b47b6df927
[bsp][Infineon]&[NXP] Add README_EN
2024-07-08 22:06:53 +08:00
b171877139
[bsp][qemu]修复qemu-a9使能lcd缺失依赖问题.
2024-07-07 22:24:09 +08:00
776764c4d6
[bsp/cvitek/eth]解决编译警告
2024-07-04 00:33:32 +08:00
5f70f974d5
[bsp][stm32]Increase the serial_v1 tx timeout.
2024-07-04 00:33:06 +08:00
017c31a062
[bsp/cvitek]解决eth编译报错
2024-07-02 22:54:58 +08:00
8487e774a3
[bsp][stm32]fix stm32h7 spi transmit fail probelm.
2024-07-02 22:54:23 +08:00
1e3efd4937
[rtduino][pico] update README.md
2024-06-30 22:30:15 +08:00
cc853de5f3
Update cherryusb to v1.3.1 ( #9122 )
...
* fix(hpmicro): remove duplicate usb variable
* update(cherryusb): update to v1.3.1
2024-06-30 08:01:51 +08:00
df715100f2
[BSP][HC32]add lckfb-hc32f4a0-lqfp100 ( #9119 )
...
* -以ev_hc32f4a0_lqfp176为模板进行修改
* -修改对应引脚
* -更新readme
* -update readme
* -添加 lckfb-hc32f4a0-lqfp100
2024-06-28 23:41:31 +08:00
099e24951c
[BSP][nxp]增加wifi_weather_sample.c ( #9118 )
...
* [BSP][nxp]增加wifi_weather_sample.c
* [BSP][nsp]增加wifi_weather_sample.c
2024-06-28 22:37:22 +08:00
840eef1124
[bsp][nxp] Delete mcxn947 sdk unused path.
2024-06-27 23:04:56 +08:00
e69a7ccfa3
[bsp][nxp] Update mcxn236 & mcxn947 LFLAGS config.
2024-06-27 23:04:56 +08:00
76e123d8ca
[bsp/stm32f407-lckfb-skystar] 天空星高配版的FLASH从GD25Q32升级为W25Q128 ( #9108 )
...
* -更新芯片型号和板子型号
* -天空星目前只有青春版（没有贴外部flash），高配版（有贴外部flash）正在生产，所贴的SPI FLASH 从GD25Q32升级为W25Q128。
2024-06-27 23:04:35 +08:00
6ea7466d89
[file]modify a9/launch.json
2024-06-27 23:03:54 +08:00
eb1d6913b0
[bsp/stm32f103-100ask-mini] extend ROM from 64KB to 128KB
2024-06-27 00:11:18 +08:00
d342450594
[bsp][stm32][uart V1]优化驱动实现
...
* 增加putc超时处理机制,防止死循环
* 优化TX中断初始化与卸载
* 添加TX中断方式实现
2024-06-27 00:11:18 +08:00
7523f40701
[bsp][nxp][frdm-mcxn236] remove sdio and eth
...
there's no sdio/eth in HW, remove it
2024-06-26 23:54:42 +08:00
63578802b9
[bsp][nxp][frdm-mcxn236] fix SW btn
...
This is the SW2 button, a.k.a wakeup button on the board. Another
choice is SW3 a.k.a ISP button which is connected to P0_6.
2024-06-26 23:54:42 +08:00
0f8f0620c3
[bsp][nxp] s/libraries/Libraries
...
The upper/lower case matters under *nix
2024-06-26 23:54:42 +08:00
071b3d9244
[bsp]: fix bugs of cvitek and pico drivers
2024-06-26 20:28:29 +08:00
bc3afab2c9
[bsp][stm32]Optimize ADCs and fix some bugs
2024-06-26 20:26:52 +08:00
f687ace6ef
bsp/cvitek update readme
2024-06-26 20:22:05 +08:00
4d00fd19da
[bsp][nxp mcxn236]Delete unused code with pin_mux.c .
2024-06-26 17:25:18 +08:00
b785ef9ed7
[libcpu][aarch64]memory setup using memblock ( #9092 )
...
* memory setup using memblock
* map pages later
2024-06-26 14:36:49 +08:00
e390290482
[bsp/mcxn236]Port gcc&mdk project.
