Meco Man
067315ff40
[phy] fix the PHY_FULL_DUPLEX conflicts
2022-08-03 22:45:27 -04:00
Tangyuxin
f82705db1d
[touch] 调整触摸头文件至 rtdevice.h 中 ( #6180 )
2022-07-23 11:48:26 +08:00
Man, Jianting (Meco)
5b6a257c20
chore: fix a typo ( #6154 )
2022-07-10 18:00:12 +08:00
BreederBai
b2bc0dcd16
[rt_drv_pwm]增加API:增加单独设置PWM频率和脉宽的函数 ( #6130 )
...
* [rt_drv_pwm]增加API:增加单独设置PWM频率和脉宽的函数
2022-07-04 10:40:42 +08:00
Meco Man
1c95670bef
[rtdevices] eliminate recursion
2022-06-22 14:48:00 +08:00
Meco Man
4f1f8566f4
[spi] fix issue report #6008
...
rt_spi_sendrecv8()存在可能未初始化值返回的情况
2022-06-22 11:52:06 +08:00
Man, Jianting (Meco)
fb941e6d8d
[fingbuffer] fix a typo ( #6075 )
2022-06-17 18:46:46 +08:00
Man, Jianting (Meco)
02b176f8cb
[arduino] add comment ( #6016 )
2022-06-04 13:20:30 +08:00
Stanley Lwin
04a17d469a
[device][adc] implement adc_get_vref ( #5988 )
...
* add adc_get_vref
add stm32_adc_get_vref
2022-05-29 10:22:33 +08:00
Wayne
37d9921aa8
[MTD-NAND] Add private data pointer. ( #5974 )
...
* Disable TRNG function in default configuration.
* Fix building issue
* To catch context of upper file system.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-05-23 01:47:07 +08:00
Stanley Lwin
f92c26a60b
[adc.c] add finsh voltage conversion command ( #5937 )
...
* Update adc.c
add finsh voltage conversion command
2022-05-19 10:36:50 +08:00
lgnq
9ab2094ef6
Add RT_SENSOR_VENDOR_MELEXIS in sensor.h
...
Melexis is the fourth largest automotive sensor manufacturer in the world.
www.melexis.com
2022-05-18 08:43:36 +08:00
BreederBai
c28b79b7d7
硬件驱动(VCOM):增加获取USB虚拟串口连接状态的接口 ( #5881 )
...
* 硬件驱动(VCOM):增加获取USB虚拟串口连接状态的接口
2022-04-28 20:30:51 +08:00
tyx
13f8a99e46
[drivers][usb] Fix compilation warning
2022-04-23 23:08:47 +08:00
Meco Man
175ca2ee09
[dac] add get resolution method
2022-04-23 23:03:59 +08:00
Man, Jianting (Meco)
c2a0995545
[adc] 支持adc框架获取BSP的ADC分辨率 ( #5853 )
2022-04-22 22:26:41 +08:00
tyx
e414cb459d
[components][drivers] Update device type definition and command definition
2022-04-18 09:38:56 +08:00
Wayne
615dbe946c
Fix return value of rt_dac_write function. ( #5816 )
...
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-04-15 17:09:37 +08:00
Yang sheng
eb2fc60207
[bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64… ( #5785 )
...
* [bsp] Make all warnings into errors with qemu-vexpress-a9 qemu-virt64-aarch64 and stm32f411-st-nucleo.
* [RTC] Fix compile errors
2022-04-09 00:39:00 +08:00
Tangyuxin
da3d61e043
[device]Detailed classification of devices types ( #5769 )
2022-04-06 21:12:39 +08:00
tyx
782b9dd45a
[components][sdio] Support DDR mode
2022-04-06 16:06:46 +08:00
tyx
b80f581562
[compilers] Fix c/c++ compilation warnings and errors
2022-04-06 10:27:38 +08:00
tyx
e896021b56
[drivers][rtc]Add comments
2022-04-06 10:26:04 +08:00
tyx
8a7babadda
[drivers][rtc]Add get/set timestamp function
2022-04-06 10:26:04 +08:00
tyx
0ef4560030
[drivers][rtc] Adjust ops function input parameters
2022-04-06 10:26:04 +08:00
Tangyuxin
59e751eb2a
[sensor]Add blood pressure sensor type ( #5766 )
2022-04-05 19:35:23 +08:00
朱天龙 (Armink)
039efbb075
完善 Serial V2 框架 ( #5770 )
...
* [stm32] fix h7 uart V2 driver unused code.
