a65e6d1613
Nuvoton drivers updating and more LVGL supporting. ( #5647 )
2022-03-12 07:00:53 +08:00
446bde64c8
[Nuvoton] Update drivers ( #5501 )
...
* Update drivers.
1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.
* [Nuvoton] Update drivers.
1. Fix open-control order issue in CAN driver.
2. [N9H30] Improve N9H30 I2C busy-wait implementation.
3. [N9H30] Support 1024x600x32b LCD panel.
4. Move nu_packages menu into sub-menu of board.
* Update menu-option.
1. Set BOARD_USING_LCM is on by default.
2. Fix default value setting in choice-option.
* Fix control function in I2C driver.
* Add sdk_dist.py and ADC touching calibration function.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-01-16 18:43:27 +08:00
7566c1a24c
Update drivers.
...
1. Improve LVGL avg FPS.
2. Sync configuration to 4.1.0.
2022-01-06 11:41:55 +08:00
5031a5c757
Large reserved partition size.
...
To avoid to overwrite larger firmware size with LVGL.
2021-12-30 01:39:17 +08:00
c07b2b0a07
[Nuvoton] Update drivers.
...
1. ARM9 EHCI timeout issue.
2. Sync mainstream.
2021-11-15 11:23:26 +08:00
6ec6285e1b
[nuvoton] Update BSP.
...
1. Add NUC980 Chili board supporting.
2. Correct NuMicro.h including.
3. Implement rt_hw_us_delay system call function.
4. Move board.c to drv_common.c for M480 and M2354 series.
2021-03-15 15:41:41 +08:00
dfbeb9e88c
Sync Nuvoton porting.
...
1. NUC980 platform: USBH, INPUTCAPTURE, SPINAND.
2. Correct enter-quad-mode routine in board_dec.c.
3. Use RT_ASSERT to catch system-call-exceptions.
2021-02-01 10:35:44 +08:00
1c4328e5a9
Update NUC980 and M480
...
1. Add 980 drv_usbd.
2. EMAC - move MDC CLK divider before EMAC initialization.
3. Correct NUC980 and M480 CAN RX_MSG_ID_INDEX definition.
4. add USBD cdc demo - vcom_echo.
5. mnt - add mount_table definition.
2020-12-29 19:35:43 +08:00
0cfe292157
Update nuvoton RTT porting.
...
1. Fix porting driver.
2. Add NAU8822 audio codec driver.
3. Add NUC980 I2S porting driver.
2020-12-25 18:39:12 +08:00
8d90cfadf0
Update nuvoton porting.
...
1. Make up sources and bugfix.
2. Add nu_gpio_pin_get.
3. Add PM operator in USB host driver.
4. Support NUC980 stage 1 and add nk-980iot board.
2020-12-21 14:57:09 +08:00
Wayne
Wayne Lin