2024-06-26 01:22:15 +08:00
7ae476dcf2
[bsp/Cvitek]去除shell脚本中的'\r' ( #9097 )
...
* [bsp/cvitek]去除脚本中'\r'
* [bsp/cvitek]删除脚本中的'\r'
* Update combine-fip.sh
2024-06-26 01:21:18 +08:00
8524781cb3
[bsp][mcxn236] Add software i2c driver.
2024-06-26 01:20:59 +08:00
053373c3ac
adapter frdm-mcxn236 iar project ( #9083 )
...
* adapter frdm-mcxn236 iar project
* formate MCXN236 bsp
2024-06-25 01:33:30 +08:00
189f5ed8a9
[chip flash] add drv_flash_l1.c for stm32l1xxx ( #9077 )
...
* [chip flash] add drv_flash_l1.c for stm32l1xxx
* [fix] Modified the SConscript file to support building for STM32L1xxx.
2024-06-25 01:29:36 +08:00
5e04d8b3c1
[bsp]Fix the problem of stm32l431 build ci failure
2024-06-24 13:53:10 +08:00
0f9a4fa032
fixup: building failure in bsp cause by hal ( #9086 )
...
fixup: hal
2024-06-23 21:28:26 +08:00
af5bd68c58
野火启明6m5驱动完善
2024-06-20 21:42:11 +08:00
f0e6d772f3
mkdist和sdk_dist支持kconfiglib语法
2024-06-20 14:40:42 +08:00
fe3c4d456e
bsp中option env语句替换为新语句，并同步更新了source "$xxx"语句
2024-06-20 14:40:42 +08:00
6bd6317f77
[ht32][drv]新增adc、wdt、soft_i2c驱动
2024-06-19 23:00:12 +08:00
65c9947225
[libcpu] rv64: support for ARCH_REMAP_KERNEL ( #9067 )
...
* [libcpu] support for ARCH_REMAP_KERNEL
These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.
Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
updates to early page table setup and address relocation logic.
These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.
Signed-off-by: Shell <smokewood@qq.com>
* fixup: CI run failed
* bsp: default config without using smart
* fixup: static checks
* restore rt_hw_mmu_kernel_map_init for D1
---------
Signed-off-by: Shell <smokewood@qq.com>
2024-06-18 11:15:59 +08:00
842b555358
[bsp/phytium]c++支持，gpio，qspi驱动修改 ( #9059 )
...
* GPIO驱动与QSPI驱动适配
* C++支持
* update
---------
Co-authored-by: 张衍 <zhangyan1491@phytium.com.cn>
2024-06-16 15:42:37 +08:00
58e42caea7
【修改】修改imx6ull-smart中mnt.c的逻辑错误 ( #9045 )
...
* Update mnt.c
* Update mnt.c
* Update mnt.c
* Add files via upload
* Update mnt.c
* Update mnt.c
2024-06-13 08:51:57 +08:00
47ee23510c
[BSP] HC32F460 在 SConscript 补充几个源文件 ( #9042 )
...
[BSP] HC32F460 工程中增加几个源文件
2024-06-10 16:15:04 +08:00
fe950fd1c2
[fixed]qemu-vexpress-a9/drv_smc911x.c没有包含相应的头文件 ( #9040 )
...
Update drv_smc911x.c
代码中用到udelay和mdelay函数，但是没有包含头文件
2024-06-07 21:38:16 +08:00
f778a66d6e
[bsp/qemu-riscv]修正打开串口后中断被关闭的问题 ( #9035 )
2024-06-05 09:52:32 +08:00
ca78a4f025
[bsp][hpmicro] remove invalid reference in board KConfig
...
- removed invalid reference in board KConfig
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
2024-06-04 11:11:58 +08:00
e03342ff6b
[bsp][hpmicro] add HPM5300EVK,HPM5301EVKLITE and HPM6800EVK support & update hpm_sdk
...
