guozhanxin
711ce4a0ea
[usbd] Fixed Windows first recording failure.|修复windows下第一次录音失败的问题。
...
windows下第一次录放音失败的原因是:第一录放音时 windows 会先连续发送开始、结束检测设备,然后才正式开始。线程来不及处理两次开始事件不会累积,最后导致直接结束,
2019-09-19 23:12:24 +08:00
guozhanxin
98b1956937
[usbd] Add usb audio class.
2019-09-19 21:01:25 +08:00
guozhanxin
cde81a296d
[usbd] Fixed an error where change the interface did not call handler.|修正了改变接口不调用回调的问题
2019-09-19 20:58:58 +08:00
guozhanxin
59dfbb1266
[usb device] Fix the problem of multiple altsetting of interface failing to properly enumerate.
...
修复多备用设备的接口不能正常枚举的问题。
2019-09-12 18:04:44 +08:00
Zhou Yanjie
3c9375181d
usb: hid.c: 修复编译过程中的错误/Fix compile-time error.
...
在第375行中,“uint8_t *data,”应改为“rt_uint8_t *data,”。
In line 375, "uint8_t *data," should be changed to "rt_uint8_t *data,".
Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 16:03:57 +08:00
tyustli
d8eb0cfc1e
fix kernel and framework no cast type error
2019-06-18 20:09:19 +08:00
ZYH
e1517a0981
[Components][USB][RNDIS] fix delay linkup using soft timer
2019-06-11 15:32:37 +08:00
ZYH
2a738e1ee2
[Components][USB][ECM] fix hotplug
2019-06-11 15:27:11 +08:00
ZYH
c12d59dc02
[Components][USB][RNDIS] fix hotplug
2019-06-11 15:24:21 +08:00
ZYH
7a75e449b6
[Components][USB][ECM] fix hotplug
2019-06-10 14:10:59 +08:00
ZYH
cc9ce52bae
[Components][USB][RNDIS] fix hotplug and "delay linkup"
2019-06-10 14:10:08 +08:00
weety
5293175998
Fixed data loss issue when USB CDC serial works in dma transmission mode.
2019-02-03 20:36:34 +08:00
zyh
b18534e1af
[components][USB][Device][Core]fix the device_qualifier error respond on fullspeed
2018-12-27 16:48:29 +08:00
Peter Zhang
328a697c1d
[components][drivers][usb][usb_device][cdc_vcom]: Add 'RT_VCOM_TX_TIMEOUT' to configure TX_TIMEOUT whick may block vcom tx thread for a long time. Add 'RT_VCOM_TASK_STK_SIZE', 'RT_VCOM_TX_USE_DMA', 'RT_VCOM_SERNO', 'RT_VCOM_SER_LEN', 'RT_VCOM_TX_TIMEOUT' to Kconfig
2018-10-26 14:29:22 +08:00
Bernard Xiong
95fde46d18
Merge pull request #1923 from uestczyh222/usb
...
[Components][drivers][usb]修复非对齐访问异常
2018-10-26 07:08:24 +08:00
liruncong
d3764db892
解决以下问题:
...
1) usb驱动中时间未与RT_TICK_PER_SECOND关联问题,RT_TICK_PER_SECOND变化时,这些时间将发生变化
解决: 增加USB_TIMEOUT_BASIC/USB_TIMEOUT_LONG/USB_DEBOUNCE_TIME
2) 修正rt_usbh_detach_instance函数使用device->cfg_desc前未判断是否有效. 可导致abort
3) rt_usbh_hub_port_change增加device->port初始化,否则struct uhcd_ops相关函数无法直接得到端口号
2018-10-23 20:04:51 +08:00
zyh
c2539db38e
[Components][drivers][usb]修复非对齐访问异常
2018-10-22 12:08:43 +08:00
Bernard Xiong
2c0640a178
[license] Change license to Apache.
2018-10-14 19:37:18 +08:00
Bernard Xiong
65fc7421e0
Merge pull request #1871 from uestczyh222/master
...
[Components][USB]增加健壮性
2018-10-09 19:54:10 +08:00
ZYH
2b7488ca85
[Components][USB]更新license
2018-10-09 11:43:35 +08:00
ZYH
f73e4c3fc4
[Compoments][USB]增加对class的非法注册的判断
2018-10-09 11:41:38 +08:00
ZYH
294223c80b
[Components][USB]修复当未开启复合设备时HID编译失败
2018-10-09 11:32:41 +08:00
liruncong
7b788014f7
修正drivers下,armclang编译时的警告或错误 注:vcom_tx_thread_entry下, if(!res & CDC_TX_HAS_DATE)应为bug.
