xiao-mang
e46333496f
fix specified network card not taking effect with msh's ping error ( #8937 )
...
* fix specified network card not taking effect with msh's ping error
* fix specified network card not taking effect with msh's ping error
2024-05-16 15:43:50 +08:00
exxfire
90f86c2b71
netdev_unreg: modyify netdev remove logical when mutil-netdev exist
2024-03-18 20:39:15 -04:00
geniusgogo
3bc29c7673
sync update net. ( #8333 )
2023-12-05 23:09:19 +08:00
rcitachi
c06f4e98fc
[SAL] Update SAL,Add socketpair sendmsg recvmsg function ( #8293 )
2023-11-28 13:56:06 +08:00
xqyjlj
3283f54c7a
🎈 perf: perf rt_hw_interrupt_disable/enable ( #8042 )
...
Signed-off-by: Shell <smokewood@qq.com>
Co-authored-by: Shell <smokewood@qq.com>
2023-10-25 20:31:25 +08:00
guo
bd1763b979
[netdev] Add check if netdev->ops is null ( #7362 )
2023-04-24 17:06:54 +08:00
tyx
7ec14378ef
[net][netdev]Add more hook functions
2023-04-24 10:58:05 +08:00
tyx
8aaa57e2ea
[net][netdev]Use the interface to set the default netdev
2023-04-24 10:58:05 +08:00
hiro_655
786dce62c4
[Doxygen][components][net]Fix some comments ( #7280 )
...
修改了doxygen所报告的一些注释中的问题
2023-04-21 01:25:53 -04:00
yuanzihao
23786ee481
[GD32]add gd32470z-lckfb ( #7022 )
...
* --复制gd32450z-eval 作为立创梁山派 gd32470z-lckfb的模板进行移植
* -修改模板keil工程的配置,IROM需要注意总共为1024k,分为Code area 和Data area ,IRAM1为 : 512K-64K=448K=458752=0x70000。
-重新用ENV生成编译固件
片上SRAM可分为4块,分别为SRAM0(112KB)、SRAM1(16KB)、SRAM2(64KB)和TCMSRAM(64KB)。SRAM0、SRAM1和SRAM2可以被所有的AHB主机访问,然而,TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问。BKPSRAM(备份SRAM)应用于备份域,即使当VDD供电电源掉电时,该SRAM仍可保持其内容。附加SRAM(ADDSRAM)只在一些特殊的GD32F4xx器件中可用。由于采用AHB互联矩阵,上述SRAM块可以同时被不同的AHB主机访问,例如,即使CPU正在访问SRAM0,USBHS也可以访问SRAM1。
* -修改IAR编译的链接脚本
* --修改Flash和RAM大小
-RAM大小为448k是因为512K-64K=448K,其中后面的64K为TCMSRAM(紧耦合存储器SRAM)只可被Cortex ® -M4内核的数据总线访问,先不要乱分配
* -修改MDK链接脚本
* -修改board.h
* -修改MCU型号
* -Finsh控制台和LED1闪灯程序工作正常,串口控制台名称错误,从uart改为uart0
-Scons正常生成工程
* -发现GD32固件库当前没有240Mhz的时钟配置,将固件库升级为GD32F4xx_Firmware_Library_V3.0.3-发布时间为2023-01-04
* -修改bsp/gd32/arm/gd32407v-start/board/SConscript文件
* -修改led1和change logs
* -按照提交规范使能 One ELF Section per Function(MDK) 并用scons重新生成工程
* -发现整个GD32的IAR模板工程template.eww 是没有的,所以当前是不支持IAR开发的,需要后面学习一下IAR使用再实现了。
* -使用formatting源码格式化工具跑一边gd32470z-lckfb目录
* -使用formatting源码格式化工具跑一遍[components/net/netdev/src/netdev.c]
-三个月前的提交多了几个空格
2023-03-10 23:21:31 -05:00
geniusgogo
e29dfb75ca
Fix net ( #7034 )
...
* fix LWIP_HOOK_IP4_ROUTE_SRC.
* fix netdev ping select network card.
2023-03-10 16:16:41 +08:00
Man, Jianting (Meco)
99bdf978d7
[rtdef] use lower-case to define attributes ( #6728 )
...
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-12-11 13:12:03 -05:00
guo
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
Yohozzy
b64f21e628
Update netdev.c
2022-11-14 22:18:41 -05:00
dongly
3363586cbb
Fix some compilation warning ( #5744 )
...
* Fix some compilation warning
* 补充修正一些数据类型的使用错误
Co-authored-by: Meco Man <920369182@qq.com>
2022-08-02 12:09:49 -04:00
Tangyuxin
f5c88add37
Fix compiler warnings ( #6023 )
2022-06-08 01:21:50 +08:00
Meco Man
2575a93516
rename sal.h as sal_low_lvl.h
2022-05-16 10:02:22 +08:00
Man, Jianting (Meco)
6895da5307
[net] adjust folder structure ( #5587 )
...