- added new boards: hpm5300evk, hpm5301evklite and hpm6800evk
- upgaded hpm_sdk
- driver updates and bugfixes
- add hpmicro BSPs to CI
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
2024-06-03 18:05:20 +08:00
62d321caa0
refactor(drivers/usb):replace rtt usb stack with cherryusb ( #8799 )
2024-06-02 11:20:13 +08:00
aa81fd4a88
[bsp][pico] update README.md ( #9018 )
2024-05-31 17:34:56 +08:00
2fcf151a8e
[components][drivers][include][phy] add one more parameter for mulitiple phys
...
- add parameter phy to specify multiple-phy instance
Signed-off-by: Jiading Xu <Jiading.Xu@hpmicro.com>
2024-05-29 22:22:51 +08:00
2fd9ff56dc
[BSP][stm32f103-100ask-pro]add ext_sram driver to stm32f103-100ask-pro
2024-05-29 20:19:46 +08:00
07d7b71345
code format adjustment
2024-05-29 20:18:18 +08:00
b764055018
xmac port code update
2024-05-29 20:18:18 +08:00
7d7a53ebc1
aarch32 config update tcp pri 12->16
2024-05-29 20:18:18 +08:00
e2c98c9e63
aarch64 config update tcp pri 12->16
2024-05-29 20:18:18 +08:00
6dc3d7f968
aarch32 menuconfig all update
2024-05-29 20:18:18 +08:00
65b5735178
ping test e2000d pass
2024-05-29 20:18:18 +08:00
214f187821
gpio disabled
2024-05-29 20:18:18 +08:00
601b29967a
aarch64 config update all
2024-05-29 20:18:18 +08:00
3172d37db7
[BSP][Infineon]Change Readme
2024-05-28 16:39:16 +08:00
ae6a3287e6
Add psoc62、61 config.
2024-05-27 21:20:13 +08:00
b65b922f6c
Adjust the PKG selection position.
2024-05-27 21:20:13 +08:00
0d2d5e88c7
Format some file
2024-05-27 21:20:13 +08:00
3d6b978ba9
Format some File
2024-05-27 21:20:13 +08:00
4b6a60bf1e
Add XMC7200 BSP And Make the HAL library as a software package
2024-05-27 21:20:13 +08:00
09a0e4c5f8
update gpio driver
2024-05-27 11:26:09 +08:00
5dd3b7427a
Accumulated patchsets for bsp/cvitek ( #8968 )
...
* bsp: cvitek: kconfig: add wdt for cv18xx_riscv
Add Watchdog timer in Kconfig.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* drv: cvitek: remove using macro from source file
Building of source file should be controlled by SConscript,
but not in source file itself.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp: cvitek: kconfig: add i2c for cv18xx_riscv
Add I2C in Kconfig for c906B.
Note, the IRQ# is different from that of c906L.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp: cvitek: kconfig: add rtc for cv18xx_riscv
Add RTC in Kconfig for c906B.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp: cvitek: fix channel issue for pwm driver
The original code confuses the concepts of controllers and channels.
Fixed it and do some code cleanup.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp:cvitek: add i2c pinmux config for cv18xx_riscv
Pinmux in driver code is controlled by SOC type, bcos driver
code should be general and support all pins defined by SoC.
Pinmux configuration in Kconfig is controlled by BOARD type,
bcos when we operate on board, it does not expose all chip-level
pin signals and we can only use part of them.
Following is I2C signals exported by duo family. Details see
https://milkv.io/docs/duo/overview .
Note: we have not added support for duo-S.
Duo
===
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL
GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo 256m
========
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL
GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo S
=====
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL
J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL
J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA
J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL
J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL
J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA
J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA
J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL
J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL
J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA
J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: flyingcys <flyingcys@163.com>
* bsp:cvitek: remove using macro from source file for i2c
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp:cvitek: unify menu message text for i2c as other drivers
Other dirvers has no extra word "HW".
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* bsp:cvitek: add i2c pinmux config for c906_little
Porting what we have done in commit "bsp:cvitek: add i2c pinmux config
for cv18xx_riscv" to c906_little.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
---------
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: flyingcys <flyingcys@163.com>
Co-authored-by: flyingcys <flyingcys@163.com>
2024-05-22 08:19:07 +08:00
2f559906d6
✨ feat(bsp): hc32L196增加IAR_8.40支持
...
Signed-off-by: 蒙蒙plus <chengmeng_2@outlook.com>
2024-05-17 18:38:05 -04:00
3d30b56c86
[HC32] Fixed a bug about erase flash.
