60199160cf
[bsp][lpc55sxx] add: README_zh and README
2023-02-05 22:03:27 -05:00
98e0c58527
Add ADT Kconfig and fix MMU kconfig issue in Cortex-A ( #6901 )
...
* Add ADT Kconfig and fix MMU kconfig issue in Cortex-A
* [BSP] enable ADT
2023-02-06 01:11:04 +08:00
db5ed9c576
[IFX]Add psoc6 bsp
2023-02-03 13:56:30 +08:00
83bd8614ab
Bsp lpc55sxx ( #6897 )
...
* [bsp_lpc55sxx] i2c,rtc bsp update
1. add i2c DMA mode
2. enable rtc driver
* [bsp_lpc55sxx] formmat code
using formmating.py for format code
* [lpc55sxx] remove .gitignore
* [bsp][lpc55sxx] update bsp driver
1. update sdif driver, enable DFS, FAT32
2. update rtc driver
2023-02-02 16:41:14 +08:00
6d00b28425
[bsp/raspberry-pico] add: SMP ( #6888 )
2023-02-02 12:19:33 +08:00
a9b9bf0e7f
[IFX]Add two board README.md
2023-02-01 18:18:43 +08:00
ca26a85652
[IFX]Add capsense support
2023-01-31 23:58:16 -05:00
a59a8d9302
fixed format error, add auto compile check
2023-02-01 11:30:56 +08:00
c8106bc19b
add support f421/f425
2023-02-01 11:30:56 +08:00
ae78aedfac
[Renesas]Fix ra6m3 build error
2023-02-01 10:32:55 +08:00
c9c43c8c5b
[bsp_lpc55sxx] i2c,rtc bsp update ( #6885 )
...
* [bsp_lpc55sxx] i2c,rtc bsp update
2023-01-30 21:21:52 -05:00
5f4b4ae5f1
add spi twi drv for nrf5340
2023-01-29 21:30:41 -05:00
7e177ebf1a
[at32][can]修复CAN驱动返回消息时，错误给id和ide赋值问题
...
该驱动收到can消息时，给上级返回消息结构的id和ide成员赋值不正确。
Signed-off-by: 李刚 <lg28870983@163.com>
2023-01-29 08:44:07 -05:00
9b109639d1
[stm32] sconscript typo
2023-01-22 22:07:54 -05:00
a6502eea74
[IFX]Add psoc6-rtt-062S2 BSP ( #6866 )
...
* [IFX]Add psoc6-rtt-062S2 BSP
* [IFX]Update BSP name
* [IFX]Add libcy_capsense.a
2023-01-19 21:49:23 -05:00
61631c393e
[bsp/bl808] add: drv_i2c
2023-01-19 21:41:53 -05:00
65adce2989
[D1s]Add mksdcard.sh
2023-01-19 21:40:49 -05:00
6eaf9a9c57
[stm32][qspi] qspi attach 函数问题解决方案 ( #6867 )
...
* [qspi] qspi attach 函数解决方案
* pin
* 更改函数名字
2023-01-18 22:04:45 -05:00
63294afc9d
[stm32][softspi]soft spi attach函数问题解决方案 ( #6868 )
...
* [softspi]soft spi attach函数问题解决方案
* 更改函数名
2023-01-18 22:03:48 -05:00
7ff64c1cfd
[stm32][spi] spi attach函数问题解决方案 ( #6864 )
...
attach #6819
2023-01-18 00:27:08 -05:00
65f1804005
[bsp/stm32wle5-yizhilian-lm402]修复scons --dist缺失大量文件
2023-01-17 21:32:43 -05:00
265dbc0ce1
[bsp/stm32wle5-yizhilian-lm401]修复scons --dist缺失大量文件
2023-01-17 21:32:43 -05:00
9a6dab644a
Add psoc6-cy8cproto-062S3-4343W BSP and update doc
2023-01-16 23:37:22 -05:00
c9f7f0e771
[BSP][stm32] fix the compile error
2023-01-16 23:21:21 -05:00
a2647aa3e2
[bsp/bl808] update: READme
2023-01-16 21:34:23 -05:00
25c567e330
[IFX]Remove Kconfig—>Board extended module Drivers
2023-01-16 21:34:03 -05:00
84af32db34
[bsp/bl808] add: drv_gpio ( #6856 )
...
