12424777f6
add bsp stm32l072
2016-09-22 12:31:38 +08:00
c2d8bff672
[Bsp] stm32f10x delete compiler c99 mode
2016-09-21 11:31:53 +08:00
8c229e412a
[Bsp] lpc408x fix compiler error
2016-09-21 11:10:25 +08:00
e0b371edfd
[BSP] LPC408X Delete compiler c99 mode
2016-09-21 10:48:21 +08:00
5de8bb2c50
Update rtconfig.h
...
When useing the macro of _WIN32 in the file of rtconfig.h , then the file of dfs_win32.c will removed and compiled some mistakes. Fix it.
2016-09-01 14:09:42 +08:00
cd43855e48
Merge pull request #658 from xuzhuoyi/master
...
[BSP] Add support for STM32F429I-DISC1
2016-08-22 21:06:22 +08:00
5f0102865d
[bsp][stm32f429-disco] Fix assertion failed at function:rt_malloc
2016-08-22 15:59:53 +08:00
119da5b035
[bsp][stm32f429-disco] Change StdPeriph to HAL
2016-08-22 01:03:17 +08:00
234f1c6995
[bsp][stm32f429-disco]Fix hard fault while init heap
2016-08-20 23:04:01 +08:00
715cbb7809
[bsp][stm32f429-disco] Add SDRAM support
2016-08-20 18:27:07 +08:00
1e2854381b
disable stm32 EMAC hardware checksum.
2016-08-19 17:31:12 +08:00
94cb87223e
[bsp][stm32f429-disco] Add stm32f42x GPIO index
2016-08-19 17:25:59 +08:00
1ea925f9d1
[bsp] add new bsp stm32f429-disco
2016-08-19 00:35:30 +08:00
f4f4bd543d
[BSP] Add usart DMA Rx driver to stm32f40x.
2016-07-09 11:07:20 +08:00
c72433560d
flush cache after exception code install on ls1b
2016-06-15 08:42:38 -07:00
b96f07e477
flush cache after exception code install
2016-06-15 08:09:56 -07:00
4503e5d79d
Merge pull request #634 from margguo/master
...
[BSP] Update gpio.c in BSP/stm32f10x/drivers/gpio.c
2016-05-23 22:23:03 +08:00
09b0e48439
add 48 pins IC define in BSP/stm32f10x
2016-05-23 22:15:14 +08:00
4bbbfab29c
add 48 pins IC define in BSP/stm32f10x
2016-05-23 22:00:21 +08:00
3defb749cb
add 48 pins IC define in BSP/stm32f10x
2016-05-23 21:57:19 +08:00
7d17f50a31
[BSP] Add usart DMA Rx driver to stm32f10x.
2016-05-14 13:43:14 +08:00
eb320a0104
[BSP] fix the CRLF issue in usb_ch9 of imx6sx
2016-05-04 08:24:21 +00:00
46e963b315
[CHG] fixed compile error under linux platform
2016-04-25 15:42:07 +08:00
fd7a65b4be
[LIBC] remove minilibc when compiling simulator under Linux
2016-04-24 19:59:48 +08:00
255f8b7c34
[BSP] Add BSP for Ingenic X1000 CPU
2016-04-24 19:34:41 +08:00
43f68131ce
[BSP] Add fh8620 bsp from Shanghai Fullhan Microelectronics Co., Ltd.
...
FH8620 BSP
Copyright (c) 2016 Shanghai Fullhan Microelectronics Co., Ltd.
All rights reserved
2016-04-18 13:52:39 +08:00
0d63eb5f6d
fix hardfault when RT_CAN_USING_BUS_HOOK is enabled in bsp/stm32f10x
...
function `rt_pin_write` is invoked by function `can_bus_hook`, and it should to be initialized by gpio.c.
but gpio.c was not added in SConscript
2016-04-14 23:47:32 +08:00
b420e83da4
fix can baud rate config error in bsp/stm32f10x fix #597
...
enum CANBAUD was changed in components/drivers/include/drivers/can.h ,
which causes array index out of bound in bsp/stm32f10x/drivers/bxcan.c
temporarily remove RT_CAN_USING_BUS_HOOK, because there are some bugs in
bsp/stm32f10x/applications/canapp.c function can_bus_hook
2016-04-13 21:24:36 +08:00
a6fcf8cf1f
remove function finsh_set_device in application.c in bsp/stm32f10x
...
finsh_set_device is not needed since version 1.2.0
2016-04-09 13:15:49 +08:00
e35ad3e677
fix initialization error in bsp/stm32f10x
...
temporarily disable canapp initialization.
