Commit Graph

6149 Commits

Author SHA1 Message Date
tangzz98 82bf18b771
ESP32: Support applying patch to local IDF (#6467) 2022-09-26 00:55:51 -04:00
YuQi 5debfdd84d
[TMS320F28379] implement PWM driver (#6457)
增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法:
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)
2022-09-25 22:41:00 -04:00
Man, Jianting (Meco) c7a9481831
[rtduino] 对接STM32F412 NUCLEO (#6461) 2022-09-25 22:38:35 -04:00
YangZhongQing 1c2d05d545 RTC STM32F1 Enable PWR and BKP clocks in the same time
bsp\stm32\libraries\HAL_Drivers\drv_rtc.c在STM32F10x上有一个“RTC首次上电时BKP时钟没使能”的问题。

STM32F10x要求:
写RTC Domain and RTC registers之前需要__HAL_RCC_BKP_CLK_ENABLE(详见:stm32f1xx_hal_rtc.c里面的##### Backup Domain Access #####)

问题分析:
1、RTC首次上电时:由于HAL_RTC_Init初始化之前没有使能BKP时钟,所以对RTC registers的初始化无效。
2、然后用date命令设置时间,调用到set_rtc_time_stamp也没有__HAL_RCC_BKP_CLK_ENABLE,所以HAL_RTCEx_BKUPWrite写的值无法真正永存于BKP,重启后就丢失。
最终导致:对于RTC首次上电的情况,每次重启后RTC_BKP_DR1里的值都不是BKUP_REG_DATA,导致永远无法调用到rt_rtc_f1_bkp_update()去使能BKP时钟。

解决办法:
参考STM32F10x_StdPeriph_Lib_V3.5.0\Project\STM32F10x_StdPeriph_Examples\RTC\Calendar\main.c里面的RTC_Configuration()同时打开RCC_APB1Periph_PWR和RCC_APB1Periph_BKP
2022-09-23 21:04:35 -04:00
supperthomas fc55785e70
[bsp][nrf52840]Add segger rtt function (#6460)
* fix project to AC6

* add the segger_rtt function

* move Kconfig
2022-09-23 09:38:42 -04:00
hg0720 714b93cc3d 添加了 rtc 驱动 2022-09-22 23:25:27 -04:00
BreederBai 61e1e31ca9
[bsp/stm32] 简化drv_usart中的DMA接收逻辑 (#6357) 2022-09-22 14:13:57 +08:00
YangZhongQing 50cb4be8ce
bsp beaglebone: add IAR support (#6443)
* bsp beaglebone: add IAR template files and fix it's build error

ATTENTION:
project.* was generated by scons, so I add it to gitignore.
rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong.
(我只是从STM32里面抄来,然后根据自己的理解改了一下,并没有验证这些参数的正确性,
我也不知道怎么用命令行调用这些参数来编译)

* bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt

am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds,
the difference will easy cause later developer got below error:

=> go 0x80200000
## Starting application at 0x80200000 ...
undefined instruction
pc : [<8200956c>]	   lr : [<8ff62497>]
reloc pc : [<728a956c>]	   lr : [<80802497>]
sp : 8df37358  ip : 00000000	 fp : 00000002
r10: 8df4d448  r9 : 8df3feb8	 r8 : 8ffd30f8
r7 : 8ff78089  r6 : 00000002	 r5 : 80200000  r4 : 8df4d44c
r3 : 80200000  r2 : 8df4d44c	 r1 : 8df4d44c  r0 : 00000001
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32
Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf)
Resetting CPU ...

resetting ...

* libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support

IAR new project defualt Processor mode is Thumb, this will cause user
easy occur the following error:
...
msh />Execption:
r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c
r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000
r08:0x00000000 r09:0x00000000 r10:0x0000000a
fp :0x0000000a ip :0x65687374
sp :0x00006c6c lr :0x0000008a pc :0x88008be0
cpsr:0x880001bc
software interrupt
shutdown...
(0) assertion failed at function:rt_hw_cpu_shutdown, line number:160