* [bsp/bl808] add: drv_gpio
2023-01-15 23:41:09 -05:00
1632ad083a
[IFX]Remove HAL_Drivers/config folder
2023-01-15 21:36:49 -05:00
2da43febbd
add some apm32 bsp and fix apm32f0/apm32f1 gcc startup assembly file bug and fix apm32 drv_eth.c bug ( #6855 )
...
* add some apm32 bsp and fix apm32f0/apm32f4 gcc startup assembly file bug and fix drv_eth.c bug
* fix apm32f103xe-minibroard and apm32f407ig-minibroard link.lds file error
* replace apm32f051r8-evalboard picture
* fix apm32f1 gcc assembly startup file suffix name
* renamed startup_apm32f10x_md.s/startup_apm32f10x_hd.s file and modify apm32f103xe-minibroard/board SConscript file
2023-01-15 21:16:02 -05:00
f0dadcb3c3
[rt-smart] porting c906 and D1s to mm ( #6848 )
...
* [rv64/bsp] porting to mm
* [mm] report more info for debugging
* [fix] code format
* [libcpu/c906] porting to RTOS
* [fix] using rtdbg api
* [fix] add return
* [fix] report more information for debugging
* [fix] use assert 0 for unrecoverable error
2023-01-16 08:24:03 +08:00
fec7404506
[bsp] wch ch32v307v-r1动态初始化堆内存 ( #6849 )
...
#### 为什么提交这份PR (why to submit this PR)
- 修复ch32v307v-r1 board.h 中变量_stack_size未声明BUG
- 提供ch32v307v-r1动态堆内存分配（宏开关）代码
- ch32v307v-r1 MD文档新增烧录方式，作为烧录后无运行结果的替代方案
#### 你的解决方案是什么 (what is your solution)
- 去掉_stack_size未声明变量
- 动态分配内存堆，将堆起始地址放在.bss段结尾，堆结束地址放在.stack段开头[详情](https://club.rt-thread.org/ask/article/001065082e9ae611.html )
- 将烧录工具替换为WCH-LinkUtility
#### 在什么测试环境下测试通过 (what is the test environment)
- 开发工具: RT-Thread Studio
- 测试板卡：ch32v307v-r1评估板
- 烧录工具：WCH-LinkUtility
2023-01-13 20:50:33 -05:00
ddccef3a64
modify RT_ALIGN_SIZE as 8 by default
2023-01-12 22:47:23 -05:00
f4fa7ba970
[RTduino][stm32f469-disco][readme] fix typo
2023-01-13 11:40:57 +08:00
09b36e76f2
[RTduino][stm32f411-nucleo] add English readme
2023-01-13 11:40:57 +08:00
baac8760a5
[RTduino][stm32f410-nucleo] add English readme
2023-01-13 11:40:57 +08:00
120595d371
[RTduino][readme] correct grammar
2023-01-13 11:40:57 +08:00
b0c4aca6e5
[ch32v208] 调整Kconfig
2023-01-13 11:40:57 +08:00
ce3f60b22b
[RTduino][ch32v307] add English readme
2023-01-13 11:40:57 +08:00
7b35c8d353
Add Infineon Doc and modify file structure
2023-01-12 17:23:30 +08:00
b310541471
[env] add scons --strict
...