2016-04-03 21:39:33 +08:00
5c86147236
Update sd_sim.c
2016-03-23 23:08:35 +08:00
55bbe7290e
Delete gic.h_old
2016-02-02 15:16:22 +08:00
0e916cee16
Delete gic.c_old
2016-02-02 15:16:14 +08:00
97e263c498
Delete interrupt.h_old
2016-02-02 15:15:57 +08:00
e377814ce9
[bsp] rename bsp name from stm32f411re to stm32f411-nucleo
2016-01-25 16:10:54 +08:00
48e765fdee
[bsp][stm32f411-nucleo] Remove unused BSP library.
2016-01-25 15:51:33 +08:00
313c775b22
[BSP][STM32F411RE]
...
1. Target board: STM32F411RE-Nucleo
2. Using STM32 HAL library version 1.4.3 (STM32Cube_FW_F4_V1.10.0)
2016-01-25 15:39:34 +08:00
585475991c
update get “geometry” source
...
in function internal，get "geometry" form paramater "dev->user_data", not use public variable "SDCfg"
2016-01-06 09:54:39 +08:00
3e890570c9
[BSP] change the template setting in lpc176x;
...
fix the compiling warning when enable DFS.
2016-01-06 05:05:08 +08:00
2e1af44270
add RT_DFS_ELM_CODE_PAGE
...
解决因为缺少RT_DFS_ELM_CODE_PAGE 导致scons无法正确配置工程文件系统代码页问题。
2016-01-04 09:03:08 +08:00
fc2467a190
fix keil armcc compiling report "Error: expected an expression"
2015-12-10 21:47:53 +08:00
b2d55d2c8c
correct stm32f10x can sendmsg rtr flag error
2015-11-23 09:43:48 +08:00
33de63fbe2
correct compile error when using can
2015-11-23 09:43:17 +08:00
c515c88f3f
Add -nostartfiles option for link flags
2015-11-18 00:09:18 +08:00
b7fc26e169
Merge pull request #584 from xueliu/master
...
[BSP] Enable Heap for nRF51822
2015-11-15 16:38:40 +08:00
06765bfd4a
Change the head files in uart.c.
2015-11-13 23:25:59 +08:00
65f1d8f409
Enable Heap for nRF51822
...
Fix the undefined symbol NRF_SRAM_END
Configure SRAM part for Heap
2015-11-13 13:39:40 +01:00
6d738f79a8
Merge pull request #579 from miaoqiongb/patch-2
...
[BSP] Update uart.c in lpc176x
2015-11-12 10:01:55 +08:00
3983f39f34
Add iar compiler support for am335x.
2015-11-11 23:44:05 +08:00
2b0a5b93b7
Update uart.c
...
Add interrupt enter and leave
2015-11-11 10:43:57 +08:00
31c9f3ef3b
Clean and fix comments
2015-11-11 00:09:15 +01:00
6bad759c1f
nrf52832 board.c clean
2015-11-11 00:00:42 +01:00
d694043cc7
Initial bsp support for nRF52832
2015-11-10 23:47:12 +01:00
dedc22379a
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-11-09 15:25:57 +08:00
59653699b2
Update uart.c
2015-10-30 17:19:53 +08:00
8a73dc1be6
Update uart.c
...
iir = LPC_Uart->LSR; //oe pe fe oe read for clear interrupt
2015-10-30 14:41:21 +08:00
3677f4de9f
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-23 22:10:13 +08:00
856db6ead1
Merge pull request #570 from cedar-renjun/patch-6
...
Update board.h
2015-10-18 17:24:57 +08:00
f19d4381e4
Update stm32f40x_flash.icf
...
Export the end address of ram, to avoid hard-code heap size in application
2015-10-17 21:01:41 +08:00
1e3c79602d
Update board.h
...
Use *.icf ram symbal, to avoid hardcode.
