co-authored-by: flyingcys <flyingcys@163.com>
为什么提交这份PR (why to submit this PR)
ps：在设备初始化阶段不应该存在对硬件的操作
你的解决方案是什么 (what is your solution)
ps：添加一个pin_init函数，在spi设备使用时调用该函数来完成硬件引脚的状态初始化，而不是在设备初始化阶段对硬件进行操作，已经在瑞萨HMI上通过验证
* [bsp][nxp] add missing drv_spi.h
Otherwise when building spi users such as u8g2, gcc will complain can't
find the drv_spi.h.
* [bsp][nxp] enable spi6
* [bsp][nxp] add spi sample code which uses spi6 to loopback
Connect spi6's MISO <--> MSIO, I.E P3_20 and P3_22 with Dupont Line
The sample usage and output would be:
msh >spi_sample
spi rbuf : 0 1 2 3 4 5 6 7 8 9 a b c d e f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
spi loopback mode test over!
LZerro
flyingcys
Chen Wang
蒙蒙plus
JamieTx
sheltonyu
xiao-mang
Rbb666
sp-cai
WaterFishJ
liYangYang
Rbb666
QTbin
Meco Man
SCZeiDan
IceBear003
Junjie Wang
Fan Yang
sheltonyu
LZerro
chengy2
wdfk-prog
latercomer
Siwei Xu
Shell
xiao-mang
Abner
zhangyan
Yaochenger
Yuqiang Wang
QTbin
Abner
yandld
yuanzihao
wirano
Shicheng Chu
StackYuan
xhackerustc