* bsp beaglebone: change IAR template.ewp code use Arm mode

Arm mode bin size will bigger than Thumb mode

* libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable

Reviewer mysterywolf say:
麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable
rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
2022-09-22 14:13:34 +08:00
Meco Man 560166477e [stm32f401 nucleo] update main.c revert blinking LED 2022-09-20 10:33:12 -04:00
liyangyang f71a287a68 [RTduino]更新stm32f469的对接文件 2022-09-20 10:32:56 -04:00
Tangyuxin a4829b1c00
[fix] Fix simulator compilation warnings (#6438)
* [fix] Fix simulator compilation warnings

* Update bsp/simulator/rtconfig_project.h

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-20 10:31:11 -04:00
Wayne 746d7a01bd
[bsp/nuvoton] Support NuMaker-IoT-M467 board (#6448)
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-20 10:30:21 -04:00
liyangyang 4e9786cdab [RTduino]stm32f103-blue-pill更新对接文件 2022-09-19 23:36:22 -04:00
hg0720 90d9b449b1
[ch32v307v-r1] 添加了模拟iic驱动 (#6447) 2022-09-19 10:33:55 -04:00
xiao xie 4b897fea3f
[imxrt1170-m7]Adjust pro dir structure (#6446) 2022-09-19 01:20:02 -04:00
Man, Jianting (Meco) 8d3c1f7008
[rtduino]重新整理pinout (#6445)
* [rtduino][stm32l475-pandora] 重新整理pinout

* [rtduino][bluepill] 整理pinout

* [rtduino][stm32-f401nucleo]整理pinout

* [rtduino][stm32-pandora] 整理pinout

* [rtduino][stm32f072]整理pinout
2022-09-18 22:14:35 -04:00
liyangyang dc6b9fde98 [RTduino]stm32f401-st-nucleo 更新对接文件 2022-09-18 10:05:36 -04:00
hg0720 60d6e42941
[ch32v307v-r1] 添加dac驱动 (#6440) 2022-09-18 09:32:56 -04:00
linshire fdcee2da20
[BSP] CH32V307 add drv_adc (#6431)
添加了ch32v307的adc驱动,已在ch32v307评估班上对adc1ch5进行了验证,并修改了kconfig以及scons脚本,可以成功编译以及使用
2022-09-16 22:50:57 -04:00
myshowtogo 4637eb16dc Modified bsp/stm32/libraries/HAL_Drivers/drv_can.c
修复字符串比较错误
2022-09-16 08:36:48 -04:00
charlown 5ed3e81490
使用 __ARMCC_VERSION 代替 __CC_ARM 用以支持AC6编译 (#6436)
将__CC_ARM 替换成 __ARMCC_VERSION 用以支持AC6编译,通过gd32f303测试。
2022-09-16 08:13:40 -04:00
Man, Jianting (Meco) 1249bc45f9
完善bsp beaglebone的基本使用 (#6434)
* bsp beaglebone: rerun menuconfg

* bsp beaglebone: add uart0 support

* bsp beaglebone: use uart0 as console

* bsp beaglebone: add heap init

fix rt_application_init() error:
(m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288

* bsp beaglebone: add mmu & interrupt init

must init mmu, otherwise no interrupt is generated, cause scheduler can't work.
I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c

* libcpu am335x: reset interrupt controller before init vector

I think reset before init is more better

AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c
IntAINTCInit()

* bsp beaglebone: full gpio driver support

* bsp beaglebone: add tftpboot way to uboot_cmd.txt

* bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one

Co-authored-by: YangZhongQing <vipox@qq.com>
2022-09-15 23:56:31 -04:00
Meco Man 2133b8536a [stm32][bluepill] update readme 2022-09-15 23:52:23 -04:00
xiao xie a0ca06b499
[imxrt 1170]add flexspi support (#6429)
* [imxrt 1170]add flexspi support

* format file

* format file

* update flexspi serial root clk to 80MHz

* format file
2022-09-15 05:08:26 -04:00
Man, Jianting (Meco) 09e29c4d93
[rtduino][bluepill] 增加英语readme (#6425)
* [rtduino][bluepill] update readme
2022-09-14 21:44:36 -04:00
tangzz98 cb7fd304ff
ESP32_C3 migrate to ESP-IDF package (#6427) 2022-09-14 03:49:05 -04:00
xiao xie 52e1d76254
[imxrt 1170]Support us delay (#6424)
* add us delay

* formating file
2022-09-13 07:53:30 -04:00
Wayne c9db6ed151
[bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers. (#6416)
* [bsp/nuvoton] Support NuMaker-M467HJ BSP and update drivers.