2015-10-17 20:58:42 +08:00
8f607deff3
[BSP] Add EMAC driver in lpc4088
2015-10-15 23:14:27 +08:00
066ec6dc91
[BSP] remove display_controller.h/c from ls1cdev bsp
2015-10-15 12:22:16 +08:00
402732ebb9
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-14 14:48:22 +08:00
c5fd1aaf5f
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-14 11:08:04 +08:00
e460034a97
[BSP] use DoBuilding to replace env.Program/EndBuilding
2015-10-14 11:07:03 +08:00
fd53d3ec28
Merge pull request #567 from cedar-renjun/patch-5
...
[BSP] Update and rename readme.txt to readme.md in stm32f4
2015-10-13 12:05:22 +08:00
942d16f3c3
Merge pull request #566 from cedar-renjun/patch-4
...
[BSP] include iar startup code in stm32f4
2015-10-13 12:05:10 +08:00
238ebdd045
Update and rename readme.txt to readme.md
2015-10-13 11:52:05 +08:00
34a2200428
include iar startup code
...
fixed bug: 'scons --target=iar -s' output iar project missing startup code, and link file
修复scons生成IAR工程中没有startup code和链接文件，导致工程中断异常和Finsh无法工作
2015-10-13 11:40:59 +08:00
78cb445af2
Create stm32f40x_flash.icf
2015-10-13 11:34:10 +08:00
1c91512e97
[bsp][stm32f746g-disco] Fix MPU init bug.
...
1. Fixed the bug that MPU init function was called 2 times.
2015-10-13 09:49:27 +08:00
369557a981
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-10-09 08:56:58 +08:00
a65ee8ac45
[BSP] disable module feature under simulator for Linux
2015-10-02 08:16:15 +08:00
d2ec1f3eaa
[DFS] remove st_blksize in the struct stat
2015-10-01 06:46:52 +00:00
1e4bcaca3e
[BSP] remove rtgui_demo in the simulator BSP
2015-10-01 11:34:10 +08:00
5ac0ed7403
[BSP] remove testdll in the simualtor BSP
2015-10-01 11:29:59 +08:00
1ac6bc6c88
[BSP] fix compiling issue in simulator for Linux
2015-09-30 10:21:55 +00:00
cdf4c7e897
[BSP] Enable module application in simulator BSP
2015-09-30 18:06:09 +08:00
aa190ed5f6
[BSP] enable file system feature in simulator BSP
2015-09-30 17:57:58 +08:00
7e45f059dc
[BSP] Update simualtor bsp for Win32/MSVC
2015-09-30 16:26:40 +08:00
4ab8ea53c2
Merge pull request #556 from ArdaFu/master
...
[bsp][stm32f746-disco] Add support of IAR tool chain
2015-09-30 11:10:36 +08:00
a8828eee89
[bsp][stm32f746-disco] Add support of IAR tool chain
...
1. Add IAR project template and link scripts. Add missing CXX configuration for IAR tool chain in rtconfg.py.
2. Modify all link scripts, Using ITCM interface.(Changing flash start address from 0x0800_0000 to 0x0020_0000).
2015-09-29 11:53:23 +08:00
5ed2d0ea3b
[bsp]add stm32f4xx bsp rtc driver
2015-09-29 06:53:44 +08:00
3164e33de1
Update and rename application.c to main.c
2015-09-26 11:37:11 +08:00
090153f94f
[bsp][stm32f746-Disco] Cleanup code
...
1. Using RT_USING_COMPONENTS_INIT and RT_USING_USER_MAIN
2. Cleanup code
2015-09-25 15:35:37 +08:00
168bb7843f
Merge remote-tracking branch 'upstream/master'
2015-09-24 20:36:16 +08:00
9413a61499
Merge branch 'master' of https://git.coding.net/RT-Thread/rt-thread
2015-09-24 17:23:00 +08:00
3faca6d5df
[BSP] update stm32f7-disco
...
code cleanup.
2015-09-24 16:03:09 +08:00
91ae73e4e6
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-09-24 15:55:26 +08:00
a8dc960ba1
[BSP] update bsp config of lpc4088
2015-09-24 03:08:11 +00:00
be9b3d1df6
[BSP] Update stm32f7-disco to avoid gcc compiling error
2015-09-21 10:02:00 +00:00
72f79d8eef
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
2015-09-20 14:51:22 +08:00
9ad05db536
[BSP] fixed stm32f7-disco interrupt issue.