此commit意图在脚本中增加 scons --strict命令，使用该命令编译工程时，会自动将CFLAGS CXXFLAGS设置为 Werrors，即较为严格的编译模式，任何警告都会当做错误来处理。
该命令主要用于CI，在CI执行bsp编译时，可以使用 scons --strict命令。现在QEMU的rtconfig.py 为了CI检查，直接将CFLAGS加上了Werrors，导致正常编译过程中也把警告当做了错误，对日常使用该bsp造成了影响。
2023-01-12 01:43:44 -05:00
fcf2367966
[bsp] update ch32v307 readme
2023-01-12 14:00:27 +08:00
076683f6e3
fix the syntax error of drv_spi.c in lpc55sxx.
2023-01-11 17:53:33 -05:00
bf8db63c78
Fix building issue of Nuvoton porting. ( #6833 )
...
* Fix building issue of Nuvoton porting.
1. Change thread priority of lwip-tcpip and erx.
2. Remove '')' garbage symbols.
3. mm driver issues.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2023-01-11 16:26:56 +08:00
168e12501d
Add RA6M3 Studio Support ( #6835 )
2023-01-11 16:22:17 +08:00
071d52ad44
[RTduino][stm32f410-nucleo] 添加readme，在pins_arduino.c和pins_arduino.h添加了USER_KEY引脚编号 ( #6838 )
...
* 添加readme
* 更改pins_arduino.h引脚编号
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2023-01-10 21:41:58 -05:00
1480f7296c
format file && update README.md
2023-01-09 22:15:30 -05:00
9339e495f0
[RTduino] 增加CH32V307 readme
2023-01-09 21:41:59 -05:00
92531dec87
Update Infineon documents and introduce
2023-01-10 09:35:34 +08:00
7ecba50ff6
format stm32 drivers
2023-01-08 22:52:13 -05:00
592284c66c
format link scripts
2023-01-08 22:52:13 -05:00
9bc68d26a4
format Kconfig and sconscript
2023-01-08 22:52:13 -05:00
f4b285dc9c
improve sensor framework ( #6784 )
...
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c
* [sensor][cmd] add enter critical section protection
* [sensor] add sensor reset command
2023-01-08 21:33:38 -05:00
7450ef6c4d
[rt-smart] kernel virtual memory management layer ( #6809 )
...
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
2023-01-08 21:08:55 -05:00
7c05d8517c
[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 ( #6819 )
...
* [spi]attach 片选引脚依赖pin框架
* 修改attach函数
2023-01-07 23:03:42 -05:00
98a997c57e
[bsp]add new bsp-bl808 ( #6824 )
...
* add new bsp-bl808
* support ARCH_RISCV_FPU_S && update rtconfig.py
2023-01-07 02:03:21 -05:00
3dffc78f39
Add ra6m3 readme
2023-01-06 18:42:21 -05:00
d58e863a6d
[bsp][lpc55sxx] i2c driver fix&repair
2023-01-06 18:42:00 -05:00
5eadf36b3b
Add studio documents for Infineon ( #6821 )
...
* Add Studio doc
* Update PSOC6系列BSP制作教程.md
2023-01-06 16:41:41 +08:00
6618293dc5
[bsp][ch32]pwm避免警告 ( #6818 )
2023-01-05 23:10:46 -05:00
e498687a58
[BSP] Add n32g4frml-stb bsp ( #6773 )
...
新增n32g4frml-stb bsp，在n32g4frml-stb 开发板上测试通过。
Add n32g4frml-stb bsp. passed the test on the n32g4frml-stb board.
2023-01-05 01:45:17 -05:00
24575c4486
add apm32F0 serie MCU support ( #6789 )
...
* add apm32F0 serie MCU support
add apm32f072vb-miniboard bsp
update F103/F407 bsp
* replace apm32f072vb picture
* Update action.yml
2023-01-05 01:15:02 -05:00
b99769f686
[libcpu][riscv]移除ch32中的冗余文件,使用common下的文件 ( #6813 )
...
* [libcpu][riscv]移除ch32中的冗余文件,使用common下的文件
* 修正cpuport.h宏定义
* 规范宏定义格式
2023-01-04 21:06:09 -05:00
f2a66e122f
[libcpu][riscv]移除cv32e40p中部分文件，采用common中的文件
2023-01-02 16:42:18 -05:00
431579a166
[stm32][adc]更改配置通道与校准函数顺序 ( #6758 )
...