2024-05-16 19:15:38 -04:00
194fd6df05
[bsp/at32] 1.fixed f402 uart7/8 pierph clock source error, 2.fixed compiling error of drv_usart_v2.c with no dma
2024-05-16 19:15:17 -04:00
e46333496f
fix specified network card not taking effect with msh's ping error ( #8937 )
...
* fix specified network card not taking effect with msh's ping error
* fix specified network card not taking effect with msh's ping error
2024-05-16 15:43:50 +08:00
ec8ff90a4a
[bsp/cvitek]update gpio driver ( #8946 )
...
update gpio driver
2024-05-13 18:20:57 -04:00
b3277fa704
fix eth error ( #8929 )
...
* fix eth error
* fix eth error
* fix eth error
* fix eth error
* fix eth error
2024-05-11 11:10:53 +08:00
5712ff1a32
[renesas][hmi-board]update lvgl config and doc.
2024-05-09 14:44:58 +08:00
1cac9e92b5
Stm32F411 Blackpill CubeMX delete SPI_NSS
2024-05-09 00:37:10 -04:00
95f0b029b0
[BSP][HC32F460]清理已不再使用的文件
...
PWM 配置文件 pwm_tmra_config.h 已合并到 pwm_tmr_config.h 了。
2024-05-08 18:09:17 -04:00
5f077a6df0
[bsp][at32]修复at32_transmit返回类型错误
2024-05-08 18:08:59 -04:00
dbf8a26e6c
[libcpu][aarch64] Fixed the rt_hw_secondary_cpu_bsp_start() bug ( #8898 )
...
* fix rt_hw_secondary_cpu_bsp_start() bug
* timer init
* comment
2024-05-08 19:48:17 +08:00
a723014e32
[renesas][hmi-board]Support lvgl-9.x
2024-05-07 21:43:52 -04:00
7245dbd54f
修改scons的脚本文件，使其适配更多芯片的工程生成
2024-05-07 02:03:28 -04:00
84f8d209c4
[stm32l4] export env
2024-05-07 13:27:15 +08:00
12ad1703df
[bsp][stm32l4] remove local HAL
2024-05-06 21:42:10 +08:00
ac45676830
[stm32l4] select PKG_USING_STM32L4_HAL_DRIVER
2024-05-06 21:42:10 +08:00
b29b29b205
[stm32l4] remove HAL
2024-05-06 21:42:10 +08:00
0db3cfacda
[stm32l4] remove STM32L4xx_HAL/CMSIS
2024-05-06 21:42:10 +08:00
89164b19a8
fix art-pi smart boot from emmc ( #8904 )
...
* fix art-pi smart boot from emmc
* fix art-pi smart boot from emmc
* fix art-pi smart boot from emmc
2024-05-06 13:31:17 +08:00
a7a8c59ea9
[stm32l475pandora] format Kconfig
2024-05-05 22:18:34 -04:00
68e92985c7
[stm32] 调整CMSIS-Core软件包宏
2024-05-05 22:18:34 -04:00
341ce50067
[stm32] format Kconfig
2024-05-05 22:18:34 -04:00
d78429eb8e
[stm32] i2c hard driver fixup：增加硬件I2C传输超时等待时间
...
问题：
在使用硬件 I2C 驱动进行音频模块 WM8978 配置时，发现连续 rt_i2c_transfer 进行 I2C 传输时发现，连续多次调用 rt_i2c_transfer 会出现丢包现象；溯源发现是每次使用 rt_i2c_transfer 传输2字节，传输频率过高导致底层 HAL_I2C_Master_Seq_Transmit_DMA 报错 HAL_BUSY；
现象：
rt_completion_wait超时等待完成之后，I2C仍处于HAL_I2C_STATE_BUSY_TX状态，且后续第二次运行至HAL_I2C_Master_Seq_Transmit_DMA时会直接返回HAL_BUSY，从而直接 goto out; 退出而不会再次进行超时等待；
* drv_hard_i2c.c: 修复325行缺失'}'语法错误;更改HAL_I2C_xx_Transimt_xx调用中目标设备地址值;i2c_hard_config.h: 添加STM32F系列芯片xx_DMA_CONFIG宏定义;
* 回溯I2C设备地址传参处(msg->addr<<1)修改；
* fixup: 增加硬件I2C传输延时，解决连续传输导致HAL_BUSY状态；
2024-05-04 12:51:27 -04:00
39e6b36bb0
[bsp][ch32v307]添加了适配RT-Thread的全速USB驱动
2024-05-04 01:02:47 -04:00
b632dc1aaf
[bsp][gd32] 修复串口驱动中由于可能的中断嵌套而导致RB索引异常的问题
2024-05-02 18:57:18 -04:00
c21ba6985d
Fix compiling eror in hpmicro bsp ( #8889 )
...
