985a70ab15
Update hub.c
2020-03-21 20:56:31 +08:00
10e0f28754
Update cdc_vcom.c
2020-03-21 20:54:13 +08:00
3679dfa07e
Update ecm.c
2020-03-21 20:42:55 +08:00
30a9ef64c1
Merge pull request #3427 from DavidLin1577/patch-2
...
Fixed typos in Kconfig
2020-03-21 11:45:40 +08:00
beda0899f5
Merge pull request #3397 from luhuadong/develop
...
[Sensor] Support custom commands for rt_sensor_control
2020-03-16 21:28:30 +08:00
cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
...
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
822d8f4002
Merge pull request #3456 from zhao0116/spi
...
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
4c7106fa9d
component: sdio: fix potential ricky clock setting
...
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:
(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.
So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.
If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
7c4e70b3b3
[Sensor] Add user-commands range limitation
2020-03-16 11:03:32 +08:00
1c68bd9d3c
Support msc mode automatic switching
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
d906bf5b18
spi: support slave mode and master mode runtime config
...
support slave mode and master mode runtime config.
Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
11277014a3
[Components] sdio: try bus width depends on host's capability
...
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
a33bc0f321
[component] sdio: Fix mmc mount function if the whole device is a partition
...
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
eb5467bece
Fixed wrong output information in core.c
...
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
053ffb0527
Fixed typos in Kconfig
...
mesage -> message
memmory -> memory
2020-03-05 09:20:05 +08:00
39538e036b
Fixed wrong output information
...
to ->too
2020-03-04 23:13:45 +08:00
f9ab9d5868
Fixed wrong output information
...
to -> too
2020-03-04 23:04:52 +08:00
b3d196392c
Merge pull request #3413 from luhuadong/patch1
...
[Sensor] Add vendor info and sensor types for cmd
2020-03-04 11:44:25 +08:00
986b64cbe0
[driver][wlan] add raw frame send interface and Management frame filter interface
...
Signed-off-by: chenyong <1521761801@qq.com>
2020-02-29 17:12:48 +08:00
e09c99fcfb
fix raspi3-64 sdio driver
2020-02-28 14:56:56 +08:00
ac6f133f86
[Sensor] fixed %% print
2020-02-26 17:31:26 +08:00
3994ebbfd4
[Sensor] Add vendor info and sensor types for cmd
2020-02-26 17:20:41 +08:00
a646b9275d
Update sd.c
...
clean #if 0 code
2020-02-23 09:20:09 +08:00
815d231f4a
add change log
2020-02-22 22:43:14 +08:00
82f981d34c
[Sensor] Support custom commands for rt_sensor_control
2020-02-22 21:00:35 +08:00
26fa5e5fa2
[Sensor] Add the prefix corresponding to sensor types
2020-02-20 16:09:52 +08:00
7c2d7c7eb7
[Sensor] ASAIR is the trademark of Aosong
2020-02-20 15:39:39 +08:00
c734a7b3fa
[Sensor] Dust and eCO2 data should be defined unsigned
2020-02-17 23:26:54 +08:00
da8e829fa8
[Sensor] Add some class and vendor information of sensor
2020-02-17 23:17:54 +08:00
dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix
...
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-02-11 11:56:01 +08:00
50c2af5eea
[serial.c] 修复在没有开启ulog时，警告日志不会输出的问题
2020-01-21 16:38:07 +08:00
1499844699
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-01-18 10:12:29 +08:00
0fdf20cf58
添加虚拟串口接收缓存的 ENV 配置项，可手动配置接收缓存大小，默认为128字节
2020-01-17 15:42:56 +08:00
b87f493f2b
🐛 fix compile warning, undefine var
2019-12-31 16:16:15 +08:00
3ad6b30e18
[componects] 修复不能发现禁止写spi flash失败的情形
...
`(register_status & SFUD_STATUS_REGISTER_WEL) == 1` 这个表达式始终为假
SFUD_STATUS_REGISTER_WEL = (1 << 1)
2019-12-27 16:52:52 +08:00
a4dba7b583
[Components][USB][ECM] fix build error
2019-12-25 13:15:10 +08:00
9111aca176
Merge pull request #3279 from armink/fix_rbb
...
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 14:59:29 +08:00
6228ff5e98
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 10:39:55 +08:00
7a00b42e97
Update pipe.c
2019-12-18 23:19:54 +08:00
055061a639
[DeviceDrivers] Fix pipe memory issue.