* [stm32][adc]更改配置通道与校准函数顺序
* 添加16位与14位分辨率配置
* 添加内部参考电压与温度,电池电压通道配置
* [stm32][adc]修改返回参考电压函数
* 返回准确的参考电压值
* 通过该值在使用__HAL_ADC_CALC_DATA_TO_VOLTAGE宏计算的电压值更为准确
* 删除多余代码
* 规划代码格式
* 更新支持其余芯片
* 已测试F429
2023-01-02 01:47:58 -05:00
c38c6e2c83
[rtduino]:add README for stm32f411-weact-blackpill pinout ( #6807 )
...
* [rtduino]:add README for stm32f411-weact-blackpill pinout
2023-01-01 23:39:40 -05:00
2b41f80f0e
[rtduino]: fix README
2023-01-01 23:00:52 -05:00
d355981041
[bsp][stm32f407-RoboMaster-C]Enable TIM5_CH1/2/3
2022-12-31 16:30:16 -05:00
7788227887
[bsp][lpc55sxx] update IDE project file
...
1. update all LPC55sxx ide project file
2022-12-30 07:52:46 -05:00
de9db80814
[rtduino] : fix arduino_pinout and README
2022-12-30 07:51:49 -05:00
76b5d0dfcf
[bsp][nuvoton] modify RT_WEAK as rt_weak
2022-12-29 20:23:12 -05:00
5e40f3a0d4
修复BUG(simulator)：修复bsp/simulator编译报错的BUG
2022-12-29 14:02:08 -05:00
8a71ae75ad
[BSP][smart] fix link script for smart in vexpress-a9 ( #6764 )
2022-12-29 15:18:36 +08:00
0d1c709fa5
Sync upstream ( #6793 )
...
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-12-29 15:15:13 +08:00
882a0af94e
[libcpu][riscv] 添加宏用于区别是否开启FPU，更新ch32v208v-r0 ->ch32v208w-r0，更新注释
2022-12-28 18:47:39 -05:00
525417085b
[bsp] add air32f103 ( #6785 )
2022-12-27 19:44:20 -05:00
b77241935c
[bsp][ch32v208]添加ch32v208BSP,合并libcpu/riscv 中ch系列的port文件 ( #6780 )
...
【1】添加ch32v208-r0 bsp
【2】合并libcpu/riscv 下ch系列mcu的port文件
2022-12-27 13:24:02 -05:00
59f10fd704
[bsp][ch32v307]适配RT-duino框架 ( #6669 )
...
为ch32v307适配rt-duino，支持pwm、gpio、uart、iic，暂不支持 spi。
已在ch32v307评估板测试。
测试内容包括串口打印、呼吸灯、AHT10温湿度读取等。
2022-12-27 02:45:20 -05:00
20a6f14e89
use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE
2022-12-26 02:10:30 -05:00
40a24806f9
[stm32][pandora] add ap3216c sensor support
2022-12-26 02:10:30 -05:00
401ad16449
[bsp][smart] fix virt64 aarch64 link script for smart.
2022-12-26 14:24:26 +08:00
fa7c1db768
[stm32][spic]修改SPI TX DMA中断优先级
...
* 原先中断优先级不生效
2022-12-24 15:12:30 -05:00
db6ee55379
[STM32][common]更新rt_hw_us_delay函数,以支持设置更高延时
...
* 未判断设置延时数是否会溢出
2022-12-22 21:18:29 -05:00
262392a69c
[sensor] draft new sensor-hal framework ( #6746 )
...
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
2022-12-21 21:24:51 -05:00
f4323f2049
[stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 ( #6765 )
...