2015-09-20 14:47:50 +08:00
a0de58a008
[BSP] fix x86 bsp compiling issue
2015-09-15 11:50:29 +00:00
342e8d688d
Merge pull request #546 from heyuanjie87/ForPullRequest
...
[DeviceDrivers] Add hardware timer framework
2015-09-09 22:30:45 +08:00
f8012b9000
[lpc408x]添加定时器驱动
2015-09-06 16:37:43 +08:00
d19f424909
简化操作接口
2015-09-06 15:05:47 +08:00
31f24f3460
fix compile error.
2015-09-04 22:10:22 +08:00
907190124b
remove unused source file.
2015-09-04 22:00:54 +08:00
2021f5a276
Add the license.
2015-09-04 21:58:08 +08:00
b71cb4c09d
Add dm365 porting.
2015-09-04 12:30:20 +08:00
c84887d021
加入定时器设备
2015-09-02 22:00:24 +08:00
9e3c42273d
Merge remote-tracking branch 'upstream/master'
2015-09-02 12:18:31 +08:00
df0c6a9e3a
[BSP] fix LIBC options in stm32f7 rtconfig.h
2015-09-02 12:07:09 +08:00
8d309a40f5
[BSP] Add copyright information.
2015-09-02 12:06:40 +08:00
ec87b91011
Merge remote-tracking branch 'upstream/master'
2015-08-31 17:19:07 +08:00
7610ce3607
[BSP] [ASM9260T] Fix compile errors.
...
1. Add Heap_Size define for Keil toolchain
2. Disable pthreads in rtconfig.h
2015-08-31 09:36:26 +08:00
7164257ecd
Merge pull request #540 from pangweishen/master
...
[BSP]fixed some bugs for compile.
2015-08-28 17:22:32 +08:00
4d01aaf932
[BSP]fixed some bugs for compile.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-08-28 16:57:41 +08:00
62a2a49c41
[BSP] Update project files for stm32f0x
2015-08-19 09:51:14 +08:00
4a66474329
Merge remote-tracking branch 'upstream/master'
2015-08-10 08:14:20 +08:00
300c7fd8ec
[BSP] reduce the code size for STM32F0x
2015-08-09 15:34:21 +08:00
200282a0bc
[BSP] use RT_UNUSED instead of UNUSED
2015-08-09 11:34:41 +08:00
358837bb89
[BSP] Add README.md for stm32f7-disco
2015-08-09 09:37:20 +08:00
5a259bd93c
[BSP] Add imx6sx
2015-08-09 09:36:12 +08:00
fc54a74abb
[BSP] stm32f7-disco cleanup
2015-08-09 09:17:28 +08:00
33b95be42a
[BSP] rename stm32f7 to stm32f7-disco
2015-08-09 08:36:52 +08:00
af8a91457e
[bsp]add the stm32f74x bsp.
2015-08-07 13:30:13 +08:00
330ab2ca0d
[BSP]fix lslc compiling issue when using RT_USING_LIBC.
2015-08-06 16:12:37 +08:00
5ccbf073cc
Merge pull request #531 from pangweishen/master
...
[BSP] update the value of DEVICE in rtconfig.py.
2015-08-05 18:29:02 +08:00
d491b30c35
[BSP] update the value of DEVICE in rtconfig.py.
2015-08-05 17:10:49 +08:00
fd69283f3a
[BSP] fix ls1b compiling issue
2015-08-03 17:41:29 +08:00
db5fc259a2
[BSP] remove the asssert_failed function in lpc176x.
2015-08-03 16:17:48 +08:00
e30ee251e3
[bsp]added the define of RT_USING_LIBC in rtconfig.h.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-07-23 11:20:04 +08:00
5b755b85c8
[BSP] rename the link files
...
Signed-off-by: pangwei <271372443@qq.com>
2015-07-23 10:38:28 +08:00
8b7d2fb5c1
[BSP] use mips-sde-elf for ls1c bsp.
2015-07-22 10:22:40 +08:00
dbea3cc7d5
Merge pull request #521 from chinesebear/master
...
new file: bsp/ls1cdev/ls1b_ram.lds
2015-07-22 10:21:20 +08:00
085682c76b
new file: bsp/ls1cdev/ls1b_ram.lds
2015-07-16 23:19:03 +08:00
62f0def025
1.delete comment code
...
