Commit Graph

7363 Commits

Author SHA1 Message Date
Rbb666 49c39d4a8d [bsp][gd32]Fix the problem that uartv2 does not enable dma compilation error. 2024-09-13 17:29:23 -04:00
Yilin Sun 779547d708 bsp: nxp/mcx/mcxc/mcxc444: Add SPI driver support.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-09-12 18:15:32 -04:00
Shell 7528645f59 feat: libcpu/risc-v: unify context on c906, virt64
Changes:
- added config for NEW_CTX_SWITCH
- used new context on c906 sched switch routine
- update _rt_hw_stack_init to fit into NEW_CTX_SWITCH
- separated vector ctx from the generic

Signed-off-by: Shell <smokewood@qq.com>
2024-09-11 18:06:51 -04:00
Shell adbbd24ad7 feat: bsp: qemu risc-v64: fit into common64 2024-09-11 18:06:51 -04:00
zms123456 08221b54d0
[kernel][mutex] fix bug of thread exit without releasing mutex & add error check log 2024-09-11 18:03:43 -04:00
Rbb666 0df9a9f0cc [bsp][hpmicro]添加utest相关段信息,修复scons编译问题 2024-09-10 23:59:59 -04:00
liangzohar 240172609c [bsp/n32] 修复每次上电都初始化RTC导致上电时间被重置的问题 2024-09-10 19:53:01 -04:00
Chen Wang 6fc1fc72b7 bsp: cvitek: clean up useless variable assignments in SConstruct
CV18xx RISC-V C906L.

Configuration value for CPU and ARCH are already defined in rtconfig.py.
Remove these duplication from SConstruct.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-09-05 23:39:06 -04:00
zhangyan 5181857148
[bsp/phytium]默认配置修改 2024-09-05 18:18:27 -04:00
yandld 1cc0fb87df fix README typo 2024-09-05 13:04:16 +08:00
yandld ba7e469772 [bsp][mcxc444] update README and keil project 2024-09-05 13:04:16 +08:00
Yilin Sun b4165288fc bsp: nxp/mcx/mcxc: FRDM-MCXC444: Kconfig: Add I2C support. 2024-09-04 23:34:40 +08:00
Yilin Sun b76fd6ba0a bsp: nxp/mcx/mcxc: Add I2C driver support. 2024-09-04 23:34:40 +08:00
Z8MAN8 cea7670e7f bsp: cvitek: fix cvitek uart driver can not repeat configure
After first called from uart open, the dw8250_uart_configure
API cannot be called again. Otherwise, this will mess up the
device, and uart will not act properly to interrupt again.

Analysis: Configure uart device will close recive interrupte,
causing uart device to malfunction.

Solution: After configure uart device, enable the device's
recive interrupte.

Signed-off-by: Shicheng Chu <1468559561@qq.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
2024-09-03 20:50:50 -04:00
flyingcys 2e224b30ad [bsp/cvitek] eth driver support phy link detect
Signed-off-by: flyingcys <flyingcys@163.com>
2024-09-03 18:17:30 -04:00
yandld cf56227000 [bsp][mcxc] add rtc/wdog/uart driver 2024-09-03 18:15:17 -04:00
Yilin Sun ad256db2c0 bsp: nxp/mcx/mcxc: FRDM-MCXC444: Fix GCC build suport.
This patch fixes GCC build support for FRDM-MCXC444.

* Updated compiler flags to Cortex-M0 without FPU.
* Updated linker script to add RT-Thread const tables.
2024-09-03 15:22:05 +08:00
sakumisu 0d87b028ed
update(cherryusb): add config for bl616 usbdev and usbhost 2024-09-02 22:27:04 -04:00
sheltonyu 6a30ec2625
[bsp/at32] ethernet support phy lan8720 and yt8512 2024-09-02 12:51:06 -04:00
sheltonyu a40f2a62ef
[bsp/at32] 1.add support m412/416 series, 2.add drv_can_v2 driver (support canfd) 2024-09-02 00:41:18 -04:00
sakumisu f7de9de7dd update(cherryusb): add config for hpm6750 usbdev and usbhost 2024-09-02 00:40:29 -04:00
sakumisu b462daf57e update(cherryusb): add config for mcxn947 usbdev and usbhost 2024-09-02 10:15:43 +08:00
Shell b6f1b16d7a feat: bsp: qemu-riscv64: using klibc API for printf 2024-09-01 15:12:34 -04:00
Shell a5042f5bb5 feat: bsp: qemu-riscv64: updates of building & docs
- using generic command instead of abs path
- update BSP configurations
- update README
2024-09-01 15:12:34 -04:00
Shell 1c5340ce3a feat: bsp: qemu-riscv64: remove useless configs 2024-09-01 15:12:34 -04:00
下里巴人 9e690694c7
[bsp][nxp][mcxa153] add spi1 driver entry 2024-08-28 21:07:05 -04:00
heyuanjie87 b3fbddda80
[bsp/cvitek]修正sdhci发送命令超时后触发两次信号量的问题
修正命令超时后触发两次信号量的问题