- added 'DEVICE' to rtconfig.py
- fixed compiling error cuased by change in interrupt_gcc.S
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
2024-04-30 20:11:47 +08:00
0ccc315bce
[bsp/at32] add support at32a403a/a423 series and fix driver issues(uart/dma)
2024-04-30 01:11:18 -04:00
f190cba0ab
[i2c] adjust the timing for I2C initialization
2024-04-29 20:46:12 -04:00
a92f971267
[spi] soft_spi_pin_init loop variable is initialized to 0
...
The loop variable in the function 'drv_soft_spi:xx_pin_init()' is initialized to 0.
2024-04-29 17:49:20 -04:00
2aa66b1b4e
[HC32] support HC32F472 & remove residual files
2024-04-29 17:48:47 -04:00
7890e2cb14
[bsp/cvitek]add eth driver
2024-04-29 17:47:50 -04:00
e548a99da4
[ci] set at_device package as strict mode
2024-04-29 10:56:05 +08:00
aee6048a53
[bsp/cvitek]update cvitek sdhci drvier ( #8874 )
...
update cvitek sdhci drvier
2024-04-28 23:07:42 +08:00
bc774190f2
enable poll ( #8867 )
...
config poll
2024-04-26 22:25:04 +08:00
7ca2ebc51a
[bsp][stm32] fix bugs of i2c hardware drivers
...
在STM32F429IGTx设备上使用硬件i2c驱动程序师遇到以下几个问题：
语法错误：drv_hard_i2c.c 行67、68中i2c_handle未正常替换过来，估计是上个版本对变量重命名后因为宏定义忽略了此处修改；
语法错误：drv_hard_i2c.c 行326中缺少一个"}"导致编译出错；
初始化i2c设备过程中对双地址选项进行设置时（i2c_handle->Init.OwnAddress2Masks = I2C_OA2_NOMASK），STM32F4系列SOC没有这个配置定义，于是我直接将双地址模式关闭了（i2c_handle->Init.DualAddressMode = I2C_DUALADDRESS_DISABLE）；
初始化i2c设备（DMA方式）过程中发现i2c_hard_config.h文件中未定义DMA通道配置；
主要补丁如下：
修复硬件i2c驱动代码中语法错误（drv_hard_i2c.c行67、68、326）；
关闭默认i2c双地址模式（drv_hard_i2c.c行75：I2C_DUALADDRESS_DISABLE）；
添加硬件i2c驱动配置文件DMA相关配置项，增加对SOC_SERIES_STM32F2、SOC_SERIES_STM32F4、SOC_SERIES_STM32F7系列芯片配置DMA_CHANNEL的适配
2024-04-24 01:42:03 -04:00
2c8c4ccc47
[bsp]support cvitek sdhci drvier ( #8849 )
...
support cvitek sdhci drvier
2024-04-24 05:40:22 +08:00
62544df564
[bsp][cvitek] Initialize the Milk-V Duo 256M using the device tree ( #8841 )
...
Initialize the board using the device tree
2024-04-23 23:09:45 +08:00
184bfb447b
[STM32][SPI-DMA]特定条件下接收错误
2024-04-22 21:15:38 -04:00
e50f064bda
[bsp][renesas]Link script adds finsh related sections. ( #8837 )
2024-04-22 11:55:45 +08:00
f13220d911
[bsp][cvitek] Milk-V Duo 256M Supports running ARM large core and RISCV small core
...