2018-09-10 19:40:08 +08:00
liruncong
d3c08afd75
1. 保留目前未用到的rt_usbd_ep_unassign函数,暂时移除static属性,消除警告.
...
2. 修改一处存在多余括号问题. armclang有警告发出.
2018-09-02 22:39:51 +08:00
liruncong
923d6fe33d
消除usb结构体gcc编译时的相关警告
2018-08-28 03:18:39 +08:00
zyh
151330b721
[Components][USB][Device]Support customer HID class|支持自定义HID设备
2018-07-04 14:13:09 +08:00
Bernard Xiong
884fb70fe9
[Kernel] Add device ops feature.
2018-06-10 17:59:17 +08:00
zyh
178fce54bd
[Components][USB]fix device ep write 1bytes on hs
2018-05-28 11:04:49 +08:00
zyh
c053119fac
[Components][HOST]fix sem name
2018-04-27 15:27:26 +08:00
zyh
1ed770039c
[Coponents][USB device]add class register interface
2018-04-24 12:48:05 +08:00
ZYH
0fcf08ae88
[Components][USB]fix a compile error
2018-03-23 14:52:00 +08:00
ZYH
7262ab7364
[Components][USB Device]增加复合设备对HS的支持
2018-03-16 18:40:07 +08:00
ZYH
5035662cd9
[Components][USB Device]各个class对HS进行了适配
...
部分class还不支持HS,RNDIS存在暂时无法解决的已知bug
2018-03-16 18:36:14 +08:00
ZYH
0ab93e70f0
[Components][USB Device]增加协议栈对HS设备的支持
...
- 增加winusb对HS的支持。其余class还在完善中
2018-03-16 16:02:57 +08:00
charlown
4f1f0ad918
fix cdc_vcom.c notify receive data.
2018-03-15 10:07:23 +08:00
uestczyh222
55a1c11abc
[Components][WINUSB]Add Guid config to Kconfig Add VID PID config
2018-03-09 15:21:33 +08:00
ChunfengMu
a499c18072
[Components][Drivers][USB]vcom dma_tx模式下根据bulk in提交能力限制tx_ringbuffer的填充长度,避免对下次bulk in传输造成影响.
2018-02-06 01:49:59 +08:00
ChunfengMu
9798917638
1:解决主机端未打开串口时,设备端应用程序dma模式下操作vcom发送数据时,dataqueue条目泄漏的问题。
2018-01-31 02:37:34 +08:00
ChunfengMu
263e9faae4
Update cdc_vcom.c
2018-01-30 10:19:40 +08:00
ChunfengMu
2ea318cc03
1:解决未使用串口设备时,bulkout端点接收数据触发断言的问题。
2018-01-30 01:24:00 +08:00
ChunfengMu
0b0cbaf9aa
[Components][Drivers][USB]fix compiling errors
2018-01-24 00:27:11 +08:00
Bernard Xiong
828804e26d
Merge pull request #1184 from uestczyh222/master
...
[Components][Drivers][USB Device]fix ep assign bug
2018-01-22 15:43:10 +08:00
Aubr.Cool
537943ed6f
[Components] driver usb vcom fix error for console ( #1160 )
...
* [Components] driver usb vcom fix error for console
2018-01-22 13:18:27 +08:00
uestczyh222
8b1eedf73e
Merge remote-tracking branch 'upstream/master'
2018-01-22 13:13:23 +08:00
uestczyh222
4ca2337176
[Components][Drivers][USB Device]fix ep assign bug
2018-01-22 12:58:59 +08:00
ChunfengMu
31dcce45c8
1:修复cdc_vcom命令处理错误,SetLineCoding命令用于设置一些vcom参数,在此处判定vcom连接状态不合适,因通过SetControlLineState命令wValue字段最低位进行判断。
2018-01-19 01:24:33 +08:00
ZYH
a9f182140c
[Components][Drivers][USB]fix memory leak
...
修复一个 bug 该bug曾导致在设备不断电但主机重新枚举设备的情况下会导致内存泄漏并无法接收数据
2018-01-17 21:12:21 +08:00
ZYH
92f5b437f7
[USB Device]fix an error on msc
2017-12-21 21:26:40 +08:00
uestczyh222
9b44af941f
[Components][Drivers][USB HOST]Fix core stack and msc driver
...