* [net] adjust folder structure
- 将lwip相关的文件夹,移入lwip文件夹
- Kconfig 分散到at netdev lwip sal文件夹中,使用menuconfig代替menu
2022-02-20 00:07:45 +08:00
liuxianliang
8e518f234a
[fix] format
2021-11-15 15:58:31 +08:00
yukelab
cda78884aa
ping cmd with specified netif in lwip-2.1.2
...
using LWIP_HOOK_IP4_ROUTE_SRC hook find specified netif route, using
cmd `ping 192.168.xx.xx e0`, ping dest using e0 netif. if not found
netif, using default netif, the effect is same as the cmd `ping 192.168.xx.xx` that only ping with default netif.
2021-11-15 15:30:20 +08:00
BernardXiong
0b13409c16
[BSP] fix compiling issue with libc
2021-09-11 18:09:22 +08:00
Bernard Xiong
8da9f78d72
[libc] remove rtlibc
2021-09-11 11:07:51 +08:00
Meco Man
e18d44940f
[finsh] 修复由于移除finsh导致__cmd_xxx命令无法使用的问题
2021-09-05 01:57:26 -04:00
liuxianliang
865e34650c
[add] the function of set [internet up] status, activate the callback.
2021-04-12 18:11:37 +08:00
Meco Man
3c05a4e719
[compoenets] auto & manual formatted
2021-03-08 18:19:04 +08:00
xiangxistu
e02f3764bd
[delete] useless logic
2021-02-25 14:44:02 +08:00
xiangxistu
7a2ae46ecf
[fix] the wrong 'ifconfig' information for multi-network interface
2021-02-25 14:06:03 +08:00
xiangxistu
14ac354dca
[update] when close auto check internet status, shield internet status information.
...
Signed-off-by: xiangxistu <xiangxistu@foxmail.com>
2020-12-31 14:39:08 +08:00
yangjie
eeaf1fcc50
resolve Conflicts
...
bsp/nrf52832/board/Sconscript
bsp/nrf52832/startups/Sconscript
bsp/raspberry-pi/raspi4-32/driver/SConscript
2020-12-28 12:02:31 +08:00
yangjie
ef62febf1f
[SConscript]update group name
2020-12-19 16:49:11 +08:00
liuduanfei
963f35e96d
Update netdev.c
2020-12-18 20:53:33 +08:00
thread-liu
82eac71064
[update] Incorrect macro definition name and update jobs name.
2020-12-10 09:51:32 +08:00
yangjie11
ba83ddc3c4
[SConscript] change libcpu to LIBARCH,and correcte letter case
2020-11-30 15:52:43 +08:00
longtengmcu
962acc3313
1、修改宏定义的拼写错误,修改打印IMEI号时的打印错误
2020-11-22 20:05:53 +08:00
yangjie11
91261e25b9
[SConscript]rename group name
2020-11-20 13:38:11 +08:00
luhuadong
88a02d7bd8
fixed some typos
2020-05-09 10:33:36 +08:00
luanxueguang
a1dc525859
[update] 修复拼写错误
2020-04-02 13:50:09 +08:00
chenyong
438d17e27b
[net][netdev] fix IMEI spell mistake in ifconfig command
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-09-12 14:34:54 +08:00
chenyong
f39b44ce80
[network][netdev] Improve the ping command error log prompt
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-08-24 16:37:26 +08:00
chenyong
0d8a216260
[network][netdev] Improve the default netdev operation and format code
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-08-22 18:33:30 +08:00
tangyuxin
16304f14a8
[components][net] 1.网卡可卸载 2.dhcpd 服务可停止
2019-08-11 11:53:28 +08:00
tangyuxin
afd0140e67
[components][net][netdev] 修复一处BUG
2019-07-27 09:13:19 +08:00
guozhanxin
04296e97b6
[netdev] Add a non-null judgment to the netstat command.|为 netstat 命令添加非空判断。
2019-07-03 22:30:33 +08:00
chenyong
dcd8b8029b
[net][netdev] Delete network commands interrupt disable processing
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-07-03 10:49:19 +08:00
chenyong
48857d1e67
[net][netdev] Add FINSH_USING_MSH control for netdev network commands
2019-07-02 20:11:41 +08:00
chenyong
7d2ffe63e9
[net][sal][netdev] Add IPv6 option configuration and feature support in SAL and netdev
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-06-24 17:46:18 +08:00
chenyong
1f9a668607
[net][at] Fix socket create failed issue when default netdev mismatch.
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-05-28 16:25:42 +08:00
chenyong
4de0533a51
[net][sal][netdev] Delete the link_up status judgment in the send/recv interface
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-05-10 15:57:58 +08:00
chenyong
7424e44e20
[net][netdev] Add default netdev automatic change features configuration
...
Signed-off-by: chenyong <1521761801@qq.com>
2019-05-05 20:35:01 +08:00
HubretXie
2d82b62111
Update netdev.c
...
根据family查找netdev时,优先查找family匹配并且已经联网的网卡
再查找family匹配但是未联网的网卡
2019-04-28 15:24:23 +08:00