2019-12-18 21:38:05 +08:00
a87c2ef970
Merge pull request #3234 from fmkong/spi_flash_sfud
...
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-18 20:03:28 +08:00
7e9d54d87a
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-17 17:46:43 +08:00
15b10bd5e2
[components][sfud] update sfud options.
2019-12-03 16:45:46 +08:00
ab981a32b5
[Device/I2C] Chang debug message print way to ulog
2019-11-26 07:41:43 +08:00
55c3182b78
Merge pull request #3193 from wangk-ge/master
...
修改内存泄漏问题
2019-11-21 22:04:42 +08:00
54b72927d1
Merge pull request #3214 from chengxiaohu/master
...
添加 W25Q64DW SPI Flash 到支持列表
2019-11-21 22:04:19 +08:00
6b8a3469f8
Merge branch 'master' of https://github.com/chengxiaohu/rt-thread
2019-11-20 23:38:35 +08:00
2a512f3df0
添加 W25Q64DW SPI Flash 到支持列表。实际应用中发现该芯片不支持sfdp。
2019-11-20 23:33:10 +08:00
ec3b4349d3
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into renhaibo-branch
2019-11-16 11:20:13 +08:00
aafed7b434
1.修复sd卡热插拔内存泄露的bug
...
2.dfs增加函数，配合实现sd卡热插拔自动挂载卸载文件系统
2019-11-16 11:16:48 +08:00
97b7661f6e
Merge pull request #3202 from armink/fix_rtc
...
[components] remove libc dependency in ulog and RTC driver.
2019-11-16 10:30:23 +08:00
d3ee03f9c6
[RNDIS]fix speed on HS
2019-11-15 15:05:21 +08:00
e59339e4b8
[components] remove libc dependency in ulog and RTC driver.
2019-11-14 18:09:55 +08:00
12eacb8df6
components: drivers: misc: pwm: Missing "pwm1" here.
2019-11-11 17:10:25 +08:00
649f75f861
修改内存泄漏问题
2019-11-11 16:46:43 +08:00
f82d4f1f6f
[DeviceDrivers] add warning about overflow by serial receiver
2019-11-01 10:38:07 +08:00
260a61d36a
[components/drivers][pm] fix data type problem
...
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2019-09-23 18:02:46 +08:00
32baa8e998
Merge pull request #3041 from FlyLu/master
...
fix i2c flags bug
2019-09-21 10:08:21 +08:00
711ce4a0ea
[usbd] Fixed Windows first recording failure.|修复windows下第一次录音失败的问题。
...
windows下第一次录放音失败的原因是：第一录放音时 windows 会先连续发送开始、结束检测设备，然后才正式开始。线程来不及处理两次开始事件不会累积，最后导致直接结束，
2019-09-19 23:12:24 +08:00
98b1956937
[usbd] Add usb audio class.
2019-09-19 21:01:25 +08:00
cde81a296d
[usbd] Fixed an error where change the interface did not call handler.|修正了改变接口不调用回调的问题
2019-09-19 20:58:58 +08:00
59dfbb1266
[usb device] Fix the problem of multiple altsetting of interface failing to properly enumerate.
...
修复多备用设备的接口不能正常枚举的问题。
2019-09-12 18:04:44 +08:00
7464427894
[SFUD] Fix the compiling warning for SFUD_FLASH_DEVICE_TABLE definition
2019-09-11 10:24:50 +08:00
8a3e66bc27
[components][drivers][wlan] 修复WLAN事件附加数据为空的问题
2019-09-06 15:28:46 +08:00
55b69111dc
fix i2c flags bug
2019-09-06 14:44:50 +08:00
2f2933245e
[components][drivers][sdio]修复 SDIO product 为空的问题
2019-09-03 16:55:10 +08:00
0f74ee7e20
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into drv_encoder
...
# Conflicts:
# components/drivers/misc/encoder.c
2019-08-30 16:11:46 +08:00
b76d3dac8a
[components][drivers] change name: encoder -> pulse_encoder
2019-08-30 15:58:52 +08:00
4652480b64
Merge pull request #2993 from balanceTWK/encoder_perfect
...
[components][drivers][encoder] update
2019-08-26 13:45:27 +08:00
363c9b1460
[bsp] [stm32] fix drv_can.c and can.c bug
2019-08-23 20:40:09 +08:00
086d26e0b4
[components][drivers][encoder] update
2019-08-23 14:43:44 +08:00
d682c35441
Merge pull request #2948 from balanceTWK/master_capture
...
