ade78fb12c
Merge pull request #3083 from tyustli/h743
...
add stm32h743-st-nucleo bsp
2019-09-20 06:30:11 +08:00
7f8642e75c
Merge pull request #3080 from gavin-liugang/master
...
imxrt: Update for imxrt UART, SDRAM, ENET, PHY modules
2019-09-20 06:25:44 +08:00
cfb6e59941
[bsp][stm32][stm32f767-atk-apollo] Fix missing lcd_port.h error
2019-09-19 11:44:17 +08:00
943f83d58f
imxrt:enet: Support imxrt ethernet interface
...
1. Add "drv_eth.c" for all imxrt platforms.
2. Add ksz8081 phy driver for imxrt1052-nxp-evk board.
3. Disable the LED demo in main.c file if enable the ENET
and ksz8081 phy, because the PINs of LED and ksz8081
reset are from the same GPIO.
4. Update the relevant Kconfig and Sconscript files.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:21:42 +08:00
5cabac6d9c
imxrt:app: Support ramfs for imxrt1052-nxp-evk
...
Add ramfs (8MB size) support for imxrt1052-nxp-evk board.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
57630ae4bd
imxrt:sdram: Add sdram support for imxrt1052-nxp-evk
...
1. Add sdram item in bsp/imxrt/imxrt1052-nxp-evk/board/Kconfig
2. Add sdram configuration header file for imxrt1052-nxp-evk
3. Update the sdram space assignment for memheap
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
259e9e4fc6
imxrt:board: Add LPUART3 item for imxrt1052-nxp-evk
...
Add LPUART3 item in imxrt1052-nxp-evk Kconfig file to support
Arduino UART interface.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
9791c31c1b
imxrt:uart: Add PINs init for each uart port
...
Add PINs init function based on the selected UART port.
In general, user should configure all necessary PINs based on
the specific imxrt board in:
bsp/imxrt/xxxx/board/MCUX_Config/pin_mux.c
There is a convenient GUI tool named MCUXpresso Config Tools,
it's free and can be obtained from NXP offical website. Open
the file:
bsp/imxrt/imxrt1052-nxp-evk/board/MCUX_Config/MCUX_Config.mex
with MCUXpresso Config Tools, set the necessary PINs (or clocks)
and generate the new code of pin_mux.c (or clock_config.c), the
project can get right configurations based on specific imxrt
board.
But, there is no relation between RT-Thread Kconfig and MCUXpresso
Config Tools. User selects one driver in RT-Thread menuconfig, then
the ping_mux.c should be udpated by MCUXpresso Config Tools to set
the right PIN configurations for the selected driver. It's clear
but a little complex.
We add the PIN init functions for some drivers in the board.c file,
1. It's convenient to usr a driver in RT-Thread. Just select the
driver, then the code will include all necessary parts, and the
driver can work well.
2. User can also configure the PINs with MCUXpresso Config Tools.
3. The drivers in bsp/imxrt/libraries/drivers are common for all
imxrt boards. They may have different PIN configurations based
on different hardware design. So we put the PIN init functions
in each board.c file following each different imxrt board.
Signed-off-by: Gavin Liu <gavin-liugang@outlook.com>
2019-09-19 11:13:57 +08:00
e3ba233dc0
add stm32h743-st-nucleo bsp
2019-09-18 10:11:13 +08:00
b789721307
[bsp][stm32][stm32f767-atk-apollo] Add LCD driver port
2019-09-17 13:59:14 +08:00
bb014b2061
Merge pull request #3050 from ericQiang/master
...
bug fix: the value of timer auto reload should be (val-1)
2019-09-16 17:36:23 +08:00
6259e715d2
Merge pull request #3053 from willianchanlovegithub/WillianChan
...
[bsp][stm32][f796-disco]Add stm32f769-st-disco bsp
2019-09-16 17:35:57 +08:00
58aa6b792a
[bsp][stm32][templates/stm32f7xx]Fix the problem of indentation.
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-16 14:05:50 +08:00
c3293f4386
[bsp][stm32][f769-disco]Fix the problem of indentation.
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-16 13:49:10 +08:00
91e1918250
Merge pull request #3071 from xfan1024/fix-stm32l0-exti-bug
...
Fix STM32L0 Series External Interrupt BUG
2019-09-15 09:38:54 +08:00
41753b2e7a
Merge pull request #3066 from zhangjun1996/master
...
[bsp][stm32][libraries]删除冲突的spi库文件，修正stm32f1系列的uuid读取函数
2019-09-15 09:38:19 +08:00
20d9ac459e
Merge pull request #3054 from a1012112796/writing_zzc_add_bsp_robomaster_a
...
[bsp][stm32] 更新stm32f427-robomaster-a外设驱动配置
2019-09-15 09:37:47 +08:00
6db1bd4516
Merge pull request #3062 from yangjie11/yj_kconfig_com
...
[bsp]解除组件初始化与使用user main的依赖，并修改相应的 Kconfig
2019-09-15 09:35:42 +08:00
8be42fdf2f
Fix STM32L0 Series Interrupt BUG
...