可以挂U盘了 欢迎测试鲁棒性已打通F4全系列HOST驱动(OTGFS)
2017-12-14 22:45:12 +08:00
uestczyh222
18d42fe077
[Components][USBHOST]Core OK
2017-12-14 03:14:44 +08:00
uestczyh222
b42fc96408
[host first]
2017-12-13 15:58:11 +08:00
uestczyh222
049ed5047f
[Components][USB][DFS][usb minimize stack size dfs fix build error
...
without finsh]
2017-12-07 07:24:37 +08:00
uestczyh222
f3a96e2073
[Components][Deivers][USB][HID]fix bug and add send callback
2017-12-04 01:58:59 +08:00
MiraculousConch
1462ba178d
[Components][Drivers][USB Device][WinUSB]update winusb class
2017-12-03 01:32:07 +08:00
MiraculousConch
b5e8fa0872
[Components][Drivers][USB]Add IAD support for MSC class
2017-11-29 18:33:09 +08:00
MiraculousConch
e875128115
[Components][Driver][USB][Class]fix msc class
2017-11-29 14:26:15 +08:00
MiraculousConch
c64fa9f059
[Components][Drivers][USB][Core]fix io request
2017-11-29 14:25:45 +08:00
MiraculousConch
d40d5355b8
[Components][Drivers][USB]WinUSB And Core update
...
协议栈增加允许class在windows环境下枚举时向系统注册附加属性。并在winusb class中提供范例(注册GUID信息)
2017-11-28 03:02:48 +08:00
uestczyh222
f4fb716167
[Components][USB][Class and
...
Core]修复了协议栈在ep0请求大于端点描述最大包时无法正确读取的bug
增加了rndis class LWIP on USB
2017-11-25 17:31:48 +08:00
uestczyh222
cfc0304be5
[Compinents][USB]增加USB协议栈对微软OS描述符的支持,修复HID class的IAD接口,增加免驱新class WinUSB
2017-11-23 00:38:56 +08:00
uestczyh222
bd566e6a37
[Components][Drivers][USB] Add CDC-ECM class (LWIP on USB)
...
Windows下没驱动 linux和mac下免驱
2017-11-21 22:44:13 +08:00
Bernard Xiong
af2b9b9965
[DeviceDrivers][USB Stack] code cleanup
2017-11-18 17:13:46 +08:00
uestczyh222
e365ff5473
[Components][Drivers][USB][HID]Update to common hid
2017-11-16 19:05:17 +08:00
uestczyh222
a3808362ac
[Components][Drivers][USB]fix usb device core
2017-11-15 20:54:54 +08:00
tangyuxin
cc54e0a74e
[usb]update usb stack
2017-11-11 10:53:08 +08:00
Bernard Xiong
767c16d596
[USBH] fix the spelling wrong
2015-03-19 08:52:28 +00:00
shaolin
64a2902fa9
1. Fix some spell error;
...
2. Fix data transfer size calculate error issue;
2014-07-13 17:19:34 +08:00
weety
d5b0c94552
[USB]fix rt_usbd_set_config() BUG which set the USB device to configuration state before enumerating the device.
2014-04-06 21:02:23 +08:00
shaolin
0fb9c54efd
1.replace API prefix usb* with usbh* in USB host stack to distinct with USB device stack;
...
2.adjust some viable and micro name
3.some other small fix
2014-03-04 08:59:53 +08:00
shaolin
8fd0a7f9c6
Update USB Device Stack to support more device controllers;
...
Pass USB CV test verification;
Code cleanup;
2014-02-16 17:42:35 +08:00
Grissiom
981d929b56
ringbuffer: fix the ambiguous name
...
RT_RINGBUFFER_SIZE could mean "the size of the whole buffer", "the size
of the empty space" or "the size of the data". Moreover, it's never a
micro anymore. Change it to rt_ringbuffer_data_len before it's too late.
Also, RT_RINGBUFFER_EMPTY is changed to rt_ringbuffer_space_len.
2013-08-19 14:12:35 +08:00
bernard
a124e7bd22
add initialization debug code
2013-07-24 07:33:48 +08:00
yiyue.fang
03cf76e7ef
reformat the coding style in usbdevice/core/core.c
2013-06-29 10:32:27 +08:00
yiyue.fang
621fbdb90c
Embedded GPLv2 license in drivers
2013-06-28 00:36:54 +08:00
Bernard Xiong
98c8a23e94
Add component initialization.
2013-06-23 07:48:42 +08:00
heyuanjie87
02869d7e67
udisk can be eject
2013-06-15 23:02:50 +08:00
Grissiom
b02993c989
usbdevice/core: cope with some buggy drivers on USB_MSG_DATA_NOTIFY
...