2.add change log
2015-07-16 22:50:24 +08:00
32855cfd3a
rename bsp/stm32f10x/drivers/rtc.c to stm32f1_rtc.c
...
rename bsp/stm32f10x/drivers/rtc.h to stm32f10x/drivers/stm32f1_rtc.h
remove set_date,set_time function.
2015-07-16 02:08:44 +08:00
4ad1b35537
chinesebear add bsp & libcpu
2015-07-09 07:38:07 +08:00
7254c41207
[LPC4088] update CAN driver baudrate config.
2015-07-08 11:26:24 +08:00
b5736b4bff
[LPC4088] correct can driver compiler error and warnings.
2015-07-08 11:26:23 +08:00
b15fb70616
[LPC4088] format code by Astyle.
2015-07-08 11:26:22 +08:00
6fad73c939
[BSP] stm32f10x can code format
2015-07-07 16:31:46 +08:00
b750e11ec1
[bsp]stm32f10x add canapp can bus hook set
2015-07-07 14:37:07 +08:00
b7571b5549
[BSP] stm32f10x fix bxcan for new changed driver
2015-07-07 14:37:04 +08:00
95fe1d15ca
mv rt_components_board_init to rt_hw_board_init
2015-07-05 16:04:27 +08:00
9ddd395eb1
correct canapp.c code indentation
2015-07-05 11:48:22 +08:00
fece837ed9
add canapp.c
2015-07-04 12:20:24 +08:00
ec46aee19b
add lpc408x can driver
2015-07-04 08:14:00 +08:00
b7010ff946
fix bxcan include component.h dirs error
2015-06-30 14:27:05 +08:00
cb54ac8197
[BSP] Add gpio driver support for beaglebone
2015-06-19 04:19:11 +08:00
70aedb7a34
correct bxcan rcv irq error
2015-06-16 08:49:26 +08:00
40123f0973
correct bxcan drive errors
2015-06-16 08:49:25 +08:00
b319fb53e4
correct bxcan rcv msg rtr flag set
2015-06-16 08:49:25 +08:00
77707e32b1
[BSP]update the serial driver.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-06-09 16:26:52 +08:00
b155067b6b
correct bxcan init error
2015-05-26 14:43:46 +08:00
951fd5429c
[BSP] remove Keil MDK3 project file
2015-05-23 10:26:38 +08:00
570e9470b1
[uffs] fix the SConscript file of uffs.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-05-21 17:06:05 +08:00
d3a031c084
[BSP]add some header File
...
Signed-off-by: pangwei <271372443@qq.com>
2015-05-21 15:26:31 +08:00
688f324fea
[BSP] Remove the RT_USING_COMPONENTS_INIT in rt_config.h , and added some components init functions by hand.
2015-05-21 15:05:00 +08:00
be895cc9b2
[BSP] update Keil MDK project file.
2015-05-20 16:57:44 +08:00
8e29e3d98b
add author information
2015-05-15 07:58:21 +08:00
eb56b832ef
Add Can Drv
2015-05-14 16:52:48 +08:00
8257a62990
[stm32f4]更新mdk5工程文件
2015-05-13 21:07:31 +08:00
b25e602afb
fix a eth driver bug to avoid crush
...
fix a eth driver bug to avoid crush
2015-05-13 08:50:14 +08:00
a58078d18a
2015-05-12 15:44:57 +08:00
bd59276640
Update cmem7_eth.c
2015-05-12 13:43:50 +08:00
e38f3aa39c
[BSP] Update Keil MDK project files.
2015-05-11 21:10:25 +08:00
075fb45448
[BSP] update project for LPC176x
2015-05-11 21:05:11 +08:00
d01bab0e39
[bugfix] Open the #define RT_USING_LWIP in rtconfig.h , then build it , the stm32_eth.h can not find.
...
Signed-off-by: pangwei <271372443@qq.com>
2015-05-08 11:34:17 +08:00
6ea06b4bb3
[BSP] Fix the scons compiling issue in mb9bf568r if use armcc.
2015-05-05 10:50:42 +08:00
f59547e782
[BSP] Fix compiling error because pthreads is depended libc
2015-05-04 13:09:07 +00:00
ce08c83c1f
[bsp][asm9260t] modify file name to lowercase.
2015-05-04 17:17:28 +08:00
ae4d8da480
[bsp][asm9260t] modify file name to lowercase.
