c2d8bff672
[Bsp] stm32f10x delete compiler c99 mode
2016-09-21 11:31:53 +08:00
4503e5d79d
Merge pull request #634 from margguo/master
...
[BSP] Update gpio.c in BSP/stm32f10x/drivers/gpio.c
2016-05-23 22:23:03 +08:00
09b0e48439
add 48 pins IC define in BSP/stm32f10x
2016-05-23 22:15:14 +08:00
4bbbfab29c
add 48 pins IC define in BSP/stm32f10x
2016-05-23 22:00:21 +08:00
3defb749cb
add 48 pins IC define in BSP/stm32f10x
2016-05-23 21:57:19 +08:00
7d17f50a31
[BSP] Add usart DMA Rx driver to stm32f10x.
2016-05-14 13:43:14 +08:00
0d63eb5f6d
fix hardfault when RT_CAN_USING_BUS_HOOK is enabled in bsp/stm32f10x
...
function `rt_pin_write` is invoked by function `can_bus_hook`, and it should to be initialized by gpio.c.
but gpio.c was not added in SConscript
2016-04-14 23:47:32 +08:00
b420e83da4
fix can baud rate config error in bsp/stm32f10x fix #597
...
enum CANBAUD was changed in components/drivers/include/drivers/can.h ,
which causes array index out of bound in bsp/stm32f10x/drivers/bxcan.c
temporarily remove RT_CAN_USING_BUS_HOOK, because there are some bugs in
bsp/stm32f10x/applications/canapp.c function can_bus_hook
2016-04-13 21:24:36 +08:00
a6fcf8cf1f
remove function finsh_set_device in application.c in bsp/stm32f10x
...
finsh_set_device is not needed since version 1.2.0
2016-04-09 13:15:49 +08:00
e35ad3e677
fix initialization error in bsp/stm32f10x
...
temporarily disable canapp initialization.
2016-04-03 21:39:33 +08:00
fc2467a190
fix keil armcc compiling report "Error: expected an expression"
2015-12-10 21:47:53 +08:00
b2d55d2c8c
correct stm32f10x can sendmsg rtr flag error
2015-11-23 09:43:48 +08:00
33de63fbe2
correct compile error when using can
2015-11-23 09:43:17 +08:00
62f0def025
1.delete comment code
...
2.add change log
2015-07-16 22:50:24 +08:00
32855cfd3a
rename bsp/stm32f10x/drivers/rtc.c to stm32f1_rtc.c
...
rename bsp/stm32f10x/drivers/rtc.h to stm32f10x/drivers/stm32f1_rtc.h
remove set_date,set_time function.
2015-07-16 02:08:44 +08:00
6fad73c939
[BSP] stm32f10x can code format
2015-07-07 16:31:46 +08:00
b750e11ec1
[bsp]stm32f10x add canapp can bus hook set
2015-07-07 14:37:07 +08:00
b7571b5549
[BSP] stm32f10x fix bxcan for new changed driver
2015-07-07 14:37:04 +08:00
b7010ff946
fix bxcan include component.h dirs error
2015-06-30 14:27:05 +08:00
70aedb7a34
correct bxcan rcv irq error
2015-06-16 08:49:26 +08:00
40123f0973
correct bxcan drive errors
2015-06-16 08:49:25 +08:00
b319fb53e4
correct bxcan rcv msg rtr flag set
2015-06-16 08:49:25 +08:00
b155067b6b
correct bxcan init error
2015-05-26 14:43:46 +08:00
951fd5429c
[BSP] remove Keil MDK3 project file
2015-05-23 10:26:38 +08:00
be895cc9b2
[BSP] update Keil MDK project file.
2015-05-20 16:57:44 +08:00
8e29e3d98b
add author information
2015-05-15 07:58:21 +08:00
eb56b832ef
Add Can Drv
2015-05-14 16:52:48 +08:00
e38f3aa39c
[BSP] Update Keil MDK project files.