支持将rtthread.bin和dtb文件合成boot.sd文件，使用uboot直接通过bootcmd命令启动rtthread内核。
支持构建带有小核riscv程序的fip.bin文件，保证在运行arm大核的同时运行小核的riscv程序。
2024-04-21 09:52:47 -04:00
3ff2b08d82
[clang-format] 增加clang-format格式化配置，通过ide或者手动运行tools/run-clang-format.py进行代码自动格式化
2024-04-21 01:18:37 -04:00
299f6e8ece
[bsp][acm32]format utf-8
2024-04-21 01:18:37 -04:00
3f434feec9
[bsp][nxp] Add select BSP_USING_PIN for SPI and RW007 driver
2024-04-20 23:46:39 -04:00
d68e47eb25
[klibc] organize and renmae macros, and add CI check
2024-04-20 21:52:49 -04:00
8c4db32d04
fixup: debug
2024-04-19 21:30:12 -04:00
4ea463d83f
fix for art-pi smart
2024-04-19 18:17:20 +08:00
98204c249b
fix for art-pi smart
2024-04-19 18:17:20 +08:00
4de96450be
fix for art-pi smart
2024-04-19 18:17:20 +08:00
61fac62521
[bsp][renesas]fix ra6m3 can't use lcd problem.
2024-04-18 22:51:03 -04:00
cd77f988cd
[bsp][nxp]修改 drv_filesystem_spi_flash 驱动 ( #8811 )
...
Co-authored-by: yandld <1453363089@qq.com>
Co-authored-by: Meco Man <920369182@qq.com>
2024-04-18 21:00:49 -04:00
de32f35016
[bsp/phytium]部分设备驱动修改 ( #8794 )
...
* update
* 修改 SDIF 驱动，支持同时使用 TF 卡和 eMMC，更换飞腾派自启动镜像
* drivers debug
* update
* update
* update config
* update
* modify format
---------
Co-authored-by: 朱耿宇 <zhugengyu@phytium.com.cn>
2024-04-19 08:52:09 +08:00
6493b2356f
[bsp][cvitek] 修正PIN设备的控制宏
2024-04-18 20:34:02 -04:00
3f515f29c5
[bsp][renesas]Modify the mdk template project of ra8.
2024-04-18 20:32:47 -04:00
3c9b7b1f96
[bsp][renesas][stm32]Fix some bsp probelm in 5.1.x.
2024-04-18 20:32:47 -04:00
204c3253be
[bsp][driver][renesas] Unified Renesas SCI driver
2024-04-18 20:21:59 -04:00
9229aee1d7
[BSP][HT32]新增合泰ht32f52352和ht32f12366
2024-04-17 23:44:25 -04:00
a2bec29019
[bsp][nxp]增加了drv_filesystem_spi_flash驱动
2024-04-16 18:48:37 +08:00
bbac8e954d
[bsp][nxp]增加了drv_filesystem_spi_flash驱动
2024-04-16 18:48:37 +08:00
47d9c03937
update spi flash mount
2024-04-16 18:48:37 +08:00
a225d26a8a
[bsp][stm32f103-fire-arbitrary] fix missing header file
2024-04-16 01:39:30 -04:00
d10fb37c05
[bsp] revert delete of stm32f407-sparkfire RTduino pinout
2024-04-15 22:41:00 -04:00
9c359fd4c8
[bsp][cvitek] 在Milk-V Duo 256M开发板中支持ARM核运行RT-Thread标准版和Smart版内核 ( #8800 )
...
* Supports ARM core of Milk-V Duo 256M development board
* add fip.bin(arm)
2024-04-16 09:49:41 +08:00
1a8b8522f7
[BSP][STM32]add stm32f407-lckfb-skystar
2024-04-13 08:00:15 -04:00
c6d20e47ac
[bsp][renesas] Add HMI rw007 initialization configuration by default
2024-04-13 13:32:30 +08:00
e88bb51fb5
bsp/tm4c123: move i2c clk config to tm4c123_config.c
2024-04-12 19:02:49 -04:00
5e9257fcd1
bsp/tm4c123: add hardware i2c support
2024-04-12 19:02:49 -04:00
86f1a0d2b2
Improve renesas LCD driver.
2024-04-12 19:01:59 -04:00
5d64ea1ed6
[bsp][renesas]Fix ek-ra8d1 spi binding error problem.