2015-05-04 16:59:01 +08:00
9f36fd61a4
[libcpu][asm9260t] Add new BSP for AlphaScale ASM9260T
2015-05-04 16:30:05 +08:00
cc6b290640
1.[bsp][sam9260] Modify the define of irq get and ack function.
2015-05-04 16:17:40 +08:00
3563c195fb
update stm32f2/f4: fixed PLL_M define.
2015-04-27 11:54:22 +08:00
2be9959891
correct stm32f10x pin64 define error
2015-04-23 16:11:38 +08:00
bec8b3f59f
Merge pull request #463 from ArdaFu/master
...
[cpu][sam926] Using MMU to map vector table before init INT controller.
2015-04-23 09:12:47 +08:00
b77a1cde89
[bsp][sam9260] Remove unused macro define for assemble start files.
2015-04-22 13:19:13 +08:00
dc3bd14c2a
[bsp][sam9260] Optimize code
...
1. Cleanup unused code in startup.c.
2. Init MMU before init INT contoroller for mapping vector table to visual address 0x0
3. Remove unused section in link scripts.
2015-04-22 13:15:13 +08:00
37b3c8781a
Merge pull request #462 from ArdaFu/master
...
[bsp][sam9260] Add GDB start scripts.
2015-04-17 21:09:45 +08:00
66ac2fb9d7
[bsp][sam9260] Add GDB start scripts. Call user-defined command "reset" when you start debug.
2015-04-17 18:03:05 +08:00
ce5ddc4712
Merge pull request #461 from ArdaFu/master
...
[bsp][stm32f0x] Modify build config to reduce code size for Travis CI
2015-04-16 20:23:08 +08:00
418379c7da
Merge pull request #445 from wzyy2/master
...
x86: fix compile error in c++
2015-04-16 20:22:58 +08:00
0c428b1569
Update rtconfig.py
...
[bsp][stm32f03x] Modify build config to reduce code size for Travis CI
2015-04-16 16:44:15 +08:00
61609a5bf0
[bsp][sam9260] Fix Keil compile error.
2015-04-16 14:15:00 +08:00
f4555bf711
1. [bsp][sam9260] Fix the path of gcc tool chain for travis-ci
...
2. [bsp][sam9260] Remove unused ld file
3. [bsp][sam9260] Add J-Link debug scripts
2015-04-16 11:00:48 +08:00
cf3d639fcb
[libcpu][arm926] Define vector table start at BSP/{board}/platform/ assemble INC files.
2015-04-16 10:35:12 +08:00
a478e0b41a
1. [bsp][sam9260] Switch to use Sourcery Lite GCC tool chain.
2015-04-15 17:21:41 +08:00
6aa242645f
1. [bsp][sam9260] Fix the bug that auto reset after boot 20s. Disable watchdog in rt_lovel_level_init function.
...
2. [bsp][sam9260] Modify SCONS scripts to support IAR tool chain.
3. [bsp][sam9260] Move link strips in to folder link_scripts.
4. [libcpu][arm926] Add copy right to source file and format code.
2015-04-15 16:13:30 +08:00
39452b67b0
1. [cpu] split ARM926 cpu code from AT91SAM9260 BSP
2015-04-14 21:56:34 +08:00
ced7d5a34f
[DeviceDriver] stm32: Remove explicity clear of RXNE flag
...
According to STM32 Manual, the USART RXNE flag will be clear automatically after
read to the USART_DR register[1], so the call to USART_ClearITPendingBit is
unnecessary.
[1]: See RM0090 Reference Manual p.992, Bit 5
2015-04-07 21:09:22 +08:00
75ede181aa
update nrf51822 in bsp
2015-04-06 14:21:25 +08:00
3dc20907c3
add nrf51822 to bsp
2015-04-06 13:46:14 +08:00
d4ec1ed5f9
[bsp]stm32f107/.uvprojx:fix mcu type error
2015-04-03 21:18:10 +08:00
7aeb40204c
Update bsp.h
2015-03-29 21:16:38 +08:00
d642d915eb
[bsp]x86:fix compile error when use bsp.h in c++
2015-03-29 18:42:31 +08:00
6868130cfd
[bsp]x86:fix compile error when use i386.h in c++
2015-03-29 18:41:44 +08:00
93122aaa19
[BSP]stm32f10x: Fix gpio driver for 144pins and 64pins
2015-03-25 10:44:02 +08:00
c377690989
[BSP]stm32f10x: Add gpio driver for pin driver frame
2015-03-24 16:30:37 +08:00
351dd923e3
bsp stm32f10x add uart4 drive
2015-03-11 15:24:09 +08:00
a2fbc5f5a8
Merge pull request #431 from ArdaFu/master
...
