676279421f
Merge pull request #3098 from murphyzhao/fix-data-type-problem
...
[components/drivers][pm] fix data type problem
2019-09-25 10:04:23 +08:00
260a61d36a
[components/drivers][pm] fix data type problem
...
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2019-09-23 18:02:46 +08:00
8fdff1da0a
Merge pull request #3096 from BernardXiong/fix_imx6ul
...
[BSP][iMX6UL] Fix the Kconfig issue
2019-09-22 12:42:26 +08:00
d376a82e40
[BSP][iMX6UL] Fix the Kconfig issue
2019-09-22 10:51:29 +08:00
47fa1d929f
Merge pull request #3095 from armink/fix_serial
...
Fix serial
2019-09-21 16:15:36 +08:00
5c68b748d7
[bsp/imxrt] Remove the use of device user data on uart driver.
2019-09-21 13:55:16 +08:00
fe6cf948d5
[bsp/stm32] Remove the use of device user data on uart driver.
2019-09-21 13:51:04 +08:00
32baa8e998
Merge pull request #3041 from FlyLu/master
...
fix i2c flags bug
2019-09-21 10:08:21 +08:00
cb90a3c62b
Merge pull request #3094 from a1012112796/writing_zzc_20190921
...
[bsp][stm32][stm32/stm32f427-robomaster-a/]修改部分配置错误
2019-09-21 09:45:49 +08:00
0bae6e884c
[bsp][stm32][stm32/stm32f427-robomaster-a/]修改部分配置错误
...
1. 引入 #3062 '[bsp][Kconfig]在bsp的Kconfig中select组件初始化与user main的选项'所做的修改至本BSP包
2. 删去原rtconfig.h中非必要及无意义的配置，包括sensor,pwm,uart3,dma.
2019-09-21 08:58:08 +08:00
4d63839024
Merge pull request #3092 from liu2guang/finsh_update_dev
...
[修复] 修复msh无法配置超过256字节的长度输入 | Fixed MSH unable to configure input leng…
2019-09-21 07:54:54 +08:00
dfd9fa4d9d
[修复] 修复msh无法配置超过256字节的长度输入 | Fixed MSH unable to configure input length exceeding 256 bytes
2019-09-20 14:48:01 +08:00
3ada5c81d5
Merge pull request #3090 from Guozhanxin/usb_uac
...
添加 USB Audio Class
2019-09-20 06:30:33 +08:00
ade78fb12c
Merge pull request #3083 from tyustli/h743
...
add stm32h743-st-nucleo bsp
2019-09-20 06:30:11 +08:00
0a42780edb
Merge pull request #3089 from enkiller/pr1
...
[libcpu][arm] 修复因提前返回,导致sp指针不对称问题
2019-09-20 06:26:58 +08:00
71346926c4
Merge pull request #3078 from enkiller/pr
...
[kernel][ipc] add send wait support for message queue
2019-09-20 06:26:27 +08:00
7f8642e75c
Merge pull request #3080 from gavin-liugang/master
...
imxrt: Update for imxrt UART, SDRAM, ENET, PHY modules
2019-09-20 06:25:44 +08:00
711ce4a0ea
[usbd] Fixed Windows first recording failure.|修复windows下第一次录音失败的问题。
...
windows下第一次录放音失败的原因是：第一录放音时 windows 会先连续发送开始、结束检测设备，然后才正式开始。线程来不及处理两次开始事件不会累积，最后导致直接结束，
2019-09-19 23:12:24 +08:00
dc5943d573
Merge pull request #3081 from gbcwbz/atk-f767-lcd
...
[bsp][stm32][stm32f767-atk-apollo] Add LCD driver port
2019-09-19 22:42:12 +08:00
98b1956937
[usbd] Add usb audio class.
2019-09-19 21:01:25 +08:00
cde81a296d
[usbd] Fixed an error where change the interface did not call handler.|修正了改变接口不调用回调的问题
2019-09-19 20:58:58 +08:00
8316646b85
[libcpu][arm] 修复因提前返回,导致sp指针不对称问题
2019-09-19 18:27:07 +08:00
cfb6e59941
[bsp][stm32][stm32f767-atk-apollo] Fix missing lcd_port.h error
2019-09-19 11:44:17 +08:00
943f83d58f
imxrt:enet: Support imxrt ethernet interface
...
1. Add "drv_eth.c" for all imxrt platforms.
2. Add ksz8081 phy driver for imxrt1052-nxp-evk board.
3. Disable the LED demo in main.c file if enable the ENET
and ksz8081 phy, because the PINs of LED and ksz8081
reset are from the same GPIO.
4. Update the relevant Kconfig and Sconscript files.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:21:42 +08:00
5cabac6d9c
imxrt:app: Support ramfs for imxrt1052-nxp-evk
...
Add ramfs (8MB size) support for imxrt1052-nxp-evk board.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
57630ae4bd
imxrt:sdram: Add sdram support for imxrt1052-nxp-evk
...
1. Add sdram item in bsp/imxrt/imxrt1052-nxp-evk/board/Kconfig
2. Add sdram configuration header file for imxrt1052-nxp-evk
3. Update the sdram space assignment for memheap
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
259e9e4fc6
imxrt:board: Add LPUART3 item for imxrt1052-nxp-evk
...
Add LPUART3 item in imxrt1052-nxp-evk Kconfig file to support
Arduino UART interface.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
9791c31c1b
imxrt:uart: Add PINs init for each uart port
...