[components][drivers] add input capture driven framework
2019-08-21 13:48:12 +08:00
f9bad31d57
[components][drivers] change name: capture -> inputcapture
2019-08-21 10:51:02 +08:00
0425f913ef
Merge pull request #2949 from enkiller/wlan
...
[components][drivers][wlan] 1.修复异步调用 dhcp 无法停止的bug 2.支持解挂载 lwip 协议
2019-08-20 08:44:29 +08:00
d6fb6fec47
[components][drivers][wlan] 1.修复异步调用 dhcp 无法停止的bug 2.支持解挂载 lwip 协议
2019-08-18 20:16:21 +08:00
c81eebcd5d
[bsp] [stm32] fix drv_can.c
2019-08-16 12:14:30 +08:00
e1587de6f7
[components][drivers] update capture driven framework
2019-08-15 16:44:05 +08:00
473505053f
[components][drivers] add capture driven framework
2019-08-13 20:33:23 +08:00
ed1db32196
Merge pull request #2937 from balanceTWK/master_encoder
...
[components][drivers] add encoder driven framework
2019-08-13 11:39:37 +08:00
2b9a9e0163
[components][drivers] update : Move clear_count() function from ops->control() to ops->clear_count()
2019-08-12 13:47:03 +08:00
e5dc60e3cf
[components][drivers] update encoder driven framework
2019-08-11 16:15:43 +08:00
70dd41d24b
[components][drivers][wlan] WLAN 支持被动扫描
2019-08-11 15:17:04 +08:00
cc565da5a1
[components][drivers] add encoder driven framework
2019-08-09 18:42:14 +08:00
ab37857609
Merge pull request #2922 from enkiller/workqueu
...
[components][drivers][ipc] 完善工作队列，增强稳定性
2019-08-07 13:30:24 +08:00
e855fb8536
[components][audio]improve device ops interface and data flows.
2019-08-06 11:36:50 +08:00
badd211457
[components][drivers][ipc] 完善工作队列，增强稳定性
...
1. 可直接提交延时任务, 无需额外调用延时初始化
2. 修复延时任务 PENDING 时，取消任务会递归调用的问题
2019-08-05 14:18:15 +08:00
7d801615b2
[components][drivers][wlan] 修复密码临界值判断错误
2019-07-31 11:57:37 +08:00
77ce9148d7
[components][drivers][wlan] 修复自动连接 32 密码长度失败的问题，增强代码稳定性
2019-07-26 20:27:42 +08:00
20130d19b5
Merge pull request #2894 from enkiller/wlan
...
[components][drivers][wlan] 自动连接周期可配置，可指定扫描通道
2019-07-25 18:52:16 +08:00
6fbc7494b8
[components][drivers][wlan] 自动连接周期可配置，可指定扫描通道
2019-07-25 10:30:54 +08:00
0cfcb906d5
【完善】去除串口 dma 中无法触发的代码判断
2019-07-23 16:16:12 +08:00
423544d1c3
Merge pull request #2873 from Ingenic-community/master
...
usb: hid.c: 修复编译过程中的错误/Fix compile-time error.
2019-07-21 12:10:12 +08:00
de69a9b500
sdio: mmc.c: 修复缩进/Fix indentation.
...
修复版权信息中的缩进格式。
Fix indentation in copyright information.
Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 21:18:56 +08:00
976ea24112
sdio: mmc.c: 防止容量计算过程溢出/Prevent capacity calculation overflow.
...
修改“mmc_parse_ext_csd”函数，防止容量计算过程溢出。
Modify the "mmc_parse_ext_csd" function to prevent the capacity
calculation process from overflowing.
Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 21:18:56 +08:00
3c9375181d
usb: hid.c: 修复编译过程中的错误/Fix compile-time error.
...
在第375行中,“uint8_t *data,”应改为“rt_uint8_t *data,”。
In line 375, "uint8_t *data," should be changed to "rt_uint8_t *data,".
Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
2019-07-19 16:03:57 +08:00
9a1be9e73d
Merge pull request #2860 from willianchanlovegithub/sensor
...
[component][drivers][sensors]Increase the output of sensor information
2019-07-17 10:43:35 +08:00
06b4a0611d
[component][drivers][sensors]Fix compilation warnings
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-07-17 09:27:30 +08:00
7db27345c2
[component][drivers][sensors]Increase the output of sensor information
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-07-16 18:30:15 +08:00
46498d5d1e
[components][drivers][wlan] 功能可裁剪
...