[BSP] TM4C129X Fix bugs and errors.
2015-03-11 00:03:53 +08:00
a61d228b76
Nanopb is a plain-C implementation of Google's Protocol Buffers data
...
format. It is targeted at 32 bit microcontrollers, but is also fit for
other embedded systems with tight (2-10 kB ROM, <1 kB RAM) memory
constraints.(http://koti.kapsi.fi/jpa/nanopb/ )
How to use the example:
1. move examples/nanopb to bsp/xxxx/
2. enable macro RT_USING_NANOPB in rtconfig.h
3. regenerate the project file (scons --target=xxxx)
4. rebuild the project
2015-03-10 18:24:17 +08:00
1daa96a214
1. [BSP] TM4C129x : Fix the bug that enable global INT before OS scheduler start the fist thread.
...
2. [BSP] TM4C129x : According to LunchPad, change device id from TM4C1294XCNZAD to TM4C1294NCPDT
2015-03-10 12:13:14 +08:00
4a9c3fae29
Merge pull request #3 from RT-Thread/master
...
sync with official source
2015-03-10 12:01:25 +08:00
584efccad1
Update application.c
2015-03-04 10:32:48 +08:00
c6f88ef726
dfs_win32: add seekdir support
2015-02-02 01:21:40 +08:00
79c37cb30f
[BSP]changed stm32f10x uart driver. make sure the serial transmit
...
complete in putc().
2015-01-31 11:18:59 +08:00
131c41d182
[BSP]support 9 data bits and parity config for stm32f10x uart driver.
2015-01-31 11:14:10 +08:00
1213dec3c9
fix #347
2015-01-31 11:05:00 +08:00
71930b0995
[BSP] Fix the interrupt issue in USART driver of STM32F4.
2015-01-25 16:41:05 +08:00
c1f47af9f1
[BSP] remove RT_USING_VMM in default and let it run in QEMU.
2015-01-21 14:17:36 +08:00
86358d0830
[BSP] code cleanup for usart and gpio driver in STM32F4
2015-01-21 12:36:34 +08:00
756f2c67ab
[BSP] rename the rt_hw_usart_init to stm32_hw_usart_init
2015-01-20 16:02:33 +08:00
bff1bb3d7b
[BSP] update MDK project file for STM32F4
2015-01-20 15:58:37 +08:00
080c8912ea
Merge remote-tracking branch 'upstream/master'
2015-01-20 15:56:52 +08:00
9261c37e0e
[BSP] Add GPIO driver for STM32F4
2015-01-20 07:55:52 +00:00
2b7600bdf3
[BSP] update MDK project file for STM32F4
2015-01-20 15:52:39 +08:00
6acf4a4528
[BSP] Update UART and GPIO driver with framework in STM32F4
2015-01-20 07:23:59 +00:00
c565925169
bsp/{cortex-M}: fix the SysTick_Config
...
SysTick_Config substract one inside the function. So there is no need to
substract one when passing the parameter.
2015-01-09 15:26:06 +08:00
56ab0995c1
Merge pull request #409 from grissiom/lpc43xx
...
Lpc43xx
2015-01-09 10:00:25 +08:00
81b37fb1f9
lpc43xx: add copy-right info in vbus drivers
2015-01-08 17:16:26 +08:00
05a01884e6
lpc43xx: fix clock configure
2015-01-07 17:15:50 +08:00
11026d0579
lpc43xx: clean the .o before building M0 and M4
...
SCons will omit the file in parent dir of SConstruct somehow and build
the object files in that dir instead of in variant dir. This cause
problem because we cannot mix the object files between M0 and M4 which
SCons failed to rebuild. So we have to manually remove the files before
building.
2015-01-07 17:15:49 +08:00
17a75eaa02
lpc43xx: remove the fpu settings in startup_LPC43xx_M0
2015-01-07 17:15:49 +08:00
22938a93ef
lpc43xx: fix some compile warnings
2015-01-07 17:15:49 +08:00
f7415e595e
VBus: added
...
Currently only lpc43xx is supported.
