Skip configure on open since all configs are copied from the current
configuration on device. So we don't bother to set it back to device
again.
Changes:
- test and skip configuration on open() of tty device
Signed-off-by: Shell <smokewood@qq.com>
[ktime] feat: remove recursion on hrtimer
Replace recursive algorithm with a loop in hrtimer
when determining next timeout event and setup hr timer.
Signed-off-by: Shell <smokewood@qq.com>
* support period time
* enable multiple ktimer
* mv set delay_cnt to hrtimer_start
* add ktime debug info
* change current_irq_begin to local var
* fix bug: setting current timer and setting timeout in driver aren't atomicly
* create->init
* refactoring ktime
* [DM/feature] Implement PIC irq state { get; set }
There are some common state for irq:
1. Pending: IRQ was triggered, but software not ACK.
2. Active: IRQ was ACK, but not EOI.
3. Masked: IRQ was masked or umasked.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [DM/pic] Support IRQ state { get; set } for ARM GICv2/v3
Signed-off-by: GuEe-GUI <2991707448@qq.com>
---------
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [Feature] Power domain for device
1.Support device power on/off.
2.Support attach/detach device.
3.Support power domain driver api.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [DM/platform] Enhanced platform bus
1.Add power domain for device.
2.Support `remove` and `shutdown` bus interface.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
---------
Signed-off-by: GuEe-GUI <2991707448@qq.com>
[OFW] io ranges use ptr array to storage without ofw data
ofw data is private data for every ofw node that
the drivers of ofw node will use item.
replace the ranges supported to a ptr array.
the ptr array size is config by `RT_USING_OFW_BUS_RANGES_NUMBER`
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [PIC] Make affinity helper interface
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [PIC/GIC] Fixup GIC affinity init
GICv2 is not support if current CPU is not startup,
but RT-Thread SMP is startup after the devices init
in the `main` thread.
This patch fixup the cpumask to init once and check
the init status in affinity interface.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
---------
Signed-off-by: GuEe-GUI <2991707448@qq.com>
The OFW map id is always use in DMA, PCI, IOMMU
bus system to find the device identity. this is
a access interface.
Signed-off-by: GuEe-GUI <2991707448@qq.com>
DFS mount auto by kernel parameters
1.Mount the rootfs options by parameters:
- root=: root device, like vda1, sda1, sd0p1, nvme0n0p1...
- rootfstype=: root file system type, like elm, ext, crom...
- rw/ro: root is readonly or all enable, if not have 'rw' flag,
the 'ro' flag is default.
- rootwait: always wait for root device status is OK.
- rootdelay=: mount rootfs delay amount of time (millisecond).
2.Mount the other fs options by `fstab.sh`, it will read the script
after root mount is OK, it's format is a list of mount cmds in MSH:
mount vda2 /mnt elm
mount 192.168.1.1:/ /mnt/remote nfs
Signed-off-by: GuEe-GUI <2991707448@qq.com>
* [ipc] lockless rt_completion implementation
The new rt_completion implemented by lockless algorithm can improve timer resolution for up to ~12%, compare to sem IPC.
Signed-off-by: Shell <smokewood@qq.com>
* fixup: error
* remove useless changes
---------
Signed-off-by: Shell <smokewood@qq.com>
为什么提交这份PR (why to submit this PR)
ps：在设备初始化阶段不应该存在对硬件的操作
你的解决方案是什么 (what is your solution)
ps：添加一个pin_init函数，在spi设备使用时调用该函数来完成硬件引脚的状态初始化，而不是在设备初始化阶段对硬件进行操作，已经在瑞萨HMI上通过验证
In this patch, a hook list has been introduced to address the concerns
regarding coupling issues arising from modifications to the serial code
for integrating TTY logic.
Signed-off-by: Shell <smokewood@qq.com>
为什么提交这份PR (why to submit this PR)
serial_v2驱动框架，rt_serial_tx_enable()函数，在 DMA阻塞发送(RT_DEVICE_FLAG_DMA_TX and RT_SERIAL_TX_BLOCKING) 的时候，使用rt_malloc分配了tx_fifo内存，但是并未对tx_fifo->rb.buffer_ptr指针进行初始化（rt_malloc不会自动初始化内存），因此可能导致buffer_ptr是一个随机指针。但是rt_serail_write()函数需要根据tx_fifo->rb.buffer_ptr是否为RT_NULL来判断是调用_serial_fifo_tx_blocking_nbuf()还是_serial_fifo_tx_blocking_buf()。
由于tx_fifo->rb.buffer_ptr可能是一个随机值（不一定为RT_NULL=0），导致RT_DEVICE_FLAG_DMA_TX and RT_SERIAL_TX_BLOCKING模式下调用了_serial_fifo_tx_blocking_buf()，但是rb没有真正开辟内存空间，导致内存异常
你的解决方案是什么 (what is your solution)
rt_serial_tx_enable()，在DMA阻塞发送分支下，对tx_fifo->rb.buffer_ptr进行初始化，赋值为RT_NULL。
wdfk-prog
Shell
LaterComer
Evlers
zhao maosheng
sakumisu
Rui
yiyi
zms123456
zhujiale
sp-cai
yangpeng
GUI
Jiading Xu
winfenggao
Fan YANG
liYangYang
geniusgogo
LZerro
xiao-mang
Yuqiang Wang
Meco Man
kk
Liu Yang
StackYuan
fangjianzhou
1ridic