68ca9f07a6
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 ( #6740 )
...
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
2022-12-16 18:38:28 +08:00
4246275e6e
add "\n" to cat
2022-12-15 11:34:00 -05:00
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
bdd663a33f
[libc][musl] support arm-linux-musleabi toolchain
...
目前基本功能已经可以在QEMU上跑起来，但是pthread和内核signal选中会报冲突。先合并一版本，后续解决这些问题。
2022-11-22 21:40:50 -05:00
84eab69604
[msh] remove list_xxx commands, use 'list' to replace
2022-11-21 21:39:45 -05:00
5370d4da50
replace `rt_enter_critical` with `dfs_lock` for list_fd
...
I found that if use mutex in `rt_kprintf`,
the `rt_enter_critical` will create a assert
error later. after chehcking,I found all
operation with fd_table has using
`dfs_lock/unlock` to protect. so I think
using `dfs_lock` is enough. thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
2022-11-09 22:41:15 -05:00
74fd07a565
lseek()函数中，当seek到文件的位置和当前位置相同时，不需要调用dfs_file_lseek()函数，直接返回当前位置即可。 ( #6498 )
...
当seek到文件的位置和当前位置相同时，不需要调用dfs_file_lseek()函数，直接返回当前位置即可。
同时，以lseek(fd,0,SEEK_CUR)的方式执行函数可以返回文件当前读去位置，可以实现
ftell()的功能.
以lseek(fd,0,SEEK_CUR)的方式执行函数返回文件当前位置，实现ftell()的功能时不用调用dfs_file_lseek()函数，提高效率；seek(fd,0,SEEK_CUR)本来就能返回当前位置。
2022-10-10 17:48:02 -04:00
dongly
3363586cbb
Fix some compilation warning ( #5744 )
...
* Fix some compilation warning
* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-02 12:09:49 -04:00
961fe7de0b
list_fd 显示完整路径 ( #5683 )
2022-03-26 15:45:53 +08:00
add72f1d7c
[dfs][posix] add creat()
2022-01-20 20:50:24 +08:00
f89a162ea3
[core] 使用rt_memcpy rt_memset代替memcpy memset
2022-01-09 00:23:18 +08:00
918ee6147c
add RT_USING_POSIX_STDIO
2022-01-05 23:11:58 +08:00
a3284876ff
revise RT_USING_POSIX_STDIO to RT_USING_POSIX_DEVIO
2021-11-24 08:41:10 -05:00
64023c38f7
Merge pull request #5283 from mysterywolf/dfs
...
[dfs] move dfs back
2021-11-24 17:37:03 +08:00
df9a23c534
[mutex] use RT_IPC_FLAG_PRIO to replace RT_IPC_FLAG_FIFO
2021-11-17 15:57:15 -05:00
973f25901c
[dfs] move dfs back
2021-11-16 00:57:56 -05:00
f8388c572e
add RT_USING_POSIX_STDIO
2021-11-07 23:41:16 -05:00
25bd908fb7
[libc][posix] 解决RT_LIBC_USING_FILEIO范围过大的问题
2021-10-27 03:04:05 -04:00
a9910a780e
[posix][libc] 优化libc中posix结构
2021-10-26 23:09:54 -04:00
f7548b934e
[posix][dfs] move dfs_posix dfs_poll dfs_select.c to posix folder
2021-10-21 19:05:53 -04:00
8c01acc667
Revert "[libc]&[dfs] remove unnecessary RT_USING_POSIX and RT_USING_DFS_DEVFS"
2021-10-14 20:11:01 -04:00
a354f846e8
[libc]&[dfs] remove unnecessary RT_USING_POSIX and RT_USING_DFS_DEVFS
2021-10-13 15:21:41 -04:00
08e5e9d25f
[bsp][simulator] Fix compilation errors
2021-10-11 20:09:47 +08:00
ee4b7916a3
[libc标准化]脱敏dfs_select.h 由标准sys/select.h代替
2021-09-22 16:45:21 -04:00
e91ffdd1a0
[libc] fix the conflict warning of read and write functions
2021-09-13 11:39:04 -04:00
160d448660
Merge pull request #5051 from mysterywolf/be_libc
...