* Format files.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-09-12 07:36:11 -04:00
Harrypotter-zhs 4a83592596 完善README文件的格式 2022-09-11 09:52:20 -04:00
xiao xie 8317b9058a
[imxrt1170]update sdk files (#6405)
* update sdk files

* add dcd config

* format files

* formating file
2022-09-09 16:59:08 -04:00
Harrypotter-zhs 24bf4ad270 对README文件中的大小写和文章格式修改 2022-09-09 10:44:28 -04:00
xiao xie 2577fcc366
add sdio support (#6385)
* add sdio support

* update board kconfig

* 优化SD卡挂载文件系统

* 使用通用接口实现led的闪烁操作
2022-09-08 23:20:50 -04:00
liYangYang 19106eb3a1
[RTduino]更新blue-pill引脚分布 (#6400)
* [RTduino]更新引脚分布

* update

* update readme
2022-09-08 23:07:55 -04:00
Meco Man f35791e36b [rtduino] [stm32f072] update i2c device readme 2022-09-09 10:47:22 +08:00
hg0720 cd2a381a13 修改了ch32 的 readme 文件 2022-09-08 21:38:21 -04:00
小李憨憨 dd92a4979f Modify error annotations 2022-09-08 13:45:03 -04:00
liyangyang 29c6f6ed73 Remove duplicate initialization code 2022-09-08 07:19:45 -04:00
Yifang 464f827254
[annotation] renesas默认使用串口V2标准 (#6391) 2022-09-07 21:05:17 -04:00
Meco Man ce16945cba [kernel][version] 采用新的版本宏定义
版本控制规范:https://semver.org/

目前的版本子号不是很规范,其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION                      4L              /**< major version number */
#define RT_SUBVERSION                   1L              /**< minor version number */
#define RT_REVISION                     1L              /**< revise version number */
```

参考ESP32:
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR   2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR   0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH   3
```

建议改成:
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR   4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR   2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH   0
```
2022-09-07 10:11:45 -04:00
liyangyang c75f52ff3a [RTduino]Add SPI adaptation 2022-09-07 10:11:23 -04:00
Yifang f325032c5e
[stm32h750-artpi][Kconfig] add SPI3 (#6382)
* [add] board/Kconfig 完善SPI3部分

* [add] 提交代码注释

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-09-06 22:00:30 -04:00
xiao xie 05afaa9fc5
[imxrt1170]Fix flexcan driver (#6378)
fix flexcan driver for imxrt1170
2022-09-06 21:20:04 -04:00
小李憨憨 5967ce44ff Add annotations 2022-09-06 14:28:45 -04:00
Freey0 e0f61010e2 fix: Fix accidentally close PDMA used by other devices when close the serial port 2022-09-06 01:06:24 -04:00
xuhonghao d321e52412
[bsp][APM32][APM32F407VGT6] (#6377)
使用APM32F407VGT6芯片发现shell命令行无法接收命令,解决shell命令行输入问题

将board.c中的:
GPIO_ConfigStruct.mode = GPIO_MODE_IN;
GPIO_ConfigStruct.pupd = GPIO_PUPD_UP;
修改为:
GPIO_ConfigStruct.mode = GPIO_MODE_AF;
GPIO_ConfigStruct.pupd = GPIO_PUPD_NOPULL;

使用APM32F407VGT6测试成功
2022-09-06 01:01:03 -04:00
Fan Yang c1b22ede30
Add BSP for HPM6750EVK and HPM6750EVKMINI (#6374)
* Add CANFD support and correct typos

- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

* update

* bsp: support boards from hpmicro

- Supported HPM6750EVKMINI
- Supported HPM6750EVK

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
2022-09-06 00:48:16 -04:00
linshire ae62b57632 add drv_ulog.h so that the project can built successfully 2022-09-06 00:29:51 -04:00
linshire 36e03d0448
Ch32 v307 kconfig fix (#6373)
* add Kconfig file "USART2~USART8"
2022-09-05 11:13:04 -04:00
xiao xie 20c4798239
[imxrt1170]add rtc Kconfig (#6370) 2022-09-05 07:39:10 -04:00
xiao xie d1daf06619
[imxrt1170]Update iar project (#6369) 2022-09-04 21:47:03 -04:00