* bsp beaglebone: add IAR template files and fix it's build error
ATTENTION:
project.* was generated by scons, so I add it to gitignore.
rtconfig.py *FLAGS located in "PLATFORM == 'iccarm'" are unverified and maybe wrong.
（我只是从STM32里面抄来，然后根据自己的理解改了一下，并没有验证这些参数的正确性，
我也不知道怎么用命令行调用这些参数来编译）
* bsp beaglebone: add beaglebone_ram.icf ROM address from uboot_cmd.txt
am335x_DDR.icf use 0x82000000, different to uboot_cmd.txt & gcc beaglebone_ram.lds,
the difference will easy cause later developer got below error:
=> go 0x80200000
## Starting application at 0x80200000 ...
undefined instruction
pc : [<8200956c>] lr : [<8ff62497>]
reloc pc : [<728a956c>] lr : [<80802497>]
sp : 8df37358 ip : 00000000 fp : 00000002
r10: 8df4d448 r9 : 8df3feb8 r8 : 8ffd30f8
r7 : 8ff78089 r6 : 00000002 r5 : 80200000 r4 : 8df4d44c
r3 : 80200000 r2 : 8df4d44c r1 : 8df4d44c r0 : 00000001
Flags: nzCv IRQs off FIQs on Mode SVC_32
Code: 5dbffcdd bb9bdf7f abf85423 eff1f77f (7ed7daaf)
Resetting CPU ...
resetting ...
* libcpu am335x: context_iar.S rt_hw_context_switch: add thumb mode support
IAR new project defualt Processor mode is Thumb, this will cause user
easy occur the following error:
...
msh />Execption:
r00:0x8800aaa8 r01:0x802080c5 r02:0x00000000 r03:0x88009b4c
r04:0x00001000 r05:0x00000000 r06:0x00001403 r07:0x00100000
r08:0x00000000 r09:0x00000000 r10:0x0000000a
fp :0x0000000a ip :0x65687374
sp :0x00006c6c lr :0x0000008a pc :0x88008be0
cpsr:0x880001bc
software interrupt
shutdown...
(0) assertion failed at function:rt_hw_cpu_shutdown, line number:160
* bsp beaglebone: change IAR template.ewp code use Arm mode
Arm mode bin size will bigger than Thumb mode
* libcpu am335x: IAR: use rt_hw_cpu_dcache_enable instead of rt_cpu_dcache_enable
Reviewer mysterywolf say:
麻烦把rt_cpu_icache_enable 和 rt_cpu_dcache_enable, 统一改成 rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable
rt_hw_cpu_icache_enable 和 rt_hw_cpu_dcache_enable 是其他bsp也是这么命名的 这是个命名统一的函数
* bsp beaglebone: rerun menuconfg
* bsp beaglebone: add uart0 support
* bsp beaglebone: use uart0 as console
* bsp beaglebone: add heap init
fix rt_application_init() error:
(m != RT_NULL) assertion failed at function:rt_smem_alloc, line number:288
* bsp beaglebone: add mmu & interrupt init
must init mmu, otherwise no interrupt is generated, cause scheduler can't work.
I don't know why need mmu, just seen: bsp/rockchip/rk3568/driver/board.c
* libcpu am335x: reset interrupt controller before init vector
I think reset before init is more better
AM335X_StarterWare_02_00_01_01\system_config\armv7a\am335x\interrupt.c
IntAINTCInit()
* bsp beaglebone: full gpio driver support
* bsp beaglebone: add tftpboot way to uboot_cmd.txt
* bsp beaglebone: optimize am33xx_gpio_hdr, check irqstatus is the last one
Co-authored-by: YangZhongQing <vipox@qq.com>
版本控制规范：https://semver.org/
目前的版本子号不是很规范，其中RT_VERSION甚至和VS那边造成了冲突
```c
/* RT-Thread version information */
#define RT_VERSION 4L /**< major version number */
#define RT_SUBVERSION 1L /**< minor version number */
#define RT_REVISION 1L /**< revise version number */
```
参考ESP32：
```c
/** Major version number (X.x.x) */
#define ESP_ARDUINO_VERSION_MAJOR 2
/** Minor version number (x.X.x) */
#define ESP_ARDUINO_VERSION_MINOR 0
/** Patch version number (x.x.X) */
#define ESP_ARDUINO_VERSION_PATCH 3
```
建议改成：
```c
/* Major version number (X.x.x) */
#define RT_VERSION_MAJOR 4
/* Minor version number (x.X.x) */
#define RT_VERSION_MINOR 2
/* Patch version number (x.x.X) */
#define RT_VERSION_PATCH 0
```
* Add CANFD support and correct typos
- Added CANFD required fields to can.h
- Fixed typos in can.h and can.c
- Corrected all the projects affected by the typo
- Fixed wrong line-ending in some affected can driver files
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
* update
* bsp: support boards from hpmicro
- Supported HPM6750EVKMINI
- Supported HPM6750EVK
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
Co-authored-by: Meco Man <920369182@qq.com>
ch569w-evt: add usbhs device mode driver
* usbd driver tested with cdc_vcom, internal loopback
(can't run both MSH & usbd due to 16KB RAM limitation)
* reduce usrstack & main thread stack size for usbd test
* ch56x_uart.c : iron out UART0_PIN_ALT assignment
* compile_ok
Issues fixed:
(1) update .config: select FINSH_USING_SYMTAB
(2) add rt_size_t in rtconfig_project.h
(3) fix finsh problems of using sym table
(4) update .project to include ipc source codes.
Todo list:
(1) automate the build source selection of ccs and reconcile it with scons
* change compiler
* msh can run now
the key step is to swap the order of rt_interrupt_nest -- and RT_OBJECT_HOOK_CALL(rt_interrupt_leave_hook,()) in irq.c. This is an improvised solution and an issue has been raised.
* Update 2837x_FLASH_lnk_cpu1.cmd
The original one is also fine. Just to make it more rigorous since FSymTab is in data section.
* update readme.md
Complier selection and maintainer update.
Co-authored-by: YuQi <qiyu_sjtu@163.com>
Meco Man
YuQi
bzrobotics
chenbin182
cy023
linshire
hg0720
liYangYang
tangzz98
YangZhongQing
supperthomas
hg0720
BreederBai
Tangyuxin
Wayne
xiao xie
myshowtogo
charlown
Harrypotter-zhs
小李憨憨
Yifang
Freey0
xuhonghao
Fan Yang
linshire
100ask-alen
slhuan
self-confident neko
guozhanxin
Rbb666
winfenggao
emuzit
Yunjie Gu
woody