- WLAN 连接信息保存功能可裁剪
- WIFI MSH 命令功能可裁剪
- WLAN 管理功能可裁剪
- WLAN 自动连接功能可裁剪
- WLAN 自动连接时使用最新热点信息
- WLAN 用户事件回调由独立线程调用
- WLAN 独立线程可裁剪
- WLAN 协议管理功能可裁剪
- LWIP 协议层可裁剪
- SCAN 结果支持过滤
- WIFI 阻塞式连接支持多次扫描
- WLAN 新增网卡对象指针
- WLAN 获取信息时更新信号强度
- 其他优化性质改动
2019-07-16 18:26:31 +08:00
1f2e8e1f3f
[components][drivers][hwcrypto] 更正一处命名错误
2019-07-15 13:48:14 +08:00
c92ec76df8
[Device Drivers] Remove backup mtd code
2019-06-27 07:43:53 +00:00
0c07c2005d
[DeviceDrivers] Remove backup mtd code
2019-06-27 07:36:25 +00:00
608ead86f4
[driver][nand] Fix hardfault errors.|修复 hardfault 错误。
2019-06-19 17:57:47 +08:00
b2dedae40d
[driver][mtd_nand] Add debug command to MSH.|向 MSH 添加调试命令。
2019-06-19 17:21:43 +08:00
c421757cc4
[driver][mtd_nand] Formatting code.|格式化代码。
2019-06-19 17:21:42 +08:00
d8702aa568
Merge pull request #2793 from tyustli/cpp11_error
...
fix kernel and framework no cast type error
2019-06-19 15:33:27 +08:00
d8eb0cfc1e
fix kernel and framework no cast type error
2019-06-18 20:09:19 +08:00
b01eb52c25
Merge pull request #2789 from tyustli/touch
...
add touch index in Kconfig file
2019-06-18 18:11:42 +08:00
e8e2e0af3c
add touch index in Kconfig file
2019-06-18 11:12:16 +08:00
93de68129e
Merge pull request #2780 from zhangjun1996/master
...
修复由于stm32系列的can驱动编译错误
2019-06-17 20:05:27 +08:00
2acfc7009c
Merge pull request #2775 from Guozhanxin/sensor_fix
...
修复 sensor 设备关闭后分配的内存不释放的问题
2019-06-17 13:25:37 +08:00
537c2376f9
1，修复由于stm32系列的hal库升级导致stm32f1和stm32f4平台的can驱动编译错误
...
2，关闭components/drivers/Kconfig中默认打开的can硬件滤波器选项
3，为了让can波特率设置匹配stm32f429的时钟，给stm32f429增加波特率表
4，以上修复在stm32f103-fire-arbitrary，stm32f407-atk-explorer，stm32f429-atk-apollo三个bsp中测试通过
2019-06-15 11:52:11 +08:00
06051905f0
修改函数出错时返回值为负值
2019-06-14 09:03:07 +08:00
7d6fa2388d
[sensor] To streamline the code.| 精简代码，去除冗余的代码。
2019-06-13 17:52:52 +08:00
116b7880c3
add enable/disable interrupt command
2019-06-13 16:48:40 +08:00
2600f82e39
[sensor] Fixed error with mutex_lock take and release not matching.| 修复锁的获取和释放不对应的错误.
2019-06-13 16:01:23 +08:00
44abc90990
[sensor] Add static keywords for internal functions.| 为内部函数添加 static 关键词。
2019-06-13 15:39:11 +08:00
1ec6f5b101
[sensor] Fix the problem that memory is not free after the sensor is closed. | 修复sensor设备关闭后内存不释放的问题。
2019-06-13 15:39:11 +08:00
10ac5f7a34
modify return value and delete device name calloc
2019-06-13 11:16:44 +08:00
89b90592ee
add touch framework
2019-06-12 09:38:32 +08:00
97ea1a3b6e
Merge pull request #2768 from lymzzyh/rndis
...
[Components][USB][RNDIS/ECM] 修复热插拔鲁棒性和delay linkup 使用硬件定时器时报错的问题
2019-06-11 17:29:51 +08:00
71b0c1cb73
Merge pull request #2767 from Zero-Free/master
...