Add PINs init function based on the selected UART port.
In general, user should configure all necessary PINs based on
the specific imxrt board in:
bsp/imxrt/xxxx/board/MCUX_Config/pin_mux.c
There is a convenient GUI tool named MCUXpresso Config Tools,
it's free and can be obtained from NXP offical website. Open
the file:
bsp/imxrt/imxrt1052-nxp-evk/board/MCUX_Config/MCUX_Config.mex
with MCUXpresso Config Tools, set the necessary PINs (or clocks)
and generate the new code of pin_mux.c (or clock_config.c), the
project can get right configurations based on specific imxrt
board.
But, there is no relation between RT-Thread Kconfig and MCUXpresso
Config Tools. User selects one driver in RT-Thread menuconfig, then
the ping_mux.c should be udpated by MCUXpresso Config Tools to set
the right PIN configurations for the selected driver. It's clear
but a little complex.
We add the PIN init functions for some drivers in the board.c file,
1. It's convenient to usr a driver in RT-Thread. Just select the
driver, then the code will include all necessary parts, and the
driver can work well.
2. User can also configure the PINs with MCUXpresso Config Tools.
3. The drivers in bsp/imxrt/libraries/drivers are common for all
imxrt boards. They may have different PIN configurations based
on different hardware design. So we put the PIN init functions
in each board.c file following each different imxrt board.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
e4671d2916
[kernel][ipc] add send wait support for message queue
2019-09-19 10:10:02 +08:00
e3ba233dc0
add stm32h743-st-nucleo bsp
2019-09-18 10:11:13 +08:00
ae7a33c27c
Merge pull request #3077 from jesven/fix_mempool
...
修正rt_mp_free有可能唤醒一个错误任务指针的问题
2019-09-17 14:11:14 +08:00
b789721307
[bsp][stm32][stm32f767-atk-apollo] Add LCD driver port
2019-09-17 13:59:14 +08:00
770cc2ffeb
修改mempool使用rt_list_for_each宏进行遍历
2019-09-17 11:02:34 +08:00
bb014b2061
Merge pull request #3050 from ericQiang/master
...
bug fix: the value of timer auto reload should be (val-1)
2019-09-16 17:36:23 +08:00
6259e715d2
Merge pull request #3053 from willianchanlovegithub/WillianChan
...
[bsp][stm32][f796-disco]Add stm32f769-st-disco bsp
2019-09-16 17:35:57 +08:00
ae1fdc70f0
修正rt_mp_free有可能唤醒一个错误任务指针的问题
2019-09-16 16:55:40 +08:00
58aa6b792a
[bsp][stm32][templates/stm32f7xx]Fix the problem of indentation.
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-16 14:05:50 +08:00
c3293f4386
[bsp][stm32][f769-disco]Fix the problem of indentation.
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-16 13:49:10 +08:00
cb40e60273
Merge pull request #3072 from liruncong/EnvPath
...
[tools]修正外部环境变量未引入Env Path,导致自定义Builder的action参数使用python函数时,无法找到外部程序的问题
2019-09-16 08:49:30 +08:00
1b2a1263df
Merge pull request #3075 from liruncong/libc
...
[components/libc/compilers]c++文件引用libc.h支持
2019-09-16 08:47:49 +08:00
408bb22af6
[components/libc/compilers]撤销由VS编辑器在键入}后自动引起的缩进
2019-09-15 11:47:11 +08:00
91e1918250
Merge pull request #3071 from xfan1024/fix-stm32l0-exti-bug
...
Fix STM32L0 Series External Interrupt BUG
2019-09-15 09:38:54 +08:00
41753b2e7a
Merge pull request #3066 from zhangjun1996/master
...
[bsp][stm32][libraries]删除冲突的spi库文件，修正stm32f1系列的uuid读取函数
2019-09-15 09:38:19 +08:00
20d9ac459e
Merge pull request #3054 from a1012112796/writing_zzc_add_bsp_robomaster_a
...
[bsp][stm32] 更新stm32f427-robomaster-a外设驱动配置
2019-09-15 09:37:47 +08:00
6db1bd4516
Merge pull request #3062 from yangjie11/yj_kconfig_com
...
[bsp]解除组件初始化与使用user main的依赖，并修改相应的 Kconfig
2019-09-15 09:35:42 +08:00
6e0369b1fe
Merge pull request #3065 from balanceTWK/master_HEAP_BEGIN
...
[bsp][stm32] fix : #define HEAP_BEGIN
2019-09-15 09:34:57 +08:00
00c2e46d5b
Merge pull request #3067 from Lawlieta/develop
...
[net][netdev] fix IMEI spell mistake in ifconfig command
2019-09-15 09:34:25 +08:00
f827df0e51
Merge pull request #3073 from liruncong/armclang
...
[tools]armclang库文件编译支持
2019-09-15 09:32:26 +08:00
d7addb66e0
Merge pull request #3074 from liruncong/utest
...
[components/utilities/utest]修正无测试用例时,执行utest_run时跑飞问题. utest_init增加__…
2019-09-15 09:31:24 +08:00
d76d30cf50
[components/libc/compilers]c++文件引用libc.h支持
2019-09-14 22:52:06 +08:00
Bernard Xiong
MurphyZhao
armink
a1012112796
流光
guozhanxin
tangyuxin
gbcwbz
Gavin Liu
tyustli
shaojinchun
Willian Chan
liruncong