2015-01-07 17:15:49 +08:00
fcff552626
lpc43xx: fix the SConscripts
2015-01-07 10:25:44 +08:00
03a2847f12
lpc43xx: fix some compile warnings
2015-01-07 10:25:44 +08:00
7965708050
lpc43xx: add -Wall
2015-01-07 10:25:44 +08:00
df31744178
lpc43xx: fix the M0 project template
2015-01-07 10:25:43 +08:00
70aaf4237f
fix project.uvoptx can't open,recreate the project.uvoptx. this commit is for post
2015-01-06 21:54:47 +08:00
0ca281c162
lpc43xx: add flash linker script for GCC
2015-01-06 13:40:46 +08:00
bcbe180886
lpc43xx: fix the default RTT_ROOT in SConstruct
2015-01-06 13:39:54 +08:00
fca84daa9d
lpc43xx: fix the startup code for GCC
2015-01-06 12:42:12 +08:00
833339e1c6
lpc43xx: output a newline in the header file
...
Some compiler is brain-damaged that it will yeild a warning for headers
not ended with a newline. Yes, I mean you, Keil.
2015-01-06 11:03:01 +08:00
ff3ab9c0ab
lpc43xx: add readme
2015-01-06 10:46:32 +08:00
090adcf4c0
lpc43xx: don't set the Clock again in M0 core
...
M0 core is always booted by the M4 core. It means that if we are running
in M0, the clock is always configured.
2015-01-06 10:46:32 +08:00
21ef733251
lpc43xx: use the RIT timer as SysTick in M0 core
2015-01-06 10:46:31 +08:00
773a884a4b
lpc43xx: move board.c into M0/M4
2015-01-06 10:46:31 +08:00
d2e4050a70
lpc43xx: update template.uvproj and add sct files
2015-01-06 10:46:31 +08:00
959f6c695f
lpc43xx: move the application code into its own space
2015-01-06 10:46:31 +08:00
5542af8b7c
lpc43xx/driver: fix the VTOR setting
2015-01-06 10:25:43 +08:00
f609a63564
lpc43xx: add uart3 support
2015-01-06 10:25:43 +08:00
a447b5f3cf
lpc43xx: refactor uart drivers
2015-01-06 10:25:43 +08:00
a0b71c1c77
fix stm32f407 uart3 TX config error
2014-12-30 14:18:05 +08:00
3c1c093230
RT_TIMER_TICK_PER_SECOND in rtconfig.h for softtime scheduler ,maybe is not used.
2014-12-23 09:44:13 +08:00
056b3bed4f
create project.uvprojx by scons mdk5 and delete some useless files
2014-12-17 20:34:19 +08:00
f97062baa7
create project.uvprojx by scons and use mdk5
2014-12-17 20:27:39 +08:00
e9825dc47f
change project.uvprojx C/C++ path
...
Before the project was established with RB_ROOT
2014-12-16 20:49:49 +08:00
41f70431f5
add power_lib, Last ignored
2014-12-16 19:57:12 +08:00
e4fdb84e96
add bsp lpc54102
2014-12-16 19:54:29 +08:00
82ef447e44
[BSP] Update lpc176x GNU link script
2014-12-07 03:02:50 +00:00
3abf1fd5ba
Add uart driver and finsh function
2014-11-29 12:34:18 +08:00
d50ab16e6f
Port to gcc and fix keil project
2014-11-25 01:08:13 +08:00
143d3b8224
Merge pull request #2 from RT-Thread/master
...
update from official source
2014-11-24 11:57:31 +08:00
9957f94d0b
[BSP] Port to NuMicro M051 Series support for Nuvoton corp.
...
1. adapt to M052xDN/xDE, M054xDN/xDE, M058xDN/xDE, M0516/xDN/xDE.
2. support heap memory management.
2014-11-23 05:18:15 +08:00
Aubr.Cool
pangweishen
Bernard Xiong
xuzhuoyi
aozima
armink
kontais
margguo
weety
gbcwbz
ardafu
yuht
zhoujie
zchong_cht
Xue Liu
miaoqiongb
winfeng
cedar-renjun
FlyM
heyuanjie87
nongxiaoming
chinesebear
ItsEddy
Alex
Arda
yangfasheng
陈豪 | Jacob Chen
Bright Pan
unknown
prife
Grissiom
Coing