[components][pm]add pm ops support
2019-06-11 16:03:01 +08:00
e1517a0981
[Components][USB][RNDIS] fix delay linkup using soft timer
2019-06-11 15:32:37 +08:00
2a738e1ee2
[Components][USB][ECM] fix hotplug
2019-06-11 15:27:11 +08:00
c12d59dc02
[Components][USB][RNDIS] fix hotplug
2019-06-11 15:24:21 +08:00
0008256663
[components][pm]add pm ops support
2019-06-11 11:33:21 +08:00
7a75e449b6
[Components][USB][ECM] fix hotplug
2019-06-10 14:10:59 +08:00
cc9ce52bae
[Components][USB][RNDIS] fix hotplug and "delay linkup"
2019-06-10 14:10:08 +08:00
c8f0ae3f11
Merge pull request #2755 from Guozhanxin/sensor_fix
...
[sensor] Fixed error with mutex_lock take and release not matching.
2019-06-06 21:30:45 +08:00
8ade4fff2e
[sensor] Fixed error with mutex_lock take and release not matching.| 修复锁的获取和释放不对应的错误.
2019-06-06 16:14:51 +08:00
ab7c1530ea
[components][drivers] 硬件大数适应性调整
2019-06-05 16:57:09 +08:00
34e5383f9a
[sensor] fixed step name display abnormal.
2019-05-30 00:06:44 +08:00
ab700d54aa
[DeviceDriver][SPI] Cleanup the at45db/gd25q/w25q/sst25v SPI flash driver. Please using SFUD instead of them.
2019-05-29 14:05:39 +08:00
f9a7b47955
[DeviceDrivers][i2c] Remove the fm24clxx driver in i2c.
2019-05-29 11:17:46 +08:00
1cb3c89bce
[components][drivers] add hardware crypto device
2019-05-25 10:59:12 +08:00
6b1f8d9155
remove gnu99 code
2019-05-16 10:22:57 +08:00
f58e947da6
[components/drivers/serial]add low level DMA TX config support.
2019-05-13 15:57:04 +08:00
ec6cb9f260
[BSP][qemu-vexpress-a9] code cleaup for compiling warning.
2019-05-12 15:07:26 +08:00
42a32fd473
[components][pm]add check for pm initialize.
2019-05-09 20:53:34 +08:00
d0b686ed3c
Merge pull request #2653 from Zero-Free/pm_dev
...
改进低功耗组件
2019-05-09 09:42:19 +08:00
8f2f232887
[sensor] 完善sensor框架
...
* 修复开启 RTC 编译报错的问题。
* 在显示 sensor 数据时添加单位。
2019-05-08 11:47:07 +08:00
d51e0783ba
[components][pm]fix some issues with low power components
2019-05-07 21:03:48 +08:00
c57f2370ad
[components][pm]improve low power management components
2019-05-06 18:17:55 +08:00
91345d62af
[components][drivers][ipc] 初始化工作对象所有成员
2019-04-28 14:31:57 +08:00
b67a8152a5
[components][drivers][can] can.c bug修复：
...
在RT_CAN_USING_HDR宏关闭的时候，接收数据大小的计算应该是：已使用链表数*sizeof(struct rt_can_msg)。
2019-04-25 11:18:28 +08:00
83b6260b3f
[components][workqueue]improve delayed work for reinit.
2019-04-22 11:43:45 +08:00
fdc9683150
Add new sensor type and vendor type.
...
sensor type: force sensor
vendor type: MiraMEMS
2019-04-17 16:32:32 +08:00
fa4d4ab7cf
Update all of debug log definition to DBG_TAG and DBG_LVL.
2019-04-12 10:18:57 +08:00
c3ee1be7ee
[components][drivers][workqueue] increase the default stack size of the workqueue thread.
2019-04-03 18:26:55 +08:00
24c9e8cb3f
Update sfud.c
...
修复可能存在越界访问的问题
2019-04-02 16:09:17 +08:00
David Lin
Bernard Xiong
Shawn Lin
luhuadong
Cliff Chen
Yifeng Zhao
chenyong
bigmagic
A.orz
z14git
Ihavedone
shangjinlong
zhaoshaowei
ZYH
armink
Fanming
tangweikang
a1012112796
hichard
Steven Liu
wangk-ge
Ernest
MurphyZhao
guozhanxin
tangyuxin
linch
tyustli
EvalZero
SummerGift
Zhou Yanjie
Willian Chan
zhangjun1996
misonyo
yaomo718
Zhou DingHua
HubretXie