* [DeviceDriver][serialv2] fix the serialv2 when using for console device on DMA mode.
* [stm32][art-pi] using serial v2 by default
* [DeviceDriver][SerialV2] Add termios for serial@V2 .
* [BSP][STM32] Add hardware flow control for STM32 serial@V2 driver.
* [DeviceDriver][Serial@V2] Add hardware flow control for serial V2.
2022-04-04 17:25:04 +08:00
guo
b2e2ab28e5
[update] Fix some spelling mistakes. ( #5738 )
2022-03-29 21:29:08 +08:00
Man, Jianting (Meco)
91ea28a625
[pipe.h] 移除多余的头文件,防止形成头文件递归包含 ( #5621 )
2022-03-02 18:45:19 +08:00
guo
9b44734643
Merge pull request #4378 from LeeChunHei/usbh_construct
...
添加多過一個usb host的可能性
2022-01-26 10:39:46 +08:00
Meco Man
8bf5a28528
[workqueue] 增加rt_work_urgent
2022-01-20 20:58:46 +08:00
Meco Man
36cbc1fd2f
[workqueue] time参数改为ticks,防止误解单位为ms
2022-01-20 20:58:46 +08:00
Wayne Lin
7e6ffd3447
Support multi-partition/-card mounting.
2021-12-24 05:36:12 +08:00
guo
fb7b9f4fb4
Merge pull request #5318 from enkiller/1201
...
[components][src] Optimize interrupt disable time
2021-12-21 17:40:59 +08:00
chenyingchun0312
417efc370f
[drivers/i2c] optimize i2c driver framework
2021-12-17 10:25:08 +08:00
guo
92cf02a34d
Merge pull request #5262 from ShermanShao/master
...
[BSP/RA6M4-CPK] 添加 CAN、RW007 的支持
2021-12-14 11:24:47 +08:00
Sherman
0f0093aa3e
[UPDATE]添加新驱动、完善 BSP
...
- [update] 更新 template 工程配置
- [update] 更新 PLATFORM 配置
- [add] 添加 ra icu 驱动文件
- [add] 增加传感器类型 IAQ、EtOH
- [add] 添加 CAN 驱动
- [add] 添加 RW007 驱动及使用说明
- [fix] GCC 编译问题
- [fix] flash 驱动
- [fix] 修改 scons 脚本配置
2021-12-14 11:04:46 +08:00
张世争
7455e2487b
[components] PM框架更新
2021-12-14 06:12:55 +08:00
Meco Man
7ff976dab3
[posix] [pipe] add IPC for POSIX and add pipe for it
2021-12-14 06:12:04 +08:00
aozima
9a3d0a0ea2
cputime support 64bit.
2021-12-01 20:08:32 +08:00
tangyuxin
a77cc81876
[components][drivers] format file
2021-12-01 14:41:13 +08:00
tangyuxin
5128a27c43
[components][src] Optimize interrupt disable time
2021-12-01 14:19:25 +08:00
Meco Man
a1cc3d43e7
modify time.h to sys/time.h
2021-11-23 22:38:00 -05:00
Meco Man
e538c5aa70
[workqueue] rename rt_workqueue_critical_work as rt_workqueue_urgent_work
2021-10-20 15:48:07 -04:00
armink
816a99d88e
[DeviceDriver][RTC] Add RT_DEVICE_CTRL_RTC_GET_TIMEVAL and RT_DEVICE_CTRL_RTC_SET_TIMEVAL ops
2021-09-29 17:52:10 +08:00
armink
ff0b6d241b
[DeviceDriver][RTC] Remove RT_DEVICE_CTRL_RTC_GET_TIME_US and RT_DEVICE_CTRL_RTC_SET_TIME_US. Add RT_DEVICE_CTRL_RTC_GET_TIMEVAL and RT_DEVICE_CTRL_RTC_SET_TIMEVAL. The RT_DEVICE_CTRL_RTC_GET_TIMEVAL cmd can get second time and microsecond time.
2021-09-29 17:12:27 +08:00
guo
55a302cd09
Merge branch 'master' into usbh_construct
2021-09-28 10:36:54 +08:00
Bernard Xiong
4423b487c5
Merge pull request #5044 from BernardXiong/libc_pr
...
[libc] remove rtlibc
2021-09-11 20:00:39 +08:00
BernardXiong
0b13409c16
[BSP] fix compiling issue with libc
2021-09-11 18:09:22 +08:00
BernardXiong
3dc820b371
[drivers] fix stdint issue in cputime
2021-09-11 16:00:00 +08:00