2024-04-12 19:01:59 -04:00
dbce35ba2b
bsp/stm32: remove duplicate if condition
2024-04-12 19:01:26 -04:00
d5aff0c963
[bsp][nxp] 增加drv_spi_sample_rw007驱动
2024-04-12 18:35:31 +08:00
98c6a741c5
[bsp][nxp] 增加drv_spi_sample_rw007驱动
2024-04-12 18:35:31 +08:00
48b86cbb8e
[bsp][zynqmp] 为 DFZU2EG MPSoC 开发板支持标准版和Smart版内核 ( #8773 )
...
zynqmp support RT-Thread and RT-smart
2024-04-12 15:57:06 +08:00
6dbdf9c360
Add ra8 ra_pin_get support.
2024-04-11 18:50:23 -04:00
90f4d94ce8
Add ek-ra8d1 rw007 support.
2024-04-11 18:50:23 -04:00
a93722c3e1
Update ra8 readme.
2024-04-11 18:50:23 -04:00
d2555d2169
[bsp][renesas]Update drv_adc,i2c dirvers.
2024-04-11 18:50:23 -04:00
30c3eb9a56
[bsp][renesas]Fix ek-ra8d1 mdk build error.
2024-04-11 18:50:23 -04:00
ca90d3f6c3
[bsp][stm32]fix stm32f103 default console uart name
2024-04-11 18:49:10 -04:00
e50fbe8b94
[SBP] Stm32F407-rt-spark adapts to RTduino
2024-04-11 18:46:52 -04:00
83bd05391f
[add] Readme doc for stm32h7s7-disco BSP ( #8767 )
...
[bsp][stm32] add English version readme doc for BSP stm32h7s7-st-disco.
2024-04-11 14:55:34 +08:00
1497a3117a
[bsp][renesas]Add cortex-r52 rzt2m adaptation
2024-04-10 20:47:53 -04:00
81df7bcdde
[bsp/phytium]中断相关修改 ( #8742 )
...
* update smp 4
2024-04-11 00:09:17 +08:00
b14e0c08e1
[bsp/rpi4] fixup startup failure ( #8754 )
...
[bsp/rpi4] fixup startup issues
Signed-off-by: Shell <smokewood@qq.com>
2024-04-11 00:02:49 +08:00
87d47bf935
[fix] fixup spaces and add in ci.
2024-04-10 16:04:28 +08:00
187e69a698
[BSP] add bsp for st's new platform stm32h7s7-st-disco.
...
[drv] STM32H7RSxx_HAL bsp fixed and update.
[add] bsp stm32h7s7-dk README.md
2024-04-10 16:04:28 +08:00
d08ae0bfd1
[driver][soft-spi] spi device driver framework adds pin init function function
...
为什么提交这份PR (why to submit this PR)
ps：在设备初始化阶段不应该存在对硬件的操作
你的解决方案是什么 (what is your solution)
ps：添加一个pin_init函数，在spi设备使用时调用该函数来完成硬件引脚的状态初始化，而不是在设备初始化阶段对硬件进行操作，已经在瑞萨HMI上通过验证
2024-04-09 18:33:29 -04:00
62cd7ad961
support cvitek bsp spinor flash
2024-04-09 18:09:54 -04:00
LZerro
Rbb666
heyuanjie87
Shicheng Chu
sakumisu
yuanzihao
Abner
andeyqi
2310863495@qq.com
Meco Man
wdfk-prog
Jisheng Zhang
yiyi
LTreeshu
zms123456
hengchuan.qi
Chasel
Shell
ShaquilleLiu
latercomer
QTbin
zhangyan
zhuzhuzhu
sp-cai
LaterComer
Fan YANG
Jiading Xu
WKJay
lzh
flyingcys
Chen Wang
蒙蒙plus
JamieTx
sheltonyu
xiao-mang
WaterFishJ
liYangYang
Rbb666
QTbin
SCZeiDan
IceBear003
Junjie Wang
Fan Yang
sheltonyu
LZerro
chengy2
Siwei Xu
xiao-mang
Yaochenger
Yuqiang Wang
Abner
yandld
wirano
StackYuan