When compiling CV18xx_arch64, have a error:
can not find "rt_fdt_commit_memregion_early"
Analysis: b785ef9 ("[libcpu][aarch64]memory setup using memblock ")
no longer support "rt_fdt_commit_memregion_early", become use
"rt_memblock_reserve_memory"
Solution: Refer to the bsp/qemu-virt64-aarch64/drivers/board.c
delete "rt_fdt_commit_memregion_early"
Signed-off-by: Shicheng Chu <1468559561@qq.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
When compiling CV18xx_arch64, there are the following errors:
1. missing soc type for aarch64
2. uart device objects defined but not used
Analysis: a63c07f ("bsp: cvitek: new design for pinmux") and
114e143("bsp:cvitek: add pinmux for uart"), CV18xx_arch64 is not
considered.
Solution: Refer to the cv18xx_riscv format to add the corresponding
chip type SOC_Type_SG2002, as well as the corresponding macro
for the serial port pins and interrupts
Signed-off-by: Shicheng Chu <1468559561@qq.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
The rtdef.h is a big header with multiple dependency inside,
which makes it easier to introduce recursion dependency.
Signed-off-by: Shell <smokewood@qq.com>
Currently, the documents under bsp/cvitek are a bit
messy. There are currently four readme files:
- bsp/cvitek/README.md (Chinese)
- bsp/cvitek/c906_little/README.md (Chinese/English)
- bsp/cvitek/cv18xx_aarch64/README.md (Chinese)
- bsp/cvitek/cv18xx_risc-v/README.md (Chinese/English)
Regarding the working mode of the big + small cores, it
is meaningless to describe the small core alone, or the
large core alone. This can also be seen in the existing
files. The readme of the small core will also introduce
the programming of the large core, and vice versa.
Considering that the official default mode is
C906B + C906L. ARM large core can be treataed as a
special case. So the document structure is modified as
follows:
- Remove `bsp/cvitek/c906_little/README.md` and
`bsp/cvitek/cv18xx_risc-v/README.md`, merge them all
into `bsp/cvitek/README.md`
- Add a link to `bsp/cvitek/cv18xx_aarch64/README.md`
in `bsp/cvitek/README.md`
FIXME: The modified document does not provide English
version. Is it really necessary?
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
This is required so the user will not be confused on waiting for test to complete.
Changes:
- notify user that the test is not corrupted
- expand waiting tick on timed mtx test, for compatibility on different hw.
Signed-off-by: Shell <smokewood@qq.com>
Some drivers use INIT_BOARD_EXPORT, it is not necessary,
it is enough to use INIT_DEVICE_EXPORT for genearl drivers.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
This patch focuses on the ARM64 general context handling code.
The modifications are aimed at enhancing performance by simplifying
context save/restore operations.
Changes include:
- Adjusted stack alignment in `arch_set_thread_context` function.
- Updated `lwp_gcc.S` to reset frame pointer and link register.
- Refined `rt_hw_backtrace_frame_unwind` to handle user space address checks.
- Added `GET_THREAD_SELF` macro in `asm-generic.h`.
- Simplified context saving/restoring in `context_gcc.h` and related files.
- Optimized `rt_hw_context_switch_interrupt` and related assembly routines.
Signed-off-by: Shell <smokewood@qq.com>
See `components/drivers/include/drivers/watchdog.h`
maco definition of
RT_DEVICE_CTRL_WDT_GET_TIMEOUT
RT_DEVICE_CTRL_WDT_SET_TIMEOUT
RT_DEVICE_CTRL_WDT_GET_TIMELEFT
The wdt timeout time unit is defined as seconds in the API, but
the code incorrectly uses ms.
Correct this and comply with the API definition.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
This patch improves the efficiency and readability of the AArch64 common setup
code by calculating the `PV_OFFSET` once at the start and reusing the value.
This change reduces redundant calculations.
Signed-off-by: Shell <smokewood@qq.com>
Rewrote the spi driver.
Reuse the driver code from https://github.com/sophgo/cvi_alios_open,
which is Apache 2.0 licenced.
Signed-off-by: flyingcys <flyingcys@163.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
```
./bsp/cvitek/drivers/drv_wdt.c: In function '_wdt_control':
warning: assignment to 'void *' from 'unsigned int' makes pointer
from integer without a cast [-Wint-conversion]
119 | wdt_device->parent.user_data = (rt_uint32_t)(*(rt_uint32_t *)arg);
| ^
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
122 | *(rt_uint32_t *)arg = (rt_uint32_t)wdt_device->parent.user_data;
| ^
```
Rootcasue: It's not portable to store integar in a pointer.
Solution: use global _wdt_dev to store the timeout value.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Do unmap before shrink so we don't see mapped entry on page table
insertion, which is not acceptable for riscv implementation of
architecture porting.
Changes:
- add un-mapping of pte on `_null_shrink()`
Signed-off-by: Shell <smokewood@qq.com>
[dfs] feat: Mark dirty on unmap for shared mapping
This patch optimizes the pcache varea management by refining the
conditions under which pages are marked dirty, specifically targeting
the unmap operations in the dfs_pcache component. These changes were
necessary to enhance the efficiency of page cache management.
Changes:
- Adjusted include statements in `dfs_pcache.c` for better organization.
- Modified `dfs_aspace_unmap` function:
- Added a check to ensure `varea` is not privately locked before marking a page as dirty.
- Updated `dfs_aspace_page_unmap` function:
- Added a similar check for `varea` lock status before marking a page as dirty.
Signed-off-by: Shell <smokewood@qq.com>
The ADC controller needs to be calibrated during the initialization
phase, otherwise the measured voltage value will be inaccurate.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
In the new design, we require the user to manually enter the
PinName (as a string) in menuconfig instead of being given
menu items to select.
The original method will lead to too many menu item-related
macros being defined in the code, causing ifdef and other
codes scatter everywhere in the driver code, which is
inconvenient to maintain.
The new design adds a pinmux driver module to manage the
multiplexing of pins. This patch provides this driver module.
P.S., the reason why users are allowed to specify pinname
in a string instead of the pin number is mainly because
the technical manual provided by the SOC manufacturer
does not have numbers for some pins, only names.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
Z8MAN8
Bernard Xiong
heyuanjie87
Shell
Jiading Xu
Chen Wang
zhangyan
张衍
Rbb666
Supper Thomas
wdfk-prog
MuChenger
zhao maosheng
flyingcys
zhuzhuzhu
zms123456