Signed-off-by: xiaofan <xfan1024@live.com>
2019-09-13 02:13:51 +08:00
41f00e5315
[bsp][stm32] fix : #define HEAP_BEGIN
2019-09-12 10:35:05 +08:00
3cf0f34164
[bsp][stm32][libraries]删除冲突的spi库文件，修正stm32f1系列的uuid读取函数
2019-09-12 10:34:49 +08:00
c51352d7cb
[bsp][stm32f7]Fix "scons --dist" error in stm32f7's bsp
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-11 18:16:34 +08:00
315843438b
[bsp][stm32][f769-disco]Add uart5 to support esp8266
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-11 14:32:25 +08:00
1ef33e66cd
[bsp][Kconfig]在bsp的Kconfig中select组件初始化与user main的选项
2019-09-11 12:06:43 +08:00
2ed84b61b0
Merge pull request #3056 from niannianyouyu/master
...
Add UART1 driver of rv32m1_vega
2019-09-11 00:06:44 +08:00
67ffb94360
Add the driver of UART1
2019-09-10 21:09:29 +08:00
60bda424eb
[bsp][stm32] 更新stm32f427-robomaster-a外设驱动配置
...
1.增加串口1,7,8配置，经实机测试无误
2.增加PWM4 CH1 -- 4, PWM12(BUZZER)配置，因条件有限，仅测试了TIM12 CH1
3.经测试,CAN通信无法正常使用，原因尚未找出，故暂时删去此配置
测试所用编译器： mdk5, IAR
2019-09-10 19:17:38 +08:00
19034c4aa4
[bsp][stm32][f769-disco]Modify README.md
2019-09-10 18:23:36 +08:00
3bef0a1e41
[bsp][stm32]Delete dist files
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-10 18:15:54 +08:00
2d31662e94
[bsp][stm32]Delete dist files
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-10 18:08:40 +08:00
ba9759e0fa
[bsp][stm32][f796-disco]Add stm32f769-st-disco bsp
...
Signed-off-by: Willian Chan <chentingwei@rt-thread.com>
2019-09-10 18:00:48 +08:00
ee668cce81
bug fix: the value of timer auto reload should be (val-1)
2019-09-09 22:22:29 +08:00
4ba5fe5ab5
Merge pull request #3035 from Linjieqiang/fix_spelling_mistake
...
fix spelling mistake for "RT_IDEL_HOOK_LIST_SIZE"
2019-09-09 13:25:11 +08:00
1370a4c79b
Merge pull request #3044 from yangjie11/stm32-lib
...
[bsp][stm32] update Stm32 lib
2019-09-09 08:08:43 +08:00
53fc84656b
[bsp][stm32/libraries] update STM32L4xx_HAL lib to V1.14.0
2019-09-05 18:07:41 +08:00
77a90a2cdc
[bsp][stm32/libraries] update STM32H7xx_HAL lib to V1.5.0
2019-09-05 17:53:14 +08:00
804e3967d0
[bsp][stm32/libraries] update STM32G0xx_HAL lib to V1.3.0
2019-09-05 17:43:00 +08:00
0cde9a27c6
[bsp][stm32/libraries] update STM32F7xx_HAL lib to V1.15.0
2019-09-05 17:35:36 +08:00
2f269499de
[bsp][stm32/libraries] update STM32F2xx_HAL lib to V1.8.0
2019-09-05 17:19:57 +08:00
bae87829a9
[bsp][stm32/libraries] update STM32F1xx_HAL lib to V1.8.0
2019-09-05 17:06:53 +08:00
7498a9296a
[bsp][stm32/libraries] update STM32L0xx_HAL lib to V1.11.2
2019-09-05 16:47:02 +08:00
2f7d9d4330
[bsp][stm32/libraries] update STM32F0xx_HAL lib to V1.10.1
2019-09-05 14:58:33 +08:00
d16d78c53e
fix spelling mistake for "RT_IDEL_HOOK_LIST_SIZE"
2019-09-05 08:33:12 +08:00
42248d81e5
Merge pull request #3036 from Linjieqiang/fix_stm32hal_rtc_error
...
bsp: fix stm32 rtc hal library error.
2019-09-05 08:05:50 +08:00
1d44368b27
[bsp] [stm32] port to dfs
2019-09-04 20:36:52 +08:00
dce37d0b4b
bsp: fix stm32 rtc hal library error.
2019-09-04 10:08:34 +08:00
03f8762e28
Merge pull request #2989 from yexinfu/master
...
[bsp][stm32][HAL_Drivers]modified stm32 timer_start cant set HWTIMER_MODE_PERIOD mode
2019-09-04 08:03:28 +08:00
9573b6c013
Merge pull request #3023 from a1012112796/writing_zzc_add_bsp_robomaster_a
...
新增stm32f427-RoboMaster-a板 BSP包
2019-09-03 22:26:37 +08:00
c14bb274dc
纠正 新增stm32f427-robomaster-a板BSP包编写错误
...
更改stm32f427-robomaster-a板BSP包board.png图片
2019-09-03 18:28:55 +08:00
51d1ec80a4
fix docs link err
2019-09-03 11:41:22 +08:00
Bernard Xiong
gbcwbz
Gavin Liu
tyustli
Willian Chan
xiaofan
tangweikang
zhangjun
yangjie
niannianyouyu
a1012112796
ericQiang
LinJieqiang