并确认并列出已经在什么情况或板卡上进行了测试。
And confirm in which case or board has been tested. -->
STM32F103ZET6
为什么提交这份PR (why to submit this PR)
使用STM32F103ZET6的RTC的Alarm功能出现问题，按照原本的驱动代码编译会报错。
你的解决方案是什么 (what is your solution)
修改底层驱动drv_rtc.c文件，将报错的几个结构体给注释掉即可。
在什么测试环境下测试通过 (what is the test environment)
rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能
2022-12-21 20:33:54 -05:00
eec9d4f595
[arduino][stm32f427-robomaster-a] : 对接RTduino ( #6767 )
...
* [arduino][stm32f427-robomaster-a] : 对接RTduino
* Update README.md
* Update pins_arduino.c
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-12-21 18:16:31 -05:00
91cdcea900
[bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340 ( #6754 )
...
* add nrf5340 bsp,add uarte and gpio drv for 5340
* [bsp][nrf5340]add 5340 define for 1000000 baud rate;change RTC driver for 5340
Co-authored-by: andrew li <andrew.li@nordicsemi.no>
2022-12-20 20:11:27 -05:00
e8504c7cf1
[smart/aarch64] code sync ( #6750 )
...
* [smart/aarch64] sync aarch64
2022-12-20 17:49:37 +08:00
f0ef8ada33
[bsp] [stm32F401] Enable PA11 for TIM1_CH4 ( #6756 )
2022-12-20 01:20:20 -05:00
ba2d7ba4c0
[arduino][stm32f407-robomaster-c] 对接RTduino ( #6759 )
2022-12-20 00:59:54 -05:00
8ade08799b
[bsp][core-v-mcu]在驱动中添加rtconfig.h，以兼容原工程基于FreeRTOS的驱动
2022-12-19 18:25:04 -05:00
b256411736
更新readme
2022-12-18 23:37:54 -05:00
68ca9f07a6
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 ( #6740 )
...
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
2022-12-16 18:38:28 +08:00
3ea5166376
[bsp][core-v-mcu]修改后兼容原有CLI,兼容原有FreeRTOS函数接口 ( #6747 )
...
* [bsp][core-v-mcu]兼容原有FreeRTOS函数接口，兼容CLI
2022-12-16 17:56:13 +08:00
0a6ffce446
[STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数 ( #6745 )
...
* [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数
* 规范代码格式
2022-12-16 02:10:42 -05:00
63e7633246
[STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动 ( #6741 )
...
* [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动
* H7下SPI时钟不再为外设总线时钟频率
* H7下DMA驱动需要进行CacheLine对齐
2022-12-15 01:05:56 -05:00
012aa0e0d0
[bsp][lpc55sxx] add support for LPC55S16 ( #6743 )
...
* [bsp][lpc55sxx] add support for LPC55S16
* [bsp][lpc55s16] formating LPC55S16 driver
2022-12-14 23:34:08 -05:00
89c3bf5f92
ESP32_C3: Improve Readme, fix compile errors/warnings
2022-12-13 11:50:29 +08:00
99bdf978d7
[rtdef] use lower-case to define attributes ( #6728 )
...
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-12-11 13:12:03 -05:00
49486f98d1
[bsp][core-v-mcu]规范代码格式 添加英文readme_EN ( #6718 )
...
Co-authored-by: 1516081466@qq.com <ws051000>
2022-12-10 14:39:26 -05:00
e991be9c51
[smart][risc-v/libcpu] port rv64 cpu code ( #6704 )
...
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
2022-12-10 22:16:42 +08:00
褚仕成
Bernard Xiong
Rbb666
杨熙
螺丝松掉的人
sheltonyu
andrew li
Meco Man
Rbb666
liYangYang
会飞的猪
Zxy
luobeihai
Shell
会飞的诸
vandoul
Wayne
lpy
flyingcys
zhaohaisheng
yandld
Yaochenger
BruceOu
Yaochenger
wdfk-prog
goldengrandpa
breederbai
打盹的消防车
hg0720
bernard
ANDREW LI-Nordic
Stanley Lwin
guo
tangzz98
Shell