[libc标准化] 使用标准poll.h代替dfs_poll.h
2021-09-13 10:45:09 +08:00
c48445a5f7
[标准化libc] fix CI warning
2021-09-11 18:33:46 -04:00
c360688714
使用poll.h代替dfs_poll.h
2021-09-11 11:56:54 -04:00
92c62a8fab
标准化<poll.h> 弱化<dfs_poll.h>
2021-09-11 11:25:43 -04:00
8102502b98
[devfs] F_GETFL/F_SETFL should be handled by the drivers.
2021-07-08 16:38:40 +08:00
b7bfa04c06
[dfs] cat命令执行后增加\n 与linux行为一致
2021-03-21 02:03:45 +08:00
3c05a4e719
[compoenets] auto & manual formatted
2021-03-08 18:19:04 +08:00
8861202c3b
[dfs] fix the DEVICE could not get or set flags
2020-09-26 12:30:39 +08:00
50dc41468e
[add] DFS file system supports device types
2020-09-26 09:55:58 +08:00
ad3e6d8898
[DFS] clean the unnecessary checking
2020-08-07 08:51:22 +08:00
d75f03e4b0
1、解决do_pollfd函数中处理底层网络设备返回错误-1的情况，返回-1时select函数也要返回-1 …
...
2、网卡设备调用关闭dhcp时，底层要调用dhcp_stop函数来关闭dhcp功能，打开时再调用dhcp_start，否则再次打开dhcp时无法获取ip地址或者出现在使用静态ip地址会在dhcp租约到期时自动再获取ip地址。
3、sal_socket.c程序中的sal_accept函数增加判断网卡up,down的功能
4、修改注释信息
2020-05-21 22:05:38 +08:00
63950c9259
1、解决do_pollfd函数中处理底层网络设备返回错误-1的情况，返回-1时select函数也要返回-1
...
2、网卡设备调用关闭dhcp时，底层要调用dhcp_stop函数来关闭dhcp功能，打开时再调用dhcp_start，否则再次打开dhcp时无法获取ip地址或者出现在使用静态ip地址会在dhcp租约到期时自动再获取ip地址。
3、sal_socket.c程序中的sal_accept函数增加判断网卡up,down的功能
2020-05-17 15:51:35 +08:00
1c68bd9d3c
Support msc mode automatic switching
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
78d42efd22
[DFS] cleanup the log in dfs.
2019-12-18 21:37:42 +08:00
aafed7b434
1.修复sd卡热插拔内存泄露的bug
...
2.dfs增加函数，配合实现sd卡热插拔自动挂载卸载文件系统
2019-11-16 11:16:48 +08:00
60f2ae4d3c
[components][dfs]添加ftruncate接口
2019-09-26 10:22:33 +08:00
97c9abffd1
[components][dfs] Fix fd error in command list_fd
2019-07-26 19:07:05 +08:00
d8eb0cfc1e
fix kernel and framework no cast type error
2019-06-18 20:09:19 +08:00
958d42f32c
[components/dfs]fix index overflow bug when not filesystem was selected
2019-04-23 23:03:34 +08:00
6c92eb40da
[DFS] Update dfs file open log.
2019-04-12 10:39:05 +08:00
25cdd8bba9
fix use printf format bug
...
fix use printf format bug
2019-04-09 20:11:07 +08:00
e71ec65549
[components][dfs]格式化代码
2019-04-08 14:51:01 +08:00
4f7c06f923
[component][DFS] Change the log level on dfs_file_open() func.
2019-03-07 15:56:39 +08:00
7383269905
[Kernel] Code cleanup for compiling warning.
2019-02-12 14:33:45 +08:00
3b4a9f51c7
[DFS] Remove opened file check
...
Remove opened file check in dfs_file_open function. It will be replaced with POSIX flock/fcntl.
2019-01-24 20:55:27 +08:00
guo
褚仕成
Man, Jianting (Meco)
a1012112796
winfenggao
dongly
Bernard Xiong
tangyuxin
longtengmcu
Cliff Chen
hichard
zhangjun
gbcwbz
tyustli
misonyo
armink
HubretXie