2015-05-11 21:10:25 +08:00
2be9959891
correct stm32f10x pin64 define error
2015-04-23 16:11:38 +08:00
93122aaa19
[BSP]stm32f10x: Fix gpio driver for 144pins and 64pins
2015-03-25 10:44:02 +08:00
c377690989
[BSP]stm32f10x: Add gpio driver for pin driver frame
2015-03-24 16:30:37 +08:00
351dd923e3
bsp stm32f10x add uart4 drive
2015-03-11 15:24:09 +08:00
a61d228b76
Nanopb is a plain-C implementation of Google's Protocol Buffers data
...
format. It is targeted at 32 bit microcontrollers, but is also fit for
other embedded systems with tight (2-10 kB ROM, <1 kB RAM) memory
constraints.(http://koti.kapsi.fi/jpa/nanopb/ )
How to use the example:
1. move examples/nanopb to bsp/xxxx/
2. enable macro RT_USING_NANOPB in rtconfig.h
3. regenerate the project file (scons --target=xxxx)
4. rebuild the project
2015-03-10 18:24:17 +08:00
79c37cb30f
[BSP]changed stm32f10x uart driver. make sure the serial transmit
...
complete in putc().
2015-01-31 11:18:59 +08:00
131c41d182
[BSP]support 9 data bits and parity config for stm32f10x uart driver.
2015-01-31 11:14:10 +08:00
1213dec3c9
fix #347
2015-01-31 11:05:00 +08:00
3c65a522fd
Add mdk5 project for stm32 bsps
2014-11-19 15:28:56 +08:00
77b214f1bc
[BSP]Add serial receive overflow interrupt to stm32f10x ISR.
2014-09-13 11:53:21 +08:00
04c4e5d9a4
[BSP]Fixes two writing mistake for stm32f10x.
2014-09-13 11:50:54 +08:00
537beefa70
拼写错误
...
drvers->drivers
2014-09-08 19:53:55 +08:00
9572d3e46a
[bsp] Fix STM32F10x compiling warning.
2014-07-21 06:23:50 +08:00
26118499e0
[BSP] remove rt_device_init_all() invoking.
2014-07-19 06:50:00 +08:00
74377b2650
[Drivers] re-write serial framework.
2014-07-18 07:21:09 +08:00
2a9e893c79
initialize timer in bsp
...
With new timer algorithm, timer should be initialized during startup. So
add them to the bsps. Use these commands to get which bsp is missing
calling the function:
% git grep rt_system_timer_init bsp|sed -n 's|bsp/\([^/]*\).*|\1|p' | sort | uniq > have_tm_init
% ls -1 bsp |sed -n 's|\([^/]*\).*|\1|p' | sort > all_bsp
% comm -3 all_bsp have_tm_init
beaglebone
lpc176x
lpc178x
ls1bdev
mb9bf506r
stm32f10x
xplorer4330
2013-10-21 00:31:10 +08:00
d70761222c
stm32f10x: fix the rtgui initialization
...
The rtgui_system_server_init prototype is wrong. And if we use
RT_USING_COMPONENTS_INIT, there is no need to call
rtgui_system_server_init again.
2013-09-03 20:09:45 +08:00
13c30f9269
update usart driver: use serial driver component.
2013-07-12 23:32:48 +08:00
b12f6bbdee
cleanup code.
2013-07-12 23:28:24 +08:00
fc9d7926e2
update project support auto initial.
2013-07-12 23:09:12 +08:00
c44b02f08c
support auto initial.
2013-07-12 23:08:46 +08:00
8890e83aa9
update DM9000 ethernet driver for auto initial.
2013-07-12 22:54:53 +08:00
Aubr.Cool
Bernard Xiong
margguo
armink
gbcwbz
zhoujie
FlyM
Bright Pan
unknown
tcz717
Grissiom
aozima