Some driver will emit USB_MSG_DATA_NOTIFY before the USB get configured.
Filter out those events.
2013-06-11 11:50:05 +08:00
Grissiom
ed19483cb4
usb: add USB_MSG_PLUG_OUT event
...
When the core received an USB_MSG_PLUG_OUT event, it will stop all the
classes. This make a chance that the classes could get rid off doing
useless stuff while the USB cable is plugged out.
2013-06-06 15:21:40 +08:00
heyuanjie87
376a08d89a
return correct length of LangID string to host
2013-05-30 18:26:52 +08:00
qiuyiuestc
a33e992724
Merge pull request #95 from grissiom/vcom
...
usbdevice/core: add reset function to support hotplug
2013-05-25 01:05:00 -07:00
qiuyiuestc
97a507e667
usbdevice/core: add reset function to support hotplug
...
When the USB got RESET packet from the host and the address is setup,
all the classes will got reset. The reset is done by class stop and than
class run. So the classes should reset their internal state in
class_{run,stop}.
Besides, the USB device driver could post a USB_MSG_RESET message on
every RESET packet.
2013-05-25 15:55:27 +08:00
qiuyiuestc
2e25159a83
Merge pull request #94 from grissiom/vcom
...
cdc_vcom: reset the vcom state in proper cases
2013-05-25 00:52:05 -07:00
Grissiom
046182be94
cdc_vcom: reset the vcom state in proper cases
...
Reset the vcom state in class_{run,stop} and when the PC is not
receiving data from me.
2013-05-25 15:25:32 +08:00
heyuanjie87
8aa4eb7924
make Host can halt endpoints
2013-05-23 12:33:22 +08:00
heyuanjie87
8b4aadb4db
add usb state
2013-05-17 20:53:05 +08:00
Grissiom
b3e38f53b4
usbdevice/core: use static message queue
...
Although currently the only message send to the queue is struct
udev_msg, in order to keep backward compacity and for extention in the
future, we set the size of message to 32.
2013-05-12 15:43:30 +08:00
Grissiom
f0d50a7b36
usbdevice/core: use static thread instead of dynamic thread
...
It also add two configurations for the USB device even loop thread:
RT_USBD_THREAD_STACK_SZ to set the stack size, default to 2048
RT_USBD_THREAD_PRIO to set the priority, default to 8
You can overwrite the default values in rtconfig.h
2013-05-12 15:43:29 +08:00
Grissiom
aa179e4438
cdc_vcom: not to start sending data when the data is already sending
...
We start the sending transaction in SOF handler. But if the data is
already sending, start an other transaction will cause data lose.
Implement a state machine is cdc_vcom and avoid that.
2013-05-12 13:27:13 +08:00
Grissiom
157af94af9
usbdevice/core: small optimization on the event loop
...
Sort the switch cases by the frequency of the events.
2013-05-12 13:07:03 +08:00
Grissiom
d23ee75d2e
cdc_vcom: send data as many as possible
...
The data filled into dcd_ep_write does not to be limited by
MaxPacketSize.
2013-05-10 17:50:07 +08:00
Grissiom
5de59429fe
usbdevice/core: misc cleanup
2013-05-10 17:35:33 +08:00
Grissiom
ffb1e62020
cdc_vcom: send a zero-length-packet at the end is transaction
2013-05-10 15:17:59 +08:00
Grissiom
778c4239b1
cdc_vcom: fix the bug that use ringbuffer pool as usb packet buffer
...
This commit set the buffer for packet to CDC_MaxPacketSize which is a
reasonable value for it. However, maybe we should make
CDC_{RX,TX}_BUFSIZE configurable as well.
2013-05-09 23:18:58 +08:00
Grissiom
d196a75a41
usbdevice/core/core.c: fix garbage value bug
...
This could crash the program with -O1 and -O2 in MDK.
2013-05-04 18:34:13 +08:00
heyuanjie87
34d531578e
class driver can custom string description
2013-01-24 20:59:43 +08:00
heyuanjie87
7ce0547575
fixed the string descriptor send to host more than actual
2013-01-17 14:03:45 +08:00
heyuanjie87
a3bde3c4a3
handle standard request to interface that defined in class
2013-01-17 12:23:06 +08:00
heyuanjie87
7b2929303e
revert some define to usb_common.h
2013-01-11 00:02:40 +08:00
heyuanjie87
d84fde4e54
revert the define
2013-01-09 18:56:31 +08:00
heyuanjie87
928cabff50
allows the user custom PID and VID
2013-01-09 18:07:59 +08:00