详解:
中断状态寄存器的BIT0仅表示sdhci处理命令完成,完成结果由其它位指示,当出错时
BIT0也会值1产生中断

Signed-off-by: heyuanjie87 <943313837@qq.com>
2024-08-28 18:33:50 -04:00
CYFS 4f10d05a5b
[bsp][ht32] 修复编译问题
修复scons编译问题并添加ci
2024-08-28 18:31:59 -04:00
zhugengyu b9f4daa97a
[BSP][Phytium] add support for mainbranch cherryusb (xhci host + pusb2 device/host) 2024-08-27 22:06:13 -04:00
Shicheng Chu 66738d71da bsp: cvitek: Add support for duos_sd
Supports both big and little cores of RISC-V C906,
but does not support ARM cores. Currently, only UART
drivers are supported on the peripherals.

Signed-off-by: Shicheng Chu <1468559561@qq.com>
2024-08-27 00:53:15 -04:00
flyingcys 82f30aa54f
rename c906 FPU macro (#9290)
1. 修改 ENABLE_FPU 为 ARCH_RISCV_FPU,与libcpu/common 保持统一
2. 对 bsp/cvitek/cv18xx_risc-v 中增加使能 ARCH_RISCV_FPU 的动作。解决了 issue #9075
2024-08-27 00:46:41 -04:00
yandld 32635bb53a fix formmating issue 2024-08-27 00:44:34 -04:00
yandld 0179d7427a frdm-mcxn236
add uart5
add can support
add wdog support
2024-08-27 00:44:34 -04:00
yandld 6ef77d7d32 add wdog driver and refine default project 2024-08-27 00:44:34 -04:00
Fan YANG 0b1ba0f612 [bsp][hpmicro] add missing fence apis
- added missing fence apis

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
2024-08-26 10:41:15 +08:00
Fan YANG 6c085218a3 [bsp][hpmicro][hpm6e00evk] add hpm6e00evk support
- added hpm6e00evk support

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
2024-08-26 10:41:15 +08:00
Fan YANG e19b63e5fb [bsp][hpmicro] upgrade hpm_sdk to v1.6.0
- upgraded hpm_sdk to v1.6.0

Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
2024-08-26 10:41:15 +08:00
Z8MAN8 742dae7220 bsp: cvitek: Add timer driver
Signed-off-by: Shicheng Chu <1468559561@qq.com>
2024-08-25 12:11:57 -04:00
Supper Thomas 077e6889e8 [bsp/nxp] Add fixed lds 2024-08-25 22:57:52 +08:00
yandld 8ba75bddc3 [bsp][mcxc] initial commit for frdm-mcxc444 2024-08-25 10:55:17 -04:00
CXSforHPU 416ec66380
[device] add dev_ prefix for file names 2024-08-23 18:15:09 -04:00
Koen De Vleeschauwer edfc7d6201 [bsp/at32] static dma_isr() in hard_i2c and spi 2024-08-23 17:45:56 -04:00
LZerro e5382cb733 [bsp][Infineon][psoc6-evk-062s2]Adapt to RTduino 2024-08-22 22:58:49 -04:00
hywing d3b9480658 [bsp][nxp][mcxa153] add i2c driver 2024-08-21 17:35:19 -04:00
Z8MAN8 f5156774b2 bsp: cvitek: Canonically rename some macro definitions
Analysis: Some macro definition names are not standardized
and lack prefixes.

Solution: Add BSP_ prefix to GPIO_IRQ_BASE SYS_GPIO_IRQ_BASE
PLIC_PHY_ADDR TIMER_CLK_FREQ UART_IRQ_BASE I2C_IRQ_BASE.

Signed-off-by: Shicheng Chu <1468559561@qq.com>
2024-08-20 09:52:18 +08:00
Yilin Sun fea231407b bsp: nxp/mcx/mcxn/mcxn236: Remove invalid SPI8 entry.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-08-19 16:04:28 +08:00
Yilin Sun 42239863cf bsp: nxp/mcx/mcxn/mcxn947: Remove invalid SPI8 entry.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-08-19 16:04:28 +08:00
Yilin Sun a5780a341c bsp: nxp/mcx/mcxn: SPI: Use updated DMA mux enum.
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-08-19 16:04:28 +08:00
Yilin Sun fd3f603b27 bsp: nxp/frdm-mcxn947: FS: use generic SPI API.
This patch replaces SPI flash mount procedure with generic SPI API. This
patch also try to format the external flash on the first mount failure,
in case of empty or invalid flash content is present on the external SPI
flash.

Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-08-16 20:20:34 -04:00
Yilin Sun 12214dc18c bsp: nxp/frdm-mcxn947: WiFi: use generic SPI API.
This patch changed SPI initialization API to standard RT-Thread SPI API.
The current code contains a minor bug which does not wait for WiFi
module ready before stack initialization, this is also fixed.

Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-08-16 20:20:34 -04:00